Cannot access the local users and groups
Hello everyone, I got this error since April 2010:
Cannot access the computer ComputerName. The error was: invalid syntax.
It is not really bad for me, because I used to use the cmd console.
I followed several recommendation to solve this error, but without success. Many colleagues have the same error. About 100 of the 500 have this problem.
Don't tell me to reinstall the PC because it is not possible. I have no spare time to set my PC again and install all required software. And to reinstall the PC isn't sollution.
Re-register the dll or other files not work. Not work replace the msc or cpl files. Installation of the admin packs, technical resource kits or installer also not work.
No errors in the application logs, no errors in the system log, no errors in the security logs. GPO is clear. The same mistake in compmgmt.msc, lusrmgr.msc, or when I add the MMC snap-in. So I guess that the error in the XML (MS XML) parser tool or in the msc file.
Do someone have the solution for this?
Yet once the relocation no solution!
Hi Peter,.
In this case, I would say that you post your question in the Microsoft TechNet forums such that there is a problem with more than 100 computers.
Tags: Windows
Similar Questions
-
Where the local users and groups in Win 7 Home Premium? I don't find it in computer management.
Elevate your privileges permanently would defy the purpose of UAC and is therefore not available. There are two ways to start a command prompt:
1. click on the start planet.2. type the three letters cmd in the search box.3. press on Ctrl + Shift + Enter4. click on "run as Administrator".or:1. create a shortcut on the desktop for cmd.exe.2. right click.3. click on run as administrator
-
Why isn't the local users and groups in Windows 7 Home Premium active?
Unfortunately, the page of "Compare editions" for Windows 7 does not show that it is disabled for Windows 7 Home Premium. So, I think that Microsoft is engaged in false advertising by activating only not this snap-in Control Panel.
Bottom line is: I need to access the Panel to ensure that I am in the Visual Studio debugger users group. So, I can't debug anything. The software does not work properly.
Microsoft should immediately activate this feature.
I'm sorry, but no original version of Windows has always included local users and groups .
I recommend posting your question in the MSDN Visual Studio Forums , where other developers can answer. They know how to do what you want.
To get your suggestion to the right people at Microsoft, please click the give us your comments. Help improve Windows 7 link under ads at the top of the main page of the forum, or go to the page give us your comments for Windows 7 . Boulder computer Maven
Most Microsoft Valuable Professional -
Suddenly can't access local users and groups permissions list
In computer management (my computer / manage) "Local users and groups" icon has a red x on it and when I click on it I get this message:
Local users and groups
Unable to access the computer {computer name} toa. The error was: library not registered.How can I find which library is not registered, so I can register?
BTW, this is one of several very similar problems that began to arrive after the last update of Microsoft Windows Vista.
Hello GCCarvill,
Thanks for posting your question in the Microsoft answers Forum.
If you have a system restore point, before applying the updates would be the fastest way to restore the library file
who is missing. Use the following article to restore to an earlier point in time. Don't forget to create a manual restore point before using an earlier version of the operating system.936212 KB - how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
http://support.Microsoft.com/kb/936212You can also create a manual system restore point so that you can restore in case of problems.
How to create a system restore point manually:
Right-click on the computer icon in the desktop, then choose Properties
In the left pane, click System Protection
Alternatively, to directly access the System Protection tab, click Start and type SystemPropertiesProtection.exe.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Click the System Protection tab and then click on create.
In the System Protection dialog box, type a description, and then click on create.After the search for the other forums, I found another user having a similar problem. They used a tool called FileMon and after comparison, they discovered a file called activeds.tlb was missing. They have restored a copy in the system32 directory and
was then able to access the local users and groups successfully. You can download a copy of FileMon of:
http://www.sysinternals.comIf please reply back and let us know if it helped to solve your problem or if you need further assistance.
Thank you
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Local users and groups is missing from computer management
I can't find the local users and groups folder in computer management. He is absent.
Hello
Advanced management tools are only available in the Windows 8 Pro version. It seems that you have the standard version of Windows 8. Windows and Windows 8 RT have local users and groups with disabilities.
