See the second LOV after submit first LOV without ajax

Similar Questions

• can't see the Dvd rom after the Update window window 10 7

  can't see the DVD rom after the Update window 10 window 7.

  Hi Michael,

  Thanks for posting your query in Microsoft Community.

  We would be happy to help you with the problem you are facing today. I understand the difficulty that is the problem, and I suggest you follow the methods below:

   

  Method 1: Run the troubleshooter of material and check.

  Follow the steps to run the Troubleshooter:

  a. type Troubleshooting in the search bar and click on it.
  b. click hardware and sound.
  c. click on Windows Media Player DVD and follow the instructions.

  Method 2: Uninstall, reinstall the drivers CD/DVD.

  a. press the Windows key + X , and then click Device Manager

  b. expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.
  c. When you are prompted to confirm that you want to remove the device, click OK.
  d. restart the computer.
  e. After you restart the computer, the drivers will be installed automatically.

  Method 3: Download/install the driver CD-ROM/DVD-ROM from the computer manufacturer's support Web site.

  Visit the computer manufacturer's support Web site and install the latest driver CD-ROM/DVD-ROM and check.

  Hope it will be useful. Incase if you still have any other queries please respond with more details and we will be happy to help you.

• Help keep the page in the same region after Submit

  Version: 4.1.1.00.23

  Theme: Classic Blue

  Page template: tabs in level one

  Hello

  I have 6 Classic reports on the page. Some have filters with of LOV in cascade and button to submit the Page after the filters are selected.

  The Page reloads the top of the page after sending filters.

  I would like to have the page remain on the region where the submission arrived if the user do not scroll to the region that they watch one or work with him.

  I found this article: http://http :// www.apexninjas.com/blog/2011/02/stay-in-page-section-after-submit-on-same-apex-page-unconditional-branch-to-same-page-section/ of Apex Ninjas, but the page reload always at the top.

  I also tried to put an anchor at the bottom of the Page template tag in the Body section after all the tags:

  #LOGO #. #REGION_POSITION_06 #.

  #REGION_POSITION_07 #.

  #NAVIGATION_BAR #. #REGION_POSITION_08 #.

  #TAB_CELLS #.
  #SUCCESS_MESSAGE # NOTIFICATION_MESSAGE # GLOBAL_NOTIFICATION #.

  #BOX_BODY # REGION_POSITION_02 # REGION_POSITION_04 #.

  #REGION_POSITION_03 #.

  #REGION_POSITION_01 ##CUSTOMIZE #

  I have a branch:

  Present immediately after treatment

  Target type of URL

  URL of: f? p = & APP_ID.:124: & SESSION. : #APPLY_FILTERS_MPL_LT

  But the Page still loads up and scrolling is necessary.

  Can someone help me get this to work?

  Can what information I provide?

  Thank you

  Joe

  Tom,

  The 'Skip' and 'submission' comes from the LOV cascading I.

  Here are the lists of select Standard. The parent list is called ID wallet and the list of children is called project name. So, if a selected portfolio list project name code displays the project for this portfolio ID name. If no ID portfolio is selected then all the project name are displayed.  When checking for Session I knew if a wallet code has been selected, then the default ID, 'All' portfolio, has been selected Session still had the previous ID and therefore the Select project name list was empty.

  What I don't understand is that when the default portfolio ID is selected, even if the 'Null' is set to 'Yes', and the default value has been set to 0 (zero), the Session was not updated when the default has been selected.

  I changed the query on the Portfolio ID to:

  SELECT 'All' d,0 r
  FROM dual
  UNION
  SELECT portfolio_name, portfolio_id
  FROM   portfolio
  ORDER BY 1
  

  The 'Skip' and 'submission' came from portfolio ID "Action when the changed value of the Page" Configuration. I had it set on 'Redirect and set the value. When I changed it back to "None (default)" and set 'Cascading item (s) Parent LOV' project name to the page item Portfolio ID and then the page started working as expected.  No more 'jump' or 'submit '!

  Thank you very much for your help and your patience!

  Let me know if you have any questions or comments, and if I can close this thread.

  Thank you

  Joe

• I do not see the second HDD on Qosmio G

  Hi all

  Yesterday I did a system recovery, but after that, I do not see my second hard drive. Every time when I started the laptop I have message about this second disk mirroring. When I bought this laptop I had two the two 60 GB hard drive and now system show me only the second local disk C there is no.

  I need to change and where to see them again the two hard drive?

  Hello

  Could you please tell us what phone you have? Thank you

  Now to your question. For me it of clear. The RAID has been configured for mirroring (RAID-1)
  If one of the HARD disk fails, the disk HARD drive can be replaced and its data reconstructed from the other HARD drive which has not failed.

