Suspend the edge with game bar animation

Similar Questions

• Satellite Z930 - suspend the problem with connected USB hard drive

  Hello

  Owner of a newly acquired Satellite Z930-15 X, I have a few questions/problems:

  1) suspends the work of RAM and good hibernation when there is no external hard drive connected. If there is one is connected, the laptop immediately returns back to suspend state. Is there a solution for this?

  (2) is there a way to selectively disable Bluetooth? Currently, only toggle airplane mode is available (with Fn + F8 or Windows 8 charm bar). This activates / deactivates the Wi - Fi or Bluetooth I think.

  (3) the portable computer is wobbly on reception. I put a bit of thin paper at the corner of a bottom (bottom left) so that it can be stabilized. Apparently, the problem is also mentioned in another thread. Is there a suggestion to fhix this problem?

  Thank you.

  1 / what HARD drive is connected to your laptop? When I use the external 2.5 HARD drive with my Satellite U940 I n t have problem.

  2 / I ve tested it on my machine and I noticed the same thing. When WIFI is disabled software BT is off too. I didn t find a way how to separately control adapter WLAN and BT.

  3 / I think that this issue needs to be clarified with Toshiba service. They must check and perhaps exchange rubbers inside.

• Scroll the swf with scroll bar

  In a SWF, 1000 can x 1000, you only display 1000 x 500 and scroll the film with a scroll bar?

  If yes how?

  Thank you

  If your .swf is 1000 X 1000 and you only want part of it to be displayed in the browser, you can place the .swf in a div and set the height of the div to 500 pixels and then in css, set the div overflow: scroll

  -What are you looking for?

• Insert the disk with games error

  Im having a problem with call of duty 4 and call of duty: modern warfare, they worked fine on windows xp but im runnig vista pro now and when I try to play solo it always says to insert the right disk and try again. There is only 1 disc for these games please help. I called activision and they said to update my firmware I belive it is up-to-date. If not I don't not how update * address email is removed from the privacy *.

  docdrabs,
  If this PC has been updated from XP to Vista, check if that you update all your hardware and software drivers.  The firmware of your CD player will be available by the manufacturer of the computer or the manufacturer of the real CD player.  I'd start by checking with the manufacturer of PC for updates for most of the material.  You can get your videocard directly updated from the chipset manufacturer (nVidia, ATI, Intel, etc...) Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP 15 laptop: the problem with game performance

  I am computer usin 15-g206ax hp laptop and it has a Quad Core processor and 4 GB of ram and a 2 GB graphics card but its gaming performance isn't right please tell me what I can do to improve game performance

  There's not much to do. You have the graphics card AMD HD 8570 M with video memory dedicated. It's in the middle of the spectrum game is in question. Much better than most computers laptops but much less powerful than a true game machine. Just keep the current drivers is all. Lower Visual effects. There is no possible upgrade for the hardware.

• Symbol of Smartphone Wifi blackBerry on the notification with wifi bar disabled

  Hello

  Since a few days, I have a wifi symbol on my notification with 1 (number) bar on the left of the symbol.

  I have the wifi turned off, but the symbol does not disappear.

  Select the notification bar, I have only the calendar entries, appears nothing else that might be related to wifi.

  Any suggestion on what to check?

  Thanks in advance

  Ciao

  Giorgio

  Sorry,

  I should have read first entry in the forum :-(

  A removal of simple battery and then reinsert it solved the problem.

  Giorgio

• Create the edge with the NSX REST API

  Hello

  I am trying to create a new benefit using the REST API, but I get the following error over and over again: the server has refused the request because the request entity is in a format not supported by the resource for the requested method.

  I use using a xml model provided by the nsx_61_api.pdf and all the "ids" settings are ok. Can anyone tell my what of wrong in my XML?

  I'm able to get a list of the existing edges using GET on https:// < nsxmgr-ip > /api/4.0/edges/

  In this case, I use the same URL, but with the post OFFICE instead. In the body, I put the following XML code.

