SX10 - Expressway required version for ARM?
Hello world
I can't find a document that tells me what version of Expressway (ARM), I need to support a SX10?
Anyone know?
Thank you very much
Page 10 says Cisco Telepresence endpoints/codecs running TC7.0.1 or firmware points later
Tags: Cisco Support
Similar Questions
-
Paid the required version for functions that eliminate the details and sensitive information?
We have downloaded version 11 of Acrobat and we need to remove sensitive information such as the details of the property and anything else relating to the documents that we do not want the end user to see. I know that it is possible to right click the icon of the Office for the paper, but with the help of this process does not remove completely all the information that we want to. I just watch the tutorial on how to remove sensitive information by using the function 'protection' (writing), but I don't see the same list of options on my version of acrobat. My guess is that these features are available on the paid version. Is this the case? Also, is it possible to set up acrobat so that by default, all of the sensitive information in the document and icon properties are deleted? We find that if we create a Word document and remove the icon properties and any other sensitive information, to remove that info again on saving in PDF format. The PDF file displays the info we do not want to send and I have tried different methods to remove the icon properties, but he seems to have no effect. Thank you for your help.
The writing tool is only available with the professional version of Acrobat.
-
"Cannot find required versions! need for versions of IE 5.5 SP2 and above to install Qwest QuickCare. "what this mean I have installed SP2? Does this mean that I have installed SP2 wronge
Hello
always check the compatibility of vista programs on the link below
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx
If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator
It is not compatible with vista, you can try running it in a previous operating system mode
This does not work for all programs
read the information below
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
-
Could not load because it requires version 10.1 or later of documents.indesignplugin Dynamics plugin adobe indesign cc 2014. Contact the vendor for a compatible version of documents.indesignplugin dynamic
I had local IT install the software, I'm not aware that any problem came during installation. The error came when trying to install the updates from the cloud of Creative. I reinstalled InDesign and I think that the problem has been resolved. I'm on a Mac with OS X v10.9.5
-
The Java plug-in is not installed.
The required version: 1.5.0_11Download the Java plug-in from this server and install it manually.
When you try to load it shows that he is responsible.
This has happened
Each time Firefox opened
== I had to reinstall Firefox on my new laptop computer
Other issues: to correct the problems of security/stability
Install/update Adobe Flash Player for Firefox: your version 10.0 r45; current version 10.1 r53 (Security important update 2010-06-10)
See: Flash update
-use Firefox to download and SAVE to your hard drive (save to the desktop for easy access)
-the release of Firefox (file > exit)
-Make sure that Firefox is completely closed (Ctrl + Alt + Delete, choose Task Manager, click the processes tab, if "firefox.exe" is on the list, made a "firefox.exe" right-click and choose end process, close the Task Manager window)
-Double-click the Adobe Flash Installer, you just download to install/update Adobe Flash
-When Flash is installed, start Firefox and test the installation of Flash here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507 & sliceId = 1- NOTE: under Vista and Windows 7 you may need to run the installer of plugin as an administrator by starting the installation program via the context menu if you do not get a UAC ask permission to continue (that is, nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
- NOTE for IE: Firefox and most other browsers use a Plugin. IE uses ActiveX of Flash version. To install/update IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash Setup.
- See also: http://kb.mozillazine.org/Flash ~ ~ Red:and~ ~ How to change options to add Adobe to the list of allowed sites
-
I need version for Mac OS 10.7.5 - impossible to Mavericks
Help!
I had Skype on my Mac, but due to a lot of documentation that it could cause some problems with the functionality of copy - paste from excel (which is strangely) I removed it, assuming I could reinstall it later. The problem is that he deleted my trash. Now I need to reinstall, but the latest version that comes with the installation program requires the MAVERICKS as the operating system.
The problem is I'm in the middle of a big project in Final Cut Pro (version 7) and everything I read said I should NEVER improve my BONE in the middle of a project.
I really want to get my back of Skype - how can I get the version for 10.7.5? Help!
Never mind - found on a Web site for the old software. Thank you.
-
LabVIEW Embedded for ARM build fails
I use the LabVIEW Embedded module for ARM microcontrollers with the
The EK-luminary LM3S8962 Evaluation Committee.When I try to build/run vi as an example in the tutorial (pg 13, the start-up
doc) I get the following error: Build Failed. Build failed with errors.The result is the following:
Building target "LabVIEW".
mounting Startup.s...
compilation of RTX_Config.c...
