SUMIF in a table in the expansion

Similar Questions

• Subform with table with the expansion of fields - please help!

  I am a new user of LiveCycle Designer ES and need help with a form.  I made so many changes in the form I've now lost track and don't know where start set the following two questions:

  • The shape itself is a Master Page that needs repeating, based on the amount of data entered.  This is not the case.
  • In the form is a Table to the expansion of the fields.  That's when the last field is full that I need a new page created.
    • Also, as the table grows, it overwrites the footer, which is a subform.  The footer is set to have a top margin (. 25).

  Any help would be appreciated.  Thank you!

  It resembles a station of the cross.  See other thread here...

  http://forums.Adobe.com/thread/489453?TSTART=0

• making line for the current line on the expansion table

  Hello
  
  I use JDeveloper 11.1.1.5.0
  
  I have a table with facet detailstamp enabled. Each line is to have an arrow icon to expand this line.
  
  My problem is that line expand action seem to work independently with the selection of rows in the table. When I develop a line, it does not only rank as current. I tried with the code below to make the line of the current table, but could not do.
  

      public void makeCurrentRow(RowDisclosureEvent rowDisclosureEvent) {
          usersTable = (RichTable)(rowDisclosureEvent.getSource());        //usersTable is the binding of the table on the page
          RowKeySet discloseRowKeySet = usersTable.getDisclosedRowKeys();
          usersTable.setSelectedRowKeys(discloseRowKeySet);
  
          AdfFacesContext.getCurrentInstance().addPartialTarget(usersTable);
      }

  Please let me how can know I do the table row under the current name on the expansion of this line.
  
  Kind regards
  Fox

  I implemented a sample here http://tompeez.wordpress.com/2013/04/12/make-disclosed-row-the-current-row-when-using-a-detail-facet-of-a-table/

  Timo

• SUMIF line is equal to the value of test and the line below is '-'

  Hello

  I have a spreadsheet numbers where a column has a list of names that are mixed with rehearsals and another column that has a value of profits to this name list.

  Now, I want to determine the total profits from each of the names so I can see the total profit by name.

  That part is easy, I just a SUMIF function that checks if the name corresponds to a specific name, and then adds the benefit altogether.

  The problem I have is that in the names column, sometimes I'll have a name and then the next rows are just '-' indicating that they are of the same name. The SUMIF function that I use does not takes into account these values because they obviously do not match the name of the interest.

  So my question is: is it possible to create a function that will check for a matching name and then if the next line '-', then add this value to the total as well. It has to work with several rows of '-' after the name.

  The screenshot below is an example of what I mean because I realize that it does not have much sense.

  

  So in this case, the total of Jess profit would be = 5 + 35 + 15 + 5 + 15 = 75

  and the benefit of Gill = 30 + 30 + 20 + 40 = 120

  I hope I did it is clear enough. Thank you in advance!

  Oscar

  Hi Oscar,.

  Although it is possible to do, it will be a little clumsy, involving additional columns. It would be much easier to stop using the "-" and use the actual names instead. Order the popup format to create a list that makes it easy to list the names.

  Quinn

• By the numbers, how do the list tables on the side?

  By the numbers, how do the list tables on the side? It used to be on the side, now it is on the top which is a huge pain.

  This changed in the transition from Numbers2.x too 3.x.

  Unless you explicitly removed numbers 2.x, it is always installed and usable on your computer.  You can locate it in the folder "/ Applications/iWork ' 09.

  You should be aware, that numbers 2.x cannot open files saved numbers 3.x - you can export files from Numers3.x back to Numbers2.x by using the item of menu numbers 3.x "file > export to > number ' 09»

• expand the category drop-down list table in the model of checkbook

  Using version 2.3 of numbers 09.  Try to understand the model section for checkbook and to expand the available categories in the menu drop-down allows to assign a category to an entry in the checkbook.  Where would we go to learn this procedure.

  Hi Robert,.

  This is as good one place as any.

  If you have started using the model and have defined categories for all operations, make changes to the cells in these rows. Fill the pop-up menu edited cells wil also reset the value of each cell filled to the currently selected value in the source cell to this filling.

  Add new categories to a cell in the context menu

  In the Transactions table, click any cell to the row and column reference tabs appear.

