Support for vertex shader need help!

Similar Questions

• Call to a single value to an output channel for A Table need help

  I filled an array that contains all the values in all the channels of my series of data. I am now looking to channel calculations to provide weighted averages and an overall average for the value of the trial. These data will be produced in a new table called 'total table. " This Total table should only have one value per channel.

  The question that I am running is 2 times. When you do the arithmetic channel, mainly channel using "ChnSum" DIAdem amounts does not truncate all data in a new set of data. It retains all values and adds the last block with the sum of all of the channel as a whole. I need or be able to get this last value dynamically (because not all my datasets are the same length) or I need to generate a new string that has only the value of the sum. Is there a way to do this?

  Here is what I try to do but kind of pointless. A screenshot of what looks like the output of the table after treatment of this code is attached.

  "Complete total table with values from calculations above.

  For j = 1 to selectData.MultiSelection.Count

  Counter = counter + 1

  length = ChnPropValGet ("[" & selectData.MultiSelection (j).] ") Index & "] / Cumulative fuel ', 'Length')

  If counter = 2 Then

  [A bunch of calculations of the new output channels channel]

  Call View.Sheets ("total table"). Areas ("field:" & Counter). DisplayObj.Columns.Add (ChnFind ("(" & selectData.MultiSelection (j). ("The index &") > 0 "(, longueur-1))"

  End If

  Next

  Any help would be appreciated.

  Thank you

  ~ Nate

  
  

• G6-1234SA: could not find a wireless Module for G6-1234SA, need help.

  Hi all.

  I'll have a little bit to find the correct Wifi Module map for a G6-1234SA I started recently refurbished.

  I tried a couple that are in my 'parts' box spare, but all seem to come back with error 702, module unsupported.

  I'm really hit a wall with what I can not really find any information on what card I should get.

  I'f anyopne knows a place where I can see details of a G6-1234SA, I can see what part number or a model card I need that would be perfect.

  Kind regards

  Little Martin

  Please go through your laptop SERVICE GUIDE.

  See Chapter 3 shown 18 spare parts catalog for detailed information.

  http://h10032.www1.HP.com/CTG/manual/c02968997

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  Although I am an employee of HP, I speak for myself and not for HP

• I want to know if I can improve the my graphics card for laptop? NEED HELP!

  Compaq Presario CQ42-177TX laptop

  So I have this problem, I tried to update my laptop for games graphics card. But I can hardly find much info related to my model around upgrading graphics cards. I tried to look for some time and yet I still can't find any useful resourses. I need someone to help me on wherther, I can spend my graphics card for my laptop. Thank you.

  fullblack18 wrote:

  Compaq Presario CQ42-177TX laptop

  So I have this problem, I tried to update my laptop for games graphics card. But I can hardly find much info related to my model around upgrading graphics cards. I tried to look for some time and yet I still can't find any useful resourses. I need someone to help me on wherther, I can spend my graphics card for my laptop. Thank you.

  Hello

  Graphics (most of them) in the notebooks are soldered to the motherboard and cannot be upgraded. You will need to replace the whole motherboard and also only use compatible system cards. Check out this guide for maintenance and services:

  http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=4121902&targetPage=http%3A%2F%2Fbizsupport1.austin.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc02627955%2Fc02627955.pdf

• Flash player is not required to use a 32-bit work but any help is for vista, I need help windows 7 as vista doesn't work__

  Please help I need to downgrade to a 32-bit so I can down the daod flash player I followed using vista it says installed but does not work

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Weather for blackBerry Smartphones need help to find the best App

  I need to download the Besst Weather app I want the weather icon to show in good detail the snow, rain, clouds, in GOOD DETAIL nice please good list I would really appreciate it

  BeWeather is the most award-winning weather app and should do the trick for you:

  http://appworld.BlackBerry.com/WebStore/content/1062/?lang=en

  It also comes in a free version:

  http://appworld.BlackBerry.com/WebStore/content/5350/?lang=en

  I use WeatherEye weather network:

  http://appworld.BlackBerry.com/WebStore/content/1191/?lang=en

  I hope I've been helpful to you.

• Enabling technologies semantics support 11 GR 2 need help

  Hello
  I installed the new copy of GR 11, 2 to support oracle for RDF testdrive.
  Read the manual (http://download.oracle.com/docs/cd/E11882_01/appdev.112/e11828/sem_enable.htm#CHDHEABD) all that I have to do is run a script (@$ORACLE_HOME/md/admin/catsem.sql) and everything will be fine. I managed to get this part wrong, so I suspect that I have a partially installed mess... for that I will any new configuration database and start over, however I am not sure on the preconditions, the manual is very vague:
  I should do something special to get space and installed partitioning? When you use dbca that I checked them, so I guess that's all I have to do.
  
  see you soon

  Hello

  You are right. You don't have to do anything special to install space and partitioning. Just make sure that you are using Oracle Database 11 g Enterprise Edition and check the space and partitioning options during installation. Then to install the Semantic Technologies, simply run the catsem.sql script that you mentioned.

