Swedish - ToneScript for SPA112

Similar Questions

• Swedish version for Photoshop Elements on Mac?

  Swedish version for Photoshop Elements on Mac?

  Not available, I'm afraid...

  Adobe Photoshop Elements 13 for Mac, Windows - system requirements

• How can I create a full recovery for OS and preinstalled software media?

  Hello
  My son´s accompanying the new Satelite L855-10U preinstalled OS and much other software already installed on the HARD drive, but no installation media, the client is supposed to create a tool from Toshiba.

  I created 6 Swedish recovery for the operating system using the tools Toshiba had installed on the HARD drive.

  To do this 6 Swedish, I created with the Toshiba Recovery tool contain the operating system and all other preinstalled software?

  How can I create the installation media full and usable if not for the operating system and all other preinstalled software?

  I can´t find all the information on the backup software pre-installed with the exception of the BONE. Is there complete information how to do the above, in the manual of the computer, or have you missed this information?

  I would like to know how I can create media backup complete and usable for the operating system as well as for all other preinstalled software, so I can recreate all the facilities of the plant at a new disk if/when the original HARD disk crashes.

  Is there a partition hidden with pre-installed software, and if so, how can I create a backup of this partition, or all the software, so I can reinstall everything if the HARD drive fails, if it is already not with the Swedes 6 Toshiba tool created for me?

  Forward to your response and to complete your customer documentation about the complete instructions for installation and recovery media creation.

  Thank you very much!

  Baltazar

  Hello

  On this forum, you will find a lot of useful comments on the recovery image saved on the HARD drive and its operation to the facility and the creation of recovery disks.
  All this is clearly and simply.

  Front of Toshiba offer new people for laptop in software development create recovery image. This recovery image will be created for each laptop model (specific hardware configuration). Recovery image contains the operating system, all necessary drivers, tools/utilities Toshiba specific and some other software like DVD/Blu-Ray, Microsoft Office test drive and the antivirus application. With this configuration every laptop owner can begin to use the laptop without having to install important applications.

  This package is then saved on the HARD drive and can be used for the installation of HARD drive recovery - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm. In other words, if something is wrong with HARD drive recovery facility you can reset the preinstalled operating system and reinstall recovery imae. After that make you have absolute same settings you had after purchase and first start of the laptop.
  HARD drive recovery image can not be used if:
  -HARD drive is defective
  -you have installed the version of the own BONE
  Structure of the HARD disk partitions - is changed
  Recovery image - HARD drive is deleted or moved to another partition or copied to the external device.

  To avoid all this Toshiba recommends the creation of recovery disks. Using these disks, you will be able to install the OS on the new drive HARD or in any other situation listed above.
  Please note: the use of recovery disks will remove all HARD drive, create the new recovery partition and install image recovery, so you still have the same settings.

  I hope I can help you with my explanation. If you have any other questions you are welcome.

• SPA112 / SPA122 Report rule - Delta / status outputs

  Hello

  I played with the rule of the report and the documentation is not very clear regarding the two report options:-delta and - status

  If I set the rule report [-status]http://myserver/posthandler.php, I see the application to come, but the content of the POST is the real configuration (flat profile) instead of (dish-State) file. This also applies when you use the option - delta

  I use 1.3.1 to test, but I'm not 1.3.2 probably does not work as well.

  Anyone ever been able to generate a delta or get the ATA status.xml file content? I can get the URL (http://my_ata_ip/admin/status.xml), but would be nice to do remote too.

  Thank you

  Benoit

  It is an old and chaotic Guide version. But even here, they mention the status and delta is only supported on the version of the firmware, you do not use (because it is not available for SPA112).

  Well, mark the answer as correct (if we consider that it is correct), please. It will help others to find solutions.