  Line control grip (red arrow in the image below) and drag to the bottom to add a new line. The new line will contain a new copy of the cell from the popup menu in the category column. Click this cell to select it.

  In the bar of buttons above the workspace, click the Inspector button to open the Inspector, and then click the format cell [42] button to go to the cell format Inspector.

  You will see the list of the menu items for the selected cell. The list below are a pair of buttons marked + and - (blue arrow). To add a new item to the menu, click on the button +.

  

  The new item appears at the bottom it has the list, with its highlighted text as shown. Type the new category name.

  Repeat for as many new features that you need.

  You can also edit the items already in the list.

  Double-click an existing item to select the text. Type the new name for the item.

  When you are finished, close the Inspector.

  The menu changes are applied immediately and affect only the menu in the modified cell, and cells, this version of the menu is filled in. If you add a new line to the bottom of the table, for example, the edition menu of line 15 will be filled in the new line.

  Add a new category to the account categories table

  The new category is not automatically added to the category table account. When you add it, ensure that there is an exact match between the label of the table and the category in the menu.

  Click any cell in the account categories table to select it.

  Enter the line control handle and drag down to add as many lines as necessary.

  Note that the totals in a footer line moves down and the new lines are added above it.

  Fill in the new lines of the new category (or categories). *

  If you have completed transactions for these categories, these will be totaled in the B column and adds the total in the footer line, but not yet appear on the pie chart.

  

  Add the new categories on the pie chart

  Click the pie chart to select it and show its data source.

  

  Data for the graph comes from the cells defined by the selection (in blue) rectangle. The cells shown in white on a background come from the chart legend labels black in column A of the table in the colors of the wedge can be seen in the box beside the category name (and can be changed by clicking on the box, and then choosing a new color in the fill color in the toolbar).

  To add the new category to the table, place the mouse pointer on the small handful (circle in the lower right corner of the selection rectangle. When the pointer changes into a Black plus sign, click and drag down to lock the new categories, which will be instantly assigned a color and added to the graph.

  Click anywhere outside the objects onscreen to deselect all objects, and then save your work.

  * To ensure matched spelling between the menus and the list of categories, select one of the new cells of menu and copy. Select one (or all) cells new category on the table of the types of accounts and paste. Specify each menu to the new categories, and then select all the cells in the new category. In the format of cell Inspector, use the context menu to change the format of these cells to the text. This removes the attribute from popup menu of the cells, leave the text as it was when the last value.

  Kind regards

  Barry

• Limit on the expansion of network?

  I have 3 AirPort Extreme base stations, 2 are 5th generation and a 3rd generation. I also have an AirPort Express in the mixture. I have a 3rd generation connected to the FiOS router and I consider that it is the "primary" router Initially, it worked. I had 2 Extreme extending by connecting to the 'main' and the Express has been connected to one of the Extreme 2 extension. This morning, an extreme extension 2 has been disconnected. The error was that he was unable to expand the network. I checked the range and it's well within 100 feet of the central station. I checked the network password and that's OK. I unplugged the other extreme, which extends and restarted then that gave the error. This time, he connected very well to the main but when I turned on the other that I had turned off, he started too give the error of not being able to expand the network.

  Yes, is there as a limit to how many base stations can connect to one to extend a network?

  I checked the range and it's well within 100 feet of the central station.

  100 feet is quite far away... even if you have line of sight between the main airport and the airports of their extension. If there are walls on the signal path, get a good signal for extending airport is going to be quite a challenge.

  The golden rule for the placement of an airport that will extend wireless is the place to a point that is about halfway between the airport and the area that needs more wireless coverage.  For example, if you need more wireless coverage has a few rooms at the other end of the House, extending airport would be located in between the main airport and the other end of the House.

  The reason is that the airport expansion "to extend" the quality and the speed of the signal it receives. If it is located too far from the main airport, then it gets a signal low and slow to expand, so there are few vested benefits.

  I had 2 Extreme extending by connecting to the 'main '.

  Understand that.  If all goes well, the two extremes are found as they are at equal distance between the main airport and each Extender... And each extension's closest major airport that it is another extension unit.

  and the Express has been connected to one of the Extreme 2 extension.