You can also check the wire and check.
The local users and groups missing
Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.
-
Don't Win 7 Home Premium no local users and groups under computer management
I am trying to create local groups, but when I go into computer Managemmt as an admin there no option groups in the tree. Aide said it is in "computer Management\System Tools\Local and Groups\Groups users", but the only options I have under system tools are planner of the event viewer, shared folders, Performance and device - not local users and groups management tasks. No idea how I can get access to this?
I think that it is only available if you have Windows 7 Professional or ultimate edition. Bob Larson Access MVP
-
Win 7 Pro - all users in local users and groups
Hello I have a new install of Windows 7 Pro with two users; Administrator (built in) and my personal user (CCzahor). I can connect to windows very well with both users. When I right click my computer and manage them, there is no user appearing in "users and groups / users. However, if I go to groups, double-click 'Administrators', I see Director listed, and I see CCzahor under "users". In addition, when I run lusrmgr.msc, I see the same thing as described above, but when I run netplwiz.msc, I see the admin and CCzahor displayed in the list.
It is not functionally a problem, but rather a nuisance than anything else. Any ideas?
Hello
Please provide a detailed description of the issue.
I understand the inconvenience you encountered. I will certainly help you with information.
Note: Users and groups is located in computer management. A collection of administrative tools that you can use to manage a local computer or a remote computer. Please see the link below.
Local users and groups overview
https://TechNet.Microsoft.com/en-us/library/cc770756.aspx?f=255&MSPPError=-2147217396
Important: Under local users and groups, you must click users to see users and groups. And if the two accounts you have in the system have administrator permissions, it's going to be reflective under the administrator group.
I hope this information is useful.
Please provide us with the information above to help you best.
Thank you.
-
ASA 5505 IPSEC VPN connected but cannot access the local network
ASA: 8.2.5
ASDM: 6.4.5
LAN: 10.1.0.0/22
Pool VPN: 172.16.10.0/24
Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.
I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.
Here is my setup, wrong set up anything?
ASA Version 8.2 (5)
!
hostname asatest
domain XXX.com
activate 8Fw1QFqthX2n4uD3 encrypted password
g9NiG6oUPjkYrHNt encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 10.1.1.253 255.255.252.0
!
interface Vlan2
nameif outside
security-level 0
address IP XXX.XXX.XXX.XXX 255.255.255.240
!
passive FTP mode
clock timezone PST - 8
clock summer-time recurring PDT
DNS server-group DefaultDNS
domain vff.com
vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0
access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0
pager lines 24
Enable logging
timestamp of the record
logging trap warnings
asdm of logging of information
logging - the id of the device hostname
host of logging inside the 10.1.1.230
Within 1500 MTU
Outside 1500 MTU
IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server protocol nt AD
AAA-server host 10.1.1.108 AD (inside)
NT-auth-domain controller 10.1.1.108
Enable http server
http 10.1.0.0 255.255.252.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 10.1.0.0 255.255.252.0 inside
SSH timeout 20
Console timeout 0
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal group vpntest strategy
Group vpntest policy attributes
value of 10.1.1.108 WINS server
Server DNS 10.1.1.108 value
Protocol-tunnel-VPN IPSec l2tp ipsec
disable the password-storage
disable the IP-comp
Re-xauth disable
disable the PFS
IPSec-udp disable
IPSec-udp-port 10000
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpntest_splitTunnelAcl
value by default-domain XXX.com
disable the split-tunnel-all dns
Dungeon-client-config backup servers
the address value vpnpool pools
admin WeiepwREwT66BhE9 encrypted privilege 15 password username
username user5 encrypted password privilege 5 yIWniWfceAUz1sUb
the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username
tunnel-group vpntest type remote access
tunnel-group vpntest General attributes
address vpnpool pool
authentication-server-group AD
authentication-server-group (inside) AD
Group Policy - by default-vpntest
band-Kingdom
vpntest group tunnel ipsec-attributes
pre-shared-key BEKey123456
NOCHECK Peer-id-validate
!
