Switching between ESX and ESXi

Similar Questions

• Differences between ESX and ESXi

  Hai,

  As I am new to VI environment I doubt that where features ESX and ESXi are different, it may be stupid but can help me a lot.

  Hello

  Please check the link to the differences between ESX and ESXi below.

  http://www.VMware.com/products/vSphere/ESXi-and-ESX/compare.html

  Please note ESX is present in version 3.x, 4.x. starting vsphere 5.0, we have only ESXi.

  ESXi doesnot have a service console and has the smallest footprint of 70 MB and so is safer and more reliable, because it has a smaller surface set.

  Please allow points if you find the article useful.

  Thank you

  Aakash Jacob

• store of data sharing between ESX and ESXi?

  Hello everyone

  This is something I have not yet tried, but is it possible to share the same store of data between ESX and ESXi (version 4)?

  /MH

  Without a doubt.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• Difference between ESX and ESXi in production?

  Hello

  I was asked to meet my client from my manager what difference does it make if I used ESX or ESXi in our world of production.

  Except I can't think of a logical reason to use on ESX ESXi... Any ideas please?

  Thanks in advance!

  PS - I know the basic difference between these two have read a few articles, but nothing gives me a practical reason to choose ESXi.

  Since reliese the Service Console on ESX - which is based on RHEL - the reason that VMware moves to only ESXi is it eliminates the need to patch the Service Console and makes it more secure host.

• difference between ESX and ESXi

  I would like to know the difference between ESXi and ESX with regard to the granting of licences and ease of management with vCenter. Are there features that are not available in ESXi, but available in ESX. Why VMware introduce ESXi free?

  This request may have been addressed above, can someone point me to the thread?

  to add to what David said, you might want to watch this so KB

  http://KB.VMware.com/kb/1006543

• ESX and ESXi

  What are the fundamental differences between ESX and ESXi. Someone could it say please interview point of view. Just need about 4 to 5 differences.

  Thank you

  Prashant

  The difference between ESX and ESXi, ESX was the classic version with a dedicated Service console embarked with him, however, ESXi is the version of Vsphere without the Console service. Because ESXi is without the service console, so its size is very small and its called summer have footprint small disc. With the release of VSphere VMware 5.0 and later versions has deprecated the classic ESX version there is therefore no now unavailable ESX and we only ESXi now.

• DRS cluster: You can mix 4.1 ESX and ESXi 4.1?

  Not very complext, but we have a DRS cluster of 8 hosts x 3850 of IBM on ESX 4.1 and we will upgrade them both to ESXi 4.1 update 1.  There will be questions mixing a cluster of ESX and ESXi servers?

  Yes, 100% supported!  both are the same hypervisor, so you should have no problem running in the same cluster.  After all it is the best way to do a upgrade spread, and how we made our move between ESX and ESXi.

• Store of data sharing between 4 ESX and ESXi 5

  Hello

  I have a vSphere environment 4.1 with a vCenter and a cluster of 3 ESX 4.1 access to the content of data through fiberchanel (type scneario) warehouses.

  And now I need to install a new ESXi 5.x (cannot be a different version) in a separate environment, outside of the current vCenter, BUT to access the warehouses of data even as the cluster of vSphere 4 current.

  Anyone know if there should be no problem sharing between 4 ESX and ESXi 5 access to the same data storage?

  Thanks in advance

  As long as the FC zoning is configured properly, avoid all the problems.   ESXi 5 will be able to see the data created by ESX4 VMFS3 stores, it will not be able to create the same size of virtual machine he can on a 5 VMFS datastore.

• Switch from ESX to ESXi 4.1 U1 4.1?

  Is this doable or do I have to do a clean install?

  There is no upgrade path between classic ESX and ESXi.  Thus, a clean install is your only option.

• Display satellite C50-A546 cards how to switch between NVIDIA and INTEL?

  Hello

  How can I switch between NVIDIA and INTEL graphics cards?

  PS
  I have already installed all the drivers, but I can see that INTEL the card used chart!

  * OS: Windows 8.1 x 64
  * NVIDIA driver: 340, 52-portable
  * DirectX: 11

  Hello

  The Intel graphics chip, which is part of the central unit should be used for low performance applications, because it allows you to save energy and reduce the internal temperature.