  The Express is unable to extend the signal to a device that is already expanding the network. In other words, you can have multiple devices, the expansion of the network, but each extension must connect directly to the main airport... not at another airport that already is the extension of the network.  In your case, the AirPort Express is actually 'join' the network... so it will work for AirPlay or a printer USB remote... but the Express provides no additional wireless signal coverage in this type of installation.

  For the moment... try turning off all the... from the 'main' airport and all other airports.

  Wait a few seconds and then starts the 'main' airport and run a minute or two

  Turn on one of the extreme airport which extend the network and let it run for a minute or two

  Assuming that the AirPort Extreme that works you just turned correctly, turn on the other AirPort Extreme

  Post back your results, and we are going to discuss options for the Express.

• How to create a second table containing the first?

  I have a table with data source. I would like to create a second table that feeds these data. I will use the second table for the filtered views, etc. I am currently copying a range of cells through, referring to table 1. However, if a new line is added to table 1, it does not table 2. How can I configure things so that any changes - including the new lines/columns would be automatically carried over to table 2?

  Table 2 cannot automatically grow the new rows or columns. If you want it to be completely 'automatic', your second table must be as large or larger than your first picture will be never. In other words, there need to additional rows and columns to allow growth. If is not bigger than 1 table, when you add rows or columns to the table 1, you must also manually add rows or columns to the table 2.  The problem is that all these lines/additional columns in table 2 will have formulas that are referred to non-existent rows/columns in table 1, which is a mistake. What you do next depends on what you do with table 2. If it is just for display of data and your existing formulas are all as = 1::A1 Table, you can change to = SIERREUR (array 1::A1, "") to get rid of the errors.  To hide all blank lines, you can set up a filter to show only the rows where column A is not a space (for example) character. There is no filter to hide additional columns, however.

• create containers in the table of the container in the locals or file globals in teststand through Labview

  Hello

  I'm trying create table containers and in different containers, which contains items with different values.

  For that I use for example Excel file and in it, I create a single table, first line is the element name and second row is the value of the element and even to the third row is also different values.

  I want to create under container in the tables of the container as first line must be the element and the second row's value and after reading the second row his creates the new container because again first row must be the element and third row should be the value of the elements and even for the next row.

  here as an attachment, I tried to do, but how I am not able to create one any container according to the line changes. Please guide me how to solve this problem

  Thank you much in advance.

  Kind regards

  Ankit.

  No, I have not found the right solution for it.

  I posted this in wrong thred, I wanted to just delet this post. but in some way, I have not found where delet.

  That's why I just mark it as resolved, if it is no more worth.

  But in any case here as an attachment it is vi, which is at least capable of create table containers in teststand.

  what I want is to create the table container, and teststand with subcontainers.

  Agin thanks for any help.

• How to add channels to a channel table in the display panel in the script

  Hi all

  We try to put in place a review tool video using DIAdem, and we want to fill the results which have already been analysed in a Panel. This means populating a channel table in this Panel with the necessary data, but we cannot find a way to add strings to a table in the script. It seems that it should be very simple, but we can not find!

  Thank you

  Peter

  Hi Peter,.

  Yes, it's simple. You prepare your VIEW with the channel table layout and use the add on the columns collection method.

  The command might look like this:

  VIEW. Sheets (1). Areas (1). DisplayObj.Columns.Add("myGroup/myChannel")

• How to put a property group in a related curve with the Expansion curve text label

  Hello

  I'm working on a graph which trace a WaveFormChannel named 'Test '. Given that I enabled the expansion of the curve, the graph shows all channels named "Test" in the DataPortal. Now, I want to put the value of the property of the "MyGroupProperty" group in the legend, so whenever I add a new group, automatically add the new "Test" signal and show "MyGroupProperty" in the legend.

  So far, I tried to use the curve text in the option of the label, with something like this

  @GroupPropGet (GroupNumber, "MyGroupProperty") @, but I have to give the value of GroupNumber, and then it shows the same value for all signals. So if I add a new group to the dataportal with a Test string, the legend shows the label of the new signal, but the MyGroupProperty remains the same for all labels

  

  Thanks in advance for your help

  Hi dslemusp,

  You can use the global 'CGI' variable in a tiara expression to provide the current Index of the traced (even in expansion mode) group.  I've prepared an example that illustrates this and attached it below.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• How to remove columns from the table on the master 1-0?