!
privilege level 3 mode exec cmd command perfmon
privilege level 3 mode exec cmd ping command
mode privileged exec command cmd level 3
logging of the privilege level 3 mode exec cmd commands
privilege level 3 exec command failover mode cmd
privilege level 3 mode exec command packet cmd - draw
privilege show import at the level 5 exec mode command
privilege level 5 see fashion exec running-config command
order of privilege show level 3 exec mode reload
privilege level 3 exec mode control fashion show
privilege see the level 3 exec firewall command mode
privilege see the level 3 exec mode command ASP.
processor mode privileged exec command to see the level 3
privilege command shell see the level 3 exec mode
privilege show level 3 exec command clock mode
privilege exec mode level 3 dns-hosts command show
privilege see the level 3 exec command access-list mode
logging of orders privilege see the level 3 exec mode
privilege, level 3 see the exec command mode vlan
privilege show level 3 exec command ip mode
privilege, level 3 see fashion exec command ipv6
privilege, level 3 see the exec command failover mode
privilege, level 3 see fashion exec command asdm
exec mode privilege see the level 3 command arp
command routing privilege see the level 3 exec mode
privilege, level 3 see fashion exec command ospf
privilege, level 3 see the exec command in aaa-server mode
AAA mode privileged exec command to see the level 3
privilege, level 3 see fashion exec command eigrp
privilege see the level 3 exec mode command crypto
privilege, level 3 see fashion exec command vpn-sessiondb
privilege level 3 exec mode command ssh show
privilege, level 3 see fashion exec command dhcpd
privilege, level 3 see the vpnclient command exec mode
privilege, level 3 see fashion exec command vpn
privilege level see the 3 blocks from exec mode command
privilege, level 3 see fashion exec command wccp
privilege see the level 3 exec command mode dynamic filters
privilege, level 3 see the exec command in webvpn mode
privilege control module see the level 3 exec mode
privilege, level 3 see fashion exec command uauth
privilege see the level 3 exec command compression mode
level 3 for the show privilege mode configure the command interface
level 3 for the show privilege mode set clock command
level 3 for the show privilege mode configure the access-list command
level 3 for the show privilege mode set up the registration of the order
level 3 for the show privilege mode configure ip command
level 3 for the show privilege mode configure command failover
level 5 mode see the privilege set up command asdm
level 3 for the show privilege mode configure arp command
level 3 for the show privilege mode configure the command routing
level 3 for the show privilege mode configure aaa-order server
level mode 3 privilege see the command configure aaa
level 3 for the show privilege mode configure command crypto
level 3 for the show privilege mode configure ssh command
level 3 for the show privilege mode configure command dhcpd
level 5 mode see the privilege set privilege to command
privilege level clear 3 mode exec command dns host
logging of the privilege clear level 3 exec mode commands
clear level 3 arp command mode privileged exec
AAA-server of privilege clear level 3 exec mode command
privilege clear level 3 exec mode command crypto
privilege clear level 3 exec command mode dynamic filters
level 3 for the privilege cmd mode configure command failover
clear level 3 privilege mode set the logging of command
privilege mode clear level 3 Configure arp command
clear level 3 privilege mode configure command crypto
clear level 3 privilege mode configure aaa-order server
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4
: end
Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.
The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.
On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.
-
custom palette with tabs to swf Flex cannot access the local file system
OK, with Flash Player 10, we can load and save local files from a flex web application, then why can't I in the bridge, when I load the SWF in a palette with bridge tabs, load and save functions no longer work.
Is it because I'm loading as a ScriptUI called range of flash, instead of a palette of HTML?
I tried the overall Flash Player security in order to allow the authorization of my swf and created a .cfg, but nothing seems to work.
Help, please.
Thank you, Todd
I don't know exactly how your Panel is a failure. I have attached three examples of Flex projects that include the JavaScripts and Flash panels for bridge. These all worked for me in Bridge CS4.
