SWF not showing seen online

Similar Questions

• file Gallery .swf not showing after loadMovie() in one of the mc

  Hi I am trying to embed a .swf Gallery (by craftymind) file in my page within one of my frame.
  tried to load the swf file in a mc and it shows very well, but I can't get it to show the pictures.
  I was stuck with this a whole day and can not go forward... pls help.
  
  link to the gallery .fla file: http://www.mustardlab.com/developer/test/new/gallery.zip

  try adding:

  This ._lockroot = true;

  for the main timeline of the SWF Gallery.

• Centers of my web page into design mode, but not when seen online.

  I am new to web design and of course, on this forum.  I had some experience in VBA and Fortran, so when the original designer left, I was the only one in the Organization, ready to attack the site and try to teach me how to do work and keep up-to-date.  We were financially in the Red at the time, so hiring outside help would have been almost impossible.  We break finally even now, which was our objective as a non-profit organization.

  So I got the computer and the responsibility of maintaining the Web site at a non-profit for children in Florida a couple of years ago, and I'm doing fairly well with it so far, even though my level of knowledge is very deep.  AsI has said before, I am completely self-taught, mainly by the method of trial and error, so please excuse what probably is a very basic question.

  My site is FloridaBandTournament.com.

  The site works well enough for my users, but from an appearance point of view, the pages are always on the left side of the screen.  I would like to focus the pages on the screen so that it looks a little better.  They are on a black background - do not know how the background got there, but it works very well for me.  When I tried centering the pages, I googled my way to the statement text-align: center, and after placing a few different places in the code, he suddenly seemed to work, at least in the in Dreamweaver 8 (I also inherited from the software, which is I know is old, but if I'm--will be 70 soon, and make my work free of charge to the Organization).  But when I went to a couple of different browsers, it still shows the site on the left.  I tried Firefox and IE.  I am at a loss to know what to do.

  When I found this forum, I thought that maybe someone could help me figure out what to do to make the balance of the page in a simple way for this old geezer.  I would of course welcome.

  I don't know what I should talk to you, but I thought that if I sent the code in the body, it might be useful.

  The body code is as follows:

  [body

  background-image: url (file:///C|/Documents and Settings/user/Application Data/Macromedia/Dreamweaver 8/configuration/ServerConnections/www/images/background.gif):

  background-color: #000000;

  margin-top: 0px;

  left margin: 0px

  margin-bottom: 0px

  margin-right: 0px

  text-align: center

  ]

  None of the pages in the current site have this code again - I have a page of the trial that I have tested.  The trial page is accessible from the link at the bottom of the 'Links' page to "Show host Infoormation" (the misspelling is temporary and intentianal so I can find the darn test link myself when I want).

  I would be happy to provide any information that could help someone understand what I have and what I'm trying to do, but again, I am self-taught, so I have little understanding of the technical terms.  Of course, I'd appreciate any help.  Thanks in advance.

  Bob

  Obviously first make a back-up of the pages/sec.

  Switch to code view in Dreamweaver and find the html below. Its near the top of the page after the css. You don't need the first table

  so you can remove that. This is the second table that we are interested. Below, I've added id = 'WrapperPage' opening

  Then add to your css styles in the head section of the page.

  {#pageWrapper}

  margin: 0 auto;

  }

  You will need to do this for each page of the site you want centered, that could be a pain if you have a lot of pages.

  As your background image is linked to your local computer it's why you do not have a black background instead:

  {body

  background-image: url (file:///C|/Documents and Settings/user/Application Data/Macromedia/Dreamweaver 8/Configuration/ServerConnections/www/images/background.gif);

  background-color: #000000;

  left margin: 0px;

  margin-top: 0px;

  margin-right: 0px;

  margin-bottom: 0px;

  }

  If you want the image to appear change the link as below:

  {body

  background-image: url(images/background.gif);

  background-color: #000000;

  left margin: 0px;

  margin-top: 0px;

  margin-right: 0px;

  margin-bottom: 0px;

  }

• SWF not showing file does not even with the downloaded scripts

  I have had this problem initially but worked I need download the scripts I've done and everything was great. Now, after a few minor changes, the menu has disappeared, scripts are there so I can't quite work on whats going on? Link:
  
  Homepage
  
  I looked in the code and everything seems out of place is: < noscript > < / noscript > but then I took the menu completely and tried placing it back on but still nothing.
  