• Windows 7 - Swedish Language Pack

  Background:

  Updated the laptop my wife from XP to Windows 7. Material has a Swedish keyboard and XP has been installed directly from the Swedish. Upgrade, I got a Win 7 Ultimate DVD that was only direct English. I installed the OS DVD, then the Swedish language pack added during the update process. No problem with the upgrade or LP install. Works very well.

  The only problem I have is cosmetic/aesthetic and that bothers me. When you connect the computer displays "Welcome", not "Valkommen" (Swedish). However, when we log on screen displays Swedish - "Xenonas ut" - does not "logout". So I take this to prove that the computer knows it is 'Swedish', but for some reason any displays some items in English. Same English result for "Please wait" and "stop". On reflection, I came to the theory that the three English screens noted the Swedish equivalent contains one of the Swedish characters not in the English alphabet (a, a, o) - specifically a - and the system does not understand how to display these characters and the default values for English. It's strange to me because you can type these characters from the keyboard without problem.

  If this is the case, what and how do I change to get all Swedes during the connection / disconnection? I changed everything in the menu region & language for "Swedish" without result. Really, the only thing that has not been set to Swedish had to do with non-Unicode and changing that has not made a difference. Is it possible to change or are we stuck with Swenglish? As I said, this isn't a major problem for me - just want to know why the inconsistent results and, eventually, how to fix it.

  Bonus question: there is really no need to English on the computer, but it is beacause of the installation DVD. Can I safely remove the English language pack and just leave the Swedish? When I went to explore this option the system provided a warning that English was the language of installation and seemed to suggest removing the English would be a bad idea. Again, this is not a big problem, I just wondered what the official position is on the subject.

  Thank you, DV

  I found my answer on the administrative tab of region/language. When I opened the option 'Copy settings', only the current user has been configured to use the Swedish language pack. The home screen has been updated with American English based on the original installation. Copy the current settings to the user on the Welcome screen solves the problem. Start and stop are now all in Swedish.

  You will not be able to eliminate the English as the base language pack.
  The only thing you can do is uninstall and reinstall Swedish pack and find out what's happening

  How to install and uninstall the display language in Windows 7 Ultimate and Enterprise

  Information

  This will show you how to install and uninstall a Language Pack (LIP) in the Windows 7 ultimate and Windows 7 Enterprise Edition. They can be used to change the display language in Windows 7 uses to display text in wizards, dialog boxes, menus and other elements in the user interface.

  By default, Windows 7 uses the language selected during installation.

  Note

  When you install a module language and change the display language for it, this will automatically Add a keyboard input language for this language on the Language bar.

  OPTION ONE

  Install a Language Pack (LIP)

  1. open the Control Panel (icon view)and click the Windows Update icon.

  (A) proceed to step 3.

  OR

  2. open the Control Panel (icon view)and click the icon of language and the region .

  (A) click the keyboards and languages tab, and then click the install/uninstall languages button. (see screenshot below)

  

  (B) If prompted by UAC, click Yes (if administrator) or enter the administrator password (if standard user).

  (C) If you see this screen, click Next. (see screenshot below)

  

  (D) click on install display languages. (see screenshot below)

  

  (E) click launch Windows Update. (see screenshot below)

  

  3 in Windows Update, click the link view optional updates are available . (see screenshot below)
  NOTE: If you don't see not this link, then click check for updates .

  

  4 select and tick the language packs that you want to install, then click OK. (see screenshot below)

  
  NOTE: If language packs are missing and not hidden, then reset Windows Update history will be also to restore only the language packs by default in Windows 7 Ultimate Edition and Enterprise Edition after you check the updates following after the reset.

  

  5 click the install updates button. (see screenshot below)

  

  6 if prompted by UAC, click Yes (if administrator) or enter the administrator password (if standard user).

  7 when you are finished to download and install, you can close Windows Update. (see screenshot below)

  

  8 you will now be able to use the language in change display language packs.

  SECOND OPTION

  Uninstall a Language Pack (LIP)

  NOTE: You must make sure that you don't have the same display language set to the language pack that you want to uninstall. If it is, then you will need to change the display language in another language first.

