synchronization, and start the application met problem?

Similar Questions

• [ERROR] Package failed: 2 "download and start the application.

  Hi guys I started updating an older application now that I finally have my Z10 again. I opened the proyect of my old projects and intalled the new SDK.

  It opens and debugging-uploads it to the device without any problem, but trying to release the app it gives me this error.

  Packaging failed:2
  Info: Package created: D:/Dropbox/BlackBerry Apps/ndk-10.0.9-workspace-2/STC_Metro/arm/o.le-v7/STC_Metro.so.bar
  [ERROR] MANIFEST.MF: Invalid value '1.1.0.5.2' for attribute 'Package-Version'.
  [ERROR] MANIFEST.MF: Invalid value '1.1.0.5.2' for attribute 'Application-Version'.
  

  I'm stuck in the present and can not find the MANIFESTO. MF or the solution.

  Please guys help out me.

  I add descriptor the.xml file.

  
  
  http://www.qnx.com/schemas/application/1.0">
  
  
  
      
      com.example.STC_Metro3
      1.1.0.5
  
      
  
      
      es
      buildnum
  
      
  
      
      
  
      
      The STC_Metro application
  
      
      
  
      
      Persona
      gYAAgHCYEOJgie4dpCutABir7Gs
      core.media
  
      
      
  
      
          true
          none
          false
      
  
      
      
         
         icon.png
      
      
         
      
      STC Metro Mexico
      
         armle-v7
         STC_Metro
      
      
         Qnx/Cascades
         armle-v7
         STC_Metro.so
      
      
         armle-v7
         STC_Metro
      
      
         x86
         STC_Metro
      
  
      
  
      assets
  
      
      
          
      
      icon.png
  
      
      run_native
      
  
  
  

  You must use that three version numbers the 4th is handled separately as a build number and is optional.

  Momentics would normally put a red cross indicating an error in the xml file if you try to add more than three?

  Try to reduce to three and see if it works.

• How to make a popup of General Conditions and start the application later

  Hello

  Make a popup terms without white background my static main (String [] args) branches off to an instance of the Application to display the context menu.

  The user then hits accepts the T and C, and then my GUI application should start.

  What I did to start the GUI is to plan the same application and then exit. The next time static hand (String [] args) starts I then branch to the UIApplication and launch my main application.

  It works, but the time for the app restart must be at least 5 seconds.

  Is there a better way to display a popup T and C without white background, and when the user accepts the popup, the GUI starts?

  I can't believe that I fell for it, but...

  I want to dedicated this to all non-believers out there:

  package mypackage;
  
  import net.rim.device.api.ui.UiApplication;
  import net.rim.device.api.ui.component.Dialog;
  
  /**
   * This class extends the UiApplication class, providing a
   * graphical user interface.
   */
  public class MyApp extends UiApplication implements Runnable
  {
      /**
       * Entry point for application
       * @param args Command line arguments (not used)
       */
      public static void main(String[] args)
      {
          MyApp theApp = new MyApp();
          theApp.invokeLater(theApp);         
  
          theApp.enterEventDispatcher();
      }
  
      /**
       * Creates a new MyApp object
       */
      public MyApp()
      {
  //        // Push a screen onto the UI stack for rendering.
  //        pushScreen(new MyScreen());
      }
  
      public void run() {
  
          pushGlobalScreen(new Dialog(Dialog.D_YES_NO, "T & C", 0, null, Dialog.GLOBAL_STATUS), 1, MyApp.GLOBAL_QUEUE | MyApp.GLOBAL_MODAL);
          System.out.println("This line should be printed only after the dialog is closed");
      }
  }
  

  Remember that you should check the user input and respond accordingly.

  E.

• What configuration is required to start the application of P6, if deployed manually in weblogic?

  
  Hello

  I had faced a number of question time but did not have a solution yet.

  If I create the weblogic domain and deploy p6 web application manually and start the application, it becomes active.

  But when I tried to open it dosen't work. (I had faced this a lot of time problem)

  If I deploy the web application to p6 P6 itself create the new domain weblogic or existing user, installing it deployed and works perfectly well.

  I think that if we deploy P6 manually, you must configure something in weblogic.

  Can you please help.

  You can see the configuration guide for P6 EPPM manual for appropriate versions. Link below is 8.3. This will tell you the requirements for manual deployment.

  http://docs.Oracle.com/CD/E40266_01/English/Install_and_Config/Admin_PDF_Library/p6_and_weblogic_config_guide.PDF

  Thank you
  Sachin Gupta

• When I try to run Age Of Empires with the CD in, I get a message "Please insert the right CD-ROM, select OK and restart the application.

