SX20 double screens - how to mirror
Hello
I have several SX 20 s with dual licenses and 2 screens installed.
I want both screens to show the same thing with video and presentation on each screen.
I tried to define the role even on both screens with no luck.
Try to set the following, you will essentially define your system dual screen to behave as if it had only a single screen.
- Configuration of video monitors: unique
- Video output setting HDMI [1, 2] MonitorRole: Prime
Tags: Cisco Support
Similar Questions
-
t5570e double screen RDP?
Working for a client where I set up a server 2008R2 in RDS mode. Bought 2 t5570e due to one of the users who need both screens.
The user one screen, it's obvious: Configure an rdp session at startup; When they turn on the morning, the default standard user connects, starts the rdp session, the user connects as themselves, bingo: Office full win7. Simple.
Two screens, but... not so simple.
So: how to set up the double screen of rdp on the thin client? Do I need a dual video card display in the server?
Well... that was easy. :-)
mstsc.exe/span
Fact. :-)
-
Problem with 5.2 and computer ThinClient view double screen
Hello
When I try to use the double screen with Windows 7, PCoIP Protocol and a computer ThinClient Fiju FUTRO S900 (3.8.0) it doesn't.
The office is just mirrored between the two screen but it is impossible to extend the desktop. I can't change the display settings in Windows and as much as I know there is no GPO that prevent to do.
When I connect to this virtual machine with View Windows Client it works.
Any help?
Thanks in advance.
OI!
I found the solution.
Setting the screen must be configurerd on the display of the computer ThinClient S900 preference.
-
In Entourage, all the incoming mails are doubled. How can I fix this?
In Entourage, all the incoming mails are doubled. How can I fix this?
Entourage is not an Apple product and there are very few users Entourage here. I do part, but never encountered the problem you describe. You the best chance for a quick resolution is to post your question forums Office: Mac from Microsoft here:
Everyone he's a Mac user AND a user desktop, something you can't say about Apple forums. You will get the quickest help there and I think you'll find contributors more useful.
When you post here, do not forget to include your Office version and your version of Mac OS x.
-
I had to get a new phone because I dropped one and damaged the screen how am I supposed to remove the information from the old phone if I don't?
Are you turning in the Apple device, a company or the insurer? Can you turn on the device? If so, you could try to send a command to erase with iCloud. If this is not the case, if her deal with Apple, they he will wipe away. If the only damage the screen, you don't want just the screen replaced?
-
The search is not over the top on the screen how do you put again, I can't go to my favorites, I can't queue, edit or anything of that type. How to get those back?
This has happened
Each time Firefox opened
Is two days ago
Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.
-
I have a Compaq Desktop model number: SG3-250UK and glancing to the establishment as a double screen, search on the web, but had no luck trying to find one, I am sure they must be available, can anyone help?
philiom wrote:
I have a Compaq Desktop model number: SG3-250UK and glancing to the establishment as a double screen, search on the web, but had no luck trying to find one, I am sure they must be available, can anyone help?
The only upgrade to the video that you can install is a PCI Express x 1 video card with two video. The card must be a low-profile PCI Express x 1 video card (with 512 MB or less VRAM) that there is no PCI Express x 16 slots on the motherboard. For a card with VRAM than an upgrade of the power supply must be considered as your original power supply is only 180W. Who does not have capacity to a level that will attract a lot of current.
Best regards
ERICO -
My iPhone accedentely fall after I start to be verticall line on the color screen how can fix this
My iPhone accedentely fall after I start to be verticall line on the color screen how can fix this
You will need to have the device examined by an Apple store or Apple authorized service provider. He may ask you to replace your device.
-
I use Windows 10 and use the Canon SX20 IS. How to use the function of Photo stich?
I use Windows 10 and use the Canon SX20 IS. How to use the function of Photo stich?
Is it possible to get the procedure to use feature stich photo?
Will be Zoombrowser EX for windows 10 wotk?
If any expert can guide me... that will be great.
Hi Sat17,
Thank you for your inquiry.
For Windows 8 and beyond, ZoomBrowser EX has been replaced by EX. ImageBrowser
Your software you will need to updated for Windows 10.
You can access the software for your camera by clicking here. Once on our site, scroll down to "Drivers and downloads", then use the drop down menu to choose "8.1 Windows" or "Windows 8.1 (x 64)".» Your camera software has not been updated for Windows 10, but for Windows 8.1 software will run on your computer.
To update your software, click the [Select] button to the right, then click on "How to download and install" for installation instructions.
-
To load up my web site, I use firefox ftp it keeps disappearing and I can have access to it even though I know that the program is on my computer
Original title: I'm using firefox FTP I used it for years. All of a sudden whenever I click on ftp fire that it disappears from the screen how can I find it again.
Hello
You did changes to the computer before the show?
