Switching machine

Similar Questions

• Game K430 with Turbo, auto, Cool switch machine.

  How will I know if this switch is working properly?

  rmose

  Windows 2008

  1 TB HARD DRIVE

  12 GB memory

  Hi rmose,

  The software is called power control switch and it is a propriertary for Lenovo K430 software. There are no links available for download again on the thelenovo support site yet, but as far as I KNOW, if you're running in Ultra Mode (red light), the system is already working in Ultra circles and you won't need the power control switch.

  Kind regards

  neokenchi

• Need 16 to 115 200 serial ports, can not get more 8 then

  I try to get 16 to 115 200 serial ports send/receive data. I have a NI PCIe-8431/16 (RS-485/422).

  I managed to get 8 ports will at the same time but not anymore. I tried 9 ports at a time and I get timeouts on port 9.

  PC: Dual core 2.4 GHz, 4 GB of Ram. I'm not more taxing on the CPU, I mean its 115 200 what treatment he would need.

  I'm already talking with OR to the care, but so far they don't have a definitive answer of fix. I thought that maybe windows XP can handle 8 ports?

  I also tried to use 8 of 16 channels and 1 another card 4 ports, I've had. Always the same results. I can do 8 simultaneous connections, sending data. and it seems that I can get the 9th to send to 2400 baud, but when I switch to port to 115 200 speed it fails / timesout?

  More information about my project: I am trying to update firmware on 16 devices at once. To 115 200, it takes 6 minutes to push all the code of the device.

  Process is: 2400 baud get version and check if a new version is necessary. 2400 baud say im switching machine for 115 200 2400 baud response. 115 200 baud send start download receive response to 115 200 baud rate. Send the bytes start and spell then line of the file at a time. Send end. done bytes.

  Anyone know of possible limitations under XP or with the device OR? Any help or idea would be apreciated.

  worst case I limit to 8 at a time. which is useless then. Might as well buy a controller at 8 ports and make a smaller device...

  Well, I fixed my problem with the help of using NI SPY on serial ports. Thanks for this idea of troubleshooting, first time I had to use or spy.

  First problem was my 100msec device timeout of 2400 baud to 115200 baud of switching. I added a loop for, 5 time, delays from 20msec (total 100msec) to send 'start download' and also to receive a response, after the transmission change. This allowed the unit to wait for firmware.

  Then I noticed that I had a ton of failure during the download. Process is send receive some line of code 0 x 01 that the code was excluded, then send the following line of code. If she gets 0 x 01 has not received or 0x02, and then send it again (forever if you want, well I think that several seconds until the device stops data receiver)

  My problem here is that I sent the data line, then read 1 byte. Timeout is set to 500msec. My code would get a timeout, so I'll send the data once again, since I have not received of 0x01. For some reason, it does not. After that I get the timeout I can't send/recieve on this port. I have then close and restart.

  Fix was a loop (20 times?) for 500 msec and check the receive buffer. If the receive buffer is empty after 500msec I try again. If the receive buffer has data then I read and check to 0x01. If I don't get 0x01 I try again. Otherwise, send the following line of code. It works very well.

  Finally, I can picture 16 devices in less than 7 minutes. This should normally be one at a time for 7 minutes each using a matrix of series 48.

  Next challenge 48 serial ports!

  Thanks for the help.

• OfficeJet 6500 wireless has stopped printing black

  Printer stopped printing black.

  Installed new ink cartridge

  cleaned print heads

  aligned printheads

  switch machine

  CYA colors fine print

  the printer is out of warranty - about 1 1/2 years.

  Windows 7 64 bit

  almost ready to Chuck it by the window

  Thanks for the info.

  I tried the thing to wash and dry a couple of times.

  He has not worked for me.

  I had already ordered a new Printhead and installed yesterday.  But it didn't work after aligning the print head process either.

  I have tried resetting by unplugging the printer and hold the # and 3 buttons on the keyboard.  He rolled and then he started printing in black ink.  Yay!