  Hope this helps,
  -Matt

• Downgrade HP ENVY 15-j011dx for windows 7, need help finding drivers

  I installed windows 7 on my hp envy 15-j011dx and am a hard time finding all the drivers. Any help would be appreciated.

  Network

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1960103C & REV_0C
  PCI\VEN_10EC & DEV_8168 & SUBSYS_1960103C
  PCI\VEN_10EC & DEV_8168 & CC_020000
  PCI\VEN_10EC & DEV_8168 & CC_0200

  PCI DEVICE

  PCI\VEN_10EC & DEV_5229 & SUBSYS_1960103C & REV_01
  PCI\VEN_10EC & DEV_5229 & SUBSYS_1960103C
  PCI\VEN_10EC & DEV_5229 & CC_FF0000
  PCI\VEN_10EC & DEV_5229 & CC_FF00

  Unknow device

  ACPI\HPQ6007
  * HPQ6007

  Unknow device

  IUSB3\ROOT_HUB30 & VID_8086 & PID_1E31 & REV_0004 & SID_1960103C
  IUSB3\ROOT_HUB30 & VID_8086 & PID_1E31 & REV_0004
  IUSB3\ROOT_HUB30 & VID_8086 & PID_1E31

  THX

  Hello:

  Here are links to the drivers you need:

  PCI\VEN_10EC & DEV_8168:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123192_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  PCI\VEN_10EC & DEV_5229:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125075_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  ACPI\HPQ6007:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&DLC=en&LC=en&OS=4132&product=6532322&sw_lang=

  8086 & PID_1E31:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118604_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Downgrade HP 15-r011dx for windows 7, need help finding drivers

  I installed Windows 7 64 bit on my new laptop HP 15-r011dx and can not find the drivers for the wireless network adapter. Any help would be greatly appreciated! Thank you in advance!

  Most of the Windows 7 drivers for your computer are on the page of drivers PC laptop HP 15-r011dx. This Realtek RTL8188EE 802.11b/g/n Wireless LAN driver should work on your computer. If this driver doesn't work or other devices you are missing, thanks for posting (text only) Windows Device Manager "Hardware ID" for all devices missing or unknown, as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Received a call from someone who claims to come from the support of windows and need help

  Hi, I got a call from a guy who claims to be from the windows support team, I thought at first and then later I realized that it is a scam. So I checked on here to make sure and I discovered that he really was. My problem is that they made me download something so they could control my computer and show me how much I etc when I realized the infections I turned off my computer and uninstalled all of their programs, but they have deleted files. I want to ask that will cause problems in the future? and this meen if I buy something online is possible that they can get information?, if yes, what is the best solution?

  - What to do if you think that you were scammed

  "If you think that you have responded to a scam with personal or financial information phishing, take these steps to minimize the damage.

  • Change the passwords or pins on all your online accounts that you think could be jeopardized.

  • Place an alert on your credit report fraud. Check with your bank or financial advisor if you are unsure how to proceed.

  • Contact the Bank or online merchant directly. Do not follow the link in the fraudulent e-mail message.

  • If you know all the accounts that have been accessed or opened fraudulently, close those accounts.

  • Regularly check your Bank and credit card statements monthly for unexplained charges or inquiries that you initiate. "

  If you want to ensure the security of your system, make sure that you have backed up all personal data you want to preserve all the installation files for the programs or applications that you have installed.
  Then format the computer and reinstall Vista.

  It's the only way you can be sure that there is no hidden malware present on it after allowing access by a stranger.

• APPLICATION NOT SUPPORTED 16-BIT, I NEED HELP PLEASE

  I can play earlier, but after I uninstall the game and reinstall it is what happened. Help me please to get rid of this

  Should I reformat my laptop?

  

  16-bit installers do not work on 64-bit Windows.

  A lot of games that use a 16-bit installation program will work if installed on a machine with Windows 32-bit and copied in

  a machine with 64 bit Windows however.

  Another option is to download a "custom" installation program from a fan site that will run on 64-bit Windows,.

  If it is available.

