SX-20 No. presentation on the outlet end.

FW: TC 5.1.8

No presentation is transmitted at the end after you press the presentation button but the presentation was properly posted on output HDMI 2 in the end close.

Hello

So presentation is displayed on site but not transmitted. What endpoint is on the end and what software it works? It is a p2p or multi-site/multipoint call? SIP or H323? When you share the presentation on the SX20 said in the call information that the presentation was actually not pass? It could be a problem on the receiving end...

/ Magnus

Tags: Cisco Support

Similar Questions

  • Cisco EX90: Unable to see the presentation of the end

    Hi all

    We have currently enrolled in CUCM EX90.

    Question:

    Scenario of

    1 when the EX90 will launch to share the presentation, from the other side, they were able to see the presentation that we shared.

    but in the far endpoint if they will start to share the presentation we can see their presentation and this is the only time wherever they are able to see our shared presentation.

    Conclusion: before we able to share the presentation at the other end, firstly they must commit to share their presentation we before they can see our presentation.

    Already checked the NaturalPresenter but according to audit it is already built in the EX90.

    My question is why the presentation works after end first start sharing their screen for us. But if we will undertake the first, they can't see our split screen.

    Receive your answer. Thank you!

    It will depend on the version of the software you; "re running on the EX90.

    Before TC7.0 EX90 Admin Guide says that, for a call SIP and the 5170-5177 5070-5077 UDP ports are used to connect BFCP (channel of submission).  From TC7.0 onwards, the BFCP port and the active control prefer to use dynamically ports the RTP port range.

    If a firewall blocks these ports, channel of submission will not be established and the presentation can be sent in the channel video main, which is probably why it seems to work when you call a bridge.

    Note: It is strongly recommended that you upgrade your version of software on your EX90 to TC7.3.6 to address many security vulnerabilities in earlier software releases.

    Wayne
    --
    Remember the frequency responses and mark your question as answered as appropriate.

  • Import Power Point presentations to the Prime Minister

    One thing that would be very useful would be a program of the importer, which allows presentations Power Point of peoples to be imported into an editing tool. I use CS3, XP SP 3.  on a Quad Core 3 G systems.

    I shoot a lot of conference presentations, with three cameras. Two on tripod and one end and striking detail, the other almost a locked off scale, which includes the large projection screen. and a JVC HDD camera running, I transfer tape.

    Short to get a full mixer of mink and a crew for the man, mix and make audio, the easiest way is to get the power of the speaker point thereafter. Obviuously any video they use is no problem.

    BUT, short completely re-doing the Point of power in Photoshop and create a jpeg file for each image used in the outlet, ther must be a program to convert these lines in a format that the Prime Minister will use.

    Any comment is appreciated.

    The best thing to do if you have access to Windows 7 or Windows, you can switch to the 2016 office and PowerPoint has the ability to export a stack as a MPG4 video or WMV video.

    Mario

  • Presentation of the action does not work during the Conference

    Hello world

    Here's the background
    -CUCM 10.5
    -Telepresence conductor XC4.1
    -Telepresence Server (VM) 4.2
    -Endpoint: MX300

    I have problem when sharing a presentation at the Conference meeting.
    It doesn't seem to work.
    However, the part of presentation works with success during a normal 2-way call

    I read an article by cisco,
    http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/con...

    A field is related to the function of presentation,

    Allow the content
    (Available when the preference of Service has a type of telepresence MCU Conferencing Bridge)
    Whether or not, participants will be able to send video content, such as a presentation.

    Yes: one lane will be reserved on each cascade TelePresence MCU and TelePresence MCU primary specifically for content. Use this setting to enabled WebEx conferences.

    No: the participants will not be able to send content, regardless of the number of ports available on the MCU. Content can always be displayed, since some end points provide content in their main video channel.

    The default value is Yes.

    Need MCU allow sharing feature? or I missed something?

    Thanks in advance

    Sam

    Allow that content is available only when the conference bridge is an MCU and does not apply to a server of telepresence.  The only thing you need to do within the Orchestra, is ensure that "content quality" within the model of the Conference is not set to 'Off', see the top of pg 61 of the guide that you have linked to your post.  Also, make sure you have enabled on the SIP Trunk to driver in CUCM BFCP.