  You can change the RAID settings and disable mirroring in the BIOS.
  But after changing the RAID, you will need to reinstall the entire operating system.

  PS: much useful and tip info you will find in your user manual.

• How to make "Open link in a new tab" back to the second line after "open"?

  I've recently upgraded to FF4.0, but I'm so used to opening new tabs by right-clicking on a link and selecting "Open link in a new tab" instinctively moving a notch and clicking on it in the second selection. New FF4.0 there for the first option. Is there anyway to reposition?

  You can reposition it using the editor from Menu Add-on - https://addons.mozilla.org/firefox/addon/menu-editor/

• Qosmio G30-161: can not see the second HDD in my computer

  Hello
  can someone tell me, that I rebooted reboot DVD in my laptop to restore all of the windows in the normal settings
  as I got when I bought the laptop.
  but for some reason when I go into my computer I do not see the 2nd HDD.

  There is only one disk c it but not the other hard drive. I need to change the settings of smoke to see the 2nd hard drive?

  Hello

  Well, the Qosmio G30-161 should be delivered with two hard drives of 60 GB.
  I guess you can see a single HARD disk due to the RAID settings.
  The unit supports RAID technology.
  I think that the RAID is on the mirror. This means that the data is duplicated on both disks.
  Generally, it should be possible to disable the RAID.
  Check the folder utilities Toshiba.

  PS: It is possible that you will lose data after changing the RAID settings. Be careful.

• Can't see the data partition after restoring the system

  Hello.

  I had installed Windows 7 on my computer and I had two operating systems of windows operating system. And I wanted to boom volume but I couldn't and I downloaded a program and crashed my both operating systems. And after that I used the hp recovery cd use cmd, System Restore. And after that, I got all the workers. But now I can't see my data partition. I can see the computer Manager, but I can't access it.  Please help Microsoft. :(

  Is the partition on the same drive as Vista?  If so I would try to extend the Vista partition to include the space in this partition "missing."  Maybe this process will add space on your system drive, and at least you will have access to it (even if it is not a separate partition that you wish).  I don't know if this will work if the system is not seen as a partition, but I guess it's worth a try.

  After that, my only suggestion is to backup your data and do a clean boot from the drive and format the drive and reset the partitions in the installation process.  This should solve this problem.  I wish I had a less drastic recommendation, but honestly, I know of no other way to solve this problem (if it does not solve the problem).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can NOT see the data store after ESXi update host?

  Hi all

  We use the host ESXi 3.5 on DELL PE 2850 with RAID 5 local storage.  Today, I ran utility update for the host VMware and firmware updated BIOS and RAID on the host computer before a restart of the system.  After the reboot, the system correctly loads the operating system and when I check for storage, the data (with critical VM) store is missing.  Can not see that again.

  Please help me to recover my data with the virtual machines in her store.

  Thank you

  Nadine

  ESXi is installed on the same Partition RAID 5, which is located in the VMFS data store? for example. do you know that the partition is still intact?

  According to what the RAID firmware upgrade has done, it is possible that you may need to set the LVM. EnableResignature option 1 if the score ended with a new UUID.

  -ben

• show sub in the second group header on each page without page break

  Hi all. I need to display each page sub header in the output pdf using rtf. I have two grouping region and category. I used the beginning: body and end: concept to repeat the header of each page. The region is repeated on each page, but I also want the category to repeat on each page without a page break. All of the suggestions. Thanks, Sushil

  Could you added the category value in the header row and the table row properties to repeat on each page... I sent a response to your e-mail. Take a look to see if the output is by expectations.

  Thank you
  Bipuser

• Download on the second computer, after the first download to a single.

  I thought I was getting just Indesign Creative Cloud to use on my little book on a trip. But it's so much nicer than my old version of CS3, I have on my desk, I want to have the cloud on my desktop version now too. I know that I am allowed to have on two computers as long as I only use one at a time (and how could I possibly do anything else?), but is it possible to download on a second computer a week or two after have downloaded you the first? How can I go about it?

  Hi Tui,

  Yes, you can download it from the following link: https://helpx.adobe.com/creative-cloud/help/download-install-app.html

  Kind regards
  Rahul

• First CC won't let me see the Camera Raw after DNG camera blackmagic imported movie file

  as the title says, I imported my DNG files that call blackmagic film first CC 7.2 and the Camera Raw software camera appears to let me do the color correction! but at AE works well

  Please help me! How to solve this problem (and if possible workflow)

  Hi Juk3r,

  There is still no Camera Raw for Premiere Pro importer. You can use other Adobe applications for now. Visit this forum: http://forums.adobe.com/thread/1333692

  Thank you

  Kevin

• HP Pavilion 17 Laptop: Unable to get the second screen after upgrade to Windows 10

  Hello

  I upgraded Windows 8.1 to Windows 10 yesterday.

