Switch games

Similar Questions

• Cannot make connection IP cRIO more

  Short version: connection of Ethernet to my cRIO but suddenly become unstable, and I can't connect at all now.

  I'm working on the cRIO code for a client and try to work remotely. We had problems getting the deployed code to run (see http://forums.ni.com/t5/LabVIEW/Real-Time-Application-doesn-t-run-source-code-works-fine/m-p/3106679 for more information on this), but this seems to be a new problem, so I thought I would start a new thread to avoid confusion.

  It was impossible to troubleshoot remote, so I convinced the customer to ship the cRIO for me. Packaging is intact, the unit was well packed, so I'm skeptical that it has been damaged during transport, but something is happening.

  I started working with it using a direct connection cable between my laptop and the cRIO. All was well for about an hour; then things began to happen. The debug console (in the project window > Operate > Application Debug or Shared Library...) ('') was unable to find an executable file that can be debugged even if he had worked a few minutes before. I restarted the RIO through the project window (right click on the target > utilities > restart) and after a bit but I got a message "an error occurred while trying to restart the cRIO target. Power to bike. Tried to deploy the RT again, but he failed because the cRIO has failed.

  I tried all sorts of things over the next hours. MAX sees sometimes and sometimes does not. Even when he sees MAX, it tells me that there are no network adapters. Network properties and "ipconfig" sometimes show the port is connected and sometimes not. Ping Gets a response packet about 25% of the time, but the other 75% say "destination unreachable".

  I tried 4 different cables, crossover and the patch. I connected the laptop to another computer and ping 100 packets without problem, it isn't my port. I checked my IP address and the subnet. I have disabled the firewall. Power of many loading cycle. Starts the RIO in Mode safe. Switch used the 'IP Reset' but MAX can't connect long enough for me to give it an IP address on my subnet. Changed my IP port to a static address on the subnet 169.254.184.X (which is the subnet by default as it IP Reset puts on) but I have the same erratic connection. Forced half-duplex by http://digital.ni.com/public.nsf/websearch/FD24D98FF428F21686256B64007FB6C1). Reset the MAX database by http://digital.ni.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9?OpenDocument.

  Nothing works. If anything it gets worse. My guess is that the cRIO has a hardware fault in the IP port. The other port is disabled, and I can't connect long enough to enable it.

  I point out that I worked directly with the cRIO also uses this same computer during one week in February so all my drivers, etc. should be fine.

  Suggestions?

  There that weird looking messages sent on the port series with the DIP switches game console?

• Vector graphics, pixelation and puppet pins

  See the pictures below, look at the feet!

  Whenever I use the continuously rasterized option I still have problems. Maybe it's my workflow, but I you will often find that the layers appear to jump around, be broken almost as digital break on a TV or get cracks and lines at random. My problem at the moment is random lines.

  I have three compositions, a main and two pre comps. The first precomp contains 1 vector layer with rasterized switch game. The model of pre holding this model was then the rasterized spend together as a switch fx as Im using tools on the first duIK precomped layer. This layer/second precomp has a puppet PIN if it makes a difference to anyone. In this second precomp, I can see weird lines on my form, which are identical to the form, almost as if the 1st precomp is showing through for some reason any as an outline transparent 1pt?

  I can move the shape, and this strange contour remains in the same place but slices through my form that I pass, so in theory I can move my form across the composition and I have no problem... but it does not really solve the problem. My biggest final comp containing two comps above also has the same problem as the 2nd computer... but it's structure, I need so I had to test it.

  Currently my diapers are all 2d, but I can make them 3d later and meet more jumpy rasterising weird questions... When I change the rasterized or fx switches lines will go, but I need the rasterized option (although now I can not even tell if it's effective, but I also need the fx which holds my original puppet corner for duIK right tools)

  What I am doing wrong? Help, please!

  Photo 1 and 2, bot moved to the visible contours on feet, photo 3 has been moved far enough away from the original position of precomps shows so no lines. These come out on a record.

  

  Really, you cannot use the function of rasterize continuously with the puppet tool at the same time. This is explained in the puppet tool page in help. (And, if I remember correctly, it can suggest workaround).

  In anyway, if you do a precomp which includes the work and use the puppet pin on the precomp WITHOUT using the continuously rasterize button above, it should work fine. So, if you need it is larger, make more great before apply you the pins of the puppet.

• Help class object.

  Hello, even once, I need help.

  I have two classes,

  1.) Tile.as class - for a game tic tac toe, which creates the tile acutal for the grid

  2.) class Game.as - which implements and creates instances of the tile class puts on a grid, check the round, if there is a solution, and what to do with the solution.

  I attribute questions to each square of the grid as hollywood squares. If they get the question wrong the form of opposing teams will fill in the grid of the user has clicked. My problem is erratic behavior in establishing good shape in the squares of the Board. I put a switch box that goes through all marked forms, not what I want.

