SWR10 strange walk and sleep readings

Similar Questions

• Paused long and sleep don't work on Windows 7 Home Premium

  A few weeks ago the Hibernate and sleep functions stopped working on my SONY VAIO laptop.  By that I mean, I can click on functions and it seems to work fine, BUT a minute later he wakes up.  I disabled hibernates and then helped him, but this does not solve the problem.  Then one week there is exactly the same thing started to happen on my Lenovo desktop all-in-one computer.

  I never had this problem on any of my computer before, is more strange would happen on two computers in a few weeks apart.  It makes me think that a recent Windows Update may have caused the problem.

  Yet once, put in hibernation until sleep only works for a minute, and then he wakes up again.  I am convinced that it is NOT caused by a former pilot or a device that wakes the computer since we are talking about two distinct and unique computers that do not share anything other than a printer.

  Thoughts or ideas to solve this problem is greatly appreciated. Thank you.

  Hello Brad,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. have you made changes to your computer hardware?
  2. What is the model number of your laptop?

  I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run Troubleshooter of power and control.
  Reference:
  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft Knowledge base article and check the issue.
  Reference:
  Windows 7 is not going to sleep
  http://support.Microsoft.com/kb/976877

  Method 3:

  You can also create a new power plan and check.
  See this link:
  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme
   
  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Outdoor walk and exercise ring

  So I took two walks 15 minutes around the campus to work.  I had my phone twice, so he knows that the distance was 0.7 miles each time.  Yet, I only managed 17 minutes of exercise.  How do I determine what counts exercise walking and what does not work?

  Hello

  For general daily use or for training registered through the application of the session training, for the progress of exercise either credited, your activity must be at least equivalent in intensity to a brisk walk.

  You will receive one minute the credit of the exercise for each minute during which this condition is met.

  The definition of a brisk varies based on your personal information. To verify that it is accurate:

  On your iPhone, in the application of the watch, go to: Watch My > health.

  More information:

  Use the activity on your Apple Watch - Apple Support

  Work with your Apple Watch - Apple Support

• NB550D - music and sleep accessory

  I will receive my NB550D next week, but I'm sure that the cable that allows the function music and sleep comes not packed.

  So should what kind of cable I look to buy?

  Greetings,
  Catarina S.

  Hello

  I put t what such cable would be a part of the package.
  The laptop would come with a power adapter.
  If in addition you must buy a compatible cable

• Satellite Pro 2100 strange colors and incorrect resolution on LCD internal

  Since a few days, I have problem with graphic in my Toshiba. External monitor works perfectly, but at the same time my laptop made of strange colors and incorrect resolution on screen LCD internal.

  This means that the graphics card is damaged? How to be sure what is the problem and what to do in such a case and not spendig a lot of money for the profesional service?

  Hello

  If the image on the external screen is seems perfect so I thing t that there could be something wrong with the graphics card.
  It might be something wrong with the screen of the laptop.
  In this case the best way is to contact the service partner allowed in your country because it can do some diagnostic tests.

  But be aware that parts like display or motherboard are the most expensive laptop parts. If you have experienced failure and if it s 100% the wrong display work so I would recommend looking for a second hand laptop with the screen on the right.

• How can I restart my iPhone 5 c? I tried to connect to iTunes and that has not worked. Then I tried now the home and sleep/wake buttons simultaneously, but that no longer works. My charger works. What should I do?

  How can I restart my iPhone 5 c? I tried to connect to iTunes and that has not worked. Then I tried now the home and sleep/wake buttons simultaneously, but that no longer works. My charger works. What should I do now?

  Looks like a hardware problem (with your home button).  You should probably make an appointment with the genius of Apple on an Apple store near you.  This link can help:

  https://www.Apple.com/support/contact/ >

• HP n278tx do not hibernate and sleep in point 8.1 of Windows + impossible to install the chipset Drivers sp63967 & sp63966

  I have HP n278tx laptop and I recently installed Windows OS 8.1 and now I can not hibernate and sleep my knees.

  When I do that it get stuck.

  And also I can't install drivers chipset provided by HP to Win 8.1 Pro.

  I can not install these 2 drivers. Please help me.

  

  You are the very welcome.

  The reason why you can not put the laptop to sleep or into hibernation is because you need to install the NVidia graphics driver too what this hardware ID.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-133679-1&cc=us&DLC=en&LC=en&OS=4158&product=6967644&sw_lang=

  I don't understand why it not install this driver.

  The only other suggestion I can offer is to see if Windows Update installs the driver.

  Go through the manual steps that above, but this time be connected to the internet, then select the method of automatic update .

  See if windows update detects and installs the Intel Management Engine driver.

• Problems with Windows 10 screen standby and sleep mode

  After downloading 10 Windows on my desktop all-in-one HP, I have problems with the display of standby and sleep mode.  When the computer turns off, he doesn't have the bright screen.

  After the upgrade to Windows 10, some laptops have experienced one or more of the following symptoms:

  • > Power LED remains lit after stopping
  • > Computer enters standby or hibernation.

  HP recommends that customers see these symptoms first update the graphics drivers by removing and then reinstalling the hardware in Device Manager.

  See the section updating the graphics driver from where can I find drivers Windows 10 and software for my model?

• HP Pavilion x 360: stop and sleep problems

  I've updated for Windows 10 and now my computer won't shut down or sleep. In order to shut down the computer completely I have to restart my computer, and then stop. If I used my computer for more than an hour, it will not be stopped or he wake up from sleep mode. I have updated my drivers and graphics cards, as well as disabled the quick start. I checked the BIOS and there is no update available. I also ran the updates of Windows. At this point, I don't know what else to try.