To access the local, I used FileRefrence.save () for these tests - note that this method is file system was added in Flash Player 10, and so this will not work in Bridge CS3, which uses the Flash Player 9 when you use a widget Flash Player in ScriptUI. In addition, to compile the example I had to modify the Flex builder projects require Flash Player 10 by changing the settings on the page 'Flex compiler' project in Flex Builder settings.
If you use another method to access the system files that works with Flash Player 9, please let me know what it is and I can test it.
Among sovereign wealth funds also gain access to the network. To activate SWF access to the network, I had to add a file of global security settings. Information on creating these files are available here:
http://www.Adobe.com/devnet/flashplayer/articles/flash_player_10_security.PDF
But, for example, on my mac, I put all these projects in a "BridgeFlashPanels" folder on my desktop. Next, I created the BridgeFlashPanels.cfg file in/Library/Application Support / Macromedia / FlashPlayerTrust. The .cfg file had a line: the path to the folder on my desktop.
A description of the panels:
PanelWithNetworkAccess - this Panel has a 'Test' button, when clicked, loads http://www.adobe.com and place it in the text box (note, it will be just the raw HTML, does not make the page).
PanelWithFileSystemAccess - for Flash Player 10 only, this Panel has a Test button and a text field. When you click the Test button, it writes the contents of the text box in the BridgeTest.txt file, unless you choose another file.
PanelWithNetworkAndFileSystemAccess - for Flash Player 10 only, this Panel has a text field and two buttons: "Load Test" and "Test to save." The load test loads http://www.adobe.com in the text field and save him testing saves the content of the text field to BridgeTest.txt.
To try signs, navigate the bin-debug for each project files with Bridge, the .swfs and .jsx files are there. Double-click the thumbnail for the .jsx and bridge must run the script and add the sign indicating the SWF file.
-David
-
The local users and 'Add Member to group' groups function displays the password in clear text
Hello
I saw something strange that happens when you add the connected locally to the domain user to a local security group via lusrmgr.msc. This seems to be repeated in our Organization, and I was wondering if it's something to do with our generation, or if it is more widespread? After you have selected the locally connected user (domain) to be added to a local security group, but before confirming with OK / apply, the user name appears in the ACL in the format:
Domain\username (password@fulldomain)
The password appears when the user name should be, which is probably just a minor bug where an incorrect value is selected on the screen, but the fact that it is displayed in plain text rather than a hash of password is a little more disconcerting. There seems to be some caveats: it affects only the users in the domain (local users are displayed differently); It is not affected by the local administrator rights (although /are/ to add the user to the local administrator rights); It doesn't affect that the user logged on locally (I can't reproduce as a runas user).
The steps to reproduce this are:
(1) start | Run | lusrmgr.msc
(2) go to the groups. [Any group] | Right-click | Add to group
3) click on add
(4) enter the username of the user locally. OkAnyone else see this behavior?
See you soon,.
Dines keV
Hello
The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
http://social.technet.Microsoft.com/forums/en-us/category/w7itpro
Hope this information is useful.
-
Cannot access the local admin page after first start
Hello
I am not able to access my newly purchased RN202, SN 45Y2535W003FC. I just plugged the power cable and turned on, but the power light keeps blinking even after hours. The NAS will connect to my local network with the ip 192.168.178.32 and ends by RAIDar under this address. However, the local admin under https://192.168.178.32/admin and https://192.168.178.32 page (even with http://) is not accessible. The connection is not accepted (cannot be connect-page in the browser). Also access more ReadyCLOUD is not possible, because the NAS cannot be discovered. Currently, there are no hard drives in the NAS. I also tried to insert a HARD disk already formatted in combination with a factory reset, but it does not work with the same result. It's already a replacement unit by my retailer the first device showing the same behavior, so I excluded a technical defect. What I am doing wrong? Any help would be greatly appreciated.