  I don't know if the old print head would have worked if I had tried the # and 3 button Reset the process, but I'll keep the old one just in case where (after I wash again).

  Just happy to have a machine working again.  Testing time to go buy more ink after you run most of the color cartridges down with reset and alignment.

• Signature of the exhausted code record attempts?

  I just installed the new 4.5 component package, as well as a few old packages of OS and d. After that, my Signature tool, which has always worked well with 4.3, is now showing as being not registered. When I try to record again, I get the following error:

  "Impossible to sign up the customer"customer name"because they have exhausted their registration tent.

  I have since uninstalled the JDE 4.5 and performed a repair on the JDE 4.3 installation, but did no good. Where is this stored information for registration, and is it possible to restore it? What should I do to fix this? I shot a message to [email protected], but I have yet to hear back from them.

  Any help would be appreciated.

  The 3 files you need to copy are in the directory ""/ bin ".

  sigtool. CSK

  sigtool.DB

  sigtool. Set

  I transferred around because I switched machines and JDE versions, and it worked every time.

• Adobe Muse and creative cloud help please.

  I'm having a terrible time using the files. Trying to understand this so much time. During the day I work on my website in adobe muse and save on creative cloud on my MacBook pro, in the night, I use a PC at home, I open the Clloud Creative files and all images etc. have warnings of re - link everything. Next day on PC I do same and same thing. I have files of site (all properties) stored on a hard drive of removebale, on Mac and PC and CC.  Please help me with a surefire way to get it, I think it's the problem of the root or folder? I tried saving funds of all files on both platforms as well and the same thing. I just works perfectly on my PC and Mac site. Finally, CC stores only assets only? Cause I re-paired everything creative cloud too and everything went wrong on the other computer. I thought that the CC would not spoil the files between platforms.  IM confuzzled BaAaAd Yes

  Hi Backlot,

  You will be able to use and edit your Muse file, even if you don't re - not link assets.

  It's just that you won't be able to change these assets, so you can redo the link assets whenever you need to make changes to the active files.

  Every time you switch machines, please save the latest version of your Muse file on a local disk and then use it. Using a .muse file saved on a cloud, or removable hard drive can cause problems.

  Also, I suggest you save a copy of all the files of components in a single folder (a local location, not the cloud or the removable hard drive); so, when Muse invite you to re - link assets, you can add a link to one of these files, and Muse will look in that folder for all your other missing links.

  Concerning

  Sonam

• Reissue of active links between desktop and laptop

  Hello

  Is it possible to not have to re-edit the active link every time I spend between my desktop and my laptop when you work with the Muse? I have all my files in the cloud to Adobe, and every time I save and sync to my desktop, then open the files in Web site while traveling on my laptop, I have to spend a bit of time going back through and restoring links everything that I had done on my desktop. Files are taken from the same spot and registered to the same place (the cloud), so I don't know why I have to go back through and connect it all that I had just created when switching between desktop and laptop.

  Thanks for any help/input on this, I really appreciate it.

  Hi Davz,

  You will be able to use and edit your Muse file, even if you don't re - not link assets.

  It's just that you won't be able to change these assets, so you can redo the link assets whenever you need to make changes to the active files.

  Every time you switch machines, please save the latest version of your Muse file on a local disk and then use it. Using a .muse file saved on a cloud, or removable hard drive can cause problems.

  Also, I suggest you save a copy of all the files of components in a single folder (a local location, not the cloud or the removable hard drive); so, when Muse invite you to re - link assets, you can add a link to one of these files, and Muse will look in that folder for all your other missing links.

  Concerning

  Sonam

• Illustrator script will not print on the correct printer.