  • vRO presentation: return the total size of the disk of the virtual machine

    Hi guys,.

    I have a catalog item to extend a drive, which is presented to the vRA advanced services and picks up the vRO workflow. For this reason, the default IaaS vRA no between not affecting resource management. So I would limit the end-users to a maximum size of the virtual machine - that is to say, if the size + total size they intended to expand is > to a specific size, then the workflow will report this.

    I wrote the following code to return the total of all the disks that are attached to a machine. Then, it comes to the tab Presentation vRO to fill the discs max value. It works fine when I use the code as a workflow and connect the output. However, vRO presentation does not return a value any. Anyone had similar problems or I made a stupid mistake and missed something?

    var total = 0;

    size var = new Array();

    var features = vm.config.hardware.device;

    var h = 0;

    for (var i in devices) {}

    If (devices [i] instanceof VcVirtualDisk) {}

    size [h +] = [i] devices, .capacityInKB / 1024 / 1024;

    Total += devices [i] .capacityInKB / 1024 / 1024;

    }

    }

    return to the total;




    Thank you

    bradger33

    resolved - used the wrong presentation vRO variable. Had to use rather than answer pre-defined data binding

  • After importation, all 'frames' are present, but the picture is blank (gray).

    After importation, all 'frames' are present, but the picture is blank (gray). When I tried to edit in Photoshop CC, it opens correctly. Tried to delete CC with cleaning tool. Re-installed with the same question. Repeated twice with the same consistent result.

    Photos opening are exported during the migration process and opens in Preview/Photoshop. Tried with a variety of photos with the same result as well.

    Screen Shot 2015-10-17 at 6.20.32 AM.png

    MacOS X 10.11 (iMac end of 2014)

    CC 2015 Lightroom and Photoshop CC 2015.

    Hi clementl55784534,

    Suggest you follow the steps below:

    1. Turn off apply tone auto under Lightroom preferences settings
    2. Restart Lightroom and then import images again.
  • Getting the value null inserted in the back end when the field is turned off

    Hi gurus,

    I have a TOTAL field that is the sum of the other two fields in a form. I have disabled because do not have the user enter the value. The TOTAL field is the poster of the sum of the values in the front end, but in the back-end, the value is null. Please help me solve this problem. Thanks in advance.

    Have you tried to make the point read-only? Set the read-only item and try. You can do the unalterable element by two methods,

    (1) amend section-> go to read only tab-> read-only Condition Type: always

    (2) create a dynamic Action-> event: loading the Page-> Action: run the JavaScript Code-> Code:

    $('#P1_TEST').attr ('readOnly', true);

    $('#P1_TEST').css ('background-color', '#CDCDCD');

    Tom wrote:

    set the item read-only instead (not editable by the user but will present)

    Set the element value using the da no need to activate the item before submitting because the element is not disabled. Make the point read-only so that it will submit the value to the session and point cannot be changed always.

    Thank you

    Lacombe

  • After the session ends, it is & quot; on hold & quot; If URL is used. must I really remove it?

    Greetings, people. Can someone help me determine how long meetings remain "on hold" once completed? I visited the URL to a meeting whose start time and duration suggest that the meeting ends. I had created the meeting and made an end. Should I remove it so that it responds more as "suspense"? Is there no way to leave them in "my meetings" for historical purposes, but mark it as 'finished '?

    In my case, if it is important, I had created the meeting for one on a presentation and choose to not add the participant to a list of invitation and instead used the option "anyone can use the URL. Since only he would know and it was fixed only one hour, and I'd be in it all the time, it seemed perfectly safe.

    But now if he (or somehow everyone) tried the URL again, it seems that long after the meeting, they told you it is 'pending '. I don't want such a misunderstanding.

    And Yes, I visited the URL from not in my list of breeze meeting, but rather on another machine. Any thoughts? Thank you.

    Thank you, Dave and everyone, to clarify the confusion.

