SWF cannot access resources local file "Data.xml"
Need help: I built an application allows the user to move one chart to another using a local XML, which I call hollow a HTTPService.I already found on the net I need to change a compiler argument:-usenetwork = false, but it still doesn't work and I get an error indicating that the SWF is not approved. If someone knows a solution?
Thanks in advance,
Victor
Nevermind, I'm a fool. This is supposed to be "- use - network = false '.
Tags: Flex
Similar Questions
-
custom palette with tabs to swf Flex cannot access the local file system
OK, with Flash Player 10, we can load and save local files from a flex web application, then why can't I in the bridge, when I load the SWF in a palette with bridge tabs, load and save functions no longer work.
Is it because I'm loading as a ScriptUI called range of flash, instead of a palette of HTML?
I tried the overall Flash Player security in order to allow the authorization of my swf and created a .cfg, but nothing seems to work.
Help, please.
Thank you, Todd
I don't know exactly how your Panel is a failure. I have attached three examples of Flex projects that include the JavaScripts and Flash panels for bridge. These all worked for me in Bridge CS4.
To access the local, I used FileRefrence.save () for these tests - note that this method is file system was added in Flash Player 10, and so this will not work in Bridge CS3, which uses the Flash Player 9 when you use a widget Flash Player in ScriptUI. In addition, to compile the example I had to modify the Flex builder projects require Flash Player 10 by changing the settings on the page 'Flex compiler' project in Flex Builder settings.
If you use another method to access the system files that works with Flash Player 9, please let me know what it is and I can test it.
Among sovereign wealth funds also gain access to the network. To activate SWF access to the network, I had to add a file of global security settings. Information on creating these files are available here:
http://www.Adobe.com/devnet/flashplayer/articles/flash_player_10_security.PDF
But, for example, on my mac, I put all these projects in a "BridgeFlashPanels" folder on my desktop. Next, I created the BridgeFlashPanels.cfg file in/Library/Application Support / Macromedia / FlashPlayerTrust. The .cfg file had a line: the path to the folder on my desktop.
A description of the panels:
PanelWithNetworkAccess - this Panel has a 'Test' button, when clicked, loads http://www.adobe.com and place it in the text box (note, it will be just the raw HTML, does not make the page).
PanelWithFileSystemAccess - for Flash Player 10 only, this Panel has a Test button and a text field. When you click the Test button, it writes the contents of the text box in the BridgeTest.txt file, unless you choose another file.
PanelWithNetworkAndFileSystemAccess - for Flash Player 10 only, this Panel has a text field and two buttons: "Load Test" and "Test to save." The load test loads http://www.adobe.com in the text field and save him testing saves the content of the text field to BridgeTest.txt.
To try signs, navigate the bin-debug for each project files with Bridge, the .swfs and .jsx files are there. Double-click the thumbnail for the .jsx and bridge must run the script and add the sign indicating the SWF file.
-David
-
I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer. The computers are connected by a switch, fixed IP addresses that are correctly configured and point to a DNS server outside the network. When I try to open the icon for one of the computers, he asked for credentials. I try to type the user name for the computer that is sharing the resource and the password. It is the user account whose computer is loged on and belongs to the Administrators group. for example: user name (Computer1\username) password (password). It does not work. The Windows Firewall is disabled on all computers. It worked well there 2 days. I can't find anything wrong with the network settings. Does anyone have a solution? Thank you.
If the portion of the machine has activated - Simple file sharing (i.e. it is XP Home or it is XP Pro with Simple (default) file sharing) - while all file sharing connections authenticate as user 'guest '. It will not matter what username / password you provide, it will attempt to authenticate as 'guest '. If the guest user has received a password or the guest account is not active, you will experience the symptoms you describe.
If the serving machine running XP Pro and Simple file sharing is disabled, then you should be able to connect by specifying the user as computer\user and the password to connect. To turn off Simple file sharing:
"How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
<>http://support.Microsoft.com/kb/307874 >Also:
"Description of the account in Windows XP"
<>http://support.Microsoft.com/kb/300489 >HTH,
JW -
LoadFile() cannot load the local file?
