Switch 10 battery health

Similar Questions

• Tecra A11 - Battery Health Monitor - Message: unknown

  Hello

  PC for my TECRA A11 - 12F battery health monitor (2 weeks) shows an unknown messageheatlh.
  If anyone else has had a similar problem and has it been resolved?

  What happens when you start laptop without battery and when the OS is battery charge will be added also? Battery is correctly recognized?
  In any case, the update of the BIOS is good solution.

  If you are not sure that you you need or how to update BIOS let us know.

• Equium L10-273 kept switching between battery and power

  Hello

  I saw a similar post here and I was wondering if anyone could tell me if they have had this problem sorted? My Equium L10-273 kept switching between battery and power all others second, which made it impossible to type, it's got worse and worse. I thought it was a problem with the power supply, but when I removed the battery from the laptop is ok running of the adapter.

  He kept also make a noise of hissing/crackling growing fan region, which stopped when I removed the AC adapter. The adapter was unusually hot, and the fan area became too hot to the touch. This stopped now, I removed the battery, so I want to know is what someone has solved this problem by replacing the battery or it should be returned?

  This laptop is less than 2 years old, but apart from his one year warranty.

  Hello

  According to the description of your problem, I think there is a problem of electronic power supply. Sorry but there is not a universal solution, and I recommend you contact the service authorized in your country. Explain the situation and see what they say.

• Lenovo G400s optimize battery health auto turn off display

  Hello

  I rarely use my laptop outside the power adapter, so I decide to try the 'optimize battery health '.

  To my surprise it drain the battery of 60% and he stopped there without discharge or charge, which is good.

  But it has a few side effects, it turned off my screen every minute which is annoying, in my power Option, my screen is set to never turn when I plug in, I even try to define each presets/profiles of never turn off screen when the plug-in or battery, it helps not at all.

  This could get really annoying when I read an article when my keyboard and mouse is not in use.

  Thank you for your attention, the hope for a solution soon.

  Details of the laptop:
  Lenovo G400s

  Core i5 - 3230 m

  Windows 8

  8 GB RAM

  128 GB SSD

  1 TB HARD DRIVE

  All the drivers/software updated

  Energy management: high power Performance management, optimize the battery, drive energy-saving hard.

  p/s: Please let me know if need more information, I will provide as much as possible to fix this.

  Okay, my bad, it was my stupid screen saver settings that enable the return to the logon screen after 1 minute.

  He was supposed to turn off when I set to (none) but I guess that I was wrong, in any case, this has been solved by "human error."

• How can I optimize my battery health? I am technologically challenged.

  1. I'm a fool to the computer. 2. my laptop Lenovo "told me" I should use "Battery optimized Mode health" because of the way I use my computer.  How do I do that? Where do you change the battery health optimized mode?

  I had the same opinion also. I found the way to do it. If you have not yet changed, you can follow this.

  1. click on the battery icon in the taskbar next to the date and time.
  2. click on "more power Options.
  3. "change plan settings".
  4. change advanced power settings
  5. There are two tabs when you click on this button. It said "Advanced settings" and the other says "Lenovo energy management." click on this last one that says "Lenovo energy management."
  6. click on the button that says "activate Lenovo Energy Management."
  7. you can see "Battery optimized" a second button of radiohead.
  8. you can leave right after.
  I hope this helps.

• Help! Aspire Switch 10 battery plugged NOT LOAD STOPPED @ 97%

  NEED HELP! I bought an ACER ASPIRE SWITCH 10 TABLET PC new one for less than a month. When I charge the phone, it stops at 97%. He reads as "97% available (plugged in, not charging). Please help me how to solve this problem... Thank you!!!

  This is a bug reporting by Windows, nothing to worry about. You can force the calibration of the battery by running until down then full charge. Scroll through a few times and it will end up showing the correct vakues.

• Adding a new Powerconnect 6248 switch to battery of existing production

  A happy user PowerConnect here.  I was wondering what were the experiences of others when you add an additional switch to an existing fireplace.  My stack of 4 switches Powerconnect run happily on my side LAN and add a 5th to the stack. Any thoughts?

