Sustained change devices after submit?
I just submitted a BB10 app and selected 10 BlackBerry like devices supported, assuming that it would mean also the Dev Alpha... but after reading the post to blog about it once again, I noticed he includes not alpha Dev, I need to compile a completely separate version just to go through the process and check the dev alpha? Seems a bit ridiculous because none of the code has been changed.
You can change this by going to the provider Portal > Products manage > click it below '+' where you add versions (this is a search icon), and then click the version you want to edit > then click on add new version version tab > change accounting and save. It should work I did for a few apps I had not know if it works for QNX although BBOS
Tags: BlackBerry Developers
Similar Questions
-
BlackBerry smartphone how to recover and change device password
I can't access my phone because he refuses my device password. I am now at the last attempt and get the message that any attempt will cause the info on my device to clean.
I tried to recover and change the password of the device through Blackberry Protect without success.
Help! Is - this here anyway to recover my password or reset?
Yes, if you don't have BB Set - up to protect your device with a last backup your contacts data wifi,... etc. Just enter the same credentials on the device after the wipe-out...
-
Help keep the page in the same region after Submit
Version: 4.1.1.00.23
Theme: Classic Blue
Page template: tabs in level one
Hello
I have 6 Classic reports on the page. Some have filters with of LOV in cascade and button to submit the Page after the filters are selected.
The Page reloads the top of the page after sending filters.
I would like to have the page remain on the region where the submission arrived if the user do not scroll to the region that they watch one or work with him.
I found this article: http://http :// www.apexninjas.com/blog/2011/02/stay-in-page-section-after-submit-on-same-apex-page-unconditional-branch-to-same-page-section/ of Apex Ninjas, but the page reload always at the top.
I also tried to put an anchor at the bottom of the Page template tag in the Body section after all the tags:
#LOGO #.
#REGION_POSITION_06 #.#REGION_POSITION_07 #. #NAVIGATION_BAR #.
#REGION_POSITION_08 #.#TAB_CELLS #.#SUCCESS_MESSAGE # NOTIFICATION_MESSAGE # GLOBAL_NOTIFICATION #.#BOX_BODY # REGION_POSITION_02 # REGION_POSITION_04 #. #REGION_POSITION_03 #.#REGION_POSITION_01 ##CUSTOMIZE #I have a branch:
Present immediately after treatment
Target type of URL
URL of: f? p = & APP_ID.:124: & SESSION. : #APPLY_FILTERS_MPL_LT
But the Page still loads up and scrolling is necessary.
Can someone help me get this to work?
Can what information I provide?
Thank you
Joe
Tom,
The 'Skip' and 'submission' comes from the LOV cascading I.
Here are the lists of select Standard. The parent list is called ID wallet and the list of children is called project name. So, if a selected portfolio list project name code displays the project for this portfolio ID name. If no ID portfolio is selected then all the project name are displayed. When checking for Session I knew if a wallet code has been selected, then the default ID, 'All' portfolio, has been selected Session still had the previous ID and therefore the Select project name list was empty.
What I don't understand is that when the default portfolio ID is selected, even if the 'Null' is set to 'Yes', and the default value has been set to 0 (zero), the Session was not updated when the default has been selected.
I changed the query on the Portfolio ID to:
SELECT 'All' d,0 r FROM dual UNION SELECT portfolio_name, portfolio_id FROM portfolio ORDER BY 1
The 'Skip' and 'submission' came from portfolio ID "Action when the changed value of the Page" Configuration. I had it set on 'Redirect and set the value. When I changed it back to "None (default)" and set 'Cascading item (s) Parent LOV' project name to the page item Portfolio ID and then the page started working as expected. No more 'jump' or 'submit '!
Thank you very much for your help and your patience!
Let me know if you have any questions or comments, and if I can close this thread.
Thank you
Joe
-
Application points value becomes zero after submit - Login Page
Hi all
I created 3 application elements, and I put the values of them in a calculation in the login page (Page 101) after Submit.
After the FIRST connection its value becomes zero but then if I logout and reconnect, then it sets the value in the application parts.
Not understand...! Can someone help me please?
FYI - I use Apex v3.2 on FF v5.0 & IE v7.0.
Your help would be appreciated.
Best regards
BlablaHello
Change the type of calculation to the SQL query and
select max(person_name) from rp_persons_tb where UPPER(user_id) = :APP_USER
Kind regards
Jari -
See the second LOV after submit first LOV without ajax
Dear,
How to display a second LOV populated after the sending of the first LOV without using ajax.
Please could someone help me.
THX.
Celio
Published by: Celio on 15-Sep-2009 22:33Hello
Yes, I had the same problem. Make a calculation.
Item name: LOV2
Type: SQL expression
Point calculation: After submit
Computing: NULL VALUEConditions
Condition of type: Request = Expression 1
Expression 1: LOV1This means that when you change the value of the LOV1 and LOV2 returns null.
Mike
-
How can I find places to change color after I visited their?
the question says:
Looking for secure downloads that I have to click on more, then look elsewhere if
There is information that they are safe or not.In Internet Explorer, the link to the site would always change color after I had visited it.