  For best performance while game, it s advisable to use the external GPU (nVidia or AMD)
  This setting can be changed in the nVidia control panel s

  Here, you should choose manage them 3D settings (can be found on the left in the nVidia control panel)

  Now in the main window, you will find two global settings and program parameters tabs
  In the program settings tab, select the (game) program that needs to use the nVIdia GPU

  If it is not listed, click the Add button
  Then choose the graphic processor preferred for this program (generally must be nVidia processor high performance)

  Last but no less, in this program-specific settings, you can assign additional features to improve performance.

• Switching between microphone and line-in in the Realltek Sound Manager

  Ok.
  Now I know where the Realtek Sound Manager, and I can control the parameters of the microphone and speakers.
  But how can I switch between microphone and line-in?
  At the moment I don't see a line of component option snap at all. Is it because it's a kind of auto detect and the opportunity every time I connect something?
  Everyone knows this, or has some experience in this regard?
  Cordially in advance
  Frans

  Sorry but I don't understand what exactly you want.
  You have built in mic or you can use the external microphone connected to the mic-in port.
  When the external microphone is connected a resident will be disabled.

  The question is: what do you want exactly and for what purposes? Please explain what is the reason for this switching between mic and line-in port?

• Equium L10-273 kept switching between battery and power

  Hello

  I saw a similar post here and I was wondering if anyone could tell me if they have had this problem sorted? My Equium L10-273 kept switching between battery and power all others second, which made it impossible to type, it's got worse and worse. I thought it was a problem with the power supply, but when I removed the battery from the laptop is ok running of the adapter.

  He kept also make a noise of hissing/crackling growing fan region, which stopped when I removed the AC adapter. The adapter was unusually hot, and the fan area became too hot to the touch. This stopped now, I removed the battery, so I want to know is what someone has solved this problem by replacing the battery or it should be returned?

  This laptop is less than 2 years old, but apart from his one year warranty.

  Hello

  According to the description of your problem, I think there is a problem of electronic power supply. Sorry but there is not a universal solution, and I recommend you contact the service authorized in your country. Explain the situation and see what they say.

• It takes up to 4 minutes for the player switch between library and Rip, and vice versa.

  I run Media Player 11 on my XP machine with spare 120G on the C: memory and 3G - recently, it takes up to 4 minutes for the player switch between library and Rip, and vice versa. I have re-installed twice but no change. No new software has been installed before this time.

  Hello Absno69,

  Thank you for your message.  You mentioned that there were no new software installed before that happens.  Were there any hardware changes or updates?  If this isn't the case, we will perform a system restore to a point that you know that your system is working effectively.  Click HERE for the system restore instructions.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I want to restore switch between windows and display the desktop icon

  a few days before these two icons was actually on the task bar and now I have deleted how restore it back
  (switch between windows and display the desktop icon)

  Hello

  Copy the new:

  C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

  To your user account to:

  C:\Users\launch of \AppData\Roaming\Microsoft\Internet Explorer\Quick

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• (Vista) Is there a PRACTICE way to switch between speakers and analog headset?

  (Vista) Is there a PRACTICE way to switch between speakers and analog headset? Must I ALWAYS return the default setting, depending on which audio output device I want to use?

  We have recently installed Music Maker 16.  Before that, we never had a need for headphones and a microphone.  Now, in trying to use the headphone and microphone - and THEN switch back to speakers - we discover a problem.  Apparently, the only way to do it is to change the audio output device by default EVERY time.

  The dispute with this cannot be more of this.  My son records a beat and singing (with headphone and microphone), and then, play through speakers (so we can all hear), we need to change the default settings.  And back...  There must be a better way!

  Any help would be greatly appreciated.  Please talk layman jargon; I'm not a COMPUTER guru.  Thank you!!!

  Hi AnnieElle,

  You will need to switch between the speakers and the analog device and special value to use as the default device. There is no way to set the device to be used at the same time. You can follow the steps below to switch between the speaker and analog device.

  1. right click on the speaker icon in the taskbar.

  2. click on the playback device.

  3. Select speakers or analog device.

  4. right-click on it and click on set as default device.

  Hope the above information helps.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.