  Hi @bn485,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook of 360 and problems with the Shut Down mode and sleep.  I see that if you change the balanced power plan options option in the book will help. Here is a link that will help you.

  Go to your power options. Select balance, then click on change plan settings. Click on change advanced power settings. Then save changes. Restart your computer and see if the options have changed.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  You can also try:

  In Device Manager, click the arrow next to display adapters to expand this category
  Right-click on the graph, and then select Update driver software if more than 1 graphic adapter do 1 at a time.
  Select search automatically for updated driver software.

  The laptop must find and automatically install the updated driver
  Once the installation is complete, restart your laptop.

  I hope that helps.

  Thank you.

• Difference between "Auto off" and "Sleep" on LaserJet P1102W

  The user guide for the LaserJet P1102W indicates that the default Auto setting in the properties is 5 minutes.  "Automatic stop" drop-down list does not contain a setting of 5 minutes - rather it contains "never, 30 min and 1,2,4,8, & 24 hours."  However, the drop-down list 'Sleep' contain 5 min and other selections up to 1 hour.  What is the difference between auto-off"and"Sleep ".

  After the installation of this new printer, the default settings have been = 5 Minutes ' Sleep' and 'Auto off' = never

  I have several computers around the House than any print to the same printer.  I want to always available for printing without issue in the basement to activate it, but yet they want more economic mode.

  What is the difference between 'Sleep' and 'Auto off' and how should I put them in my terms of service desired?

  Thank you.

  Hello

  I understand that you are looking for some explanations between the Sleep and automatic shutdown of the Laserjet P1102W printer. I would be happy to offer you answers!

  For your desired operating conditions, I think that you already put as you would like. Standby essentially puts the printer in a State of very low power consumption, but the printer can be awakened from this State by sending a print job (meaning you don't have to go to the printer to remove it from that State). The auto-off function off the printer completely after a period of time. The only way to take the printer out of State would be to go to the printer and press the power button.

  To have several computers connected to this one printer I would recommend leaving the auto-off Never and Eve to what you think is the best. As I said, the printer will wake up fashion 'sleep' and accomplish what you ask without physically going to the printer.

  Hope this helps, have a nice day!

• Standing recalls in the middle of the night and sleep hours does not connect

  I get reminders throughout the night to get up and walk for a minute. Put my silent mode shows is not an option that I need to receive calls from work. In addition, my hours of sleep are not connect properly.

  Hello

  To disable the reminders of Stand:

  -On your iPhone, in the application of Eve, go to: My Watch (tab) > activity - turn off reminders Stand.

  Apple Watch does not sleep followed as a built-in function. If you use a third party to this end, I suggest you check out the resources of the developer for assistance or contact the developer.

• Problem of Hibernate (and sleep) Tecra S1

  Hello

  My phone behaves very strange when it comes up to the hibernation of the form. At the end of the working day, with a normal procedure I put the laptop into hibernation mode. Next morning when I start it up, just seconds after the resumption of the windows are completely it goes back to the hibernation mode! Without any warning, I can only watch what is happening. After that, I press the power button, Windows Recovery proceed once more and then everything works normally. What makes me even more confusing is that in about 50% of the situations, it won't happen. He's totally unpredictable. Battery is not a problem, because every time when this happened it was almost fully charged.

  Another problem, it is a standby mode. When I put your laptop in standby mode and leave it for the night, the next day he won't wake from sleep, but after hibernation. As it was out of battery (but the battery is almost 100%).

  What might be a problem here?

  TIA

  Hi Zoran

  I often use the hibernation mode, but sometimes I stop the computer is turned on as usual. As I know the hibernation mode should not be more than 14 or 20 days used constantly because some applications may not start correctly.

  In my opinion you should stop the laptop or restart once a week. Sometimes do and I'm sure it will be better.

• Strange reboots and the message "Windows has recovered from unexpected shutdown.

  My computer makes strange decisions. When I got off the computer for a long time and back I find message "Windows has recovered from unexpected shutdown" it happens only when I'm without my computer for an hour or more.

  My Windows Vista 64 operating system

  Hello

  Two ways to solve this problem, a point of view of sleep/hibernation and one of
  the overall performance. Even if the two methods in common, you may need to use both.

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658
  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  All the default power plans and then set them as you wish.

  I hope this helps.

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• After I login, strange "resizing" and the bar menu solid white

  MacBook Pro (retina, 13 inch, mid-2014)

  3 GHz Intel Core i7

  16 GB 1600 MHz DDR3

  Hi, I recently noticed this strange event with my mac. After I typed my password to connect I see my photo account reappear down and right a little and a larger size as if the screen was resized or zoomed in. Then, the display "adjusts" to the expected size, but the menu bar appears as a white line continues. After a few seconds, everything becomes normal. Everything happens all the beachball comes in and out... once almost immediately after, I hit return to log in and the second time after everything seems normal.

  Is not exactly a brick wall, as it does not prevent me from doing anything either, but it seems to be symptomatic of something causing a slower connection speed.

  Something unrelated with is that my mac seems to freeze randomly for a few seconds when I run the network connectivity. It's strange to me because of the plug of my macbook.

  I'm generally taken care to make sure that I have not bogged down my computer with the software shit etc, so I'm not sure what gives.

  Thanks for ANY help at all!

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.