SX20. HDMI with audio and video?
Hello.
I have to integrate a SX20 codec with Extron HDMI matrix as the main source of video + audio.
The main HDMI input, support with audio video integrated?
Thank you.
Luis
We use the scalers Extron (DVS-605) to power the video (from several cameras in a provision of PiP) in our SX20s - however, we feed the audio through the mic connector.
We have not tried audio HDMI at all. The cards say it should work, but there is another discussion (ie the SX20 - Audio HDMI camera) where he says it's a bug with the documentation (CSCuh72577).
The TC7 Administrator's Guide (Page 61) says that the HDMI Audio works that when using a camera with a built-in microphone Cisco, and, if you use any other device, the HDMI audio input will be disabled little matter however, you set the end point.
The CE8.0.x software has removed the option "Audio input HDMI Mode" completely (Page 8 of CE8 Administrator's Guide).
In short, I don't think you'll have some luck with your Extron HDMI audio, so you'll have to do as we did and feed your audio in via the microphone or the content entered.
Wayne
--
Remember the frequency responses and mark your question as answered as appropriate.
Tags: Cisco Support
Similar Questions
-
replace her with audio recorded separately and run with audio and video original
I recorded the audion with a high quality digital recorder. How can I replace the audion taken with my video camera? and make sure that it is in the sink with the video.
Place the video on video 1 on your timeline. Right-click on it and select Delete Audio.
Then press your Ctrl key (to avoid the ripplling) and drag your new audio Audio 1.
I guess you used a fighter or some other cue audio and video so that you can synchronize the two lanes. Otherwise, it's just trial error to get them in sync.
-
Just hooked up our new Apple TV. Excited is no longer need to use both optical HDMI cables so that everything happens [with our compatible audio receiver HDMI.] But to hook the HDMI cable to the receiver, it sends audio and video to the TV. The audio will not play back via the receiver which is very annoying. Anyone else having this problem?
It all depends on how your receiver and the TV are connected. the general idea that underlies the HDMI, is that he send audio/video in HD quality via the same cable...
my system is configured - Live tv on HDMI1, HDMI2 on ATV, bluray on HDMI3 and cable optical audio output to receiver - no "entry" material I look at, the audio comes through tv receiver.
on the other hand, my father has everything connected to the receiver via HDMI, which acts as a transition to television, but he needs to change the entry on BOTH the TV and the receiver...
How is your audio connected TV to the receiver - it cable on which exit?
-
I formatted and reinstalled xp to correct some problems and my multimedia audio and video vga drivers were lost. I do not have a CD with info and the Add Hardware Wizard cannot find the drivers. How can I fix it?
You may be able to download the drivers from the web site of the manufacturer of the computer.
-
I have a Lifecam HD-6000 laptop. Since the first day, I had trouble with the audio and video lag during playback. It cuts sometimes several seconds each time. Any program I opened to view it. Windows Media Center, Real Player, Media Player Classic, etc.
There is also a problem with the autofocus. It will randomly in and out of focus, more spoil videos that I do. Any help with all these problems? I've updated all audio cards, drivers, etc. I am running Windows Vista.Thank you.Hi thebuell4,
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.
Method 2: Install the latest software/drivers for the lifecam.
http://www.Microsoft.com/hardware/en-us/d/LifeCam-HD-6000-for-notebooks
Method 3: Follow the steps in the article.
Image of LifeCam guard auto setting very frequently
For reference:
The problems of compatibility between LifeCam and other programs
-
Should what product I use to create and present a series of modules with text, audio and video? As a super duper powerpoint?
I think you could use DW, but it would be browser based and you need to understand a lot about html, css and javascript to do. Adobe Captivate seems closer to what you want: http://www.adobe.com/cfusion/search/index.cfm?term=buy+captivate&loc=en_us
Is not part of the subscription of cloud creative and is 1000 US $ or $29.99 / month on its own...
-
Somehow, I have disabled the feature that allows to drag and draw audio and video tracks on the timeline to other titles or positions of import. Is the only project that was hit, and everything that I can think is that when executing some other keyboard shortcuts, I accidentally performed a shortcut that turned this feature off.
You want to say, "Snap"? Press "on the keyboard, or press the snap button in the timeline panel.
-
iMac 7.1 displayport switch audio and video?
Hi all
My family would like to connect his iMac 7.1 2.4 Ghz Core2Duo until his TV downstairs, and I was wondering if the displayport located on these iMacs can transmit video and audio through, if we were to get a displayport HDMI adapter. Thank you
The computer is about 10 years old, this vintage iMacs didn't have the ability to cross the Mini DVI audio & video port. The computer would need to discreet cables for audio and video.
-
Final Cut Pro has a higher resolution audio and video to iMovie?
Final Cut Pro has a higher resolution audio and video to iMovie?
IT can have. If you put in higher resolution to begin with.
-
Satellite C650-152: Audio and video started to jump after software update
Download the latest BIOS updates and as requested my laptop network card, and now all the audio and videos, including on the internet, jump every few minutes.