  Any suggestions much appreciated - Cheers

  Firefox tells me-

  AC_FL_RunContent is undefined
  [Break on this error] AC_FL_RunContent)
  'codebase',' http://download.macromedia.com/pub/shockwave/cabs/...

  Looking at your code, I see-

  You should get used to do the same thing!

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "Oli_Wales" wrote in message
  News:gb7q5k$Go7$1@forums. Macromedia.com...
  > I have had this problem originally but work that I needed to download the
  > scripts file that I did and everything was great. Now, after doing a few
  > changes minor, the menu has disappeared, the scripts are here so I can't
  > enough
  > work on whats going on? Link:
  >
  > http://www.parkmillstudios.com/vlas/index.html
  >
  > I looked in the code and everything seems out of place is:
  > but then I took the menu completely and tried to put
  > It
  > back in but still nothing.
  >
  > Any suggestions much appreciated - Cheers
  >

• not showing live SWF file

  good, using Flash and Dreamweaver CS3
  
  seen a few similar positions that were either pending or more variable and the complexity in question... I HOPE mine is a simple open-palm-to-the-front "duh"... Difficulty...
  
  field in question is
  www.499fico.com
  
  I have an account paid hosting with a lot of compensation of transfer and use
  
  There are three files downloaded in my folder on the server:
  499TEMP.swf
  Ac_runactivecontent.js
  index.html
  
  The document html itself contains text example and just the embedded SWF...
  (I put the text in the html page and tested to make sure it would display and it does)
  the problem is, it does not show the SWF at all from the server/live
  
  I tested it on locally and it worked quite well when I the direct test, it does not show the SWF at all, which leaves me just with sample text and a crappy grey screen.
  
  I've done this before and had absolutely no problem (I have a very similar to www.providencecommercialfunding.com site that has been set up exactly the same way). Is we worked very well and still...
  
  Yet, for some reason any on the site 499fico.com, the SWF is just appearing not living...
  
  If anyone can help I'd be very happy it... i'm going mental here...
  
  Thanks in advance,
  J
  
  
  

  finished fixing my problem... It WAS a problem on the server, not a script problem

  for some reason, that the directory on the side of my hosts had no a "Scripts" folder in the main directory and the script had this folder in the path, (just as it does on the local folder).

  just as I was hoping, a moment "duh"...

  I hope that this can at least help someone else with the same problem...

• I just uploaded a new site to an existing via filezilla domain. It worked great and my site is up, but I have a problem that does not show when he would be seen in the fake browser Adobe Catalyst. I have a logo in the left corner on the my

  I just uploaded a new site to an existing via filezilla domain. It worked great and my site is up, but I have a problem that does not show when he would be seen in the fake browser Adobe Catalyst. I have a logo in the left corner of the page master. In Muse, he shows that he is in the right place, and when I go to preview, is also in the right place. When I went to live with my Web site, it shows that the logo is off, to the left and not at all in the right place. Any ideas on what I can do to move this and stay in the right place. Everything I have on the master page is prominently in the live version.

  Probably, you have a box or empty text box somewhere see this thread for the fix: Bug Muse | Graphics shift randomly, why?

• Imported video does not show what moving published file swf to another location

  I wonder if there is something I need to do for the video file imported to embed in the swf file. When I move the file published to another location, the video does not show. When it is played in the same location as the fact that publication, he plays very well. When I move the video file to the same location as the swf file that is published on another computer, it does not seem to see it. I don't know how to solve this problem. Looking for suggestions. Thank you!

  Got it, thanks again! I actually got to work by converting the mov to flv and video integration.

• The path to nowhere - help! SWF files shows no not in the browser

  I need help to get a swf file to display in browsers. (he presents in preview in dreamweaver)

  created a Web site in dreamweaver cs4. created a simple slide show in flash 4.

  on the index.HTML page insert the flash file.

  It presents a preview in dreamweaver, BUT when I have the text in browsers, it shows as a white box.

  read through all the news on paths etc.

  You can simplify this entry below adninjastrator on the seven of 19 2011 adobe forums? ........

  "Always looks like a problem of path for me. For review:

  Path problems

  Almost always, when it works on the local computer and not by the server, it's a path problem.
  You can put your related Flash files into whatever the desired files, they don't have to be at the root, they are NOT all in the same folder. But if you have a problem and their stick it all in the works of root folder, and then, you know that the question was a path problem.
  Remember that used paths in the .swf is compared to the Web page on which is placed the .swf, NOT it's physical location.  Thus, for example, that if your .swf is located in the flash/data folder and you use .swf on a Web page in the root folder, you are in effect, remove this data/flash .swf and put them in the root. So if the .swf is responsible for all associated files (xml, images, video, etc.), the path used inside the .swf to load the .xml file must be compared to its new location in the root and then go back to flash/data. This is true even if when you test the .swf by itself, it can be inside the flash/data and work very well, as compared to its location, the path is very good, they are in the same folder. But if this same path is used when the .swf is placed on a folder page level two upward, the relative path has changed, the old "same folder" path will not work.