  In Tile.as

  Game.isClicked is the e.CurrentTarget in the game class.

  Game.isClicked.isSet is a string value that checks and ensures that the values are all the same inorder to solve.

  public void updateGraphic(e:Event) {}

  {Switch (Game.isClicked.isset)}

  case "X":

  tileO.visible = true;

  tileX.visible = false;

  Game.isClicked.isSet = 'F';

  Game.isClicked.isSet = "undefined";

  break;

  case "O":

  tileO.visible = false;

  tileX.visible = true;

  Game.isClicked.isSet = 'X '.

  trace ("O after update", Game.isClicked.name, Game.isClicked.isSet);

  Game.isClicked.isSet = "undefined";

  break;

  }

  }

  }

  In Game.as

  This code is placed on the 2 boxes called 'straight' or 'bad' called obj is e.currentTarget.name

  public static void checkMark(obj:Object)

  {

  Tile.activateMouse (questBox, Tile.questionEvent);

  switch (obj)

  {

  case "right":

  TweenMax.to(questBox.feedRight,.5,{autoAlpha:1});)

  break;

  case "bad":

  isClicked.dispatchEvent (new Event ("updateGfx"));

  TweenMax.to(questBox.feedWrong,.5,{autoAlpha:1});)

  break;

  }

  }

  When applied in this way, the two questions were answered one being the wrong answer, the two will always go through the case statement Tile.as and reset according to the conditions.

  Example: Form of Question 1 was false and all form O and Question 2 was false and the value of X. Once the condition called the O will have the value X in Question 1 Square and X will be settled on O Question 2 room.

  I hope this explains things a bit, and any help/ideas would be greatly appreciated. Thank you.

  Make sure you that understand the purpose of the 'static' keyword

  staticSpecifies that the variable, a constant, or method belongs to the class rather than to instances of the class

  the erratic behavior might have to do with the fact that you have access to the Tile.class instead of the Tile.instances.

  Just a guess, because the code you show is not enough to isolate the problem.

• How to quickly switch tabs? I play a game where it is important to quickly switch tabs.

  I play a game called the tribal wars. I need to switch between the 4 legs in less than a second. How can I do that.

  You can select the first 8 tabs by pressing Ctrl + 1 to Ctrl + 8 or Ctrl + PG. PREC and Ctrl + Page down.

  • https://support.Mozilla.com/kb/keyboard+shortcuts

• CNR error of command when installing game line switch

  original title: try to circumvent using NCRC command line switch error when installing game

  trying to load the game disc, go to about 66% and stops said to try to circumvent using the NCRC command line switch.

  that is - what, how do you want to get out there, he said not recommended, it is ok, please help, thanks

  Hello
  
  1. what game you are trying to install?
  2. is it compatible with windows 7?
  3 have you tried installing on any other computer?
  These error messages may also be due to corrupted computer files/virus. Here's how you can use the NCRC command line switch.
  a. click the Start button, type cmd. Result of research with right-click oncmd.exe and select run as administrator.
  b. type the path to the file to install this game and then leave a space and then type /ncrc.
  For example: c:\game folder\setup.exe /ncrc
  c. press ENTER.
  Please answer these questions and provide more information on the issue. This will help us assist you better.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How can I set up Vista so that the PC does not switch to another window (for example the Spy Sweeper alerts) while I am playing a game?

  How can I set up Vista so that the PC does not switch to another window (for example the Spy Sweeper alerts) while I am playing a game?

  Vista is not in control of this technique. Spy Sweeper needs to have an option to control that. If this isn't the case, then it is badly programmed. Flight of focus (go to another window) when it is actually needed is a big no-no for the design. I find this option, if I were you :)

• Adapter for games with switches

  I wonder if I use a games linksys adapter to connect my PS3 to wireless internet, if I can just drop a switch and hook my two HDDVR and PS3 to wireless internet? The adapter for games will be an IP address for the two devices are connected to the switch?

  You can connect a game adapter to one of the devices, the adapter for games will not pull an IP address for both the devices connected to the switch...

• Windows 7 SP1 w/IE 11 freezes, slow performance with switching webpages, downloads, games run very slowly and when to play simple games (for example, CandyCrush Saga) it ignores the graphics and music.

  I have an older Toshiba Satellite laptop I found that, after buying new laptops, I return to my only older because of its speed of travel from site to site, download and never had any problems with games.  I was running Windows 7 Home Edition, IE 9.

  About a year ago, I decided to upgrade my Windows 7 Home Edition to Windows 7 Professional and updated my browser IE 11.  Laptop still has a large.