It was great.
But with my newly installed Firefox Version 12 on my XP re-built, is not. This has caused me
wrongly visiting some of the same sites repeatedly. That's the bad news that I find
me starts to download from only to discover I already did and have to go to
uninstall programs (from Control Panel) to cancel it.Is it possible to make this browser tell me what I have already visited sites?
Thank you
TomHave you installed SP3 for Windows XP?
-
iTunes does not recognize my devices after the last update
iTunes does not recognize my devices after the last update. Has crossed all suggestions from the support page (uninstalling/reinstalling driver USB, remove Lockdown folder and so on) but still no joy. iPhone continues to ask if I want to trust to the connected computer, responding 'Yes' has no effect.
Help, please
Thank you
Cyana
Found this solution here:
Re: Does not recognize devices in iTunes on PC
works very well
-
HP Pavilion 17-e102ed: unknown device after installing windows 8.1
ACPI\HPQ6007 unknown device after installation windows8.1 64B
17 - HP Pavilion notebook pc (ENERGY STAR) e102ed
Device ACPI\HPQ6007\3 & 11583659 & 0 has been set up.
Driver name: null
The class GUID: {00000000-0000-0000-0000-000000000000}
Driver date:
Driver version:
Driver provider:
Section of the driver:
Rank of pilot: 0x0
Matching device ID:
Advanced driver:
Update of the device: falseHello:
You need the driver for this device...
This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.
File name: sp71811.exe
-
driver for the unknown PCI device after having reinstalled Windows 8.1
Hello, I have HP ENVY 15-j15ea and 2 problems with it.
1. after reinstalling Windows 8.1 64 bit I can't find the driver for unknown PCI (bus 6), i.e. hardware ID:
device PCI\VEN_10EC & DEV_5229 & SUBSYS_198A103C & REV_01
PCI\VEN_10EC & DEV_5229 & SUBSYS_198A103C
PCI\VEN_10EC & DEV_5229 & CC_FF0000
PCI\VEN_10EC & DEV_5229 & CC_FF00I, ve tried this link, but it does not work: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123976-1&cc=us&dlc=en&lc=en...
2 and what I need to install drivers for my laptop AMD A76M FCH mother/chipset card? I could not find driver for it, then maybe it is pre-installed with Windows 8.1?
Help, please! Thank you!
By the way: why it
You are the very welcome.
If you did not have a SMBus controller device listed in Device Manager in the category other devices, there is no need to install the chipset drivers amd that they would have been included in the database of the W8.1 driver if there is no listed SMBus Controller device after install W8.1.
-
Windows 7 change language after automatic update
Dear Sir/Madam,
I had windows 7 Home premium and using the English language page layout. However, he changes Portuguese after automatic update of windows. This is very disturbing, and it happened twice. I have a reinstall the windows the first time and won't do it again. What can I do other than upgrading to ultimate?
Thank you!
Kind regards
Wil
Take it back to the retailer under your warranty. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Why is my PATH variable change just after I put it in the paths that I want?
I use the set command to change my path variable and verify that it has been defined with the path command. However, soon as the path is defined it somehow be returned automatically to another sequence of paths that I did not specify. My path variable that is changed immediately after I put it?
Hi Chris,
Using the 'SET' command in a command prompt is temporary and exists only while the command line is open and may not affect the programs running outside the command line.
For permanent changes, see this article:
-
I plug in a device after I installed the drivers from the USB says windows can't recognized the device what should I do to solve it.
Hello
I suggest to go to the link below and run the fix tool provided or follow the manual procedure provided to solve the problem.
A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
http://support.Microsoft.com/kb/925196
You can also check the below link for more information about advanced troubleshooting tips for General USB in Windows XP problems.
-
System:
E Machine T5086
Vista Home Premium 32 bit SP2
Intel Pentium 4 3 GHz
2gigs RAM
MOBO: 4006173RIntel (Coryville 2) 945G Motherboard
Wireless card: Hawking HWPG1 device name of PCI card wireless 802.11 g: Ralink RT61 Turbo Wireless LAN CardBackground:
I recently installed a PCI-E ATI Radeon HD4650 gfx 1gig card. Unfortunately, with the fan attached, it's a bit too thick to sit safely far from my wireless card that is located in the upper part of the PCI slot. So, I took and it goes down a slot. (I have only 2 pci slots, a pci-e). The card is recognized, the drivers are installed, it is part of the work, there is no conflict, no exclamation, nothing in Device Manager. However, the internet does not work, and he recorded as "disconnected" or "disabled" in the network and sharing Center. So, when I look for to connect to networks, none never appear. I have other computers in the House. Wireless works fine on all others, showing our fine network. The card worked previously above the slot without any problems and always done if I put it back in there. -I don't understand the pci card is a little old, however, the way it has worked well in the first period, I don't want to buy a new wireless card, only to have it also not work in slot 2. It is very possible, there just a problem with this slot, not sure how determine that. Looking for a Windows hotfix.Also: No. I am not return my gfx card for a 'thin' (which also means diminished gfx capabilities). : P if there is really no viable, I'll get a good wireless USB adapter, however if someone of you recommend.