I suggest you return the item for more information about the issue:
Support
http://FireFTP.mozdev.org/help.html
I hope this helps.
-
My pinball 3d crashes when I go to full screen - how can I fix
My pinball 3d crashes when I go to full screen - how can I fix
Hi Dave,.
I suggest you to follow the steps and check if it helps.
Method 1: Perform a clean boot, and then check if it helps.
How to configure Windows XP to start in a "clean boot" State
Note: Make sure you perform the steps in How to configure Windows to use a Normal startup state to start your computer normally.
Method 2: Update video card driver and check if it helps.
How to manage devices in Windows XP
Note: Read the sections update or change a device driver from the link above to update the driver.
Method 3: In addition, you can also run Microsoft Fix - it from the link to fix the problem with Direct X.
-
T500, double screen, Windows Server 2008 R2
Hello
Been looking around, but has not found the solution yet, and I hope that the answer is not NO!
I have a dual boot of installation, one with W7 with Win2008 Server R2 SP1.
Under W7, double screen works fine.
Under Win Server, it shows only the monitor to the laptop, I tried to hook up a monitor to the port-D, VGA, both at the time and one in a tower. Start with VGA connected, start with D-port plugged.
nothing...
None of those trial showed Windows I got a second monitor.
Tried watching pilots, they clam to be up-to-date, tried to install Presentation Director, as I thought, this is not installable on Win server.
I have the sometihg mist?
Thanks in advance, if it works, No 4 laptop computer sales will be happy!
Alexander
PS: Sorry for the bad English, not my native language
Finally got hold of 2 laptops, we worked so I grad info on drivers.
Necessary the Mobile Intel (r) 4 series Express Chipset Family
Here is the zip file with the installation program:
http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=20602&ProdId=2991&lang=eng
Extracted, run, restart, worked, made my day!
Alex
-
Start button has moved to the top right of the screen, how to do this back in the right place
my Start button has moved to the top right of the screen, how can he put it back right grandy
Hello
Drag the side down. Make a right click on it and UNLOCK 1. Sometimes it can be difficult to
Take then try in several places.Move and resize the Windows Vista taskbar
http://maximumpcguides.com/Windows-Vista/move-and-resize-the-Windows-Vista-taskbar/
Unlock and move the taskbar
http://Windows.Microsoft.com/en-us/Windows-Vista/unlock-and-move-the-taskbarHow to lock or unlock the taskbar in Vista
http://www.Vistax64.com/tutorials/150820-taskbar-lock-unlock.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
I have 2 inch black margins on the left and right of my screen - how to remove and expand my screen
Hello
I suggest you run the fixit and see if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problemsFor more information, see this link:
http://Windows.Microsoft.com/en-us/Windows-Vista/getting-the-best-display-on-your-monitorIt will be useful.
-
Card double screen disable integrated video
I have a question in regards to multiple monitors and Vista.
I installed a card double screen and sound essentially disabled the on board video screen. It appears from the documentation, I found that drivers on the double map screen and embedded video are different and must be the same. I updated the chipset Intel G45/43 built-in monitor drivers, but still no luck I continue to make the same mistake:
"Incompatible graphics card has been disabled. At least a card on the system has been disabled because its drivers are not compatible with the VGA card driver".
According to the documentation, I found the driver WDDM and XPDM drivers must be the same. What else do I need to update (not to mention that the video driver) to make the onboard graphics still works? Thank you.
Hi Paul,.
You must get in touch with the Intel to get help on this issue.
Maybe you are looking for
-
RD XV47KB still not eject a disc from the DVD unit
I have a problem, for some reason any it ejects a disc from the dvd unit, I tried the obvious solutions without result, any suggestions will be greatly appreciated
-
Calibration touch screen CLIQ 2
I have problems with the touchpad by using methods tap both swype, which suggests that the calibration is a little off. As a result, it is almost impossible for me to use the on-screen keyboard. I've not found anything that suggests that it is possib
-
HP Officejet Pro e-all-in-8620: unable to print on the printer 8620
I installed the printer and e-print ok since all devices work. Wireless printing function works well for all my other computer (windows 10) except that I can't get my Sony SVT131A11L computer to print to the HP 8620 wireless. My Sony computer will pr
-
I have a HP dv6t with beats. I think it's a dv6t... the tone settings look like that... but on mine I have 1 kHz, 4 kHz and then once again, instead of what the picture has...? Please tell me the best way to resolve this for the American rap/hip-hop
-
with a 2 drive formatting issues to WD cannot format passed 1 TB (931 gb)
I have a problem of formatting with my new 2 Terabyte Western Digital Drive using Windows tools (computer management: storage: disk management) I am running Vista Ultimate 32 bit SP2 all patches currentASUS P5NSLI MB (award bios) bios is more recent