SPA112 / SPA122 Report rule - Delta / status outputs

Similar Questions

• Protection of the SPA112/SPA122 of the outside traffic

  Some of our resellers (ISPS in most cases) are huge problems with their client of SPA112/SPA122 lock up due to malicious traffic to SIP from the outside. To alleviate these problems, the best solution for us would be the ability to put the whole SPA112/122 VoIP service in one VLAN separated, i.e. the unit all of its 'clean' traffic marked with a personalized label of VLAN and provided regular service (bridge/nat) for not marked WAN traffic. I think some license of Cisco IP phone models.

  Other options, we thought:

  1 change port 5060 to something random source SIP

  2 activate TLS on units

  3. put an ACL in the unit allow SIP of our subnets traffic (not possible with the SPA112/122 to the best of my knowledge?)

  .. .or other good way, minimum of effort and the pain is of course preferable. Allowing TLS would solve the issue? Customers with these problems are those who have connected their SPA directly to the internet, most often used as a router/bridge, the need of the solution to that account, placing the connection of any customer in one vlan voice is not an option.

  Any advice on that? I guess that we are not alone in these matters...

  Based on my best knowledge, the SPA phones has not been designed to be exposed to the public without restriction. They have no back implemented countermeasures and they seems to not be designed to be placed in the network accessible without restriction of global. Read Dangerous default, bill fraud can happen - it's so dangerous to have accessible unit unreliable peer.

  You should put not only the ATA in separate VLANS. ATA special is allowed to speak to the PBX only (and vice versa). Direct communication between two ATA does not. Remember that anyone can disconnect ATA, connect the computer instead of him and attack no matter what ATA in the VLAN so.

  Of course, it is not the solution for the distance units.

  According to the options you mentioned...

  [1] will help a lot if the unit is accessible worldwide, but even with it, this unit is in danger of back and/or unauthorized access

  [2] ATA CPU not so powerful and TLS configuration is causing significant delays with call originating and answering. We have unacceptable to our users, but try it for yourself.

  [3] ATA has no ACLs. The unit is designed to be placed in the secure network

  I guess we're not the only ones with these issues...

  I suspect that our approach will not help you much...

  We arrange closed VPN between the user's network and dedicated to the<->Unit switch switch communication. Non - VPN packets are not allowed to join in everything and only switch unit and the switch packets are allowed to pass through the tunnel. We monitor the connection, we are responsible for the configuration and security unit of the ATA. User is not authorized to access its configuration at all.

  But our users are sensitive to security and reliability.

  I imagine a device connected to a network with security and uncertain reliability. But in this case, we cannot take any responsibility for the parameters out of our control. It is the responsibility of the customer to configure its network to be sure or take the risks associated with the device connected to the unsecured network...

• automatic scheduling of the report and send the output to the user by e-mail

  Hello
  Please I need scheduled report and send the output by email in discoverer. Please can someone help how to achieve this?

  Hello

  Yes, do you that.

  Please see Metalink Note 373812.1 how the schedule of reports to run at a given time while automatically the output electronics

  Thank you
  Fati

• Why Techtool and disk utility reports different SMART status?

  my laptop sometimes starts the sign of prohibition, and some start successfully.

  I guess it's the HARD drive, that this assumption holds up to what otherwise. All the Apple hardware test has passed including the extended version.

  the image below illustrates the tool of technology S.M.A.R.T status report is a failure because of "current pending sector count", while the State SMART Disk utility report is checked.

  who should I believe? or should I suspect the flex cable?

  

  

  Hi chemotkbiloIn, first of all save all your data now. I would tend to believe TT. But you don't have to guess, the best way to find out would be to bring your Mac to any Apple store for a free evaluation.

• Get Queue Status output / empty the queue

  Hey everybody,

  I am trying to create the program that will record all the data in a queue after a number / deadline is met.

  However, when you try to save the output of the Flush queue / status of the queue, I'm not sure how to proceed. My original entry is a group of 4 elements.

  The output shows that it is "an array of clusters of 4 elements..."

  My initial approach was to: change of the table to a group (of 8 items)-> separate each element in another group 4 elements-> merge each specific item to get a unique flow of each of the 4 original elements.

  Result: 1 table-> 1 cluster-> 8 clusters-> 4 data streams, each stream of data representing one of my pieces of original entry (my goal).

  However, this seems to be a long process and I can't help but feel that I'm on in a much simpler way to do.

