Sun Identity Manager: Error on configuration of Sun Role Manager WebService

Similar Questions

• Cannot install identity server: Error 20: Configuration of identity

  HI I am trying install IDM system as indicated below the order.
  
  Oracle DB-> DIO (two Instance OID1 & OID2 on separate RHEL5 box)-> OVD (OVD1 & OVD2)-> OAM
  
  I managed to install this configuration until OVD. But once I started the installation of the identity server, installation is the break with the error "Setup.product.install, com.oblix.installshield.ObExecWizardAction, committed an error, an error occurs." Please try again. Error 20: Configuration System identity already exists on the specified LDAP directory server. »
  
  Before my comrades of the few tried to install identity server without success that is why maybe right now I am not able to install it again.
  
  Let me tell you how I got above error.
  
  Installation of server identity request information from the server directory twice. First time I chose option as 'Data anywhere' and after that, I gave details of the OVD (IP/Ports/cn = orcladmin/password) and I got above error. I ignored the error and continue with the installation and the second time I chose options like "Oracle Internet Directory" and provide clarification of the OID. Yet once I had the same kind of information.
  
  So I droped UCR and reinstalled OID (not OVD) and tired installation of identity but no luck received the same error at the first stage (OVD/data anywhere). This time I didn't continue with installation.
  
  Please help me solve this problem, and I also want to know how to remove the server Idenitity information leave OVD (OID too for later use).
  
  Thank you.
  
  Published by: 985360 on February 1, 2013 09:57

  Hi Phil,

  The error message "Identity System Configuration already exist on the specified LDAP" complains that the schema of objects required by OAM already exsit on the ldap specified. The schema update must be run once (usually the first installation of server identity, even if it can be performed manually as a stand-alone operation) on each ldap instance, after what retrofitting of identity is not required this step, which can be avoided by not responding "" when asked if this is the first server to identity must be installed.

  In order to check if these schema objects are in your ldap, look at the diagram for a large number of classes of objects oblix * and ob * attributes - if they are there then the schema has been added. OAM only supports the OVD as the user ldap, not the configuration store store. When you install a server identity, it is necessary to give the OID (in your environment) as the configuration store and installation will be blessing the OID_oblix_schema_add.ldif file to update the schema of the OID. When you specify the user as OVD store, OAM adds VDE_user_schema_add.ldif to the OVD schema.

  I think that your schema objects can be good, but if you want to clean your directory, you can use files from * delete.ldif provided (all ldif files are in identity, oblix, data, common) for ldap servers and start again.

  Kind regards
  Colin

• Error in Configuration Oracle Identity Manager

  I used for the Installation of versions:
  
  Version of the software
  11.2.0 Oracle database
  11.1.1.5.0 repository creation utility
  10.3.6 Web logic
  SOA Suite 11.1.1.6.0
  Fusion Middle ware Installer 11.1.1.5.0
  1.6.0_29 JDK Oracle JRockit JDK or Sun JDK Web-logic
  
  Error: Failed to Config Action Oracle Identity Manager Configuration
  
  Waring exception occurs in the web logic Server:
  
  < 14 August 2012 11:57:53 AM GMT + 05:30 > < opinion > < WebLogicServer > < BEA-000360 > < Ser
  worm started operation >
  < 14 August 2012 12:03:49 PM GMT + 05:30 > < WARNING > < management > < BEA-141239 > < the No.
  n-dynamic attribute AuthenticationProviders on weblogic.management.security.Real
  mMBeanImpl@581c390c([OIDM]/SecurityConfiguration[OIDM]/Realms[myrealm]) has been
  has changed. He will have to redeploy or configured restarts entities >
  < 14 August 2012 12:03:49 PM GMT + 05:30 > < WARNING > < management > < BEA-141238 > < a non -.
  dynamic change has been made which affects the AdminServer server. This server m
  UST be restarted in order to consume this change. >
  < 14 August 2012 12:03:49 PM GMT + 05:30 > < WARNING > < management > < BEA-141239 > < the No.
  n-dynamic attribute ControlFlag on weblogic.security.providers.authentication.De
  faultAuthenticatorMBeanImpl@80d076be ([OIDM] / [OIDM] SecurityConfiguration / kingdoms [m)
  (yrealm] /AuthenticationProviders [DefaultAuthenticator]) has been changed. This mastery
  There require redeploying or configured restarts entities >
  < 14 August 2012 12:03:49 PM GMT + 05:30 > < WARNING > < management > < BEA-141238 > < a non -.
  dynamic change has been made which affects the AdminServer server. This server m
  UST be restarted in order to consume this change. >
  
  Please give me a solution to fix the problem

  You can download 11.2.0.2.0 to the last database and through delivery.