  I call an Illustrator using BridgeTalk script within a script InDesign, but I doubt it would make a difference.  Here's the question: we have four printers on the network that are named 'Printer 1', ' printer 2 "," printer 3 ", and"printer 4"on each Mac on the network." "  I want to print a document to a specific printer, based on the computer that is used to run the script.  Pretty simple idea and I have illustrated it in my script in progress below:

  function illustratorDie(artFile, dieFolder, companyName, orderNum, shipDate, dieInks)
  { 
            // Before anything else, find out to which printer we'll be sending our document.
            var machine = $.getenv("USER");
            $.writeln("(IL) Environment variable 'USER' is " + machine);
            var localPrinter;
            var shipPrinter;
            switch (machine)
            {
                      case "aerostar":
                                $.writeln("Machine is aerostar.");
                                localPrinter = "Printer 4";
                                shipPrinter = "Shipping";
                                break;
                      case "apache":
                                $.writeln("Machine is apache.");
                                localPrinter = "Printer 3";
                                shipPrinter = "Shipping";
                                break;
                      case "navajo":
                                $.writeln("Machine is navajo.");
                                localPrinter = "Printer 3";
                                shipPrinter = "Shipping";
                                break;
                      case "seneca":
                                $.writeln("Machine is seneca.");
                                localPrinter = "Printer 2";
                                shipPrinter = "Shipping";
                                break;
                      case "warrior":
                                $.writeln("Machine is warrior.");
                                localPrinter = "Printer 2";
                                shipPrinter = "Shipping";
                                break;
                      case "tomahawk":
                                $.writeln("Machine is tomahawk.");
                                localPrinter = "Printer 1";
                                shipPrinter = "Shipping";
                                break;
                      case "Marketing":
                                $.writeln("Machine is Marketing.");
                                localPrinter = "Printer 1";
                                shipPrinter = "Shipping";
                                break;
                      default:
                                $.writeln("Machine has defaulted.");
                                localPrinter = "Printer 3";
                                shipPrinter = "Shipping";
            }
            $.writeln("(IL) Thus, the local printer is " + localPrinter);
  
  
            // First, create a new document for the die.
            var dieDoc = app.documents.add();
  
  
            // Then open the document that contains the artwork.
            var artDoc = app.open(artFile);
  
  
            // Group the art from the document with the artwork,
            // just in case it hasn't already been grouped.
            artDoc.layers[1].locked = true;
            artDoc.selectObjectsOnActiveArtboard();
            var sel = artDoc.selection;
            var newGroup = artDoc.groupItems.add();
            newGroup.name = "ArtGroup";
            newGroup.move(artDoc, ElementPlacement.PLACEATEND);
            for (var i = 0; i < sel.length; i++)
            {
                      sel[i].moveToEnd(newGroup);
            }
  
  
            // And copy the artwork from the art document to this new die document.
            var copiedArt = newGroup.duplicate(dieDoc.layers[0],ElementPlacement.PLACEATEND);
  
  
            // Now we can close the art document as it will no longer be needed.
            artDoc.close(SaveOptions.DONOTSAVECHANGES);
  
  
            // Back to our die document, let's fix up the art now.
            // We do so by first centering it on the page.
            copiedArt.left = ((dieDoc.width - copiedArt.width) / 2);
            copiedArt.top = (dieDoc.height + copiedArt.height) / 2;
  
  
            // Then we change all paths to black & white.
            // For this, we will assume that there are no gradients nor raster art.
            var pathsToRemove = new Array;
            var blackColor = new CMYKColor();
            blackColor.cyan = 0;
            blackColor.magenta = 0;
            blackColor.yellow = 0;
            blackColor.black = 100;
  
  
            convertBW(copiedArt);
  
  
            $.writeln("Removable paths: " + pathsToRemove.length);
            for (var v = 0; v < pathsToRemove.length; v++)
            {
                      pathsToRemove[v].remove();
            }
  
  
            // Now specify the contents of that text block.
            var newLine = String.fromCharCode(13);
            var textContents = companyName + newLine;
            textContents += orderNum + newLine;
            textContents += shipDate + newLine;
            textContents += newLine;
            textContents += "W: " + Math.round((copiedArt.width / 72) * 100) / 100 + newLine;
            textContents += "H: " + Math.round((copiedArt.height / 72) * 100) / 100;
  