  1. open the Control Panel (icon view)and click the icon of language and the region .

  2 click the keyboards and languages tab, and then click the install/uninstall languages button. (see screenshot below)

  

  3 if prompted by UAC, click Yes (if administrator) or enter the administrator password (if standard user).

  4 click Uninstall display languages. (see screenshot below).

  

  5 select and check the language packs that you want to uninstall, and then click Next. (see screenshot below)
  NOTE: You will not be able to uninstall a language pack that is set as your current default display language.

  

  6 when you are done uninstalling, click restart now. (see screenshot below)
  WARNING: It will restart the computer immediately. Don't forget to save and close all open first programs and work.

• photoshop elements manual Swedish 13

  Hello

  My father-in-law Swedish switched to Mac and I bought Photoshop elements 13 and it doesn't have the Swedish language. That does exist for Windows.  His English is not very good so I want to download the Swedish manual for the version of Windows, so it can understand with my help menu items. I have not been able to find any link for him on the Adobe site. Can someone help me? Thank you

  BERT

  bdeivert wrote:

  Thank you Michael, that link is just a few tutorials and not full manual and it's for 14 items, but maybe it's more or less the same thing. It's still a help.  Best regards, BERT

  This is the online help.
  In the same discussion, I also gave a link to the manual in pdf:

  https://helpx.Adobe.com/se/PDF/elements-organizer_reference.PDF

• Menus Swedish wants PS CC 2014 English test on Windows

  I have English Windows 7 Ultimate 64 - bit with Swedish parameters for keyboard date and decimal places (etc.) and downloaded trial PS CC 2014. All I see is English menu options - how can I PS CC 2014 with menus Swedish?

  Bagtjesen I would recommend you continue your assessment in English.

• Swedish Acrobat 6.0 Manual

  As a professional translator, I have to translate a document for a customer from German to Swedish on How to create a self-signed in Acrobat or Acrobat Reader 6.0 and 8.0, and so I need the exact words you see on the screen. I found the Swedish manual for version 8.0 on the web, but not that of 6.0. It is not on the Adobe Web site. Could someone please send me the manual for version 6.0 Swedish . For Acrobat 6.0 Standard (or professional) would be nice ( [email protected] ). TiA! Cordially Margareta
  

  Hello Herbst_XP,

  Unfortunately a Swedish version of the help file Acrobat 6 only was never provided by Adobe.

  -David

• Keyboard replacement ProBook 6450 b

  Hello

  I need the partnumber (Swedish) keyboard for HP ProBook 6450 b.

  Thnx

  Wicke

  Hi Wicke

  Tere are two possible compatible keyboards

  For use only on the computer models equipped with a 14.0 inches poster Assembly and TouchPad pointing device

  For use in Sweden and Finland 613332-B71

  For use only on the computer models equipped with a set of 14.0 inches screen and touchpad

  For use in Sweden and Finland 613384-B71

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c03471180-1.PDF

• I am unable to repair Vista on Satellite L300

  Hi all!

  I have a grilfriend L300 just died the other day.
  The laptop was purchased at a Swedish retailer just a year ago, so the warranty just expired.

  I have no idea why the laptop crashed, but since then there it does not start. Whenever the power is turned on that I find myself in the start menu advanced to give me some choises - repair Vista, start Vista in the normal way, start Vista in SafeMode etc. If I choose normal or safe at this point, the laptop wait about 5-10 seconds and it recharges... To navigate the start menu advanced once more...

  If I select Repair Vista in the start menu, the display shows a normal Windows information pop-up window telling me that the sequence of repair is the collection of information on the computer and take a few minutes. It also displays a nice, work progress bar and a 'abandonment' - button. I rebooted the phone several times here and whenever I find myself here there never a few minutes. In fact, this State is an endless loop! I gave the cell a few minutes or even a few hours without any feedback (oh yes, the abort button works still after 24 hours if the L300 collapsed). So I tried a different approach.