Really annoying as didn't have the slightest idea on the computer technical stuff and it doesn't seem to be in any way ask Toshiba support.Any help would be appreciated, I have a Satellite C650-152 with Windows 7.
Hello
Go into the BIOS (F2 when starting the laptop) and in the BIOS the BIOS default settings.
Press F9 for default settings.
Save the changes and restart the device.May I ask if this product just streaming audio or video from the internet or have you noticed that play audio and video files stored on the HARD drive?
-
Satellite A80: How to restore the audio and video codecs?
How to restore the audio and video codecs that are installed by default on my Satellite A80 with XP Home edition?
I removed the safe mode, due to a problem with the Pinnacle Codec installed by Pinnacle Studio 10.
Now, I need to put the video standard in audio codecs.
I already downloaded the Microsoft Mediaplayer codec package and video sound new fr in Media Player.
Unfortunately I have always its program to diagnose Toshiba during the test of its Midi and Wave.
System Restore came with the message that the restoration was not possible because no changes had been made.Post edited by: roel
Hello
Try to use the tool "system restore."
This application restores the operating system to the beginning.
Maybe it will work. -
Satellite Pro A120: DVD/CD burner does not burn audio and video files
Hello
I have the Satellite Pro A120 with a cd/dvd burner MAT * a uj-8415. It works very well with data Brüning, but...
When you try to burn the MP3 files or video files on DVD or CD/r or any type of audio file, it suddenly gives me an error message telling me that the cd can no longer be used.
I tried hole Sonic (RecordNow), through Nero 6, and also directly by dragging and dropping files, but all was in vain. This MATI * a uj-8415 machine has also made the same error while burning a DVD double layer.
Again, the unit reads all types of CD and DVD and writes also all types of files with the exception of the audio and video.
Can you help me please to solve this problem?
Hello
I know that some mp3 files and audio are protected against copying and burning on different CDs or DVDs so could not work? ¦
Other reasons why you can't write these files to CD or DVD is simply a problem of compatibility between the STRANGE and the CD or DVD.
According to my experience, not all CD or DVD is supported, and these compatibility issues are not really rare.I also have another idea.
Have you heard of burning of problems caused by the bad registry entry? I mean the upper and lower filters...Please check this doc MS:
http://support.Microsoft.com/kb/270008/en-usCompletely remove the Upperfilters and Lowerfilters from the following registry key values:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}.. .and see if it helps.
-
Podcast app not explicit audio and video podcasts on Appletv 4 (gen)
IS their a fix for this problem. Podcasts audio and video podcasts play fine. When I try to play or to subscribe to a podcast with content explicitly. A warning, it does not support explicit content.
Podcast app won't play all content explicitly. And you can't subscribe to a podcast with explicit content.
-
someone at - it audio and video drivers for a HP m7170n?
someone at - it audio and video drivers for a HP m7170n? We had to climb a new hard drive and there was no disk backup with the driver information.
Thank you!
Yes, I understand your point.
I'll assume you have XP Media Center Edition, which was the operating system that is provided with your PC.
The specifications of your system also specify that your PC comes with the video card ATI Radeon X300SE, correct?
Below should be XP video drivers you need for this card:
You can download the complete driver of features and software catalyst control center (the first download listed, or simply the WDM (Windows Driver Model) driver (without the catalyst control center software).
Paul
-
Windows XP - installation of Realplayer changed audio and video icons
Running XP Home on my laptop. I installed Realplayer and all of a sudden all the audio and video elements icons have changed.
I went into preferences/Options in Realplayer and Windows Media Player to select the default reader for WMP files, and while files now open with WMP, the icons are still those changed.
In the past, the minute I change associations (i.e. the value of the default WMP player), the icons changed as well, but it doesn't now.
How to restore the original icons, i.e. If a file is associated with WMP, how can I get the icon to show that it's a WMP icon?
Thank you
Hello
I suggest you perform the steps described in the document and see if it helps.How to change or choose the program that starts when you double-click a file in Windows XP
http://support.Microsoft.com/kb/307859If the problem persists, I suggest you to uninstall Real player and see if it works.Once the icons are back to normal, reinstall Real player and check.I hope this helps.
Maybe you are looking for
-
Flash hangs using Firefox mode full screen
When you try to view full screen videos, I get a message that Adobe broke down. I uninstalled and reinstalled Adobe and using current versions of Firefox. This problem doesn't seem to appear with IE.
-
How can I get a report printed from my call history?
I'm in California, and my fiance is in the Philippines. In its Visa approval process, they want proof that we really each other. They want copies of the letters that we sent to each other. Basically, I didn't send any letters because God was walking
-
How to digitize records old vinyl record albums?
Hey everybody... I am trying to record some old albums vinyl to a USB... not having luck... is it still possible to do?... can't find a way to get it on a disc either... Thanks in advance... tj
-
The Surface will have the ability to run Windows like Word and Excel programs?
The Surface will have the ability to run Windows like Word and Excel programs?
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: #Hi, some of the icons on my desk are covered with a magnifying glass. It is very distracting, why is it there & how can I remove it plea