  • JTA transaction is not present or the operation is not in Active state

    Hello

    I am trying to execute an asynchronous bpel process. the bpel process has 5 calls to OSB and takes about 100 seconds for completion. The OSB in the BPEL calls take 90 seconds to complete. At the end of the BPEL process, after completion, I get the following error:

    [2010-07-22 01:56:44] BPEL process instance completed "1220007"
    [2010-07-22 01:56:44] There is a system exception during execution of the BPEL instance, the reason is "JTA transaction is not present or the operation is not in Active state. The current JTA transaction is not present or is not in Active state, when processing activity or instance '1 220 007 '. The reason is the performance of this '1220007' for instance 'BPELProcess1' process is supposed to be in a jta transaction, but the transaction is not present or in Active state, please enable debugging application server transaction logs for more information... Please see your administrator about this error. ". Please check the log file of errors for more infromation. Please try to use bpel error handlers to catch errors in your bpel process. If it is an exception system, please report it to your system administrator. Administrator could perform a manual recovery of the last non-idempotent or point of dehydration activity instance.

    We do not want to increase the properties of transaction-timeout in the Transaction Server - manager .xml or the orion-ejb - jar.xml, since we have other projects with synchronous process running on the same server.

    Can someone please suggest a solution to this problem Besides not to increase the transaction time-out?

    It's because our BPEL process took more time allotted for JTA transaction.

    Check transaction timeout in j2ee/config/transaction-manager.xml.

    If you use the idempotent or control point (all that forces of dehydration) before the time specified above, you get the error.

    While BPEL actually continues execution, he cannot commit to store of dehydration after cancellation timeout and forces.

    -Sridhar

  • Hide columns in the front-end, i.e. the Oracle answers

    Hello

    I wonder if it is possible to hide the columns considered non-essential as the answers ID so that the front end users only see the column that should
    be exposed for reporting.

    Thank you

    Remove unnecessary columns from the presentation layer in the repository.

  • By dictating the long notes, using Siri, Siri will stop as soon as I take a little break. Therefore, the note ends abruptly. Any solution for this?

    By dictating the long notes on Mac using Siri, Siri will stop as soon as I take a little break. Therefore, the note ends abruptly. Any solution for this?

    For long notes, you are better to use regular old dictation - under Mac OS for a few years now, Siri is not mandatory.

    To activate it, go to "System Preferences"-> keyboard-> dictation. Once enabled, you can press the "Fn" key twice to activate and dictate the long notes in any application.

    Siri is optimized for short, quick things. I don't think that you can change, you just use the method that is better to listen to what you want to do at the time (short notes, using Siri. Long notes, use dictation).

  • Why not the preferences of the general calendar for "the day ends at:" only offers the possibility of 'am' and not 'pm '? And alerts for an event from 14:00 activate at the right time, but it's at 02:00.

    The "day starts at:" options correctly offer options of "midnight" through time "am" to "noon". Thus the "day ends at:" should have options starting with "midi" and moments of "pm" to "midnight", but instead, they are all time 'am '.

    And alerts for an event from 14:00 activate at the right time, but it's at 02:00. Maybe it's a consequence of the above.

    ???

  • How can I show only music actually present on the iphone?

    I recently had to reformat completely in iPhone 6s. Now, the 'Music' application shows all the music on my laptop iTunes library: I just want to see music actually physically present on the iPhone. I don't want to see I have to listen to or download music. There is a way to do it, but I forgot where the toggle. Can anyone help?

    Start the music app and click the artists tab (the drop down menu) in the Center and go to only downloaded music > on.

  • After you enter a URL and hitting 'ENTER', nothing happens, except if I click on the arrow at the right end of the block URL.

    In the block of the URL, there is an arrow curved to the right end of the block. When I put the cursor in the block in preparation for the opening of a URL, the changes of curved arrow to a right arrow, pointing to the right. After entering the URL and pressing ENTER, nothing happens. If I click on the right arrow, I am taken to the desired site. It started to happen about 2 weeks ago. How can I solve this problem, so that when I hit the Enter key, I am taken to the desired site?

    This problem may be caused by the AVG Safe Search extension.

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

    You can see on the AVG site if there is an update available.

  • Select Fire FTP script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script ends. Script: chrome://fireftp/content/js/local/localTree.js:134

    After the last update on Firefox FTP fire does not open easily. I get this message more than once. First time I had problems with the selection of FTP
    A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script ends.

    Script: chrome://fireftp/content/js/local/localTree.js:134

    Try to update your module:

    Check and tell if its working.

Maybe you are looking for