Best regards
Patrick Schmidt
OK I found the solution by myself. Without a HARD disc inserted the NAS will not start correctly. As mentioned, I already tried to insert a HARD drive and then do a factory reset. Now, I saw that I have is to not properly place the HARD disk. If you open the lock on the grid (the thing in which you put the HARD drive), then you can not insert in the case completely and do not connect the connector of power und data. Maybe a little more detailed manual on it (for Dummies like me) would be useful. Argh...
-
I took to allow a user to administer by checking the box "Allow user to administer this computer" of the user in the users window and groups in system preferences.
I tried to uncheck the box, but it remains unchanged.
You must be logged in as a different user than the one you are trying to change, and your own user name must be an administrator on this system.
-
Portege R500 - cannot remove the password user and supervisor
Hoping someone can help me with a problem,
I voluntarily put a password for user and supervisor on one of our Portege R500.
I know what the password is, but I just want to remove so that I am not prompted for the password whenever the laptop is turned on.I seem to be unable to disable this feature, which is a problem that the laptop is about to be reassigned to a differnet use that would be impractical for users to have to put a password on startup.
He must have a way to disable the password requirement.
Of course, you can disable this password. Just use the same way you used to.
It can be done using Toshiba Assist > Secure. You used this way to get into these options, you? -
Cannot access the Zune Marketplace and iTunes store.
Since yesterday, I am unable to access the Zune marketplace or the iTunes store. I have access to the internet. They both tell me that I don't have an internet connection. I have an internet connection through Comcast.
Do you have a suggestion?
Hi Mariposabarb,
A. What is the exact error message?
B. recent changes made on your computer?
C. you are able to connect to Zune and iTunes using other internet browsers?
Check that your Date, time, and time zone are correct.
1. click on start
2. click on Control Panel
3. click on "Date and time".
4. click on the button to change Date and time
1. If the Date and time are incorrect.
5. click on the Change time zone button
1. If the time zone is incorrect
After making the changes - restart the computer, and then run the Zune software and see if it fixed the problem - assuming that the Date, time and timezone were incorrect.
Check links for iTunes below.
ITunes for Windows can not access the Internet if the proxy settings are incorrect
http://support.Apple.com/kb/TS1490If nothing works, you can try toreset the internet settings explore default. Open the link below and click it on theFIXIT button.
http://support.Microsoft.com/kb/923737
Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
How to troubleshoot wireless connection problems and updates to Zune Marketplace issues that occur when you use your Zune device
http://support.Microsoft.com/kb/956611Error message when you try to connect to the Zune Marketplace: "unable to connect to Zune, please try again later".
http://support.Microsoft.com/kb/928104I hope this helps.
Bindu R - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hello
I have 3 pages, that's all first my login page if the user is valid, then go to the second page, on the second page, I enter the data for the user and after you enter the data, I'm going to the next page but for this 3rd page I get network error (Try Again), but this code works fine on google chrome browser my machine.
What is the problem here?
After the installation of new WebWorksSDk, my problem is resolved automatically...
Maybe you are looking for
-
You can search the Exchange e-mail on 4.0.4 ICS?
Hello
-
Windows 7 Ultimate Language Packs to update
I upgraded my Windows 7 Ultimate Version home today. But I do not see the update in Windows Update optional language packs. Does take a while to get the Language Pack update after I've updated in Windows Ultimate?
-
Get the popup on Win 7 Security 2012, received before
Once more Win 7 Security 2012 (the system security alert) keeps popping upand prevents me from doing anything on my computer! He claims that I have a virusand I am in great danger. I can't get rid of it. It is not legitimate, is it? It says my system
-
EA4500 doesn't have a firmware update?
Due to a new internet connection and router free (Fritzbox... very decent) my new ISP, I got the idea to stop using us as a bridge on the floor of the seconds of my house and the EA4500 as my main router. I connected it connected to my PC and I saw t
-
Sample application blackberry for beginner developers
I noticed from time to time on this forum there are beginner developers, ask for help on the HelloWorld sample standards application. I wrote a simple blackberry application and attached it to this message. This application is well commented. When co