  In fact if you place the .swf on a web page in a different folder as the .swf is stored in, and that .swf called foreign assets, then heading by clicking on and open the .swf in his file should NOT work! This is because the paths to the external assets must be relative to the Web page and not the physical location of the .swf.
  So just remember that you use an address from the last Web page (file not physical locations) and you can put related Flash files in folders what ever you want.
  Best wishes
  Look for the video

  adninjastrator ".
  

  Here is my code...

  < div align = "center" >

  < object classid = "clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width = "350" height = "200" id = 'FlashID' title = "2812gtbroslides" > "

  < param name = "movie" value = "" / 2812gtbros.swf "/ >"

  < param name = "quality" value = "high" / >

  < param name = "swfversion' value ="6.0.65.0"/ >

  <!-this param tag prompts users with Flash Player 6.0 r65 or later to download the latest version of Flash Player. Delete it if you do not want users to display the prompt. ->

  "< param name ="expressinstall"value="/Scripts/expressInstall.swf "/ >

  <!-next object tag is for non - IE browsers. Then he hide from IE using IECC. ->

  <!-[if! IE] >->

  < object type = "application/x-shockwave-flash" data = "" / 2812gtbros.swf "width ="350"height ="200">"

  <!-<! [endif]-->

  < param name = "quality" value = "high" / >

  < param name = "swfversion' value ="6.0.65.0"/ >

  "< param name ="expressinstall"value="/Scripts/expressInstall.swf "/ >

  <!-the browser displays the following alternative content for users of Flash Player 6.0 and higher. ->

  < div >

  < h4 > the content of this page requires a newer version of Adobe Flash Player. < / h4 >

  " < p > < a href =" http://www.Adobe.com/go/getflashplayer_fr "> < img src = ' http://www.Adobe.com/images/shared/download_buttons/get_flash_player.gif "alt = 'Get Adobe Flash player' width = '112' height ="33"/ > < /a > < /p > "

  < / div >

  <!-[if! IE] >->

  < / object >

  <!-<! [endif]-->

  < / object >

  < br / >

  thanx

  wwwww1325

  If it works on the server but not on the spot, may be a local computer security problem. Sometimes there are problems of security on the local computer during the trial of all the Flash files that include any code that tries to establish an Internet connection, (even if it's to get the logo .gif Adobe used in the code "Download the latest version here").

  IE displays a bar of permission to Active X you need to 'allow '.

  But first of all, is it a problem or issue of DreamWeaver or a browser problem/questions? I mean when you "Preview", is that actaully in a browser?... so it does not appear in Web browsers you are testing in but don't see in DW?

  So I can't exactly tell what your particular problem, but my guess is that this is a security issue or there is something else that you missed and did not mention that is causing problems.

  Best wishes

  Adninjastrator

• Airport not showing is not as network device?

  My Airport Extreme 802.11ac does not appear in the finder as a network device. It showed in the previous Extreme model I was using, then leave for any reason any. After messing around for a month or two, then trying to get it working again, I bought the new 802.11ac AE, but it does the same thing.

  I have two other devices that appear in the finder under the shared part of the side bar of the Finder window, but cannot figure out how to show by EI. The wireless feature works very well, as a printer BSE connected to the USB port of the AE. Internet

  It would be different if I was using the IP address of the type 10.x.x.x instead being in bridge mode and using 192.168.1.X?

  Any suggestion is appreciated.

  My Airport Extreme 802.11ac does not appear in the finder as a network device

  In the finder it will show only upward if you have a connected USB drive.

  It showed in the previous extreme model that I used

  Only if you have the network resources available to him.

  Computers will be displayed, because they offer resources network, the PF to be exact.

  But the airport will not be displayed. Mine is not, and never has.

  My Time Capsule arises because it is a hard drive offering services of files on the network.

  Printers will not appear in the finder no longer...  Again, I have printers online... they do not show in finder and never have any version of Mac OS X, I used.

  However a printer with USB or SD card slots and a wired card which offers services of files on the network may appear... In the only finder services files will be displayed.

