SX20 camera usb connection / why no support for C40, C60, C90?

Similar Questions

• My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years

  My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years - any changes made on the network wireless to our knowledge.  Printer works fine in USB mode on old Windows 2000 office.  Network sees the devive asked to detect devices.  Wireless to the printer hardware is perhaps not handshaking...?  Please let know us that he is a very curious pnnc.

  Windows 7 is updated as well as the print driver.  Thank you.

  Hello abir.

  Thank you for giving us the opportunity to help you with your concern for Windows.

  From your post, it seems that you cannot print from Windows 7-based computer.

  When you say "no changes made on the network wireless to our knowledge", which is the type of network you're talking about? (Workgroup, domain)

  It is a difficult problem to diagnose because there are many printers on the market and many reasons why it could not work.

  We will try the steps from the following link and check if this solves the problem.

  Why can I not print?

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

  You can also check this link:

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Response with the State of the question, too, let us know if you need help with Windows problems and we will be happy to help you.

• New Ati Mobility Catalayst pilot - why no Support for Toshiba laptops

  The new driver ati mobility report, released 2010-05-26, does not support Toshiba laptops. It is said in the release notes:

  The following books are not supported in this version:
  All laptops launched after this version of the driver
  Portable computers compatible switchable graphics card using the Intel chipsets.
  Toshiba laptops (please contact the OEM driver laptop
  supported for these laptops)

  My question is, Toshiba released a update driver display for their laptops, especially P300-281 PSPCCE Windows 7 32/64-bit?

  I was expecting an ati mobility denounce pilot since I bought this laptop.

  Hello

  > Toshiba Will release an update for their laptops display driver, especially P300-281 PSPCCE Windows 7 32/64-bit?

  I think it's a bad place to ask this question.
  This is a user to user forum and we can only speculate if you want you can call and ask the Toshiba hotline for new...

  But the fact is that Toshiba provides drivers updated the own to protect the graphics chips from damage.
  Other manufacturers don t know what why do

  However, I managed to install the graphics driver from ATi and nVidia page on my two Toshiba laptops.
  I did it in the Device Manager. I used the Advanced Setup that allows you to point to the driver files downloaded from the page from ATI or nVidia

  But note; You can use and test 3rd third-party drivers only at you own risk.

• USB driver is not support for HP Deskjet 1050 j410a.

  My HP Deskjet 1050 j410a is installed on a windows 7 and show a code 37 error message which means usb driver is not supported. I had reinstalled so many times and also restarted the pc but the problem does not resolve itself. kindly help me to solve this problem.

  Hello

  Make sure you first upgrade the driver by uninstalling the HP software and install the latest version below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109412-2&cc=us&DLC=en&LC=en&OS=4062&product=4027465&sw_lang=

  If the same continues to try to plug the USB key into a different port on the PC and check any change.

  Then try another device (for example, the disk on the key) and check if you can see a similar behavior, if so the problem may be with your PC Chipset problem.

  If the issue appears only on the Deskjet 1050 and no step has not resolve the problem, try an another USB cable from the printer and check any change.

  Shlomi

• Why complete support for an operating system (XP), you have spent YEARS "HOTfixing, patches updates to work around of clogging of the holes and SP1, 2, 3ing up to what is not too bad now, only to tell me that I have to buy another OS

  Why I feel like I'm being forced to purchase Win. 3. " Past years forging XP in an operating system that's not bad now. Although I am terrified at the thought of having to re - install of my original CD. It takes days of camping to microsoft update for Hammer back to XP SP3 with all the trimmings. And then it happens... I had the great I dea of upgrade to Nero 10. 'Re back us there with the shopping list of *! that must be installed before the upgrade it is... NetFrame 3.5 SP1 is working and don't forget the windows 3.1 install updated before... ... Close updates tofix Pluss a KNOWN PROBLEM or 2, with the installer of anyway, that's when I started to laugh uncontrolably, because at that time, I had forgotten why I was reading even such things. Then to know that 'GEE we are about to turn off all support youbought JOKE many years ago. Well, I gave VISTA a shot and when too paranoid and secure OS told me that all the things that I had no access to security clearance or authorization to do on... MY PRIVATE ADMINISTERED AND APPARTENANT PERSONALLY BUILT HOME SYSTEM AND that I tore threw it in the trash and reinstalled XP SP1... FULL CIRCLE. I'll stick with NERO 6.6 and sleep tonight. Thanks as always to Microsoft technical support. Don't be a stranger now. Ok?

  You can buy a PC modern with a Windows 7 operating system to the modern address very low cost these days.  Here are a few examples.

• USB cam usb driver prodent 740 has for Windows 7?

  Anyone know of a driver for windows 7 for a prodent 740A USB cam?  Works from windows xp with driver not existing windows 7...