  < edge >
  <datacenterMoid>datacenter-2</datacenterMoid>
      < name > MyName-Edge-01 < / name >
      < holding > Default < / holding >
  <vseLogLevelemergency</vseLogLevel> >
  <devices>
  <applianceSize>compact</applianceSize>
          < appliance >
  <resourcePoolId>resgroup-5050</resourcePoolId>
  <datastoreId>datastore-104</datastoreId>
          < / appliance >
      < / appliances >
      < vnics >
          < vnic >
              < index > 0 < / index >
              < name > uplink01 < / name >
              < type > uplink < / type >
  <portgroupId>virtualwire-10</portgroupId>
  <addressGroups>
                  < addressGroup >
  <primaryAddress>10.0.0.1</primaryAddress>
  <secondaryAddresses>
                          < ipAddress > 10.0.0.2 < / ipAddress >
                          < ipAddress > 10.0.0.3 < / ipAddress >
  <>of theipAddress10.0.0.4</> of theipAddress
  </secondaryAddresses>
  <subnetPrefixLength>29</subnetPrefixLength>
                  < / addressGroup >
              < / addressGroups >
              < MTU > 1600 < / MTU >
  <enableProxyArp>false</enableProxyArp>
  <enableSendRedirects>true</enableSendRedirects>
  <isConnected>true</isConnected>
  <inShapingPolicy>
  <averageBandwidth>20000000</averageBandwidth>
  <peakBandwidth>20000000</peakBandwidth>
  <burstSize>0</burstSize>
                  < enabled > true < / enabled >
                  < inherited > false < / inherited >
  </inShapingPolicy>
  <outShapingPolicy>
  <averageBandwidth>20000000</averageBandwidth>
  <peakBandwidth>20000000</peakBandwidth>
                  < burstSize > 0 < / burstSize >
                  < enabled > true < / enabled >
                  < inherited > false < / inherited >
  </outShapingPolicy>
          < / vnic >
      < / vnics >
  <cliSettings>
  <>theusernameadmin</> user name
  <password># 123456 PasssworD</> password
  <remoteAccess>true</remoteAccess>
      < / cliSettings >
  < / edge >

  
  

  Thank you very much

  D.
  

  Finally, I discovered.

  You must add the header without papers:

  XML:application / xml

  Don't ask me why this non-standard header is not documented.

  D.

• I can't watch you tube. I get a black box where it should play the video with no bar below for

  Please I don't know how to deal with this, because I'm not at all technical interest. I have Windows Vista Business 32-bit operating system. I can't watch Youtube videos since earlyier today, I just get the full page, but no bar under the video screen is just a black box now. I use Windows internet explore and recently downloaded the latest Adobe Flash Player for Windows Vista. I don't know of any other technical information but depend a lot on Youtube as I am semi confined at home and not watch TV - TV shows just old. Thank you and please help me with this, because I feel lost without Youtube. I have http://WIN 10,2,152,26 Flash Player (think http / is not relevant, it has just appeared)

  Hi, I see that you have found your thread. I'll give you an easy way to find the forum of Flash Player and use it will bring you right to the Forum. Then just click on your thread with your name in the thread you started. Do not use the other. You can bookmark / put it in your Favorites, so you can find

  http://forums.Adobe.com/community/webplayers/flash_player

  Then sign in with your name (gramaqueen) and your password. Now, if you are already connected and on your phone, just minimize the wire instead of close.

  We will stay on this thread. I checked the other thread and maybe it's that you have a problem.

  When you go to this site: http://www.adobe.com/software/flash/about/ as soon as it opens, you should see the animate (spin) logo (F) Red Flash. Then the version of Flash Player you have installed is displayed. It's one thing. While you're still there, RIGHT click the logo Flash, then click settings, then click on display settings. If you see small icons, then click on each of them until you see hardware acceleration with a small box with a check mark in front of it. Click the checkbox if it is deleted. Click Close.

  Let me know on this subject.

  Thank you

  eidnolb

• I up graded to firefox 7 and lost my toolbar. Followed instructions and the lost status bar. Now, the entire page takes up the scree with no bar upstairs or downstairs! Now what?

  Read more top question

  'F11' active / disable Mode full screen

  "Ctr + / ' activates / deactivates modules bar (which was the status bar)

  I can read writes in the title, but your description should contain more information than a title short summarizing.

  • What are the instructions to follow?
  • what you put in, because 7. 0.* is the same as 4.0 in this regard.

  You can make Firefox 7.0.1 look to Firefox 3.6. *, see numbered items 1-10 of the next topic difficulty Firefox 4.0 UI toolbar, problems (make Firefox 4.0 to 8.0, resemble 3.6). If you make changes, you must be aware of what has changed and what it takes to use changed or missing features.

  • http://dmcritchie.MVPs.org/Firefox/Firefox-problems.htm#fx4interface

• On the start with progress bar page, after that it becomes a little more than half, the computer turns off.

  MY MacBook Pro is frozen and I had to turn off get out of the frozen page and when I pressed the button to turn it on it makes the departure noise and then the progress bar lights. When it becomes a little to Midway, the screen goes black and the computer turns off.

  The progress bar that starts from the left end appears when your startup disk is too damaged to mount. The illustrious progress is the functioning of the equivalent of disk utility (ERD). He is never more than half before taking a decision.