  Up to now the double screen/second screen was working fine after upgrade my projector not able to identify my laptop.

  When I select the Windows key + P I get the message error "your PC can't project to another screen. Try to reinstall the driver or by selecting the different video card"

  On my device-> graphics cards Manager, I see only Microsoft Basic graphics card.

  Can someone help what driver should I install? Also ask you to provide the link for the driver to download the same.

  Thank you best regards &,.

  Umesh

  Here are the technical details:

  http://WWW8.HP.com/h20195/v2/getpdf.aspx/c04511132.PDF

  It is HD4400 Intel graphics

  Try the Intel driver update utility:

  https://Downloadcenter.Intel.com/download/24345/Intel-driver-update-utility

  Download drivers HP pages not available right now.

• CARS > cannot start the DEV database on the second node after clone of PROD

  2 node RAC
  
  Example 1: DEV11
  Example 2: DEV12
  
  Database version: 10.2.0.5.0
  OS: RHEL 5.5
  
  After clone database, we can only bring to the top of the database on node 1. After the start of the database in the instance DEV11, we cannot raise the database in the instance DEV12. After the start of the database in DEV12, we cannot raise the database pending DEV11.
  
  We receive an error ORA-00600 message.
  
  SQL > startup;
  ORACLE instance started.
  
  Total System Global Area 4429185024 bytes
  Bytes of size 2102032 fixed
  1191185648 variable size bytes
  Buffers data 3221225472 bytes
  Redo buffers 14671872 bytes
  ORA-00600: internal error code, arguments: [kccsbck_first], [2], [1523689643],
  [], [], [], [], []
  
  We went through the following Notes:
  
  ORA-600 [kccsbck_first] - what to check [157536.1 ID]
  
  Bug 2646914 : ORA-600 [KCCSBCK_FIRST], [2] IF ORACM & ORACLE has BEEN RESTARTED ON a NŒUD
  
  DIAGNOSTIC TEST:
  On the failed node, alert.log has a line which reads: "this instance was the first to climb." This is not true. The DB has been mounted on the other node.
  
  Rebound of the proceeding on the other node does not solve our problem.
  
  Ran also, what follows on both nodes, but that didn't help either.
  
  crsctl stop crs
  crsctl start crs
  
  Any advice would be appreciated... Thank you!

  See if the docs from metalink following can help you. Otherwise, please open SR with Oracle.

  1 ORA-600 [kccsbck_first] - what to check [157536.1 ID]
  2 commissioning (editing) of 2nd instance RAC fails with ORA-00600 [kccsbck_first] [395156.1 ID]

  Thank you
  http://swervedba.WordPress.com/

• Can't see the imdb videos after updating to firefox 39.0

  After updating firefox 39, I can't see videos online in some websites like imdb, marca.com, etc. Only works on youtube.
  I disabled Adblock and noscript, but continue the error.

  It's embarrassing, I just restart computer and all start work very well, I didn't remember the last time I have shut down or restart my pc, so it's all...

• The computer hangs after connecting first time. Dell Support Center will not stop running. Windows has blocked some startup programs.

  Last week, I used Ad-Aware, Spybot and malware to scan my computer.  They found several things, but my problems are now: computer falls down after a time of connection the first only.  The center of Support Dell continues to operate for a few minutes, I just cancel now.  "Windows has blocked some startup programs" keeps popping up in the lower left corner.  I uninstalled Spybot but do I have to uninstall the other 2?  During these changes last week, I changed too Trend-Micro (which was nothing capture) to the free version of AVG.  Help, please.  Muzictchr

  Last week, I used Ad-Aware, Spybot and malware to scan my computer.  They found several things, but my problems are now: computer falls down after a time of connection the first only.  The center of Support Dell continues to operate for a few minutes, I just cancel now.  "Windows has blocked some startup programs" keeps popping up in the lower left corner.  I uninstalled Spybot but do I have to uninstall the other 2?  During these changes last week, I changed too Trend-Micro (which was nothing capture) to the free version of AVG.  Help, please.  Muzictchr

  Hey muzictchr

  did you completely remove micro trend in your system

  You can use an installed antivirus or conflicts occur

  Use the tool to uninstall micro trend from the link below to remove all vestiges of what it may be the cause of conflicts with avg

  http://eSupport.trendmicro.com/1/How-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

  Walter, the time zone traveller