  Here is a good article that deals with stacking Dell PowerConnect 6200 Series Switches.  Page 13, adding a member of the battery with minimal Interruption

  www.Dell.com/.../pwcnt_stacking_switches.pdf

  Hope this helps,

• Re: Satellite C660-125 - internet stop when switch to battery

  He was only a few weeks and I noticed that disconnect power cable a minute or two later, I lose the internet connection, even if the battery is fully charged.

  Looked at the menu of energy saving, but could not see option to stop that happening?

  Are you using a LAN or WLAN connection?

• Lenovo Energy Management optimized battery health decreases the performance of the CPU and GPU

  Hello!

  I have a little problem with my IdeaPad Y510P. When I select a maximum autonomy, everything works fine at maximum performance, but when I choose optimized battery, my laptop works about 50% of its performance or lower, which is enough when I'm not playing, but when I do, the decline in performance is really disturbing compared to the option of maximum battery life.

  Does anyone has a solution for this? I like to keep performance upward and the Crescent of the battery at the same time. I've updated my driver of the LEM and also software, and I use Win 8.1 64-bit.

  Thanks in advance!

  After a few days the problem solved self . Thank you very much for the help!

• No switching mode battery slice "sleep."

  I have a T520 (4240, BIOS 1.28) with batteries primary and 27 ++ "slice" of 55 ++. With the main battery on 80% charge the battery slice 8% load, I closed the lid and machine went to 'sleep '. I had not used for a few days and when I finally opened the cover, I found the power had been lost and the machine had to be started cold, losing my previous session.

  While a few days, the battery slice fell to 0%, and then the machine lost power. Never, he opted for the main battery, which was still about 80% of the fees. This is the expected behavior? It doesn't seem fair to me.

  Hi astecker,

  Sorry for the late reply. Since your last post, we have several updates. Grateful if you can try to update the list below and see if the problem persists, if the problem persists so that I can get a case goes with genius on this subject.

  BIOS: 1.39 here

  Power Manager: 3.64 here

  Power management: 1.64 here

  Slice battery firmware Update

  If the problem persists, please let me know, so I can connect one case to engineering.

  JMT

• X201i (3249 CTO): screen becomes a second when switching between battery, power supply

  So I had this problem since I put on the coming computer straight out of the box of Lenovo. Everything else works fine, but every time I'm leaving battery current alternative (or vice versa) the screen changes immediately brightness according to my settings and then turns off completely for 0.5 to 1 second before it is again and everything is back to normal. Happens EVERY time, so it is a permanent, 100% recreatable (and recurring) problem.

  I googled for a solution, but all I found is on updating drivers and uninstalling the software - which are not applicable on this machine. All the drivers are up to date and I have no installed software problems. Everyone knows what could be wrong or, more importantly, how to fix this?

  First I thought it was a problem of having a LED screen (I have experience only LCD screens), but it is not logical for me. I'd appreciate it really answers and suggestions for this annoying problem.

  FYI, I'm on a X201i (3249 CTO) with Win 7 home premium 64-bit.

  Super thank you!

  Note from Moderator: Edition subject to the content of the game.

  
  

• Y510P battery problem

  Hi all! My laptop Lenovo Y510P 2 day old has a problem with loading. I noticed that the battery was never more than 60% charged. I left that he plugged for more than 24 hours and nothing has changed. So I decided to completely drain the battery and used the laptop until it dies. With the laptop off I left that it plugged in until battery LED wired to white indicating the battery is fully charged.

  Unfortunately, the battery still shows 60% charged. What I'm missing here? I know that some smartphones must be calibrated etc but no idea of what to know mobile ha.

  Thanks for your help.

  Hey bro, I got the same problem with my y500 when he arrived, but its an easy fix. All you need to do is open the lenovo energy management program. It must have an icon in the taskbar of office. Go it to battery you settings and switch 'Optimized battery health' to 'Maximum autonomy' and that should do the trick!

• HP pavilion dm4: removing the battery / output switch problem

  MY hp dm4 Clubhouse has a switch relese battery does not move and so I can't remove the battery.

  What can I do to take out the battery?

  I was able to remove my battery, even if the trigger will not move

  I have read the documents under the next heading

  "Laptop battery seems to be stuck.

  He pointed out that my problem was very common

  BATTERY REMOVAL PROCEDURE

  As suggested-

  I inserted a piece of thin stiff plastic

  (for example on the size of a credit card but a little thinner)

  in the crack between the battery and the output switch

  I pushed the upper part of the plastic down

  and then I pushed up in the direction of the battery

  up until the crack of batttery widened to the point where I could use

  my nails in the battery of crack to pull the battery.