My program works OK in Director, also OK on the web, but can't work on local. It is said after post like Shockwave and HTML file when the Director runs the HTML code automatically, the DCR in HTML file works fail. I am looking for reason, find, this is because one sentence of the program:
Member ("World"). LoadFile ("myModel.W3D", true, true)
In Director, it works. myModel.W3D is 'file:///D:/MyDirectoty/myModel.W3D '. On the Web, that's OK too. At this time, myMode.W3D is actually "" http://www.myWebSite.com/MyProgramDirectory/myModel.W3D ". " But if I open the HTML published, the loadfile() cannot work. Why?
It is because of security reasons, MacroMeadia let loadFile() cannot load the local file or there is a mistake in my program? How can I let my program works locally?
Quote:
Posted by: WrongAgain
It is because of security reasons, MacroMeadia let loadFile() cannot load the local file or there is a mistake in my program? How can I let my program works locally?Bingo-test - this is a safety feature to prevent the shockwave files accessing your file system.
You can disable this security feature by placing your project published in the folder called «DSWMedia» shockwave-Ben
-
Windows cannot access the specific file, you may not be authorized
I get a message (windows cannot access the specific file, that you will not
authorization) it comes to my Bernina software. I've been using this software for 10 years
Hello
Have you tried running the program by right clicking > select run as administrator?
You want to reinstall using the same method of click with the right button on the install.exe or setup.exe > select run as administrator.
See you soon.
-
Help
I have two laptops 7 Home premium to windows. I created a home group. A computer can see and access each other, the other cannot see, but cannot access the other. When I click the icon from the other laptop, I get the error \\pc is not accessible. You might not have permission to use this network resource...
I checked the password, name of House Group, sharing and discovery of parameters already and everything seems to work. The only antivirus on both computers is microsoft security essentials.
What should I do?
Hello
Please contact Microsoft Community. I understand that you have a problem with access to shared files from other computers on homegroup. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.
This problem might have occurred because of these reasons:
- Permission problem.
- Incorrect settings.
Try the steps listed here and see if it helps:
Method 1:
I suggest you to run the troubleshooters of shared folders to automatically find and fix some common problems.a. open the shared folders convenience store by clicking on the picture of the Start button Start button and then click on Panel.
(b) in the search box, type Troubleshootingand then click Troubleshooting.
c. under network and Internet, click on access shared files and folders on other computers.
Method 2:
If the problem persists, I suggest that return you the item and make sure file sharing permissions are set correctly.File sharing essentials
http://Windows.Microsoft.com/en-us/Windows/file-sharing-essentials#1TC=Windows-7Note: try the steps that you have not tried before.
See the article for more information.
Why can't I access my homegroup?
http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-access-my-HomeGroupHope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.
-
Cannot access the local users and groups
Hello everyone, I got this error since April 2010:
Cannot access the computer ComputerName. The error was: invalid syntax.It is not really bad for me, because I used to use the cmd console.
I followed several recommendation to solve this error, but without success. Many colleagues have the same error. About 100 of the 500 have this problem.
Don't tell me to reinstall the PC because it is not possible. I have no spare time to set my PC again and install all required software. And to reinstall the PC isn't sollution.Re-register the dll or other files not work. Not work replace the msc or cpl files. Installation of the admin packs, technical resource kits or installer also not work.
No errors in the application logs, no errors in the system log, no errors in the security logs. GPO is clear. The same mistake in compmgmt.msc, lusrmgr.msc, or when I add the MMC snap-in. So I guess that the error in the XML (MS XML) parser tool or in the msc file.
Do someone have the solution for this?
Yet once the relocation no solution!
Hi Peter,.
In this case, I would say that you post your question in the Microsoft TechNet forums such that there is a problem with more than 100 computers.
-
IPSec VPN: connected to the VPN but cannot access resources
Hello
I configured a VPN IPSec on two ISP with IP SLA configured, there is a redundancy on the VPN so that if address main is it connect to the VPN backup.
QUESTIONS
-Connect to the primary address and I can access resources
-backup address to connect but can not access resources for example servers
I want a way to connect to backup and access on my servers resources. Please help look in the config below
configuration below:
interface GigabitEthernet0/0
LAN description
nameif inside
security-level 100
IP 192.168.202.100 255.255.255.0
!
interface GigabitEthernet0/1
Description CONNECTION_TO_DOPC
nameif outside
security-level 0
IP address 2.2.2.2 255.255.255.248
!
interface GigabitEthernet0/2
Description CONNECTION_TO_COBRANET
nameif backup
security-level 0
IP 3.3.3.3 255.255.255.240
!