  EI has to offer network file services appears in the Finder... Plug a USB stick into the USB port and set it to share on the network and the AE will then appear in the finder.

  The place that you are looking for your AE's utilitarian Airport... It's the Apple of method available to see you the configuration of EI... no viewfinder.

• Why my network connection properties do not show more UAC prompt?

  I can't put my connection properties more. In network & sharing center when I rightclick > properties on the connection interface, it shows no UAC prompt. I have disable Netbios over Tcp/ip, but every time that I connect it changes to default (enable netbios..). I'm the only Admin with 2 profiles on my personal laptop without connection (wired / wireless, office, etc.) of local network either. Earlier, the same connection worked fine with the settings 'disable netbios. I tried to create the new connection (same ISP, USB 3 G dongle), reinstalled the drivers of network cards, deleted the old connections, but the problem persists. I can't set my connection properties!

  I noticed most of my local network/Services have a profile not attached with long unknown password. New connections I make in a user profile does not show in my another user profile, it wasn't like that before. I want to know the default TCP/IP registry, in particular Linkage, Bind, export etc if this may be the reason. (Values in HKLM/System/CurrentControlSet/Services/Tcpip/liaison & Interfaces examples / by default). Of course the values may differ in each machine, but I want to have an idea.
  Finally, I would like to see some improvements in security in the next editions of windows. UAC never warn you when some outsider load .reg hives or changes to the settings, it annoys only his own user/admin. Our firewall is open for the subnet Local in the discovery rule of the network for the network private by default, assuming that we are all connected to the cable network of offices. There is also two versions of the firewall for home users specific & businesses users. It is impossible to uninstall a Service it it gets corrupted or protect the process svchost.exe/legit if someone hacks. Coz anti-virus software fails to catch the thieves hidden legitimate process. UPnP, printer ports, of the discovery of the network are all known loopholes in windows firewall forget remote things. If someone makes an unknown connection to my PC something must warn me at least. With fast connections to today I don't think that any Messenger needs firewall exceptions. It is unclear what programs/services the firewall knows & blocks ("all programs/services that meet the criteria"), it should be editable to all net database using software/services, which can be exploited by the bad guys. I don't see any logic in the purchase of an operating system, then buy a firewall too, it should meet. Also a protection tool for our vulnerable register which is originally from the success of a rival to round shape & red/green color used to make a pie & a big city is named after it. :-)
  Thank you! -Manish. 17/10/12
     
  Hi, Maria Teresa K,.
  Thanks for the reply with some good suggestions & I love your header "Refreshing Office & opening word doc", operations, sometimes even what is more difficult and more complex are easier in windows.
  -Very well, it was related to administrative privileges removed by a hacker or my ISP. As I've seen Undocked profiles with long password in most Network Services & Local such as RPC, BFE.
  I wasn't starting in safe mode with networking (press F8 at startup), then then ran mode Directory Services repair as well. Finally called my ISP was no Sim Card of my 3G dongle. is CHANGED!
  Then as a last solution, I have my Dialer app right click & he ran as administrator. This time I could see UAC prompt while clicking network map & could set the connection properties.
  You were right about my two profiles being Admin & it took place in both, so they used netuser thing (that infamous Director of integrated hidden a/c. which is not known by the users but is well exploited by hackers). I saw this profile sunflower photo in my profile %-appdata-temp folder, I use different images for my two profiles. Also, someone wrote to Parvdm port I checked later, I don't have any printer at all, so this hack port printer & file and printer sharing is the culprit. Anyway now it seems fine, only this soft dialer privilege token is set, then run it as administrator, it's funny that I am the admin.
  Yes, I ran several system restores but this intrusion is older that my restore point limit, yet once no way to keep/save our best Point restaurant forever. Not sure/easy way to fix a corrupted user profile, to copy all in a new, most of the software refused to work, a lot of customization needs to be redone. This change of name ntuser.dat is too scary, what happens if I can not log on later, I had a nightmare with LogonUI.exe when I applied a 3rd party desktop theme shit earlier, I had to reinstall windows. So start, logging on things that I dread, all must keep a portable external drive with windows & its profiles.
  Now, I read & know using Standard user instead of administrator has a/c. for browsing the net, but this theory does not work in practice so many apps to keep updated/re-installing 5.0.6.1 versions each week, and many apps produce UAC guests. Half my time wasting on typing Admin password in the profile Standard exposed, much easier for keyloggers to record it & then secondary logon also runs with remote registry, management of firewall remotely etc. OK, they are not checked in my Public network, but they are in the list of the firewall exceptions for can not show WARNING!
  My current problem is solved, but I insist on these few things to develop;
  (a) a separate tool for the Protection of the independent record.
  (b) with HKLM and HKCU a separate HKLW & HKCW for Windows registry keys that is Unchangeable no matter what. To do this, future apps should be as portable as possible.
  (c) more intelligent firewall multimode, antivirus, recovery tools built in, checked the IP range for windows updates/upgrade. Services and process manager.
  (d) the names of files dynamic with static virtual names for the same. Password for any whole folder/usb/removable/external drive.
  (e) all the hidden info, exposed in detail to the owners of the OS, not for some professionals, don't worry not bad know all this, so why hide from users. for example, I don't like the unknown password in BFE service responsible for firewall, if it is managed by others, then what am I doing here! In order to better help files offline if you please.
  (f) all stay is discussed by experts revered worldwide.
  Thank you! -Manish. 21/10/12