  This time, I tried the F8 key and saw the menu advanced startup options. By following the instructions here on the forum, I pressed 'Repair your computer' and selected a Swedish keyboard. But after pressing the Next button, the L300 entered an infinite loop and did not show the "User name" and "Password" of the whole screen. I gave the L300 24 hours to continue the process, but to no avail. So I stop.

  My question now is how to proceed? I'm leaning towards a broken or non-existent recovery on the HARD disk or a defective HARD disk image. So I would like a test, a bootable CD with a Swedish recovery for the L300 image. Anyone here who can tell me where I can find/buy such a CD?

  Rob

  Hello

  Sounds like a damaged BONE and new installation of the OS is more than recommended.

  > So as a test, I would like to a bootable CD with a Swedish recovery for the L300 image. Anyone here who can tell me where I can find/buy such a CD?

  Of course, I can tell you where you can order a ;) recovery disk
  What about this site:
  https://backupmedia.Toshiba.EU/landing.aspx

  Here you can enter your serial number and usually if something goes smoothly, you should be able to order right recovery media

• Vista problem

  Hello Sir I was using vista sp1 English of my creator of dic toshiba dvd I had burned when I buy last night, I had an error with the blue screen, but he could not endure for a while and just restart... the problem was to start my pc normally. then I put my recovery of dic of dvd creator which is bootable vista when I put it it was change with my tongue before it was English of the first intallation of last night after when I did put my bootable dvd dic then my language changed to Swedish vista, but there is no setting to change my language to English back is possible can I intall my native language I mean English to my system operating vista... with the software how to repair that back or I have image of creator of vista in my pc too who often comes to the screen to burn it, but I've done it before and now everything is in Swedish thanks for help can you help me throgh this problem * address email is removed from the privacy *.

  Hi windows vista l.

  You may need to use the Toshiba Recovery Disc to continue installation or create a new disc using the Toshiba restore disk. To get help, follow the link to the Toshiba support:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Need help to install a printer on E520

  
  

  Hello again

  The Swedish helpdesk for konicaMinolta's response was that there is no driver for the printer. And my question if there wil be any is marked, I have no answer. You know there wasn't for the similar printer with fax.

  If I put the printer in my garage and went and bought another one with similar functions, a brand new 8030Cn Canon color laser and charger for paper entry. After I spent more than 4 hours, excluded 2 hours for buying, trying to get the analysis function printers to work. Canons support told me that the scanner does not work with the printer connected to the network that I had to use the USB port. After many relocations, restarts etc. I called support again once, so I had to wait a while and then they told me that printers scanning does not work with win 7/64...

  So now, I bought another printer without a scanner, a Lexmark C540n that works. I have a separate scanner (a canon Lide 210!) that works.

  In addition to that, I spent many hours on a seagate NAS (Go Flex Home 2 TB) where the software has never found the hard drive...

  The last without any shadow on my ThinkPad, but whence the Christmas vacation go?  :-)

  At least I can enjoy my ThinkPad

  Thanks anyway

  a man with gray hair feel more tired that I use for :-)

  Gunnar Norén in Sweden

• SPA3102, incredibly slow

  I bought this SPA3102 is about one year.

  I'm able to use my ATA, but for performance of bridge... say that it is crap. It turns my connection of 20 Mbps in all more than 6 Mbps!

  So when I bought it, I decided to continue to use my old router and connect the SPA3102 in one of its LAN port for use only to ATA, but no gateway at all.

  Now, I am planning to buy a device with 2 FXS can I install another server VoIP. But whenever I see "Cisco", I feel a little frisky...

  If someone can at least make this SPA3102 as it is supposed to be, maybe I'll change my mind about this company.

  Any help appreciated.