  All win7 driver required for your instrument, if it is not integrated in win7, is supplied by the manufacturer of this device.

  It seems likely, based on your description, that there is no driver win7, at least in the disc that came with the device, visit this site to the to see if there's a software/driver update

• Why no support for GeForce GFX 750 Ti specifically?

  Today, I received and installed my new GeForce GFX 750 Ti, purchased specifically to be able to use After Effects properly. My last card is an ATI/AMD over-pants which has no CUDA and therefore could not use Ae. So I was using CPU only! That is total madness.

  I was extremely disappointed to realize that my new GPU also is not used almost at all, and it is just as slow as my CPU only! ... There is no difference. I expect the difference to be like night and day.

  Yes, I have the latest correct driver.

  Yes, I checked the other things using the GPU indeed are much faster.

  I looked through all the settings in After Effects and tried to make it use the GPU, but it won't be fair. Then, I saw on some pages of compatible maps that Adobe lists all of them except my card (essentially). I didn't believe my eyes. I didn't know such a list even existed, and I especially don't think that 'some models' of the same brand and model series of graphics cards would not be funded. It makes no sense at all. The weakest and most powerful cards in the same series of fools are supported, but not my card specifically? It's... amazing.

  It must be a case of them simply not having yet to test my card pretty well to the call "support", but it still sounds fishy to me that my card has certainly has CUDA and is quite powerful. Much more powerful than the other supported cards. It does not make sense to me.

  Of course, I put to 'use the GPU even when', but again... it seems not be used. It kills me. What keeps Ae to use my card?

  Hello Glitchness,

  I was extremely disappointed to realize that my new GPU also is not used almost at all, and it is just as slow as my CPU only! ... There is no difference. I expect the difference to be like night and day.

  Right, after effects uses CPU and RAM, not the GPU except for acceleration of 3D compositions plotted the RADIUS, which is a feature that we are no longer work on shouldn't you be too concerned about.

  It must be a case of them simply not having yet to test my card pretty well to the call "support", but it still sounds fishy to me that my card has certainly has CUDA and is quite powerful. Much more powerful than the other supported cards. It does not make sense to me.

  Of course, I put to 'use the GPU even when', but again... it seems not be used. It kills me. What keeps Ae to use my card?

  The only feature you are looking for the GPU to support does not work in your particular case. Your new GPU NVIDIA CUDA a, but not the library of OptiX required to accelerate traced to the radius of the 3D compositions, then your GPU will never work in this one function.

  If this is not a deal breaker, my suggestion is to go ahead with the knowledge that the GPU is not important for the performance of After Effects or your particular workflow.

  Thank you

  Kevin

• Why no support for Podcasts on Apple Watch?

  Apple: I think to buy a Apple Watch, but I love my podcasts.  Why is there an app to watch podcasts?  Watch + Bluetooth headset = medium ideal to listen to podcasts when we're working.  Don't want to have to carry my iphone when you work if I don't have to!

  You might need a third-party application > https://itunes.apple.com/us/app/overcast-podcast-player/id888422857?mt=8

• Support for new NAND flash

  Hi all

  As you know, according to the version of the TC TC5.1.4 software, all the codecs of series C/MX/SX/EX newly built have new NAND Flash.

  If some specified software must be applied to them.

  'Series C' means "C20, C40, C60, C90", is this correct?

  It feels strange to me that Quickset has same flash memory with codecs for Integrator as C90.

  Best regards

  Kotaro Hashimoto

  This applies to the C20, C40, C60, C90, EX60, EX90, MX200, MX300 and SX20.

  So yes, you are correct that C-series Endpoint is C20, C40 and C60 C90, but please note this profile include with these endpoint of series C and system.

• Why my windows 7 64 bit is not in support of my USB connected brodband modam UTSTAR UT300R2U, if you have drivers please send the link

  Why my windows 7 64 bit is not in support of my USB connected brodband modam UTSTAR UT300R2U, if you have drivers please send the link

  Help, please

  If there is no driver, your ISP will have them, NOT Microsoft. Contact your ISP...

  OR...

  You have not need drivers, if you are using the RJ45 connection. Unplug the USB cable and attach a RJ45 patch canble between the modem and your computer.

  The computer must connect after doing this

• WEBCAM HP HD 3100 want support for windows 8 pro camera app

  Hi, this is first time I write a post, because I am not able to find any support for my HP WEBCAM HD 3100 for windows 8 pro , with windows 8 I have a camera app name , and what problem I face is that whenever I want to use my webcam with this application, the error message has just been not detect camera , I went for the support of the windows forum 8, they said to refer to the manufacture for driver problem, and there is not the issue, that the software HP HD 3100 driver installation is ARCHSOFT and ARCSOFT I VISION which I had already installed on my PC, the webcam works perfectly with other services webcam chat webcam with another application , Its just that it does not work with the individual CAMERA app.