• Category portal provider not showing on PlayBook

  Has anyone seen where several categories defined in the portal provider for a product does not show this product in the PlayBook for the two?  Magellan compass is set for 'Maps & Navigation' and 'Local search', but he appears under "local search".  Could someone confirm on their device and if it a known issue?

  John, it's not the multiple categories, and the apps are in a single category. What you see, is a top-level category and subcategory.

  It is confusing because many or all categories have the same subcategories of 'catch-all'.

  For example, battery Guru is listed in utilities-> Utilities. Your application of Navigation Maps &-> local search.

  I think you need to just change the subcategory Navigation Maps &, because where it is more likely people will look.

• Container not showing does not correcly in Internet Explore 11

  Hey guys!

  Hoping to get some help here because im about to pull out my hair...

  So im building a site pretty basic for a friend and I arrived at the stop and do not know how to continue. my understanding of Dreamweaver is limited but did play with it many years ago, but what I did I found one of these free patterns online and changed according to my needs and chrome, it looks exactly how I want but of course it does not show the container with my att backound all in Internet explore and everything looks messed up.

  while I have not published in fact the site but I hope for some advice from someone here :-)

  Basically, that's what I want it to look, and what it looks like in Chrome

  [url =http://postimg.org/image/ejs8hmpj9/] [img] http://s2.postimg.org/ejs8hmpj9/image.jpg [line] [/ url]

  This is what it looks like in Internet Explore 11

  [url =http://postimg.org/image/edde2g7lb/] [img] [line] http://s3.postimg.org/edde2g7lb/not_ok.jpg [URL]

  Reall appriciate help

  Here is my code

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = iso-8859-1 "/ >"

  < title > Malmö Catering < /title >

  < link rel = "stylesheet" type = "text/css" href = "style.css" / > "

  < style type = "text/css" >

  <!--

  . Style1 {make-size: 18px}

  {.style2}

  do-size: 16px;

  color: #FFFFFF;

  }

  {.style4}

  do-size: 16px;

  make-weight: bold;

  }

  .style6 {color: #142D1A}

  ->

  < / style >

  < / head >

  < body >

  < div align = "center" id = "container" >

  < div id = "header" >

  < table width = "545" height = "203" border = "0" bgcolor = "#FFFFFF" >

  < b >

  "" < td > < div align = "" > < img src = "... / thanks MalmoCatering" alt = "" width = "503" height = "137" / > < / div > < table > "

  < /tr >

  < /table >

  < / div >

  < div id = "left" >

  < div id = "navcontainer" >

  < ul id = "navlist" >

  < id li = "active" > < a href = "index.html" > < span class = "style6" > V & licence; "" lkommen </span > < /a > < /li >

  < class li = "green" > < a href = 'Page 1.html' > < span class = "style6" > Om oss </span > < /a > < /li >

  < li > < a href = "Page 2.html" class = "style6" > < span class = "style6" > Landg & aring; Ngar </span > < /a > < /li >

  < li > < a href = "Page 3.html" > < span class = "style6" > Fisk & amp; Skaldjur Sm & ouml; RG & aring; SAR </span > < /a > < /li >

  < li > < a href = "Page 4.html" > < span class = "style6" > K & ouml; TT Sm & ouml; RG & aring; SAR </span > < /a > < /li >

  < li > < a href = "Page 5.html" > < span class = "style6" > Kallskuret </span > < /a > < /li >