  -Kevin

• Error fix Oracle Identity Manager 11 GR 2 PS1 BP01 bundle

  Hi all

  I get the following error when applying BP01 for PS1 OIM11gr2 in section 4.3.1 patch servers Oracle Identity Manager of Managed on WebLogic Server.

  patch_automation:
  [entry] jump entered as property IOM. DBPassword has already been set.
  entry entry jump as mdsDB.password property has already been set.

  wls_property:
  entry entry jump as weblogic_password property has already been set.
  entry entry jump as oim_password property has already been set.

  Run patched sql files:

  BUILD FAILED
  C:\Oracle\Middleware\Oracle_IDM1\server\setup\deploy-files\automation.XML:188: The following error occurred during the execution of this line:
  C:\Oracle\Middleware\Oracle_IDM1\server\setup\deploy-files\automation.XML:121: Class not found: oracle.jdbc.OracleDriver JDBC driver could not be loaded

  Total time: 0 seconds

  I join my file patch_oim_was.profile.

  # For the passwords if you don't want the password < / optional > in this file just comment out him from here, you will be prompted for him in rumtime.

  Variable #Neccessary of [mandatory] env
  ANT_HOME is C:\Oracle\Middleware\modules\org. Apache.ant_1.7.1
  JAVA_HOME=C:\Java\jdk1.6.0_45
  mw_home = C:\Oracle\Middleware\
  oim_oracle_home = C:\Oracle\Middleware\Oracle_IDM1
  soa_home = C:\Oracle\Middleware\Oracle_SOA1
  WebLogic.Server.dir=C:\Oracle\Middleware\wlserver_10.3

  #weblogic configuration variables
  weblogic_user = weblogic
  #Password is optional, if you want to give on the terminal itself leave what he commented. If not, uncomment it.
  weblogic_password = Weblogic123$
  soa_host = localhost
  soa_port = 8001

  #DB configuration variables
  operationsDB.user = DEV_OIM
  # Password is optional. If you want to give on the terminal itself leave he commented. If not, uncomment it.
  IOM. DBPassword = Sysadm10
  operationsDB.host = localhost
  operationsDB.serviceName = oimdb
  operationsDB.port = 1521

  
  mdsDB.user = DEV_MDS
  #Password is optional, if you want to give on the terminal itself leave what he commented. If not, uncomment it.
  mdsDB.password = Sysadm10
  mdsDB.host = localhost
  mdsDB.port = 1521
  mdsDB.serviceName = oimdb

  oim_username = xelsysadm
  #Password is optional, you can put it here too (and also uncomment the line) oth otherwise leave it as it is and you will get invited to do during execution AsString hidd en
  oim_password = Weblogic123$
  t3 = oim_serverurl: / / localhost:14000

  Thank you

  
  

  I have it... Document Oracle error. Use "/" instead of "------" in windows 7.

  Variable #Neccessary of [mandatory] env

  ANT_HOME = C: / Oracle, middleware, modules, org. Apache.ant_1.7.1

  JAVA_HOME=C:/Java/JDK1.6.0_45

  mw_home = C: / Oracle/Middleware

  oim_oracle_home = C: / Oracle/Middleware/Oracle_IDM1

  soa_home = C: / Oracle/Middleware/Oracle_SOA1

  WebLogic.Server.dir=C:/Oracle/middleware/wlserver_10.3

• Error during installation of Oracle Identity Manager

  Hello
  I'm having a problem when trying to install Oracle Identity Manager. I'm trying it now for two days and it's always the same problem.
  
  I have read this thread:
  Oracle Identity Manager Server installation problem (but still have no idea what to do).
  