  PS:

  • Wiring is rechecked, all right
  • Firmware is later, I checked 3 weeks before contacting Cisco (who dared not answer).

  Thank you

  No, the notification you received has been linked to your original question, not by a response.

  Yes, the forum is buggy - all notifications by e-mail sent from here are poorly attributed to Cindy. I reported the problem to [email protected] / * / on January 14, 2014 22:27:42 + 0100, but I have had no response yet.

  According to your original question, I can say anything on the SPA3102 as I have no experience with it. But the current two ATA port without router model is SPA112.

  But if I can express my personal opinion... buy the PAP2T, even used or refurbished. Althougth PAP2T EOL, I am convinced more than SPA112. Yes, Cisco is currently working hard to make new SPA112 as stable and reliable as former PAP2T, but it's always just underway. Just my $0,02, of course.

  Beware the PAP2T custom/locked devices - they are locked to the particular VoIP operator. You need 'open' a peripheral. But even for SPA112, SPA3102 and other SPAxxx as well.

• Flash will not play when uploaded to the server

  Hello

  Have a website with 2 small pieces of flash - they play when I click on PLAY in dreamweaver, but will not play when I use an excerpt or when I downloaded the same site. The site is http://www.inzywinzy.ie/

  There should be a spider going up and down a Web next to the Panel and a picture in the picture.

  The code is:

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"

  Inzy Winzy < title > < /title >

  < style type = "text/css" >

  <!--

  {body

  background-color: #FFFFFF;

  text-align: center;

  margin: 0px;

  padding: 0px;

  background-repeat: repeat;

  background-image: url(images/web_backgrounds/web_blue.jpg).

  }

  {#content_index}

  margin-top: 0px;

  padding-top: 0px;

  border: 1px solid #FFFFFF;

  background-repeat: no-repeat;

  height: 600px;

  background-image: url(images/index_background.jpg);

  width: 940px;

  left padding: 8px;

  }

  {#inzy_flash}

  margin-top: 0px;

  padding-top: 0px;

  height: 489px;

  width: 160px;

  float: left;

  }

  {#frame_flash}

  top of the margin: 284px;

  padding-top: 0px;

  height: 204px.

  width: 200px;

  float: right;

  padding-right: 165px;

  margin-bottom: 110px;

  padding-left: 173px;

  }

  : root {overflow - y: scroll ;}

  ->

  < / style >

  < link href = "css/css.css" rel = "stylesheet" type = "text/css" / > "

  < script src = "file:///Macintosh HD/Users/karenmcmorrow/Scripts/AC_RunActiveContent.js" type = "text/javascript" > < / script >

  < script type = "text/javascript" >

  <!--

  function MM_preloadImages() {//v3.0

  var d = document; If (d.images) {if(!d.MM_p) d.MM_p = new Array();

  var i, j is d.MM_p.length, a = MM_preloadImages.arguments; for (i = 0; i <.) Length; i ++)

  If (a [i].indexOf("#")! = 0) {d.MM_p [j] = new Image; d.MM_p [j ++] .src = a [i] ;}}

  }

  function MM_swapImgRestore() //v3.0 {}

  var i, x = offline. MM_sr; for (i = 0; a & & I <.) Length & & (x = a [i]) & & x.oSrc; i ++) x.src = x.oSrc;

  }

  function MM_findObj (n, d) {//v4.01

  var p, i, x;  if(!d) d = document; If ((p = n.IndexOf ("?")) > 0 & & parent.frames.length) {}

  d = parent.frames [n.Substring(p+1)] .document; n = n.Substring (0, p) ;}

  If (!) () x = d [n]) & & copyrights) x = d.all [n]; for (i = 0;! x & & i < d.forms.length; i ++) x = d.forms [i] [n];

  for (i = 0;! x & & d.layers & & I < d.layers.length; i ++) x = MM_findObj (n, d.layers [i] .document);

  If (! x & & d.getElementById) x = d.getElementById (n); Return x;

  }

  function MM_swapImage() {//v3.0

  var i, j = 0, x, a = MM_swapImage.arguments; document. MM_sr = new Array; for (i = 0; i <(a.length-2); I += 3).