  I have an array of 96 columns with strings. I also have the array of int 96-elemets (mask) with 1 and 0.

  What I want to do is to is to remove (or hide - but I read that it is not possible) all the columns with index corresponding to 0 in the mask table.

  example:

  columns in the table

  1 2 3 4 5

  mask

  0 1 0 0 1

  I want to remove the columns 1, 3 and 4 and leave only 2 and 5 in my table.

  How can I do?

  If I create loop for with i as the index of the column, when I do DeleteTableColumns() columns number decreases, and I get an error of range out of

  Or do I have an option to hide the unnecessary columns (not set their width to 1, it's very ugly-looking)?

  Please help me (())

  Hello rovnyart!

  1. removal of columns in the table:

  I suspect that the reason why you get the out-of-range error is due to fact that in your loop, you delete the columns in the table, you'll eventually end up by referring to a column that no longer exists, because the other columns before it have been deleted. While you remove each column of your table in the loop for example, the column index number will move, because you deleted the other columns in front of her.

  To resolve this, even if you delete a column in your loop, make sure that you take also into account that the index of the column is moved because of the removed columns.

  2 hide columns in table:

  You can use the ATTR_COLUMN_VISIBLE attribute to hide columns in the table:

  http://forums.NI.com/T5/LabWindows-CVI-idea-exchange/add-attr-column-visible-attribute-for-table-Col...

  http://zone.NI.com/reference/en-XX/help/370051Y-01/CVI/uiref/cviattrcolumnvisible_column/

  3 alternatives:

  Note that another alternative would also use a tree instead, control as the tree control also supports the hidable columns:

  http://forums.NI.com/T5/LabWindows-CVI/table-hide-column/TD-p/569773

  Best regards!

  -Johannes

• At all indexes on tables of the same value in the structure of the event

  Hello

  I have a panel with the four bays and I use a structure of the event.

  Now, I want that change of the index of array_1 also affects the index of 3 other tables at the same index.

  But there is only a property "value Exchange" and no property 'index-change' in the properties of the table.

  So I read the 'index' property and write in the other table.

  But: It seems as if I have to do so within the period of waiting-section of the structure of the event.

  Is there another way to do this?

  Thanks for help

  You can use the mouse event on each table to detec the event (of course, that will attract not only a change of index, but I don't think you care too) and then use the 'values of the indices' property on all the table to set.

  See annex VI (LV2012), hope this helps

• Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

  Hi all

  Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

  I did program mentioned above but it does not work. Can you tell me what is the problem?

  There is no error is indicated in the program. If someone knows about it please try to find solutions and help me out of this problem.

  I have attached my program with this message.

  Thank you in advance!

  (1) FOR loops are your friend here.  You can make a slight restructuring using loops, and then you will have less mess to deal with, the inner loop through tunnels of autoindexing to make it even simpler.

  (2) I would only treat the numeric values of the characters.  So go terminal of control of the chain, the capital letters and byte array to before the outer loop.  You can use a size of Board over there to tell how many times the outer loop to iterate.

  (3) the Index table is extensible.  So you only need over the index of the first, and it will increment itself, as it develops.

  (4) you need to finish the lookup table (table 3D)

• How to print got string in buffer in a table at the front end?

  Hello. I want to print the string obtained in buffer in a table opposite end. I play serial with a machine, where I'm supposed to place an order to get the answer. The machine I'm trying to communicate has 6 cylinders, when I pass command 'b', it sends the values of the bottles as a string. Example: when 'b' is passed, I get "b 50.8 54.8 60.2 65.3 57.0 61.6" in buffer. I want to put these values in a table at the front end. Can you please give a tip / solution to my problem? I have attatched the vi. Thank you.

  Hi Madara77,

  Table is an array of shots, first think about how you can get the array from the string above,

  Here you need to parse the string correctly, for the string "b 50.8 54.8 60.2 65.3 57.0 61.6"

  1. remove the space first and the last, removal of b , (use the subset of the string function ( )

  2. now you have ' 50.8 54.8 60.2 65.3 57.0 61.6.

  3. now try to get the table on top of the string based on usage worksheet of array of strings

  (a) use the delimiter as space constant.

  Table 2D b) array type as a string

  Now, just wire this scoreboard table.

  It will be useful.