Support for Office 2013 Archive Manager

Similar Questions

• I have XP and office 2010, I can't upgrade for office 2013 should I buy windows 7

  I bought office 2010 and it came with a free office 2013 upgrade when I try to install it tells me that he needs windows 7 or 8. is this correct

  I bought office 2010 and it came with a free office 2013 upgrade when I try to install it tells me that he needs windows 7 or 8. is this correct

  Unfortunately, you need windows 7 or higher to run.

  Here are the system requirements:

  http://Office.Microsoft.com/en-us/support/system-requirements-for-Office-2013-and-Office-365-ProPlus-HA102785958.aspx

• Where to get refund for office 2013

  I'm having this same problem.  I am running Vista.  Why he does not mention this anywhere in the download or the ordering process?  How do I get my money back?  I'm not forking out another couple hundred dollars for updating windows.  It's extremely frustrating!

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/trying-to-install-Microsoft-Office-Professional/5022baba-A104-4d10-A13C-aa6c74f6c044 >

  Assuming you bought Office 2013 less then 45 days via the Windows store, start here: http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Return_Exchange

• Support for office 2010

  11.1.2 SmartView is supported by Office 2010? If not, anyone know when it will be?
  Thank you
  Tim

  Office 2010 is supported by 11.1.1.3.500 and Smart View 9.3.3 and will be supported in the 11.1.2.1 releasing. All dates on 11.1.2.1 would be speculation and are not the official dates.

• CSCul27869 - WebVPN Add support for OWA 2013

  Hi team!

  Some of our customers have reported proplem described in this discussion:

  https://supportforums.Cisco.com/discussion/12220246/ASA-clientless-VPN-a...

  in this discussion, there is an enhancement request said (CSCul27869).

  Is it possible to support this request? Is it possible to get information about the possibility of success for this request?

  Thank you and best regards

  Roman

  Hello Roman,

  Unfortunately, this bug is not resolved yet, on this-->CSCum92080, there should be some parts of the 2013 OWA work.

  I did a quick smart replicatin with 9.3.1 using tunnel and it worked, although I'm not aware of the standards organization supported or other features.

  Please don't forget to rate and score as correct the helpful post!

  David Castro,

  Kind regards

• Support for office 2007

  I have a dell inspiron 1720, maintain the NOTE from the ADMINlabel: maintain the label removed by privacy policy > who I am rebuilding. It came with office 2007 pre-installed. How can I put hand to the media to reinstall office 2007? I tried the Microsoft site to download media, but this only seems to be for commercial office, as versions when I put my product key in, is invalid. Microsoft says that they are not involved with the OEM software versions and I should get in touch with Dell directly. However, Dell is sending me back to Microsoft. How can I get this resolved please?

  Hello

  This is a legal copy of the Office:

  http://officeandoutlook.blogspot.com/2011/05/download-links-for-Microsoft-Office.html

• Support of NOR-DNET for LabVIEW 2013

  We currently use OR DNET 1.6.6 with LabVIEW 2011. I installed LabVIEW 2013 now also on my computer and tried to synchronize all of the drivers with my installation of LabVIEW 2011.

  Well, it seems that NEITHER-DNET does not support LabVIEW 2013, at least officially. compatibility of Version of LabVIEW and NOR-DNET indicates that NEITHER-DNET 1.6.6 supports 2011 NOR-DNET 1.6.7 2012 LabVIEW and LabVIEW.

  The list NOR system driver November 2013 set OR DNET 1.6.7 defined pilot. When I try to install it, there is no support for LabVIEW 2013.

  My question is, if there is a plan to include support OR DNET for LabVIEW 2013 or later in the game to pilot?

  I copied the directories vi.lib\DeviceNet and vi.lib\nidnet of LabVIEW 2011-2013 and I can load my programs without any problems. I always did not build an executable and does not run on the test set-up, but projects can be loaded in LabVIEW 2013 without any screws of brocken. should I expect any problems running LabVIEW 2013 with the NOR-DNET to 1.6.6 and 1.6.7 driver?

  Nick

  There should not be problems but it is a former pilot, we will not be updated for the future version of labview.

• Query Archive for Data Archive Manager

  
  Hello

  Recently I create a query of Peoplesoft (value Type Archive and Public) to use for the data archives Manager. However, after that I saved and closed, when I try to search there again, I couldn't see to change. I know that the query was created because I can see it when I set up the Archive and when trying to create the same query, the system asked me to crush him.