  I would now like to know if it's the only way I can save each of the indivudual 4 elements in the original 'picture of clusters of 4 elements' produced from the Flush queue / status of the queue?

  Also, is there a way to save/log ALL the data directly from the Flush queue / get an output of status of the queue (jump cutting/splitting of process data)?

  Thank you!

  What you really want to do, is use Dequeue item inside a FOR loop.  Inside the loop, ungroup you your cluster and the output values of the wire.  Let the loop FOR the autoindexing and you will have a different picture for each item in your cluster.

  See the example I did here: http://forums.ni.com/t5/LabVIEW/TDMS-File-starts-recording-data-at-20Hz-but-after-a-short-time/m-p/3...

• Report snapshot. ssmail.txt output

  Hey everyone, trying to make a report snapshot and some return values in a .txt document so I can send by e-mail. I would like to return the virtual machine creation date and the creator's username.

  Everything works fine, except my ssmail.txt output. He wants only to return the user name of the last person who created a snapshot, even if its on a different virtual computer.

  $myVMs = get - VM

  $VMsWithSnaps = @)

  {foreach ($vm to $myVMs)

  $vmView = $vm | Get-View

  If ($vmView.snapshot - not $null) {}

  Write-Host "VM $vm has a snapshot.

  $SnapshotEvents = get-VIEvent-body $vm - type info - MaxSamples 1000 | Where {}

  $_. FullFormattedMessage.contains ("Create virtual machine snapshot")}

  try {}

  $user = $SnapshotEvents [0]. Username

  $time = $SnapshotEvents [0]. Createduserid

  } catch {} [System.Exception]

  $user = $SnapshotEvents.UserName

  $time = $SnapshotEvents.CreatedTime

  }

  $VMInfo = "" | Select 'VM', 'CreationDate', 'user '.

  $VMInfo. "" VM "= $vm. Name

  $VMInfo. "' CreationDate ' = $time

  $VMInfo. "" User "= $user

  $VMsWithSnaps += $VMInfo

  Get - VM | Select-Object - ExpandProperty name | Out-file "C:\scripts\VMList.txt."

  Get-Snapshot - VM (Get-Content C:\scripts\VMList.txt). Select-Object VM, name, creation, $user | Format-List | Out-file C:\scripts\ssmail.txt

  }

  }

  $VMsWithSnaps | CreationDate sorting

  *****************************************************

  It's out of ssmail.txt:

  VM: Lab - vCO VM

  Name: test

  Created on: 07/08/2014-14:01:38

  Adam:

  VM: Lab - vCO VM

  Name: test1

  Created on: 11/08/2014-13:18:39

  Adam:

  VM: Lab - vCO VM

  Name: test2

  Created on: 12/08/2014-09:38:36

  Adam:

  VM: Test VM

  Name: test

  Created: 13/08/2014-09:49:42

  Adam:

  ********************************************************

  It seems that the last person to create a snapshot will have their user name filled with each snapshot release. For example: he says 'Adam' created all snapshots, but "John" had created the first 3 and 'Adam' the last of them.

  Thank you.

  I don't understand why you have the Get - VM and Get-snapshot at the end of the script.

  Try like this (I've simplified a little other things as well)

  $myVMs = get - VM

  {foreach ($vm to $myVMs)

  Get-Snapshot - $vm VM | Tri-objet-property CreationDate-descending | Select - 1 first | %{

  Write-Host "VM $vm has a snapshot.

  $SnapshotEvents = @(get-VIEvent-entité $vm-tapez info-MaxSamples ([int]:: MaxValue) |)

  Where {$_.} FullFormattedMessage.contains ("Create virtual machine snapshot")})

  $_ | Select-Object VM,Name,@{N="Created; E = {$SnapshotEvents [0].} CreatedTime}},@{N="User '; E = {$SnapshotEvents [0].} User name}} |

  Format-List | Out-file C:\ssmail.txt-ajouter

  }

  }

• All accounts payable reports with ERROR status

  Dear members,
  
  I use Oracle R12.1.3 Vision Instance.
  
  When I run some reports in Payables they perform with the error. The details of these reports are the following:-
  
  1 / Bill on Hold report
  Report 2 / period Exceptions closely (XML)
  
  Error message for the Bill to hold report is:-
  
  APP-FND-00362: Routine afpbep cannot run the APPLICATION asks for program & PROGRAM, because the BASEPATH & environment variable is not defined for the application to which belongs the competing executable & EXECUTABLE program.
  