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
boot system Disk0: / asa831 - k8.bin
boot system Disk0: / asa707 - k8.bin
passive FTP mode
clock timezone WAT 1
DNS domain-lookup outside
DNS server-group DefaultDNS
Name-Server 4.2.2.2
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network of object obj-200
192.168.200.0 subnet 255.255.255.0
Description LAN_200
network of object obj-202
192.168.202.0 subnet 255.255.255.0
Description LAN_202
network of the NETWORK_OBJ_192.168.30.0_25 object
subnet 192.168.30.0 255.255.255.128
network of the RDP_12 object
Home 192.168.202.12
Web server description
service object RDP
source eq 3389 destination eq 3389 tcp service
network obj012 object
Home 192.168.202.12
the Backup-PAT object network
192.168.202.0 subnet 255.255.255.0
NETWORK LAN UBA description
the DM_INLINE_NETWORK_1 object-group network
object-network 192.168.200.0 255.255.255.0
object-network 192.168.202.0 255.255.255.0
the DM_INLINE_NETWORK_2 object-group network
network-object object obj-200
network-object object obj-202
access-list extended INSIDE_OUT allow ip 192.168.200.0 255.255.255.0 any
access-list extended INSIDE_OUT allow ip 192.168.202.0 255.255.255.0 any
OUTSIDE_IN list extended access permit icmp any any idle state
OUTSIDE_IN list extended access permit tcp any object obj012 eq inactive 3389
gbnltunnel_splitTunnelAcl standard access list allow 192.168.200.0 255.255.255.0
standard access list gbnltunnel_splitTunnelAcl allow 192.168.202.0 255.255.255.0
BACKUP_IN list extended access permit icmp any any idle state
access extensive list ip 196.216.144.0 encrypt_acl allow 255.255.255.192 192.168.202.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
backup of MTU 1500
Backup2 MTU 1500
local pool GBNLVPNPOOL 192.168.30.0 - 192.168.30.100 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any backup
ASDM image disk0: / asdm-645 - 206.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) static static source NETWORK_OBJ_192.168.30.0_25 destination DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_192.168.30.0_25
NAT (inside, outside) static source DM_INLINE_NETWORK_2 DM_INLINE_NETWORK_2 NETWORK_OBJ_192.168.30.0_25 NETWORK_OBJ_192.168.30.0_25 non-proxy-arp-search of route static destination
!
network of object obj-200
NAT dynamic interface (indoor, outdoor)
network of object obj-202
dynamic NAT (all, outside) interface
network obj012 object
NAT (inside, outside) interface static service tcp 3389 3389
the Backup-PAT object network
dynamic NAT interface (inside, backup)
!
NAT source auto after (indoor, outdoor) dynamic one interface
Access-group interface inside INSIDE_OUT
Access-group OUTSIDE_IN in interface outside
Access-group BACKUP_IN in the backup of the interface
Route outside 0.0.0.0 0.0.0.0 2.2.2.2 1 followed by 100
Backup route 0.0.0.0 0.0.0.0 3.3.3.3 254
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
WebVPN
value of the URL-list GBNL-SERVERS
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
AAA authentication http LOCAL console
AAA authentication enable LOCAL console
http server enable 441
http 192.168.200.0 255.255.255.0 inside
http 192.168.202.0 255.255.255.0 inside
http 192.168.2.0 255.255.255.0 inside
http 192.168.30.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outdoors
http 0.0.0.0 0.0.0.0 backup
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
ALS 10 monitor
type echo protocol ipIcmpEcho 31.13.72.1 interface outside
NUM-package of 5
Timeout 3000
frequency 5
Annex monitor SLA 10 life never start-time now
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto IPSec_map 10 corresponds to the address encrypt_acl
card crypto IPSec_map 10 set peer 196.216.144.1
card crypto IPSec_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
inside crypto map inside_map interface
ipsec_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
ipsec_map interface card crypto outside
gbnltunnel card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
backup of crypto gbnltunnel interface card
Crypto ca trustpoint ASDM_TrustPoint0
Terminal registration
name of the object CN = GBNLVPN.greatbrandsng.com, O = GBNL, C = ng
Configure CRL
Crypto ikev1 allow inside
Crypto ikev1 allow outside
Crypto ikev1 enable backup
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
enable client-implementation to date
!
track 10 rtr 100 accessibility
!