  Then about 6 months ago I started to receive messages when you enter a Web site that I need to install Flash Player to view the page.  I checked my modules and Shockwave or Flash Player have been activated and would download it again to display the Web site (which I had already visited several times without any problems).  This has happened on several different sites.  Then I started to receive messages that I needed to upgrade my IE8 browser to a newer version.  I checked HELP to make sure that I still installed IE11 and I did it, I started getting these messages more often then I went to the aid of Microsoft Office on what to do if your Web pages telling you to upgrade.  Basically, IE11 is reset or uninstall IE11.  Reset is not good so I tried the method of reinstallment.  I uninstalled IE11, went to the download page for Microsoft IE11 and proceeds to download IE11.

  I saw a message that I couldn't download IE11 because I need to Windows 7 SP1 or later or Windows server 2008.  Then, I went to Microsoft requirements for the installation of Service Pack 1 for Windows 7 and follow-up procedures one (i.e., uninstall Adobe Acrobet, disabling Microsoft Security Essentials and Windows Defender and firewall, etc.) and after the installation of SP1 for Windows 7, followed all procedures to know what to do after the installation of SP1.  Downloaded all the updates (which were more than 120) restarted and was satisfied with fluent how my laptop worked once more.

  After a week, I noticed my phone to talk more and more to load pages and would begin to get Windows Explorer "unresponsive".  It started with almost everything I opened and I tried to edit Web pages or click icon to redirect me to another window, I kept receiving "not responding".  Rose (Microsoft), what to do and monitoring tools to try to fix the problem.  Initially, the problem was to find for a few hours, then starting upwards.  After a few days, my laptop almost took 30-45 seconds to switch between the tabs or windows.  After a search through questions and answers in the Microsoft community and Microsoft Web pages, the bottom line was reinstall Windows 7 SP1.

  Yet once, uninstalled and reinstalled Windows 7 SP1 and again ran perfect for a few days.  I turned on computer laptop yesterday and noticed that it took a long time for the upcoming Windows logo and has a black screen for a few seconds before the logo appears.  Of course, out of nowhere, I went to IE clicked icon and took forever to get to Yahoo (which is my predefined Web page).  Each page, I'm going to again is freezing, "not responding" and very slow operation.

  It is so frustrating because I added not all programs at all.  I am running IE11, Microsoft Security Essentials, and that's all. Outside of Windows Defender, firewall, Explorer, Media player, etc..  Microsoft Security Essentials (I did a full scan) has detected no viruses whatsoever and I 264 GB 285 GB free on my C: drive.  Therefore, there is no problem with the free space.  I have deleted the old files, temp files, analyzed and defragmented my hard drive and am just lost as to what is the cause.  All my drives are underway and have no conflict with all devices.  If I go down my Windows Professional so I will not be able to download anything higher than IE9.  I love IE11 and am happy with Win 7 SP1 if only he would stay longer than 3 or 4 working days.

  Do you have any suggestions?

  Hello Karen,

  Please run a scan with the following programs to see if your computer is infected by a piece of malware or a Trojan horse:

  https://www.Malwarebytes.org/

  http://www.bleepingcomputer.com/download/adwcleaner/

  http://www.bleepingcomputer.com/download/junkware-removal-tool/

  Malwarebytes will be produced a journal, please can post here the link to it? Navigate to: C:\ProgramData\Malwarebytes\Malwarebytes Anti-Malware\Logs and upload the logs to Ondrrive, which was the date of when you did the scan.

  For OneDrive help

  http://Windows.Microsoft.com/en-GB/Windows/Outlook/sharing-with-onedrive

  Start your computer in safe mode and see if your computer is always freezing.

  http://Windows.Microsoft.com/en-GB/Windows/Start-computer-safe-mode

  Ways to improve the performance of your PC.

  http://Windows.Microsoft.com/en-GB/Windows/improve-computers-performance

  Thank you.

• switch to another page of a site web game without my mouse clicking

  When using some web sites have several pages Firefox goes from page I am on another page in the history, when I click on any button of the original page.
  Like Expedia.com , I learned from the information on the flights, then when I clicked the button on this page from flight to hotel information firefox jumped back a page to request flight information page.
  On a game like bet365.com site if I'm on a page by looking at the sides for a special sportsman work and click the button on this page to place a bet that Firefox jumps to the last page of the story.
  That happen all the time and some sites are worse than others, like bet365.com. Sometimes I feel as if the pages are jumpting in all directions... Although they are not of course.

  Hello... I see the post above that great minds think alike. As suggested cor - el, I saw a suggestion elsewhere that people have had problems similar to mine which proved to be caused by an optical mouse. So, I swapped the mouse and wonder of wonders, it worked. All back to normal.
  Thanks a lot for your help, cor - el, is not only my problem is solved, but I have the advantage aside to have erased my machine of loads of other potentially dangerous junk.
  Once again... Thank you.