  Stop concurrent managers. Set the basepath for the application environment variable. Restart concurrent managers. (VARIABLE =)
  Systematic AFPEOT cannot build the name of an executable file for your concurrent request 5849462.
  
  Check that the file name components are correct and valid on your system. Check that the environment for the person who started the concurrent Manager
  
  Error message about the exception report close period
  
  OPE data engine Version No.: 5.6.3
  Resp: 50554
  Org ID: 204
  Request ID: 5849465
  All parameters: G_LEDGER_ID = 1:G_START_DATE =: G_END_DATE =: = G_PERIOD_NAME: G_ACTION = PERIOD_CLOSE_EXCP_REPORT:G_DEBUG = Y
  Data model code: APXPCER_XMLP
  Data model Application Short Name: SQLAP
  Indicator of debug: N
  {G_START_DATE =, G_END_DATE =, G_PERIOD_NAME =, G_ACTION = PERIOD_CLOSE_EXCP_REPORT, G_LEDGER_ID = 1, G_DEBUG = Y}
  Calls the engine data OPE...
  oracle.apps.xdo.XDOException:! Error: trigger "beforeReportTrigger" returns the status as 'false '.
  at oracle.apps.xdo.dataengine.XMLPGEN.executeTriggers(XMLPGEN.java:654)
  at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:263)
  at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:215)
  at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:254)
  at oracle.apps.xdo.dataengine.DataProcessor.processDataStructre(DataProcessor.java:390)
  at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.java:355)
  at oracle.apps.xdo.oa.util.DataTemplate.processData(DataTemplate.java:334)
  at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:294)
  at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
  
  ---------------------------------------------------------------------------
  Beginning of the FND_FILE log messages
  ---------------------------------------------------------------------------
  Start process_period: class timestamp:30 - JAN-13 11.23.54.085159000 AM AUSTRALI
  A/WEST
  Start process_period. Current timestamp is = 30 January 13 11.23.54.087489000 AM at THE
  STRALIA/WEST
  Parameters: p_ledger_id = 1; p_org_id =; p_period_name =; p_period_start_date =; dll_remove
  eriod_end_date =; p_sweep_to_period =; p_action = PERIOD_CLOSE_EXCP_REPORT
  Global variables initialized
  cursor c_ledger_attribs: g_ledger_name = Vision operations (USA); g_cash_basis_fla
  g = N
  validate_parameters: flag = EE; message = AP_PERIOD_OR_DATE_REQ
  End process_period: class timestamp:30 - JAN-13 11.23.54.089161000 AM AUSTRALIA.
  WEST
  before_report_apxpcer: flag = EE; message = AP_PERIOD_OR_DATE_REQ
  
  Can someone help me please to solve these problems?
  
  Thanks in advance.
  
  Concerning

  See the documentation below, they are ideal match for the problem at hand...

  When you run the "Bill on Hold report" (shortname APXINROH), an APP-FND-00362-error [1127863.1 ID]
  R12: APXPCER_XMLP - Exceptions near period report (XML) display error ' trigger 'beforeReportTrigger' returns "false" status [1100964.1 ID] "

  Kind regards
  Ivruksha

• Business in Essbase report rule-variable

  Hello
  
  I need to create a report where I use the variable (created as a variable of business rules p. ex.-[BudYear], [CurrVersion], etc.) but it does not work. If I use [BudYear] it is simply display the dimension name in the report as "year". But when I use any variable substitution of exxbase (e.g. - & CurYear etc.) it works fine. Thus, it may be possible to use the variable of business rules in the essbase reports?
  
  Is it possible to save the report essbase in comma-delimited format (I get only option delimited by tabs). Please go back.
  
  
  Thank you and best regards.

  You can load a file delimited by tabs in Oracle via SQLLDR control file that you would use

  "FIELDS TERMINATED BY ' 09 X."

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• need a report on the status of delivery and response for the beneficiaries of the capaign

  Hi, I need to make a report on the State status of response to the beneficiaries of the capaign and discount but cannot find them in the area of subject campaign or the subject of the campaign, any idea response area?
  Thank you

  Just the history of campaign response is the report you're looking for. The fields that you may find useful are.

  The response status - this shows the message open, click, disengagement etc.
  State of delivery - Hard bounce, soft bounce etc.