  If ((x = MM_findObj (a [i]))! = null) {document. MM_sr [j ++] = x; if(!x.oSrc) x.oSrc = x.src; x.SRC = a [i + 2] ;}

  }

  ->

  < /script >

  < style type = "text/css" >

  <!--

  a {}

  are-family: Georgia, Times New Roman, Times, serif;

  -font size: 15px;

  color: #FFFFFF;

  }

  a: link {}

  text-decoration: none;

  }

  a: visited {}

  text-decoration: none;

  color: #FFFFFF;

  }

  a: hover {}

  text-decoration: none;

  color: #000033;

  }

  a: active {}

  text-decoration: none;

  color: #FFFFFF;

  }

  ->

  < / style >

  < / head >

  < body onload = "MM_preloadImages ('images/panneau/swedish_moccasins_roll.jpg','images/panneau/sh op_roll.jpg','images/signpost/gallery_roll.jpg','images/signpost/about_inzy_roll.jpg','ima ges/signpost/contact_us_roll.jpg')" >

  < name meta = "description" content = "Inzy Winzy Swedish moccasin for babies and children are perfect to keep those tiny feet warm and comfortable." Soles anti-slip and machine washable 100% cotton leather make it easy for parents to deal with too! "/ >

  < name meta = "keywords" content = "baby, babies, kids, shoes, socks, loafers, Sweden, Swedish, cotton, washable clothes, baptism, baby gift." / > "

  < div id = 'wrapper' >

  < div id = "header" > < / div >

  < div id = "content_index" >

  < div id = "signpost" >

  "< div id ="swedish_moccasins"> < a href =" pages/swedish_moccasins.html"onmouseover =" MM_swapImage ("Swedish","' images/signpost/swedish_moccasins_roll.jpg',1)" MM_swapImgRestore "" > < img src="images/signpost/swedish_moccasins.jpg" alt = "Swedish moccasins" name = "Swedish" width = "240" height = "100" border = "0" id = "Swedish" / > < /a > < / div > "

  "< div id = 'shop' > < a href =" pages/shop.html"onmouseover =" MM_swapImage ('boutique', ",'images/signpost/shop_roll.jpg',1)" MM_swapImgRestore "" > < img src="images/signpost/shop.jpg" alt = name of the 'Boutique' = 'Boutique' width = "240" height = "71" border = "0" id = "shop" / > < /a > < / div > "

  "< div id ="photo_gallery"> < a href =" pages/gallery.html"onmouseover =" MM_swapImage ('gallery', ",'images/signpost/gallery_roll.jpg',1)" MM_swapImgRestore "" > < img src="images/signpost/gallery.jpg" alt = "Photo Gallery" name = "Gallery" width = "240" height = "86" border = "0" id = "Gallery" / > < /a > < / div > "

  "< div id ="about_inzy"> < a href =" pages/about_inzy.html"onmouseover =" MM_swapImage ('subject', ",'images/signpost/about_inzy_roll.jpg',1)" MM_swapImgRestore "" > < img src="images/signpost/about_inzy.jpg" alt = "Subject Inzy" name = 'about' width = "240" height = "70" border = "0" id = "about" / > < /a > < / div > "

  "< div id ="contact"> < a href =" pages/contact_us.html"onmouseover =" MM_swapImage ('contact', ",'images/signpost/contact_us_roll.jpg',1)" MM_swapImgRestore "" > < img src="images/signpost/contact_us.jpg" alt = "Contact us" name = "contact" width = "240" height = "142" border = "0" id = "contact" / > < /a > < / div > "