• Games on an M70-144 and the curious graphics switch

  Just I bought just a Satellite M70-144 today to replace my aging HP omnibook 500, but I have a few questions to you out there that already have this pc.
  1. my machine play modern games like doom3 battlefield 2...
  2. What is happening with the graphics card?
  I bought knowing it was a 128 MB ati x 700, I got an im from 256 MB ati x 700 complains not but just curious
  3. why the dvd quality is so bad?
  Thank you
  dyer313

  Hi dyer

  First of all, I think that you are a man of taste. I saw this camera a few days ago and it's nice peace of equipment. I like it a lot.

  1. it is most recent device of the M series with hardware configuration very good and I don't see any reason why you will not be able to play the latest pc games. Try it!
  2. According to the specification of this unit has graphics card ATI Mobility Radeon X 700 with the ability of the local cache of 256 MB
  3. Please be more specific about this. This unit has fantastic TruBrite screen, and I can't imagine that the quality of DVD can be bad.

  Good bye

• Game K430 with Turbo, auto, Cool switch machine.

  How will I know if this switch is working properly?

  rmose

  Windows 2008

  1 TB HARD DRIVE

  12 GB memory

  Hi rmose,

  The software is called power control switch and it is a propriertary for Lenovo K430 software. There are no links available for download again on the thelenovo support site yet, but as far as I KNOW, if you're running in Ultra Mode (red light), the system is already working in Ultra circles and you won't need the power control switch.

  Kind regards

  neokenchi

• I get a white screen on facebook games when switching to full screen mode in youtube videos

  When I go on facebook and play games like farville or cityville I would use mode full-screen, but every time I have try to go white I can here the sound but I have to type f11 to return to the normall screen mode so I can see. Can any one give me an easy solution, I'm using IE8 and I tried other browsers with the same result. I have windows xp with all updates of service they have my adobe is updated also and so is my java.

  Hi adamsioux1,

  · What is the number and the model of the computer?

  Try the methods and check the results below:

  Method 1:

  Try changing the screen resolution something like 1024 x 768, then check if the problem persists. You can check the link for the procedure below: to change your screen resolution: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

  Method 2:

  Install the drivers of the last update of the device screen and check the result.

  a. click on start

  b. click Run, in the Open box type devmgmt.msc

  c. find the display driver

  d. double-click the type of device

  e. right click on the device driver specific, you want to update or change.

  f. click on update driver to open the Hardware Update Wizard. Follow the instructions in the wizard

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Online game freeze during playback. Mother much memory card PT6Deluxe. The computer freeze, press stop switch. Clues

  freeze online game

  http://social.answers.Microsoft.com/forums/en-us/vistagaming/thread/e27a16eb-a8f3-4DDD-b4cc-726a1aac0c71
  Im having a similar problem... it can be linked to (intuition) network adapter drivers... see my walk I've linked to some t/s try

• Winner 8,1/firefox there are tabs above and below windows. In Win 10/firefox, there is now windows below for switching windows - how can you do that now?

  n Win 8.1/firefox it were the tabs above and below windows.
  Win 10/firefox, there is now NO windows below for switching windows.
  How to you switch windows (tab groups) now?
  Windows Firefox 39.03 10

  On the first program that I started after the launch 10 new windows, I can't do what I have been doing it for years and I can not understand.

  I hate the changes of major operating system.

  plugins installed

  • Adobe PDF plugin for Firefox and Netscape 15.8.20082
  • Garmin Communicator plugin 4.1.0.0
  • GEPlugin
  • Google update
  • HPDetect
  • Deploy Script NPRuntime plugin Library for Java (TM)
  • Next-generation Java plug-in 11.40.2 for Mozilla browsers
  • Plugin to detect Nero Kwik Media.
  • Nitro PDF plugin for Firefox and Chrome
  • Shockwave Flash 18.0 r0
  • VLC Web Plugin 2.1.3 media player
  • Detector of presence of WildTangent Games App V2
  • NPWLPG

  Is the problem that the Windows task bar is hidden by the Firefox window, or that changes to the taskbar make it impossible to change the windows?

  If the taskbar are hidden by Firefox, it is possible that Firefox is in full screen mode. The F11 key toggles between full screen and normal views.

  Another potential problem is that Firefox sometimes seems to collect data of erroneous screen size of the operating system and that the window of Firefox too large. You can rename the relevant settings file to see if that helps.

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  To restore the missing bars, you can use one of the following methods to view the list of the toolbar, and then select the desired bars it:

  • Right click on a place empty on the tab bar (or the button '+')
  • Press the Alt key to activate the classic menu bar > view > toolbars
  • in customize mode > show/hide toolbars (see: Customize Firefox commands, buttons, and toolbars)

  To activate the menu bar, toolbar bookmarks or other bars, click it in the list.