  Is - it so this type of query works? How can I change the SQL code, I just created?

  Appreciate anyone's help.

  Simple search in the default query Manager, Query Type = User, unless you explicitly change the type = search Archive. If you want to search by type and name, place you in the advanced search.

  Kind regards

  Bob

• How to back up and restore Office 2013 product key or registration / activation file

  Warning:  I posted this on Microsoft several 'community support Sites' and if I have yet to have a real Microsoft tech support address the question of the MAN, several 'MVP', but nobody has yet come with an entirely feasible answer, although they tried. One of the guys who posted something (after that I showed him proof that there is such a thing as a Dell OEM version supplied to MS Office Home & Business 2013 - originally, there was no such animal) was that I should "go back to Dell and ask them" so here I am. My original message is copied and pasted below...

  I myself have read almost blind in the last 3 days and several hours now and I still cannot get to a definitive answer so I'll rephrase the question: How can I be save the Home Office & Business 2013 'activation file"(or token) or discover and extract the full product key for it?  After that I upgraded my Windows 8.1 Professional (32-bit) Dell to win 10 Pro I had horrible crash problems. It is obvious that I have to reformat and start from scratch. I managed to get the 10 Pro Windows product key using the latest version of Belarc Advisor but I'm hit a brick wall on my installation of Office Home & Business 2013. Not only is the Dell OEM version but I had to go through Microsoft once to get a new (replacement) product because of a problem earlier, key and since it is the OEM version there is no trace of it on "my account / Office products ' Microsoft page. apparently if you don't buy the commercial version, the product key is not registered there (but it is fully registered and operational, of course). Per this Microsoft article https://support.office.com/en-us/article/Find-your-Office-product-key-after-installation-026bc81b-6b2f-4052-b433-f41e6cc31c5a?CorrelationId=ca7068f2-6a47-4d71-942c-10591d4b00ec&ui=en-US&rs=en-US&ad=US and the Belarc program I can (and subsequently have) found the last 5 characters of the Key but that's not going to do me any good after the re-install unless I have the rest of them. I also tried all the other "key finder" programs suggested in countless other articles and none of them can find the key to the Office Home & Business 2013, or I couldn't do it in hacking / record research.  Simply, I can't believe that Microsoft has not made a provision for backup then restore a specific file "token" with the necessary info in it or extract the necessary key Code so that the Bureau could be reinstalled in the current scenario.  If all goes well a MS employee or some other Expert of the Office can provide concrete information, step by steps on how to do it.  Thanks in advance.

  I sincerely hope that the other guys on the Microsoft Forums sent me in the right direction here; as the pesky Key Code for office 2013 has got to be stored in an accessible location (it is not on any Microsoft server that is accessible by our end users, that's for sure) and there must be some program or methodology around there to recover and decode the thing so it may be reinstated when the program is reinstalled...

  Desktop licenses Dell would have came on a map of MPI:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Office/Microsoft-product-identity-MPI-card/

  http://www.Dell.com/support/article/us/en/19/SLN155139/en

  This is the only place you will get your key. Finders key as Advisor of Berlarc do not give the full product key 25 digits unlike Office 2010 and earlier versions.

  Main finders are useless for Windows 10 family as the free update uses based device activation and key finders will signal a generic product key. See here:

  http://dellwindowsreinstallationguide.com/download-Windows-10-OEM-and-retail-ISO/

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/a-clean-install-of-Windows-10/Windows-10-clean-reinstallation-via-bootable-USB-from-ISO/

• Add-in for Excel 2013

  Y at - it an update to Excel Add-in for Office 2013 cover, or 2007/2010 version works just as well?

  We are about to upgrade to Office 2013 and I want to make sure that we don't disappoint our ALM users!  Thank you.

  Hello

  No problem. Sometimes everyone - don't be ashamed.

  Officially, the latest official version does not yet support Microsoft Office 2013. 2010 and 2007 only are officially supported.

  If it is business critical, I would recommend that you keep Office 2010 running on these machines just to be safe.

  On some computers to test, you can try Office 2013 and see if there is compatibility work and expect the official compatility.

  Please, click on the star of white LAURELS (left). This way you'll testify for advice or help you have received. If your problem has been resolved - click on the appropriate button and accept the solution. ***

• Running Office 2013 on Presario R3000 XP system

  I have Office 2003 on my Presario R3000. I get a download free office 2013 College that I attend. The XP operating system will effectively run Office 2013?