  < li > < a href = "Page 6.html" > < span class = "style6" > Sm & ouml; RG & aring; St & aring; lrco </span > < /a > < /li >

  < li > < a href = "Page 7.html" > < span class = "style6" > Sallader </span > < /a > < /li >

  < li > < a href = "Page-8.html" > < span class = "style6" > Ciabatta & amp; Beading </span > < /a > < /li >

  < li > < a href = "Page 9.html" > < span class = "style6" > Buffe & amp; Annat gott </span > < /a > < /li >

  < li > < a href = "Page 10.html" > < span class = "style6" > Snittar </span > < /a > < /li >

  < li > < a href = "Page 11.html" > < span class = "style6" > Hitta hit </span > < /a > < /li >

  < /ul >

  < / div >

  < h4 align = "left" class = "style6" > < / h4 >

  < h4 > < / h4 >

  < / div >

  < div id = "right" >

  < blockquote >

  < table width = "401" height = "49" border = "0" >

  < b >

  < td > < div align = "center" >

  < class = "style4" p > V & licence; lkommen < /p >

  < class p = "style4" > _ < /p >

  < / div > < table >

  < /tr >

  < /table >

  < p align = "center" class = "style1" > Det och det mesta b & licence; STA inom Matt Kell... < br / >

  Best Ingen & licence; llning & licence; f r & ouml; stor eller f r & ouml; r sv & aring; r! < br / >

  V & licence; LJ din favorit och njut... < /p >

  < p > < / p >

  < p > < / p >

  < p align = "center" class = "style1" > & Ouml; ppettider < /p >

  < p align = "center" class = "style1" > m & aring; nofonofo - fredag 08.00 - 18.00 < /p >

  < p align = "center" class = "style1" > l & ouml; rdag 08.00 - 17.00 < /p >

  < p align = "center" class = "style1" > s & ouml; nofonofo 09 - 14.00 < /p >

  < class p = "name" > < / p >

  < / blockquote >

  < table width = "520" height = "38" border = "1" align = "center" bgcolor = "#142D1A" >

  < b >

  < td > < div align = "center" > < span class = "style2" > Malm & ouml; Catering Lantmannagatan 11 Malm & ouml; Telephone 040-97 00 05 < / span > < / div > < table >

  < /tr >

  < /table >

  < p > < / p >

  < p > < / p >

  < / div >

  < / div >

  < / body >

  < / html >

  98% of the rendering problems are related code.

  Use the W3C validation service and fix the errors reported.

  The W3C Markup Validation Service

  I see a few problems.

  #1 you use a strict doc type.  Transitional provision might work better.

  #2 Align is invalid code. Use CSS.

  #3 table height is invalid code.

  Nancy O.

• A license transfer is possible for me to do? I don't have access to my original account and have a new account which does not show buying CS6. I need to my SR # to re - install on a new computor.

  I don't have access to my original account and have a new account which does not show buying CS6. I need to my SR # to re - install on a new computor.

  I've been frustrated by my efforts in the past and cannot find this purchase which I have a copy in front of me now, in my online account information.

  You can try saving your old product in your new account. Should he be rejected because you do not have your serial number or headquartered in your old account you can no longer access. You may need this evidence to deal with Adobe customer service... This document you may be what is needed.  Your serial number was on the cover of the DVD on a sticker glued on.

• Can not cancel my online account as it says I'm in a free 30-day trail however I was charged my subscription yesterday?

  Can not cancel my online account as it says I'm in a free 30-day trail however I was charged my subscription yesterday?

  Jasmine

  If you subscribed and the popup shows a window message trial, please see this link for the resolution:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  If not, is it possible that you have subscribed using a adobe (email) ID and you use a different adobe for your trial period id?

  You can access this link to reach support call/chat: (please do not forget that you are connected to your Adobe account)

  Contact the customer service.

  Guinot

• S3100 OTP plays not blu ray online content

  I can access netlix etc. home on the Player menu (although the connection is very slow, which works very well on my apple tv), but the player will not allow the contents of the disk online.

  For example, Zombieland and only survivor, the last two movies I bought, both have online content but the disc menu says "please connect your blu - ray player to the internet to allow online content."

  The drive is connected, it will not show just a link with the contents of the disk online.

  I tried both a Wi - Fi connection and wireless.  The problem persists.

  Any ideas?

  Hi Basementwaj,

  You can check if the BD Internet connection in Setup is set to allow. In the home menu, you must go through the installation> BD/DVD display settings> BD Internet connection> Allow. You can refer to the Operating Instructions for future reference.