  To get more details on the above results add the following.

  Type of answer-, this will show the URL TO which the user has clicked a click where you have several followed links in an e-mail. It will also show the reason for hard bounces. This is important because not all hard bounces will trigger the 'Never Email' flag to check. This happens for emails with the statutes of rebound in wrong address.
  Just moved address or unknown address.

• How to generate the report on rules

  How to generate the report on rules with id recipient and with a few keyoword in a rule.

  The rule management dashboard has an integrated 'report rules', you can configure properties and input parameters.

  For rule management dashboard, click homes > Administration > rules. In the upper right, next to the date and time, click reports.

  You can also find these helpful videos: http://edocs.quest.com/foglight/5610/Foglight_Reports_videos.php

  Hope this helps,

  Shay

• Disable the safety rules in the Scout report

  I have a report of Discoverer on GL with the security rules, it displays data based on the responsibility thro which we connected. Users do not want this feature, they want all the data to display in a single responsibility, which means that the security is disabled for this report rule. The report is not all custom folders and also I could not find anywhere the GL_SECURITY_PKG called to implement security rules. Can someone help me to disable the security rules.

  I checked in sql Inspector and all points of view appear to be GLFG_ %. But in the business district, the records are all based on the tables as 'GL_JE_LINES', etc.. Was curious how the underlying sql is using view % GLFG?

  It is not possible that the records are based on tables while in the sql code, you see the view,
  Not looking at the same issues that the report is to help or you don't watch it properly.

  Also your comment "if it's a specific request, they have so you can create a view and use the GL tables to avoid the use of the security GL rule.". You mean I have create a new folder with the same query that is displayed in the Inspector of sql by replacing views % GLFG by the actual table names?

  I mean you want to create a custom (or view) folder by using tables rather then views, I'm not sure that it will be simple to recreate the same query.

  Tamir

• Run two reports, but generate output

  I have developed two reports, one is a detail (portrait style) and another is a synthesis report (landscape). Now, I need to provide an option that will run reports but display the output in a single document (the document must contain the details and analytical content).
  
  Ideal scenario would be to call the report one after the other, but the output in a capture file, but I don't know if it is possible in the reports.
  
  Any help is appreciated. Thanks in advance.
  
  Sundar

  go to the Navigator object, expand the model layout, you would see the three Sections, header, hand and trailer. Use two of them to your needs.

• Oracle reports XML-&gt; model RTF in XML Publisher output

  Hello
  
  Is it possible to run the output of a report from Oracle (formerly, made with the report writer) reports through the postprocessor output for get templated RTF PDF?
  
  The report is already out well-formed XML and I can use the Plugin of Word XML Publisher to turn it into a PDF file. However, I want to 'Set', 'concurrent demand' such as the XML is automatically transformed into a PDF file.
  
  I guess it would be an another "executable" as XDODTEXE who do that?
  
  -Johan

  Hi Johan

  Check out the following

  http://www.Oracle.com/technology/products/XML-Publisher/docs/XMLEBSRep.PDF

  Departure from the last demo (white image) here

  http://www.Oracle.com/technology/products/XML-Publisher/demoshelf/shelf.html

  Tim

• Report on the configured alarms

  Hi all

  I am hunting for an easy way to export all the alarms and when they stock list stocks as well.

  Does anyone have a script close to?

  Really a combination of get-alarmdefinition and get-alarmaction I guess.  My powercli skills are a little weak so looking for some advice!

  The desired output is really a report indicating the status of the alarms in vcenter environment and detect configuration errors.

  Thank you all

  You can do something like this

  Get-AlarmDefinition |Select Name,Entity,Enabled,   @{N="Action";E={[string]::Join(',',(Get-AlarmAction $_ | Select -ExpandProperty ActionType))}}
  

  Note that this can be extended, depending on what you want to see in the report.

• Report a problem history not updated.

  Hello

  I'm having some trouble with my report a history of problem. It has not been updated since 06/05/2016. I see neither free apps downloaded or bought apps and in-app purchases.

  Contact Apple or they have a few problems and I have to just wait it out?

  Best regards

  Michael

  It is not problems reported on their status page (although this does not necessarily mean that there is not one): https://www.apple.com/support/systemstatus/

  You can wait to see if a site problem report updates, or if you have a problem with a purchase you can try to contact Support via: https://www.apple.com/emea/support/itunes/contact.html