  I don't have to much force to make

  The angled battery to easily

  BATTERY INSERTION PROCEDURE

  As suggested-

  To avoid the problem of gel battery switch

  Move the latch of the battery in the middle of its sliding range

  When reinserting the battery first tilting the battery

  so that the side of the battery to the side of the computer case

  is first inserted into the battery compartment

  Then push down the other side of the battery in its compartment

  in the end, release the battery button while he spingngs to its normal resting position.

  I hope that this explanation is useful

• Remove a switch in the stack and put on another battery, it will work

  Hello!
  I have two different batteries, in two different place

  Location01
  STack01-> with dial-up dell PC8164-01 and 02-PC8164

  Location02
  STack02-> with dell switched PC8164-03 and 04-PC8164

  On all switches, I use the same ports for stacking

  Now, assume that this scenario:
  If the switch PC8164-02, which is a member of stack01 located in Location01 is damaged and I remove switch 04-PC8164 of location02 and connect to location01, it will be normally function and configuration of the reception of the other switch in battery PC8164-01, and he will be a Member?

  Kind regards!

  Yes, the switch will operate normally. When the switch is connected to the other battery it will see that there is already a main switch, since it has only 2 switches, it will become the cutout of backup, synchronization configuration and become an active member of the stack.

  You will need to ensure that all switches are on the same firmware.

• Battery to reboot a stand-alone switch

  Hello:

  I have a Cisco WS-C2960S-48TD-L with 12.2 (55) SE2.

  It is not a standalone switch, battery and with no order it restarts automatically looking for a new election of master. Logging I have nothing, but connected with the console cable, I see after 2 minutes do not show anything what follows:

  Waiting in the elections of the Stack Master...

  ...

  The switch restarts and:

  ...

  * 00:00:12.289 Mar 1: reading env - LICENSE_BOOT_LEVEL = variable

  * 00:00:12.949 Mar 1: % IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: name of the Module = restart level according to lanbase and License = lanbase = c2960s_lanbase

  * 00:02:02.342 Mar 1: % STACKMGR-4-SWITCH_ADDED: 1 switch has been ADDED to the battery

  * 00:02:03.674 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, state change downstairs

  * 00:02:04.686 Mar 1: % SPANTREE-5-EXTENDED_SYSID: extended SysId enabled for type vlan

  I have no battery-cable connected, because it s not going to be another switch on battery. The previous state of the default configuration of the stack is:

  SW_OSIATIS_SERVERS #sh pass in detail

  Switch/battery Mac address: b8be.bfcd.2b80

  Current H/W

  Switch # Mac address priority Version State role

  ----------------------------------------------------------

  * 1 master b8be.bfcd.2b80 1 1 ready

  Battery nearby Status port

  # 1 Port 2 Port 1 Port 2 Port switch

  --------------------------------------------------------

  1 against against none none

  After searching online, I have no seen anything to disable the functionality of the battery so I set the priority for the "switch 1" to 15 and set switches 2, 3 and 4, no provision, although this toggle Don t exist:

  #switch priority 1 SW_ACCESS (config) 15

  The priority of switch selector number 1 to 15

  Do you want to continue? [confirm]

  New priority has been correctly set

  SW_ACCESS (config) #no pass 2 supply

  SW_ACCESS (config) #no switch 3 available

  SW_ACCESS (config) #no switch 4 planned

  The State of the battery is the next right now:

  SW_OSIATIS_SERVERS #sh pass in detail

  Switch/battery Mac address: b8be.bfcd.2b80

  Current H/W

  Switch # Mac address priority Version State role

  ----------------------------------------------------------

  * 1 master b8be.bfcd.2b80 15 1 Ready

  Battery nearby Status port

  # 1 Port 2 Port 1 Port 2 Port switch

  --------------------------------------------------------

  1 against against none none

  With this new Setup, the switch has rebooted again.

  Why on a stand-alone switch stack is restarted my system?

  Is it a function to turn off the battery?

  Thanks in advance

  SW_ACCESS uptime is 35 minutes
  System returned to ROM by power-on

  Looks like his power.