Track 100 rtr 10 accessibility
Telnet 192.168.200.0 255.255.255.0 inside
Telnet 192.168.202.0 255.255.255.0 inside
Telnet timeout 5
SSH 192.168.202.0 255.255.255.0 inside
SSH 192.168.200.0 255.255.255.0 inside
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 0.0.0.0 0.0.0.0 backup
SSH timeout 30
SSH group dh-Group1-sha1 key exchange
Console timeout 0
management-access inside
a basic threat threat detection
threat detection statistics
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
WebVPN
allow outside
enable backup
activate backup2
internal gbnltunnel group policy
attributes of the strategy of group gbnltunnel
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
greatbrandsng.com value by default-field
Group Policy 'Group 2' internal
type of remote access service
type tunnel-group gbnltunnel remote access
tunnel-group gbnltunnel General-attributes
address GBNLVPNPOOL pool
Group Policy - by default-gbnltunnel
gbnltunnel group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group GBNLSSL remote access
type tunnel-group GBNL_WEBVPN remote access
attributes global-tunnel-group GBNL_WEBVPN
Group Policy - by default-gbnltunnel
tunnel-group 196.216.144.1 type ipsec-l2l
IPSec-attributes tunnel-group 196.216.144.1
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
HPM topN enable
Cryptochecksum:6004bf457c9c0bc1babbdbf1cd8aeba5
: end
When you say that "the external interface is downwards using failover techniques" you mean this failover occurred because the ASA is no longer able to reach the 31.13.72.1? Not that the actual interface is broken?
If this is the case, then the NATing is your problem. Since you're using the same VPN pool for VPN connections the ASA cannot distinguish between the two streams of traffic if the external interface is still in place. The SLA tracking only removes a route in the routing table, but does not affect what happens in the NAT process.
try to change the NAT statement follows him and the test (don't forget to remove the other statements to exempt of NAT for this traffic during the test):
NAT (inside,any) static static source NETWORK_OBJ_192.168.30.0_25 destination DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_192.168.30.0_25
If this does not work, I would either turn off the external interface when a failover occurs, or create a second connection profile that contains a separate mass of IP for the VPN connection and ask users to connect using this profile when a failover takes place. Don't forget to create Nat exempt instructions for this traffic also.
--
Please note all useful posts
-
BI SampleAppFiles Server cannot access the correct file
Hello experts,
Part of my project is creation of KPIs for my clients. Before doing all this, I'm trying to create a KPI sample and see if it works well. It is using 11g (1.1.7).
Here's the problem: I created the sample KPI without problem; However, when I try to open the report I get an error that
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 64023] Cannot access the E:\BIHOME\instances\instance1\bifoundation\OracleBIServerComponent\coreapplication_obis1/sample/SampleAppFiles/Data/SAMP_REVENUE_A.xml: no such file or directory for table SAMP_REVENUE_A (HY000)
The path is correct, except instead (E:\), it should be (C:\). Does anyone know how to change this? Help, please.
I don't have a 'E' drive in my system. This forum works on windows
Help, please
Hello
In the sample OBIEE, you have a variable called BI_EE_HOME with this path
To change this, open your SPR (online mode) and then change repository variable BI_EE_HOME
We call this variable in your connection pool (you can change this path directly on the connection pool too)
Felipe Idalgo
-
I'm able to access my local files next to the email
Please help me restore my local files. I am no longer able to scroll from side to side to see and use. They are usually next to emails for easy access. I don't know what happened. Help
Try a system restore to a Date before the problem began:
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
See you soon.
Mick Murphy - Microsoft partner
-
I cannot access files W7 Pro both a remote computer (XP Pro) and a virtual machine (XP Pro not XP Mode) on my network. I see the folders but it says that I have no rights. I can access of W7 but not vice versa. In XP mode, I can access the file from W7. What is going on?
Dennis
Hello
For assistance on this issue, you can ask your question in the link below.
Windows 7 IT Pro
http://social.technet.Microsoft.com/forums/en/category/w7itpro
-
Cannot access the help files.