  If your drive CAN be mounted, start-up continues normally.

  If your drive cannot be mounted, your Mac stops, because there is nothing productive that it can do.

  If your Mac is trying to start and crashes, which can produce always different results, but that doesn't seem to be the case here.

  I recommend that you start in recovery and run utility disk (ERD) until it comes clean or is hopelessly.

• I rebooted my machine yesterday and now when it comes to the screen with the scroll bar it restarts in loop. Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.

  I restarted my machine yesterday and now when it comes to the screen with scrolling bar (think Night Rider), it restarts in loop.  Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.  Startup Repair is unable to repair.  She argues that the onus of a BadPatch.

  Startup Repair shows the following:

  Problem event name: StartupRepairV2
  Signature of the problem 01: external Media
  Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
  03:6 problem signature
  Signature of the 04:262148 problem
  Signature of the problem 05: BadPatch
  Signature of the 06 problem: BadPatch
  Signature of the problem 07:0
  Signature of issue 08: 1
  Signature of the problem 09: SystemRestore
  Signature of the problem 10:0
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  Hello

  I hope you made redundant data backups as I suspect that the drive has failed. If a PC, you must
  remove all power and remove and reinstall all the cables (at both ends where possible), memory and cards. Do
  not tighten, effectively remove and replace them with care.

  Click here for the manufacturer of your hard drive and launch their diagnosis on your drive.

  By manufacturer diagnostic utilities
  http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html
  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  ----------------------------------------------

  If necessary:

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  No new chances.
  Rob - bicycle - Mark Twain said it is good.

• implementation of the table with the scroll bar. (data scrolling)

  Hello

  I want to show the web service data in the table with scroll bar using java script or html or css .actuall I want only a part of the screen is not whole screen scrollable. can you suggest how it is possible.any suggestion? I used phone gap technology. I used iscroll but it does not work in blackberry data are not displayed in the Simulator... Help, please

  Thank you

  ravi1989 wrote:

  Hello

  I want to show the web service data in the table with scroll bar using java script or html or css .actuall I want only a part of the screen is not whole screen scrollable. can you suggest how it is possible.any suggestion? I used phone gap technology. I used iscroll but it does not work in blackberry data are not displayed in the Simulator... Help, please

  According to devices/operating systems that you want to support, you could give bbUI.js a change. It works really well in most of the cases, and I think there are a lot of things you don't need to worry more because bbUI.js is just for you.

  Look more at the scrollPanel example that does exactly what it takes, a part only of the entire screen of scrolling you can configure a height in the HTML source code directly.

• SharePoint error Message When suspends the workflow

  In a minority of workflows, suspends the workflow with the error message

  It seems to be random when it is applied. Can someone tell me what is happening and how I can avoid this suspension of the workflow for this cause? Thanks for your help.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• CC of the Illustrator's anti-aliasing to white (?) on the edge of the exported TIFF

  Example of how to reproduce the problem is quite simple:
  On project empty to create rectangle in any color (let's make it green).
  Export to TIFF with any anti-aliasing option turned on.
  Exported TIFF gets extreme right and bottom line lighter pixel, because it would be anti-aliasing on the edge with something white.

  How can I get rid of this and make these same two lines at the top and to the left (no lighter color). I need to sample for tile seamless and the only way to be, I found for a moment is 'manual' correction of these two lines in any bitmap image editor.

  Same problem is with JPG and PSD export. Export WMF gets white line at the bottom (not lighter green, but white). Export BMP rectangle gives solid green without lighter lines, because I want it to be.
  As I do a tile seamless for printing on fabrics, I need to format PSD or TIFF with ICC profile. Of course my tile is not as simple as the clear green rectangle, but it's easier to reproduce the problem I found.

  Try another resolution, as a multiple of 72; 288 ppi.

  300 / 72 = 4, 166666666666666666

  Is not a round number, causing anti-aliasing.

• Export interactive PDF in indesign, with the animation of the edge to the SWF file?

  Hello

  I have an interactive pdf in indesign with animation, works very well when they are exported to the swf file.

  I need to use more complex animations that Indesign has, so I created some new features of Adobe Edge animate, exported save them as a file .oam and then put them in the Indesign file.

  If I use the Preview on the animation tab I see indesign animations and the edge, but if I export it to a SWF file is - this only animation to indesign working, and if I export to epub file is only the edge animation work.

  Somehow it is possible to export so that the two works of animation types. and it is possible to do it in a SWF file.

  I have Creative Cloud 2014 for both programs

  Thank you!

  NO.