Troubleshooting based on other threads:
*. Tried to change all the settings in the pci bios. There is nothing to resolve. My particular bios does not have very many parameters to set except the activation or deactivation of devices General.1. I uninstalled the drivers and the software wireless is related (through the Uninstall/Change & Device Manager), then allowed the system to detect and ask to install it again in the same session. (I have a configuration saved in my folder for download from hawking.)
2. uninstalled wireless again. Restarted. Reinstalled.
3 uninstalled. Stop. Out of the wireless card. Starting without a card. (idk why) Stop. Return the card. Started & reinstalled.
4 uninstalled. Starts in Mode safe. Reinstalled.
5 documented IRQ settings. IRQ 22 is used by my wireless card and the "High Definition Audio". So tried combinations of uninstalling/disabling audio through settings manager & bios of the device, uninstalled audio software and then installed the wireless card (Eitherway, both devices specify "no conflict" while two permits.)
6. check my diary of events for apparently relevant errors. Don't know what than a bunch of other things from the East, but is "WARNING: autoconfiguration WLAN Service stopped successfully." So, who researched and tried a few corrections: cmd > netsh > wlan > set autoconfig enabled = yes interface = "wireless network adapter" I get "no such wireless device found." I also tried with "wireless network connection" that I got the same error.
7. in respect of the above, I tried cmd in admin mode > sfc/scannow > came into services to start the wlan. But these instructions fail because it is already started / auto services.
8. Finally uninstalled all my ATI software and released the gfx card. Also uninstalled the wireless. Restarted. Re-installed the wireless.
9 tested back in first Pci wireless. Works. Put back in place in the 2nd, does not work. Gfx card is always out ATM plugged into a cable LAN to have internet at the moment. I was surprised that winupdate found a update for my wireless card, but I have install the driver was the one I used when remembered first install the card waaay back when. Eitherway. Updated. It still does not.
10. I tried through the Hawkings own connection utility: "Utility of zero Configuration." "passage" to zeroconfig fails or seems to do nothing. ZeroConfig also register my card wireless as "disconnected."
About to give up because I'm not sure what I can try. I read on attempt to failover to ACPI standard, but I don't have the windows cd. Other methods to do it without the CD and by Device Manager were futile because the options were there to do. The purpose of the level crossing was to attempt to circumvent the automatic IRQ assignment in case that is the question, I'm going to.
Thanks in advance to anyone who can give an idea. Clues or comments are appreciated just to help me to work along, even if we don't find the right solutions. There are quite a few others "hit my 2nd slot, no internet wireless ' sick out there. Hope that eventually you will help all out.
Hello
It's probably the shared IRQ that creates it.
Get a wireless connection of USB you can connect with a USB extention cable and place it over the system and it should work.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Unknown device after upgrade from windows 7 to windows 8
My laptop is a Pavilion m7 1015dx
I just upgraded to windows 7 to windows 8 and everything went well. Now after installing all the drivers updated for my particular laptop, I have a unknown device in my device manager.
The hardware Id are:
ACPI\VEN_HPQ & DEV_6001
ACPI\HPQ6001
* HPQ6001I don't know what it is or a driver for it.
No matter who else knows it or know what this device and where I can get a driver for it.
Much appreciated!
Hey thought I'd tell someone on the Microsoft Answers site found the driver. It is the wireless button driver.
Here is a link for the driver:
http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58720.exe
Here is a link to the MS Answers:
Thanks for your help.
-
When streaming Pandora on BlackBerry remote stereo gateway, the sound moves from my audio system to the speaker of the device after each song. I can go to manage connections and disconnect and then connect the stereo gateway and it goes back to the sound system.
How can I hear stay continues through the sound system once the gateway is paired?
There is a setting in pandora under options to activate the blue tooth
Maybe you are looking for
-
How can I delete my apple account?
How can I delete my apple account?
-
Satellite L50 - B - 24 c - touchpad does not work
Hello I apologize for my bad English, however, a few months ago, I bought a laptop Toshiba (L50 - B - 24 c) and after a few weeks, the touchpad no longer works. I have before, I had connected a mouse for your comfort for some programs. Now when I dis
-
"To hardcode ini file settings" or "number of automatic review with the turtle."
Hi all We use a SVN repository with Tortoise here in our company for version control. I would like to get the revision number hardcoded in the Application (.exe version). I have already discovered, that there is a tool that can scan a directory and r
-
Cannot install on Vista Home edition OS MS Charts
Installed Microsoft.net framework 3.5 SP1. Tried to install MS and continuousy cards received the fatal error "MS. NET Framework 3 has stopped working". AVG Unistalled and reinstalled the files but still have the same error. Troubled tour and got err
-
Cannot print prints borderless with HP Deskjet 3050 J610 Series
I have a HP Deskjet 3050 J610 Series and cannot understand how printer borderless prints. I downloaded the newest and just reinstalled driver and can't find no option for what "without borders". My printer cannot without borders? Or any type of wo