  Please tell me what I can do to remove this problem with the camera application.

  Respect of

  Amit

  Yes, it is compatible with Windows 8.1 since it works in my laptop even without installing the supplied software suite. I had to install it for Win XP but win 8 pilots inside to operate the camera. Try it on a different usb port. Remove and uninstall the software from the Control Panel programs and do a system restart. Let the appliance must be installed by windows with it is in built drivers. This would remove any incompatibility between Windows and drivers you have installed.

• File USB supports for disappointment 19BL502B TV

  Hello

  After reviewing various brands and models of 19-inch TVs, I decided on the Toshiba 19BL502B, after downloading the manual for http://www.toshiba-om.net online.

  What particularly attracted me to it was the support of USB for movies Xvid encoded, as described in 'Appendix C: supported File Formats for USB Mode' in the manual that I downloaded from the top.

  So, I bought one, paid in cash, but when I try to run files xvid, TV does not have this format.
  Research in the paper manual that I got with the TV, Xvid files are not mentioned at all in Appendix C.

  Convert these files in mpeg2 standard comes with a heavy fall in quality and even when converted to Vob format, the image is ok, but there is no sound.

  I tried to take it back to the shop but they say there is nothing wrong with television, as it does what it says in the manual.

  So what's happening? Why my new TV from Toshiba UK does not supports xvid, even if the online manual says it does, and I know that make televisions more expensive and larger Toshiba?

  Can I get an upgrade of the software that supports xvid as advertised?
  My software version is 0.6.6 V and when I do an update he claims it's the lates version.

  So is there an earlier version of the software which, is there a place I can download it, put it on a USB key and upgrade to get what I consider all of the announced features?

  I am very, very disappointed, because it was really the main reason that I bought the machine, so I didn't have to reconvert and DVDs to read.

  Disappointed Frank.

  Hello

  File formats supported for USB mode are listed in appendix c.
  And the video Format Xvid is supported for files with the file extension. AVI
  So if your movies are encoded in the format xvid video, you must use the .avi file extension.

• USB connection does not work on my computer for hdr-cx260v

  It is a question (especially) on and off (sometimes). I have worked with Sony and have sometimes succeeded. With the help of the 'extra' 16 GB card works to connect and load. My problem is when I use the video stored in the internal memory and using the usb connection. If/when I ever actually loading the data from the internal memory (I have actually already loaded most, but not the most recent), I intend in the future to use only the memory card "exernal. My most recent appeal of Sony said I have no help since the camery is 2 years and more - they send me an e-mail to a site that gives instructions, but the instructions don't seem to solve my problem. I don't seem to have any connection problem "devices" of my USB ports.

  When I connect the camcorder usb to my desktop (using different connections of USB drive) pc, my computer does not recognize the fittings of the. When I use another card memory USB for same usb connections, the computer recognizes the drive. There have been a few times when the camcorder has acknowledged the connection of the camcorder (most recently on June 12) - but this does not occur at thie time. If I take the memory card 16 GB additional of the camcorder and connect it to the connection of memory card, the computer has always recognized it.

  My problem is trying to get the video from the cameras internal memory via the USB connection.

  I think if/when can I get these loaded files, I have the intention of is no longer using the internal memory of the camera and always use the extra memory card.

  Stone

  I realize that if I could have the laptop recognizes the usb connection, I could manually copy video files myself, even if I think THAT TDC would have also worked in this case.

• What type of support for labview usb protocols?

  Hello guys I want to connect a device to your pc via a usb port and I want to use labview to analyze the data.

  But first of all, I would like to know what usb protocols support for labview.

  USB, USB CDC and other TMC?

  I ve read labview recognizes a raw device to the usb, but what is? Is it VI to read and send data, or I have to do? If these VI exists, they do the handshake? flow control?

  Thank you.

  Please read the chips and have a look at the USB specification (it is linked to in the nuggets).

  TMC, CDC, MAss Storage are all built on the basic USB protocols.

  LabVIEW has no built-in support for one of these classes of devices except Test and measurement.

  Shane

• HP psc 750xi - USB connection. for windows7 professional 32-bit. driver does not work.

  HP psc 750xi - USB connection.  New windows7 professional 32-bit.  I downloaded the proposed driver from hp.com but ' the selected printer is not currently supported by this wizard ".  Help

  Hi flojo9,

  Follow the steps below to load the driver for Win 7.

  1. open devices and printer

  2. click on add a printer

  3. replace the USB port and then click Next

  4. click on Windows Update (step 1)

  5. once the update is complete, you will need to select the PSC 750xi driver in the list on the right (step 2)