  I'm installing in a virtual lab environment (Windows Server 2008 on VMware).
  This is a new installation.
  
  Installation scenario:_
  * 1.* Oracle Database 10g (10.2.0.3)
  * 2 Suite DBA of Toad for Oracle
  * 3.* Oracle Weblogic Server 11g R1
  * 4 Oracle Identity Manager v9.1.0.1
  
  * 5.*
  Then I create a new instance of database Oracle for Oracle Identity Manager as described here:
  http://download-East.Oracle.com/docs/CD/B32386_01/generic.902/b32140/database.htm
  
  * 6.*
  Then I prepare the DB for Oracle Identity Manager by running:
  prepare_xl_db.bat C:\Oracle\product\10.2.0\db_1 xelsysadm xeltbs C:\Oracle\product\10.2.0\oradata xeltbs_01 TEMP password123 password123 XAVIER
  
  as described here (preparation of the database under Windows):
  http://download-East.Oracle.com/docs/CD/B32386_01/generic.902/b32140/database.htm
  
  * 7.*
  I get no error after you run the script is finished
  
  * 8.*
  Then I run Oracle Identity Manager v9.1.0.1\OIM9101\installServer\setup_server.exe
  
  * 9.*
  I'll take the steps and after the installation of the error pop ups next:
  
  Following error occurred during the creation of connected scheme*.
  Error occurred while loading database script*.
  +...\Oracle identity Manager v9.1.0.1\OIM9101\installServer\Xellerate/db/oracle/xell.sql+
  Contact your DBAORA-06550: line 1, column 7: PLS-00905: object SYSTEM. PIN_OBJ is invalid ORA-06550: line 1, column 7: PL/SQL: statement ignored [07/10/09 12:18]*.
  
  * 10.*
  Then I click Next and this message pop ups:
  
  Install oracle Identity Manager found that SetDBKey.bat failed. *
  
  * 11
  Then the installation ends / dropouts
  
  
  Does anyone have an idea what is talking about this error and how to get around?
  I would be really appreciated. I'm getting desperate, because I don't know what I'm doing wrong. I thank very you much in advance!

  Make sure that the IOM database schema is created.

  This error is usually tied when the user 'SYSTEM' is used as a schema of the IOM. IOM does not account for database support as its schema SYSTEM.

  After executing the prepare_db.sh, connect to the database using schema IOM to itself, if you have connectivity.

• Forefront Identity Manager 2010 R2 - application of Architecture

  I wan unable to find the appropriate section while posting this question. Kindly move this question to the appropriate section.

  If am deploying Forefront Identity Management (FIM of Microsoft) on a single server environment (which means that FIM Service & FIM Synchronization Service will be installed on a single system that is running Windows server 2008 or Windows Server 2008 R2, right?) and I want to use IBM DB2 & IBM Directory Server or database Oracle and Sun/Oracle Directory Server what I have to install Active Directory (AD DS) on a Windows 2008 server where the FIM and the FIM Synchronization Service will be be installed?

  And, how will this work if I want to deploy in a Cluster environment?

  Say, my FIM Service is installed on the computer has, FIM Synchronization Service is installed on the Machine B. Can I install the database (DB2/Oracle) and the directory (IBM/Oracle) on one server (IE Machine A or B)? Or can I install this on a third system i.e. C Machine ?

  If installed on 3 systems, claims one AD DS anyway for these 3 systems to communicate? Or if it'll work if these 3 systems are implemented as local servers to windows?

  If the answer to the first part of the question above (in bold) is AFFIRMATIVE and the FIM deployment is expected in a cluster environment, and I intend to use other providers database & Directory Server, no matter what either installing Server DB2/Oracle Database & IBM/Oracle Directory should I install Domain Services Active Directory?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• VMware Identity Manager™ 2.4.0.0 build 3035173 from internal database creation

  Hello

  I try to configure Identity manager 2.4 (VMware Identity Manager™ 2.4.0.0 Build 3035173)

  I'm stuck on the creation of the database, he told me that the field "organization" is empty and that these are invalid characters

  I saw a thread open on the same subject since September, but there was no follow-up to the top.

  Thanks in advance for the help.