  
            // And finally actually place the text block while formatting it.
            var textDesc = dieDoc.textFrames.add();
            textDesc.position = [36, dieDoc.height - 50];
            textDesc.contents = textContents;
            textDesc.textRange.characterAttributes.size = 36;
  
  
            // Let's set print options for the two printers.
            var localPrintOptions = new PrintOptions();
            localPrintOptions.printerName = localPrinter;
            var shipPrintOptions = new PrintOptions();
            shipPrintOptions.printerName = shipPrinter;
  
  
            var myJobOptions = new PrintJobOptions();
            myJobOptions.copies = 1;
            shipPrintOptions.jobOptions = localPrintOptions.jobOptions = myJobOptions;
  
  
            $.writeln("Printing to " + localPrintOptions.printerName);
  
  
            // Now we need to print this text block to the local printer as well as the Shipping printer.
            $.sleep(2000);
            dieDoc.print(localPrintOptions);
            $.sleep(2000);
            dieDoc.print(shipPrintOptions);
  
  
            // Before saving the file to an .EPS, we need to hide (or delete) the text block.
            textDesc.remove();
  
  
            // Lastly, we need to save this document as an .EPS file in the proper location.
            // Set the SaveOptions first, just like the PrintOptions earlier.
            var dieOptions = new EPSSaveOptions
            {
                      compatibility = Compatibility.ILLUSTRATOR16;
                      preview = EPSPreview.TRANSPARENTCOLORTIFF;
                      embedAllFonts = true;
                      cmykPostScript = true;
                      postScript = EPSPostScriptLevelEnum.LEVEL2;
            }
  
  
            // And then actually save the document.
            var savedFile = unescape(dieFolder.toString()) + "/" + artFile.name.slice(0,-4) + "_Die.eps";
            $.writeln("Inside Illustrator script, savedFile is " + savedFile);
            dieDoc.saveAs(File(savedFile), dieOptions);
  
  
            // Finally, close the document.
            dieDoc.close();
            return savedFile;
  
  
            // END OF MAIN.
  
          function blackIt (currentItem)
          {
            ...
           }
  }
  

  I at first thought that the script was running too fast, so I added the two "$.sleep (2000)" orders near the end to see if it would help - it didn't.

  The bits of important, after defining the variables localPrinter and shipPrinter, come after the line / / Let's define the printing options for both printers.

  Instead of print to the local printer, sometimes it will print to the other.  For example, I am the machine called "apache".  The script must localPrinter on "Printer 3".  And, according to the statement of $. writeln() , he does.  However, despite this setting, almost always displays "Printer 2"!  From time to time he actually does it print "Printer 3".

  This happens on other systems, too.  It almost seems as if it prints to a printer that is numerically the one less than that to which it is supposed to print.  "aerostar" prints often to "3", "warrior" often it prints for "printer 1", and then the 'marketing' impressions, we do not yet all printers output a page!

  What is the cause to happen and, more importantly, what can I do about it?  Help, please!

  Of course, I get another set of printers listed.  Nevertheless, I found a solution for this.  Since it seems that the printerName of PrintOptions property is buggy, I decided to try the printPreset property instead.  I created of the presets on each computer, one for each printer and the accordingly modified script.  Works like a charm now.  Now the switch statement:

  switch (machine)
  {
            case "aerostar":
                      $.writeln("Machine is aerostar.");
                      localPrinter = "Printer 4";
                      localPrintPreset = "Color Proof Printer 4";
                      shipPrinter = "Shipping";
                      break;
            case "apache":
                      $.writeln("Machine is apache.");
                      localPrinter = "Printer 3";
                      localPrintPreset = "Color Proof Printer 3";
                      shipPrinter = "Shipping";
                      break;
            case "navajo":
                      $.writeln("Machine is navajo.");
                      localPrinter = "Printer 3";
                      localPrintPreset = "Color Proof Printer 3";
                      shipPrinter = "Shipping";
                      break;
            case "seneca":
                      $.writeln("Machine is seneca.");
                      localPrinter = "Printer 2";
                      localPrintPreset = "Color Proof Printer 2";
                      shipPrinter = "Shipping";
                      break;
            case "warrior":
                      $.writeln("Machine is warrior.");
                      localPrinter = "Printer 2";
                      localPrintPreset = "Color Proof Printer 2";
                      shipPrinter = "Shipping";
                      break;
            case "tomahawk":
                      $.writeln("Machine is tomahawk.");
                      localPrinter = "Printer 1";
                      localPrintPreset = "Color Proof Printer 1";
                      shipPrinter = "Shipping";
                      break;
            case "Marketing":
                      $.writeln("Machine is Marketing.");
                      localPrinter = "Printer 1";
                      localPrintPreset = "Color Proof Printer 1";
                      shipPrinter = "Shipping";
                      break;
            default:
                      $.writeln("Machine has defaulted.");
                      localPrinter = "Printer 3";
                      localPrintPreset = "Color Proof Printer 3";
                      shipPrinter = "Shipping";
  }
  

  and the transfer block that accompanies it, which uses the new variable:

  // Let's set print options for the two printers.
  var localPrintOptions = new PrintOptions();
  localPrintOptions.printPreset = localPrintPreset;
  var shipPrintOptions = new PrintOptions();
  shipPrintOptions.printerName = shipPrinter;
  

  I hope this will help someone else who is faced with this problem!

• Performance on DS3300

  Hello.

  I have an IBM DS3300 iSCSI with two controllers, 512 MB cache, 12x450GB SAS15k disks, 3 raid 5 arrays with two LUNS each on 627 GB.

  DS3300 in a switch of 1 GB, frames and flow off - windows xp in the switch machine, ms iscsi initiator and passmark performance tool to test the performance of the disks said 96 read and write of 54 MB.

  Then I started an ESX 3.5 server up to, where I place a virtual server 2003 in one of the LUNS, tried on the INSIDE of the Server 2003 with the same program, and then I always get 96 read speed, but only 23 MB write speed.

  Cache on the controller is activated.

  Anyone have ideas for casus wicj almost half of the performance inside the virtual machine?

  > have someone at - it ideas for casus wicj half of the performance inside the virtual machine?

  Don't forget the golden rule for all virtual machines, they ALL share the same bottom of basket.  1 VM or 50 backplane is virtualized, the controllers are software controlled, none of the virtual machine have direct access to the disk controller, memory or network card.

  So IO is virtualized AND part cutting the time and subject of the fantasy of the hypervisor.  That's why VM do not get the same speed.  Host ESX even slowed down, with 1 virtual machine works as fast as the speed of native hardware, no virtualization for this product... but ESX is better, as long as you use the configured machines correct on the supported hardware... If half of the sounds all right... even if it is also subject to the BONE inside the VM so... so there are always imponderables.

  No settings but cannot really improve or radically change this number... It is what it is...

• Anyone using DropBox for LRCAT file?

  It seems that when I use my cell phone to add keywords to LRCAT, I found a copy in a conflict in my dropbox folder...

  Is it possible to reconcile or combine the ordinary lrcat and that conflict? Or do I just start using that in conflict?

  I know it all has something to do with the expectation of all download files on DropBox, and usually, I don't have a problem since the 2 machines are rarely used at the time... but sometimes I need to stop quickly or maybe I missed part of the transfer, so I'm really just checking to see if there is a way to reconcile and when I blow it.

  Thank you

  Tom

  I use Dropbox to my personal catalog.  The key is to make sure that it's finished completely download and download before switching machines, otherwise you end up with catalogs in conflict, as you found it.

  There are ways to merge the catalogs (export catalog then import the catalog) or just the most recent gathering (one copy of delete and rename the conflict) but they really create a lot of extra work, so I would strongly recommend to avoid this situation.