.. \System\RTX_Config.c(157): error: #130: wait a "{}".
compilation of Retarget.c...
compilation of TargetInit.c...
compilation of ARM_irq.c...
compilation of ARM_RTClock.c...
compilation of ARM_Serial.c...
compilation of EKLM3S8962_Display.c...
compilation of LM3S_EMAC.c...
D:\Program NIUninstaller Instruments\LabVIEW
8.6\Targets\Keil\Embedded\RealView\Drivers\RL-ARM\Include
\RLARM_Net_Config.h(31)
: error: #256: invalid redeclaration of type name "S8" (reported on line
37 of
"d:\Keil\ARM\RV31\INC\RTL.h")
compilation of ARM_I2C.c...
compilation of ARM_SPI.c...
compilation of LM3S_Pins.c...
compilation of LVCGenIntInit.c...
compilation of Untitled_ARM.c...
compilation of lvEmbeddedMain.c...
<-----snip------>
compilation of RLARM_CAN_Wrapper.c...
Target not createdYou forgot to tell us about your version of MDK - ARM (perhaps MDK 3.5 +).
Open Keil uVision and double-click these errors:.. \System\RTX_Config.c(157): error: #130: wait a "{}".
Just move __task at the beginning of this line
__task void os_idle_demon (void) {}To make a permanent change, you could also modify the
\Targets\Keil\Embedded\RealView\EK-LM3S8962\Template\System\ RTX_Config.c -----snip------>\RLARM_Net_Config.h(31)
: error: #256: invalid redeclaration of type name "S8" (reported on line 37 of "d:\Keil\ARM\RV31\INC\RTL.h")
Comment out the line:
typedef char S8; / * defined elsewhere from MDK 3.5*.It will be for good.
-
Identify the official gcc (or supported) version for a given version of Labview
As far as I know, there is no web page OR identify the official (or at least, taken in charge) gcc / g ++ version for a LabVIEW given output.
By "official version", I mean one that is binary compatible with LabVIEW executable file (i.e. the binary).
NOR must provide this information (as well as The Mathworks for Matlab). Here, here's a tip for vs information:
1. the cd in your install directory local labview (i.e. the binary labview where)
2. type the following command: strings. / labview | grep GLIBCXX
3. identify the GLIBCXX version (i.e. stdlibc ++) highest in the resulting list (say GLIBCXX_3.4.9 for LabVIEW 13)
4. open your favorite web browser and visit the gcc ABI policy and guidelines page
5. search for GLIBCXX identified in step 3 (which is GLIBCXX_3.4.9 in our case)
6. you should find something like: GCC 4.2.0: GLIBCXX_3.4.9
7 pray have the corresponding version of gcc (i.e. 4.2.0 here) installed on your host computer or, at least, to have the corresponding manual available for your platform
8. If step 7 fails, be prepared either: recompile the gcc version required, upgrade your operating system, or update your copy of LabVIEW
Hello
It depends on the operating system you are using:
http://zone.NI.com/reference/en-XX/help/371361G-01/lvhowto/compiling_cin_source/
For Linux of LabVIEW, you have a list of libstdc ++ supported:
http://digital.NI.com/public.nsf/allkb/4596349739E988088625761C005B197E
LabVIEW windows, is Microsoft Visual C++:
http://www.NI.com/white-paper/3056/en/
http://digital.NI.com/public.nsf/allkb/6229347C7982CC81862576E30076A4AE?OpenDocument
If you are using GCC reaaly, there are different workaround solution, withour support:
http://forums.NI.com/T5/LabVIEW/creating-a-DLL-including-Manager-support-in-MinGW-GCC/TD-p/633123
Best regards
-
I tried viewing a presentation power point and got to page 2 and my computer crashed. Thought on... what he did previously trying to display a PPP file, but I thought that it was not my computer to the actual file. now I have my doubts and also this time an error message came that said... This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer. can someone tell me what I should do next?
You left out which version of DirectX has been shown.
As far as I know, your Intel 945GM should support DirectX 9 and because you have XP sp3, you must have at least DirectX 9 installed.
I met the following, but it shouldn't apply to Powerpoint:
Some such as the Intel 945 GM Intel video cards have a design limitation which may cause problems when you try to run the Source Engine games. 3D graphics kernel does not support transformation of material, light and the vertex shader to similar technologies, which is an important part of the pipeline of 3D acceleration. Instead, this functionality is emulated in software that can reduce the compatibility and performance with 3D games.