  You happen to have a screenshot?

  Don't forget that you need to access Web Assistant using a FULL domain name. You can not only use the name of host or ip address... If you create db error will be...

• Cannot install identity management

  HY there.
  I tried to install the management of identities for some time now, I was not able to do.
  I read on countless post thread, official documentation, etc., but I'll leave an error for error and never reach the end.
  I have a Windows 7 x 64, with jdk 1.6.46 installed machine.
  I want to install Oracle Identity Management.
  For this I need the database, the application (weblogic) server and the UCR.
  I installed the latest database available (11g), that the latest version of the UCR has used to create the schemas.
  I then installed wls 10.3.6.
  Then I install the latest version of identity management, and I always get an error on the part of configuration when it tries to start the server identity.
  My question is this: which version of each software component do I need?
  I mean, I saw that I can not use the latest version of everything and work. N ° it seems that according to I want to install it, I need a specific version of the different software.
  So let me rephrase my question:
  What version of these do I need to install identity management:
  -jdk
  -database
  -UCR
  WLS-
  -identity management
  
  Thank you

  Have you created the domain? If so, make sure that admin server is running. Before installing the management of identity you need to install the soa Server. To configure the IOM, adminserver must be in working condition.

  Kind regards
  Sunil

  Published by: sonya sharma on June 6, 2013 22:49

  Published by: sonya sharma on June 6, 2013 22:51

• The Peer Name Resolution Protocol service (PNRPsvc) or peer network (p2pimsvc) Identity Manager service does not work

  I get the following error message when you run windows network diagnostics. I ran the diagnosis because I have a network with Win 7 Ultimate 64 bit on a computer and WinXP 32 bit on the other.  Curiously, I can easily see and manipulate all files through the firewall of Windows XP. Either way, Windows XP can not see files on Win7. I can drag files to the shared folder, XP can see them, but can not open the same when I enable the share using Win7.  I can see the Win7 computer name and I have a home network without password. When I click on the folder with XP, the error popup grey box says that I might not have permissions to access these files. Contact the administrator of systems etc. My network has the same name on both computers, so I feel totally betrayed by what is happening here. There should be no problem but there is a.

   

  I get this error message when you run windows network diagnostics:

   

  The Peer Name Resolution Protocol service (PNRPsvc) or peer network (p2pimsvc) Identity Manager service does not work, The Peer Networking Grouping (p2psvc) service depends on these two services to work correctly

   

  I've followed these tips nothing does not:

   

  ·                                                                                                                                                                                                                                                     To see which services are/are not running click on the ORB start and type Services in the search box at the bottom of

  the menu. Select Services results.

  Check the columns of type status and commissioning for "Start" and "Manual".

  Those who are not running, then select properties in the right click menu.
  Click the startup type box and select manual in the menu, then click on apply, then OK at the bottom of the window.
  Now try to Start the service for the option in the main window.
  Try the homegroup connection, if the service starts

  Try a reboot if all goes well. The settings may or may not stick!

  Scroll down the page until you see the following...
  Select Services results.

  Hi MarkWebber,

  Method 1: I suggest you to follow the link provided below to start your computer in safe mode with network.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If it works fine in safe mode with network, try to put your system at startup mode minimum state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Studied the problem and found the solution. A file has been corrupted and remove he got running PNRP service. The file has been re-created correctly when the PNRP service started upward. Here is the file for future reference:

  'C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore.sst'.

  Hope this information is useful.

• How to fix Peer name resolution Protocol (PNRPsrvc) Service or Peer Networking Identity Manager Service (p2plmsrvc)

  How can I fix Peer name resolution Protocol (PNRPsrvc) Service or Peer Networking Identity Manager Service (p2plmsrvc)?

  Hello

  1. do you get any error message related to name resolution Protocol Service by peers or Peer Networking Identity Manager Service?

  2. the performance of the computer is made?

  3. were there any changes (hardware or software) to the computer before the show?

  Make the SFC (System File Checker) scan and see if the problem occurs.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Hope this information helps.

• Homegroup that my pc can't find the other pc, it seems that the Peer Networking Identity Manager service is not running. How can I make it work

  I lost contact with other computers in collective housing. It would seem that the Peer Networking Identity Manager service (p2pimsvc) does not work. How can I make it work?