I need another way to read the help files. I have the cause is with my satellite ISP and they seem unable to solve the problem. For example, using Safari displays
"The theme is currently unavailable. Can I access topics help on the web or from another source?
If you have access to these forums, you should be able to access the help files for Apple.
Try it this way...
With Safari open, in the Safari menu bar click help > Safari help
See it to load for you.
I just tried Safari help myself and it works great.
-
ASA 5505 IPSEC VPN connected but cannot access the local network
ASA: 8.2.5
ASDM: 6.4.5
LAN: 10.1.0.0/22
Pool VPN: 172.16.10.0/24
Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.
I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.
Here is my setup, wrong set up anything?
ASA Version 8.2 (5)
!
hostname asatest
domain XXX.com
activate 8Fw1QFqthX2n4uD3 encrypted password
g9NiG6oUPjkYrHNt encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 10.1.1.253 255.255.252.0
!
interface Vlan2
nameif outside
security-level 0
address IP XXX.XXX.XXX.XXX 255.255.255.240
!
passive FTP mode
clock timezone PST - 8
clock summer-time recurring PDT
DNS server-group DefaultDNS
domain vff.com
vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0
access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0
pager lines 24
Enable logging
timestamp of the record
logging trap warnings
asdm of logging of information
logging - the id of the device hostname
host of logging inside the 10.1.1.230
Within 1500 MTU
Outside 1500 MTU
IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server protocol nt AD
AAA-server host 10.1.1.108 AD (inside)
NT-auth-domain controller 10.1.1.108
Enable http server
http 10.1.0.0 255.255.252.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 10.1.0.0 255.255.252.0 inside
SSH timeout 20
Console timeout 0
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal group vpntest strategy
Group vpntest policy attributes
value of 10.1.1.108 WINS server
Server DNS 10.1.1.108 value
Protocol-tunnel-VPN IPSec l2tp ipsec
disable the password-storage
disable the IP-comp
Re-xauth disable
disable the PFS
IPSec-udp disable
IPSec-udp-port 10000
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpntest_splitTunnelAcl
value by default-domain XXX.com
disable the split-tunnel-all dns
Dungeon-client-config backup servers
the address value vpnpool pools
admin WeiepwREwT66BhE9 encrypted privilege 15 password username
username user5 encrypted password privilege 5 yIWniWfceAUz1sUb
the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username
tunnel-group vpntest type remote access
tunnel-group vpntest General attributes
address vpnpool pool
authentication-server-group AD
authentication-server-group (inside) AD
Group Policy - by default-vpntest
band-Kingdom
vpntest group tunnel ipsec-attributes
pre-shared-key BEKey123456
NOCHECK Peer-id-validate
!
!
privilege level 3 mode exec cmd command perfmon
privilege level 3 mode exec cmd ping command
mode privileged exec command cmd level 3
logging of the privilege level 3 mode exec cmd commands
privilege level 3 exec command failover mode cmd
privilege level 3 mode exec command packet cmd - draw
privilege show import at the level 5 exec mode command
privilege level 5 see fashion exec running-config command
order of privilege show level 3 exec mode reload
privilege level 3 exec mode control fashion show
privilege see the level 3 exec firewall command mode
privilege see the level 3 exec mode command ASP.