  -Try the Soldier Front Site forums for more suggestions.  They have an updated version.

  http://soldierfront.aeriagames.com/

  Or - upgrade to version Steam - soldier before 2...

  http://store.steampowered.com/app/239660/

• A Wi - Fi connection will not turn on for g7-1260us-NEED HELP!

  I've owned this phone for about a month and just put in place last week that having a problem with wi-fi(light remains ORANGE).

  I tried to press the wi - fi on the F12 button - key turns on

  I tried to press "fn" + "F12" - won't turn on

  I tried to find an HP Wireless Assistant by SEARCHING - could not find

  I tried to do a "hard reset" (shut down the computer, unplug AC, traction battery, press power for 1 minutes, put the battery and turn on computer)-wi - fi light is still ORANGE.

  HOW CAN I FIX IT?

  I opened the compartment where the wi - fi card is, however, looks like it's easy to break the connection so that I didn't want to not mess with it because it seems that it is plugged in and sitting down, however, if I need to unplug and re - plug again, please let me know how to do this, because I don't want not to break one of the connectors. It also seems that there is a screw holding it in.

  Hello

  Have you looked in the Device Manager to see if the driver for the wireless network adapter is installed and activated?

  You may need to reinstall the driver.

  Given that you have opened before, take a look in the compartment where the wireless module is installed to see what brand and model of wireless network card.

  I mention that, because there are many pilots at the Portal of suport for the web from your laptop in the section to download drivers & software.

  You can find might be easier to reinstall the driver via the Recovery Manager. (from within Windows or by the use of drive series/usb recovery media recovery)

  

  

  

  You can also reinstall the HP connection manager in the Recovery Manager by selecting the reinstallation of the software program and following the same procedure as reinstalling the driver.

• Using Arcserve R16 for backup VMs. need help. Thank you.

  Dear friends,

  I'm almost done migrating my physical servers in an esxi5 environment consist of 3 armies of x exsi, 2 x 10 GB switches and 1 EQL IP SAN.

  I also bought a Dell r.620 with 2008 backup server installed as well as all R16.1 purchased licenses.

  The HARD drive is a pair of 146 GB 15 K SAS based raid one.

  The backup r.620 server has a connection of 10 GB to the SAN and iSCSI.

  I wonder the backup server Arcserve retrieves the direct backup iSCSI connection or through the normal LAN?

  What is the needs of backup server to have a lot of storage space in order to save the images of the VM?

  Finally, does anyone have documentation to share regarding the backup of virtual machines using Arcserve R16?

  Thanks guys...

  The iSCSI config seems good. I would make sure that cards that you use for the iSCSI initiator have all links removed except for TCP/IP v4 properties. Also make sure that the TCP/IP properties are not recording is DNS - basically, you want to just pure TCP/IP connectivity and nothing else.

  If you subscribe to the iSCSI initiator volumes, then I do not think that the CA software will see the volumes more. You'd be in the LAN-based backups that will work also for what it's worth.

• Study for VCP 4 - need help

  Hi all

  I am a student in the VCP 4 exam which I have planned for mid-February. I have the class was updated v5.o under my belt, but duty completed examination VCP 4 before I spend 5 other than class review means nothing to me.

  I'm studying the Configuration Maximums. I did the flash cards for each maximum in the document. As I was going through I'm confused by something. Under the maximum rates of VM, it lists virtual processors per VM, as 8. Then under ESX host Maximums in the CALCULATION it section lists virtual processors per virtual machine as 1. Why is this? I just want to be sure I'm clear. Thanks in advance for your help.

  Kind regards

  Eddie

  egandolfi0611 wrote:

  I have seen that. So, if a virtual machine is enabled France Télécom may not have 1 vCPU?

  fix

• Set up a Document for a billboard - need help

  Hope someone can help me with this.

  I am designing a billboard. I work mainly in Illustrator.

  My problem is that I have some setting wrong my document because of the format and size. I know it's going to be done globally, maybe 01:10, but I can not yet understand how to set up.

  Here are the specs:

  Board size: 14' x 40' (w) (h) - feet

  Size of layout: 7 "(h) x 20" (o) - inches

  Full bleed size: 7.5 "(h) x 20.5" (w) - inches

  Dimensions of security: 6.5 "(h) x 19.5" (w) - inches

  What I do not understand how, take for example the purge height x width, bring up down left right?

  In addition, how to set the size of the security, layout? These translate into also in the plug right left high low?

  Can someone please!

  Available is the size of the Board of Directors art. Subtract the size of the Board of Directors art of the size of the purge and divide by 2 to get the amount of bleeding. (in this case, 1/2 inch on each size)

  The size of security (also sometimes called the Live area) is the part of the billboard that your text should be on the breast.

  Like this