  Hi Ken Jones571,

  ·         Did you do changes on the computer before the show?

  I suggest you to set the service to automatic and check if this is useful.

  a. click the Start button and type Services in the Start Search box and press enter.

  b. find the Peer Name Resolution Protocol (PNRPsvc) services or services Peer Networking Identity Manager (p2pimsvc), set it to Automatic to clicking on the service and selecting Properties and change the Startup type to Automatic.

  Method 1: I suggest you try a clean boot and check if the problem persists in the boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 of the article mentioned above.

  Method 2: It could be that the NVRP svc and p2pimsvc is corrupted, remove entry can help you solve your query. Check the following location and delete the file idstore.sst

   

  C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore. OSH

  Let us know if that helps.

• Prerequisites for Oracle Identity Management

  Hello

  I intend to learn and get the basics of the identity management.

  Could you be it someone please let me know, how to start it and what are the software needed for this.

  Thank you

  1. first of all you must decide will use you separate server or single server architecture. In my case the size of the Server DB is about 35 GB, IOM (WLS + SOA + IdM) server about 30 GB.

  2. also take into account the fact that DB and IOM are intensive systems of record.

  3. you should have 2-3 GB of RAM to DB, approximately 1 GB for AdminServer, 1 to 1.5 GB for SOA and 1.5 to 2 GB for IOM. Configure your appropriate servers.

  4. as for me, virtual servers are very useful especially for learning. I've used VirtualBox and VMware.

  As for me OS + DB + JDK (or JRockit) + WLS + SOA + IdM are sufficient. And remote control to create patterns of IOM. The other depends on your goal.

  SQLDeveloper simplifies the study of the structure of database. But you can use sqlplus to the same uses.

  AD is necessary if you plan to make the integration of ads. But in this case, you also need:

  • Connector server
  • AD connector
  • JDeveloper to develop plugins, adapters

  To access LDAP, you can use Apache Directory Studio which is free. Or just use the ad itself.

  Here you can find Labs - 12 | September | 2012 |.: Codigoctm:..

• View 7, Identity Manager 2.6 and Windows authentication, and whether or not real SSO is required for Kerberos

  I am trying to configure our environment so that users can open the Identity Manager web page and be automatically authenticated via their currently logged on credentials of domain.  I activated the Windows authentication and configured Kerberos in Identity Manager.  However, when you select a pool of offices a command prompt is received always ask the user password.  I read https://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2143567 and understand that maybe expected behavior.  True SSO would solve this problem?  I read that true SSO supports Kerberos.  Is there another way?  The general objective is to allow the user to log on to Windows and be able to access the office pools and applications through identity web page Manager uninvited credentials again.

  I just wanted to know all that true SSO did indeed me reach my goal.

• LDAP users in the repository Identity Manager (Administration tool)

  I was connect LDAP server then I need to change the level of logging in the user
  but I can't see the domain users on the identity of the directors of Bi tool Manager
  
  Identity Manager of the Administration of BI tool - error was:
  
  [nQSError:43113] The message returned by OBIS.
  SecurityService::assertUserWithLanguage [OBI-SEC-00018]
  Identity found "domain_user_name_here", but could not assert
  
  Published by: user11957406 on June 5, 2013 13:48

  Try this, whatever your question
  Tools-> utilities-> options-> repository and set the logging level.

  Thank you
  http://cool-bi.com

• To start the Oracle Identity Manager how much RAM is required?

  To start an Oracle Identity Manager and access, how much RAM is required? and with what amount of RAM required.
  
  Tell me any how to set JVM has increased.
  
  Using Oracle VM for Identity manager and the use of the RAM of 1300 provided to the virtual machine. Physical PC with 4 GB of RAM.
  
  My setup will be help to crushed the Oracle Identity Manager without fault?

  You must be at least 3.5 GB of RAM for IOM. Including SOA, it's going to be 6 to 8 GB. See the links in the configuration system supported here:
  http://www.Oracle.com/technetwork/middleware/IAS/downloads/fusion-certification-100350.html

  Kind regards
  GP