processor mode privileged exec command to see the level 3
privilege command shell see the level 3 exec mode
privilege show level 3 exec command clock mode
privilege exec mode level 3 dns-hosts command show
privilege see the level 3 exec command access-list mode
logging of orders privilege see the level 3 exec mode
privilege, level 3 see the exec command mode vlan
privilege show level 3 exec command ip mode
privilege, level 3 see fashion exec command ipv6
privilege, level 3 see the exec command failover mode
privilege, level 3 see fashion exec command asdm
exec mode privilege see the level 3 command arp
command routing privilege see the level 3 exec mode
privilege, level 3 see fashion exec command ospf
privilege, level 3 see the exec command in aaa-server mode
AAA mode privileged exec command to see the level 3
privilege, level 3 see fashion exec command eigrp
privilege see the level 3 exec mode command crypto
privilege, level 3 see fashion exec command vpn-sessiondb
privilege level 3 exec mode command ssh show
privilege, level 3 see fashion exec command dhcpd
privilege, level 3 see the vpnclient command exec mode
privilege, level 3 see fashion exec command vpn
privilege level see the 3 blocks from exec mode command
privilege, level 3 see fashion exec command wccp
privilege see the level 3 exec command mode dynamic filters
privilege, level 3 see the exec command in webvpn mode
privilege control module see the level 3 exec mode
privilege, level 3 see fashion exec command uauth
privilege see the level 3 exec command compression mode
level 3 for the show privilege mode configure the command interface
level 3 for the show privilege mode set clock command
level 3 for the show privilege mode configure the access-list command
level 3 for the show privilege mode set up the registration of the order
level 3 for the show privilege mode configure ip command
level 3 for the show privilege mode configure command failover
level 5 mode see the privilege set up command asdm
level 3 for the show privilege mode configure arp command
level 3 for the show privilege mode configure the command routing
level 3 for the show privilege mode configure aaa-order server
level mode 3 privilege see the command configure aaa
level 3 for the show privilege mode configure command crypto
level 3 for the show privilege mode configure ssh command
level 3 for the show privilege mode configure command dhcpd
level 5 mode see the privilege set privilege to command
privilege level clear 3 mode exec command dns host
logging of the privilege clear level 3 exec mode commands
clear level 3 arp command mode privileged exec
AAA-server of privilege clear level 3 exec mode command
privilege clear level 3 exec mode command crypto
privilege clear level 3 exec command mode dynamic filters
level 3 for the privilege cmd mode configure command failover
clear level 3 privilege mode set the logging of command
privilege mode clear level 3 Configure arp command
clear level 3 privilege mode configure command crypto
clear level 3 privilege mode configure aaa-order server
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4
: end
Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.
The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.
On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.
-
Creative cloud Installer cannot access the critical file
I'm on a Macbook Pro / OS x 10.9.5
Installation is blocked to 72% with the error "Installer could not access a critical file. Please try to reinstall (error code 43)
When I click on get help just send me to this page: Learn & Support
Moreover, the keeps installation program invites me to update and there is no way to turn it off. Once the application CC "learned" that it was time to update limits access to menu standards CC app options and you are left abandoned, help, or update. There is no mechanism to stop the CC application notify you several times during the day. Force to leave the app doesn't work that it opens again after some time and reappears in the toolbar. In the future, it would be more user-friendly workflow to allow us to limit notifications and auto app to open even if the application needs to update. Other than that and this error, my CC experience has been great. Thank you.
Just an update - I have reset my mac wide permissions at one point because I had my mac restart in gray screen, and then the installer worked. I don't know if that had nothing to do with this, but im guessing it CAN be because the restricted permissions were part of the Adobe error message.
-
-Distance SWFs cannot access local files.
Security Sandbox Violation
File:///D|/AMIT%20DATA/Personel/STANDS%20PROJECT/productsimages.swf interrupted connection - not allowed to http://www.fltech.in/AWG/app.swf
I'm trying to load productimages.swf from another server to my client, but cannot load that...
You must add a cross-domain permission on your local server file.
Maybe you are looking for
-
Driver and software for DSC - S30 camera
I have a similar problem to ngoc - maybe someone can direct me to a download driver "FREE"? I have a Cybershot DSC - S30. I have a new laptop with the Vista operating system and now it no longer works. I did some research on google for the updated dr
-
Re: Satellite A300-1GN - required XP for a long time to start
Hello I have the Satellite A300-1GN.I reinstalled from Vista to XP Home.After you have installed all the drivers from my system starts more than 4 minutes. I'm on SATA (no AHCI) compatibility mode.You have the same problem? I can't go because I have
-
Abort several parallel loops in FPGA environment
Hi all I developed a LabVIEW FPGA code that performs two parallel loops. The first loop monitors the external positioning sensors and the second loop provides the control for the system under test algorithm. I am trying to incorporate a condition o
-
Hello world! Cannot find pallet assistant Daq. After installation, it has not been revealed. Eventually, there is an additional module or the Toolbox to work with... Thank you for the answers!
-
Why are all the links to the page of MBSA FAQ now realized the MBSA download page, including those in parser. Just trying to find the wsusscn2.cab file so I can run mbsa offline. It was always accessible. Something has changed at Microsoft. What if