I don't have a solution for you (assuming that DXDIAG, in fact, reports to have DirectX 9 or higher). You can see if you install a new driver support, but if it were me, I would be first contact Acer technical support or ask your question in another forum as one of the following conditions:
Intel graphics Forum: http://communities.intel.com/community/tech/graphics
Forum PowerPoint: http://answers.microsoft.com/en-us/office/forum/powerpoint (select the corresponding forum for your version of Powerpoint). Include the results of DxDiag, including the version of DirectX. If there is something unusual about the image that causes the crash, include this info as well.Normally, for notebook/laptop computer, it is better to get the drivers of the mfr of computer rather than the manufacturer of the device.
Acer drivers for your computer are here: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=535 (you want the Intel VGA for XP driver)
Intel has a newer driver: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Internet+Devices&ProductLine=Netbooks&ProductProduct=Mobile+Intel%C2%AE+945GM+Express+Chipset+Family
It's the main Intel support page: http://www.intel.com/p/en_US/support/highlights/graphics/945gm -
Graphics card does not support the required version of DirectX 9.0
Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer. My question is what that update of video card do I download to fix this problem and where can I find.
Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer. My question is what that update of video card do I download to fix this problem and where can I find.
=========================================
It may be interesting to try to go to support
site Web of MFG. your video card and
search for course Windows XP Compatible
drivers.(FWIW... If your computer is a laptop... check
the manufacturer of the comput4er one
updated video driver)If you do not know the make and model of
your video card... check documentation
supplied with the computer.Also, you can try the following steps...
Reach... Start / run... type...
Msinfo32... Press on enter.On screen Information System... Choose...
Components / display...You should find the make and model of your
adapter display as well as the version of the driver.If the driver on the Web site is no longer
current than you run...
Download and install it. Also, you should find
and follow the installation instructions on the
support site. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *. -
Error-Please install the required version of Flash Player
For what I'm trying to access with Adobe FP, it requires version 9 or higher. I started with version 11-do not work. I've updated to version 20 quo will not work. I have spent an hour on the help and support solutions here. What I found was going to tools/security and uncheck quo XFiltering Active will not work. Why if I have the required version it will not work?I needed to install the plug-in as well. Uhg! I hate programs... 4 hours of my time lost because of something so stupid simple.
-
page every time I try to download a free trial version for the sequels, I get to the legacy that when I click on free trial he always says we know the atm problem but its nothing to with the wifi is good, but its unique every time Please HELP
You MUST have a 64-bit computer and operating system... What is your computer?
-Programs are supposed TO not view or download if they are not installed on your computer
MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html
-
I need to measure an area on a photo similar to what is shown in https://www.YouTube.com/watch?v=E3O-V6WLw0g . What requirements/version of Photoshop, I have to buy?
Photoshop Elements 10 is a different program than Photoshop and it doesn't have this feature.
You must use Photoshop for this.
-
Activation is required. version of Photoshop cs
I bought this version of the operating system Windows to Photoshop CS. currently used 8.1, Activation is required. version of Photoshop cs
For Photoshop CS2 and earlier activation servers have been closed. You can still get CS2 by following the instructions in this link:
ml https://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.HT
-
Swedish version for Photoshop Elements on Mac?
Swedish version for Photoshop Elements on Mac?
Not available, I'm afraid...
Adobe Photoshop Elements 13 for Mac, Windows - system requirements
Maybe you are looking for
-
How can I remove icons of the screen of high office
How can I remove icons from desktop screen?
-
Satellite R850 - scrolling on the touchpad stopped working
For no reason at all. (as far as I can remember). I was just stuff randomly on pc (like every other time), surf the web, while I just recognized that my scrolling on the touchpad does not work. I tried to restart the pc, turn on/off touchpad, but doe
-
I can't compose or reply to messages in gmail with firefox on my mac
I have firefox version as follows: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.5; en-US; rv:1.9.2.12) Gecko/20101026 Firefox/3.6.12 GTB7.1 I can't reply or compose messages in my gmail account using this browser. He gets locked in the status of "loa
-
the trust relationship between this machine and the primary domain failed
Hi I have a virtual server (Server 03) with a vista machine, I can log on to the vista computer, but it happens with the trust relationship between this machine and primary domain failed. I tried to delete the domain vista machine, but he says you ne
-
I have a Photosmart C6380 all-in-One printer and it's only printing colors. It will not print black. I just changed all the ink cartridges. I tried unplugging everything, then speed up my system and it still will not print black. Does anyone have