  < / div >

  < div id = "inzy_flash" >

  < script type = "text/javascript" >

  AC_FL_RunContent ('codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9, 0.28, 0', 'wid th', ' 150 ', 'height', '400',' title',' Inzy winzy spider ',' src ',' flash/inzy pluginspage ', ' quality ',' high ', ' ','e http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash movi ',' flash/inzy ',''); End AC code

  < /script > < noscript > < object classid = "clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase =" " http://download.Macromedia.com/pub/Shockwave/cabs/Flash/Swflash.cab#version=9, 0,28,0 "width ="150"height ="400"title ="Inzy winzy spider"> "

  < param name = "movie" value = "flash/inzy.swf" / > "

  < param name = "quality" value = "high" / >

  < embed src = "flash/inzy.swf" quality = "high" pluginspage =" " http://www.Adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"type =" application/x-shockwave-flash"width ="150"height ="400"> < / embed > "

  < / object > < / noscript >

  < / div >

  < div id = "frame_flash" >

  < script type = "text/javascript" >

  AC_FL_RunContent ('codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9, 0.28, 0', 'wid th', '195', 'height', ' 200 "," accesskey"", m ', "tabindex", '20', 'title', "Loafers 'src'", flash / moccasin pluginspage ', ' quality ',' high ', ' ',' http://www.adobe.com/shockwave/download/download .cgi? ") P1_Prod_Version = ShockwaveFlash ',' movie ',' flash/moccasin'); End AC code

  < /script > < noscript > < object classid = "clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase =" " http://download.Macromedia.com/pub/Shockwave/cabs/Flash/Swflash.cab#version=9, 0,28,0 "width ="195"height ="200"accesskey ="m"tabindex ="20"title ="Moccasins"> "

  < param name = "movie" value = "flash/moccasin.swf" / > "

  < param name = "quality" value = "high" / >

  < embed src = "flash/moccasin.swf" quality = "high" pluginspage =" " http://www.Adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"type =" application/x-shockwave-flash"width ="195"height ="200"> < / embed > "

  < / object >

  < / noscript > < / div >

  < / div >

  < div id = "footer" >

  < table width = "950" height = "66" border = "0" >

  < b >

  < td width = "462" height = "29" > < div align = "right" > < span class = "footer" > phone + 353 (0) 87 127 587 </span > < span class = 'footer' > 4 </span > < / div > < table >

  < td width = "50" > < table >

  < td width = '424' class = 'footer' > < div align = "left" > Email < a href = 'mailto:info & #64; inzywinzy.ie' > info & #64; inzywinzy.ie < /a > < / div > < table >

  < /tr >

  < b >

  < td colspan = "3" > < div align = "center" class = "footersmall" > copyright & copy; 2008 Hibernia Designs Ltd t / a Inzy Winzy.   All rights reserved.  Terms and Conditions. < / div > < table >

  < /tr >

  < /table >

  < / div >

  < / div >

  < / body >

  < / html >

  Any help would be appreciated with gratitude!
  Thank you
  Karen

  The first thing is to correct the path to the file: "AC_RunActiveContent.js" is the current path is your hard disk, so you must download the file js AC_Run on the server, medium the easiest is to put it in the same folder as the html code path should then be:

• Download hp photosmart essential. Where to find a safe downloadsite for a Swedish version

  My Hp Photosmart Essential suddenly abandoned - the computer has tried to find a solution, but diddnt.

  I found a site for a Swedish version. But how do I now that it is safe. HP have such a site? My needs are simple.

  Hi @EMCO ,

  I understand that your Photosmart Essential software has stopped working.  You tried to have the research of the computer for a solution without success.

  The Photosmart Essential software usually comes with the installation of the printer.  If you have your installation disc, try reinstalling from there.

  Here is a link to the HP Photosmart Essential software.  You will need to enter your model number and follow the instructions on the screen.

  If it worked before and you have not uninstalled the program, you could do a restore to where he worked.

  I hope this helps.