  Dunston.

  Hi, Dunston:

  This link provides the system requirements to run Office 2013.

  It will not even install on XP or Vista by the way.

  http://Office.Microsoft.com/en-us/support/system-requirements-for-Office-2013-and-Office-365-ProPlus-HA102785958.aspx

• Cannot install Office 2013 updates manually or through Windows Update

  I can't install 17 updates for Office 2013, each date of 12/02/2013, through Windows Update or manually.

  I get a "Code 80070643" error message when you try to install these updates through Windows Update. I performed the steps of troubleshooting for Windows Update, including diagnoses FixIt and the fix for the .net framework, I uninstalled and reinstalled Office 365 Home Premium, try a clean boot installation I downloaded two files to install manually, and these attempts also failed. The result of this tells me that it is a problem of Office and is not a problem of Windows Update, but given what I tried, I don't know what to try next.

  Hi Rmiller,

  Thanks for posting your query in Microsoft Community and thank you for the opportunity to help you.

  According to the description, you are faced with problems with .net Framework update and receive error code 80070643.

  I suggest you follow all the steps of the article mentioned below and check:

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates

  http://support.Microsoft.com/kb/958052

   

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• After installing Office 2013 the Adobe PDFMAKER plugin does not appear in one of the Office - Adobe Pro XI applications

  Why don't Adobe PDFMaker Plugin displayed in one of the Office applications after you install Office 365?

  I tried to remove and reinstall the plugin - no change

  Tried to activate the plugin and also checking the value of the load in the registry

  Tried to repair Office and Adobe Pro XI

  I found this solution and looked inside, but the chain for the PDF Plugin do not present in the registry for office 2013

  https://forums.Adobe.com/thread/1555265

  That's what I see:

  [cid:[email protected]]

• Acrobat plug-ins missing from the toolbar for Office 365

  Hello

  Question: Acrobat tab is not visible in MS Word. I am able to convert a doc word to PDF file > export as PDF or save as PDF, but this way I'm losing on the Navigation controls, to keep intact PDF version I have always used the tool since I updated office. On a diff computer. When I use the Acrobat tab to create PDF I get the expected results. I tried the solution now:

  1 reinstalled MS Word

  2 reinstalled Acrobat pro XI

  3. check "Load values" registry to zero and three.

  4 uninstall/reinstall Acrobat plugin

  5. change location to Acrobat add-in, user and specific program profile

  6. has tried to update of office product by using the deferred payment channel configuration file

  7 run as administrator etc.

  I have attached the screenshot showing Acrobat plugin installed and activated, but missing from the toolbar in word. I am using the following Versions:

  MS Word: 16.0.6741.2048

  Acrobat pro XI

  

  Any help would be greatly appreciated!

  Hello

  Please make sure that your Acrobat X 1 is upgraded to the latest version. Support for Office 2016 has been added in 11.0.16 and is not available for older versions of Acrobat X 1.

  Kind regards

  Basma

• Microsoft Office 2013 AppStack

  I am under App 2.7 Volumes and I'm having a problem with Office 2013.  Capture goes very well.  I follow the steps on pages 39 and 40 of app-volumes-27-users - guide.pdf.  The installation of the licenses with KMS... everything looks good.  However, when I have a user, log in and start a desktop app it runs through a setup process.  After that it configures, everything works fine but if the user log out and back in it again anywhere.  Anyone know what I'm doing wrong?

  Yes, there is and I would always updateing models (at least the appstack one) for the creation of new Appstacks.

  Keep in mind that appstacks done with older models is nog updated automatically with a new model.

  You can update the model by going in the appvolumes handler, to go to--> store Configuration, and then click Download the prepackaged Volumes. This downloads the template to all of the directory that is designated as the default directory. The files are on the server administration Appvolumes.

  And normally it should not be necessary to have an accessible volume writable for office 2013. The only thing that makes an accessible volume writable (depending on which model you use) is to keep track of changes made to the system after a user connects to it.

  What you saw that a lot is that Office triggers a "frist boot" configuration that can be circumvented by using the GPO in Windows. This should be the way to go because it is not a problem of Appvolumes for example.

  Also something to keep in mind. Appstacks do not record the user's settings all in package. So all the info in the folder c:\Users\%ussername% will not be in the appstack!