  Also just keep in mind that it is not officially supported by Adobe, in order to keep regular backups of catalog.

• Number of user PDF.

  Adobe reader opens a file and it ends in 3-5 seconds.

  The other problem is that this happens only on 1 of the 2 user accounts.

  A. being a former account with lots of information and (B) that with the rites of the admin.

  I tried switching machines and connecting the user and works very good drive but the newspaper on the old machine and Taylor is.

  can anyone help?

  Interesting; something seems to be corrupted.  Maybe there's a chance that the permit can be obtained using SubInACL.

  Download and install SubInACL http://www.microsoft.com/en-us/download/details.aspx?id=23510

  Download and unzip the attached permissions.bat in C:\Program Files\Windows Resource Kits\Tools (or C:\Program Files (x 86) \Windows Resource Kits\Tools on a 64-bit system).  Double-click it to run it.

  I suggest that you create a System Restore Point before proceeding with the above.

  Attached, it is also a reg file that will add the value of Mode protected in this key "reg".

• Inspiron 545 desktop on/off button does not

  Hey friends,

  Went to start my Inspiron 545 this morning and zilch zero action on the button does not illuminate nothing.

  Fans of seeing work orange on the main map on green led light near the power cord.

  would this be a case of just a new switch? IIs there anything else I could try and see if she could turn.

  Would really appreciate your help.  Soon Jimmy

  Hi Ron,

  Take off unplugged bezel wire switch switch a small rear wire handed tightened loose switch machine good news. Thanks for your help guys

• I am on a MacBook Pro mid 2012, Yeosmite 10.10.5, I want to switch to Sierra and am nervous to do when I had a terrible experience upgrade to Yosemite.  I have everything backed up on Time Machine. Can you please advise me?

  I am on a MacBook Pro mid 2012, Yeosmite 10.10.5, I want to switch to Sierra and am nervous to do when I had a terrible experience upgrade to Yosemite, support with gratitude by Apple in charge.  I have everything backed up on Time Machine. Are there steps of preparation I need to do before you download and upgrade to Sierra.  Can you please advise me please?

  N ° so you have a backup if something goes wrong you can return to Yosemite.

  Only concern is that some devices, including USB that may require the updated drivers, but these records are not always available

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Cannot switch between multiple Time Machine backups

  I generally save my 2010 Macbook Pro to a 2012 Time Capsule, which is attached to my router via an ethernet cable (most recent) wireless. On a trip, I make the additional backups on an external hard drive. However, when I go home and try to return to the TC, my internal HD is now on the time Machine "Exclude" list and cannot be removed (greyed out). When I try to save, I get a message saying "no disks are available to back up."

  What has happened a few times, and the only solution I could find was to delete my original Time Machine backup and put a new (which took forever).

  Any ideas why my HD internal is added to the exclusion list after using Time Machine with an external hard drive?

  Time Machine backups on a network drive or a disc attached locally stored in different formats. Switching between them was not in the overall theme of the design of this service of OS X.

  I suggest that you set up Time Machine to use multiple disks.

  FWIW, in my case, I backup destinations, Time Machine on a Time Capsule and an external hard drive of 2 bolt of lightning. When both are available, the time goes 'take turns' Machine backup on each drive.

  If a disk is not available, it backs up to that which is, and which ignores the backup of the other. When the two are connected again, backups continue on both.

• My Time Machine is full. Should I keep it plugged in and turned on even if I switch to another external hard drive for Time Machine backups?

  My external hard drive, Time Machine is full. Should I keep plugged in m and, even if I switch to another external hard drive to keep backups with TimeMachine?

  There is no need to keep two connected external drives. Instead, I suggest you to buy a bigger external hard drive and transfer the backups that you want from the old to the new external drive, so you can use the old external drive for other purposes-> Time Machine: how to transfer backups from a current backup disk to a new backup drive - Apple Support