  Former title: Trouble running games CD, post installation under Vista. That is to say 2 AoE, Warrior kings.

  I have vista on my laptop, I installed games like shogun and medieval total war and they both work perfectly, I tried to put it on the age empires and warrior kings: battles who are also on a cd format, I installed the last but they usually run after that. Although the instialltion is over, I get asked if I wanted to leave the program to run as administrator. : s

  DVD/CD drive recognize there is a disc, but does not work automatically. I can't install the program normally when I run the setup.exe for the game. When I try to run the program with the CD in, I get a message "Please insert the right CD-ROM, select OK and restart the application.

  I tried to run them in compatibility mode, using all variants. and also I tried soome of advice from the help article about the disk drivers. game discs are clean and one striped.

  Why can I install the program and access the drive to use the files it contains, but then not use the disk?

  Hello
   
  
  This problem may occur if one of the following conditions is true:
  a. you do not use the game disc to start the program.
  b. the CD player is not compatible with the program.
  c. using a copy of the program CD.
  d. you are not connected to the computer as an administrator.
  e. the programs interfere with the start of the game which is running but is invisible to you.
  f. the CD-ROM drive uses out-of-date drivers.
   
   
  I would ask you to try the methods listed in the article below:
  Error message or the game stops responding on the "Loading" screen when you start a Microsoft game: "insert the right CD.
  http://support.Microsoft.com/kb/228985/en-us
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.

  I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium.  I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them.  The test seems to be hanging around 21% so I don't know how well it will do

  Hi A1W1LL,

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If you are not able to boot to the desktop, you can try to restore your computer from WinRE.

  1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press any key when the message "Press any key to boot from CD or DVD".
  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
  4. click on repair your computer.
  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
  6. in the System Recovery Options dialog box, click System Restore.
  7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
  8. click Finish to restore the system.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• BTTray.exe, error to start the Application.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:BTTray.exe, error to start the Application.

  • Programs that you have problems with the Bluetooth does not work overwhelming
  • BTTray.exe, Application error messages start error.
  • Recent changes made to your computer: just updated to windows update
  • What have you tried to solve the problem, I tried to look at Windows Update and also send mail to Microsoft

  Read the following article to see if it helps to solve the problem: http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?c=us&dl=false&l=en&s=gen&docid=6CF68D431EAAB41BE040AE0AB6E16686&doclang=en.

  Are you still using the BTTray?  If this isn't the case, we can solve the problem in a more easy way.

  Go tohttp://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and run Autoruns and click all.  Search bttray.exe or mfc80.dll and when you find it uncheck the box to prevent it from start to start.  Check the entire list as there may be several entries.  When you're done, click OK and restart.   The message should be gone.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot start the application... Error code 13

  I installed my real application in device playbook by using the debugging token. Request worked fine.but nw am not able to open the application. "Cannot start the application...". Error code 13 shows this error message while trying to open the application... .i don't know what to do...! Help, please...!

  Thank you

  I had solved it. It was the problem of token bug. It was expired while I have created a new and run the application .nw, it works very well.

• BlackBerry Smartphones BlackBerry Maps is loaded on the NEW Bold 9700, but there is no icon to start the application

  You just bought a new Bold 9700.  I ran all of possible update.  BlackBerry Maps IS loaded (v5.0.0).  The operating system is the most recent.  I see BlackBerry Maps in applications of the add-on, but there is no icon to start the application.  The seller is completely useless when it comes to helping solve the problem.  The GPS seems to work and provides the correct location data, but I can't find a way to start the BlackBerry Maps application.  What gives?

  GPS still works on the device, even without BlackBerry Maps.

  Try Google maps. Free.

• Workstation 7.1 - using "nogui" option to start the VM - having problems

  Hello

  I am running some automated install testing and am finding that won't start all the processes that are supposed to start once the installation is complete.

  I'm X product installation on a virtual machine Windows Win7 64 bit which was started by an automated script using vmrun... start with nogui option.

  After producing X has finished installing, fileX.exe is supposed to run and start the process of silica and launch a toolbar on the virtual machine.  This is not the case.

  "Nogui" also affects this toolbar to launch?

  Any idea is appreciated

  Thank you

  Hi JerriM,

  I took a quick glance through your script, but I don't know Robot management.

  Let me give you a quick description of some vmrun options that could help.

  To start vmrun-

  nogui: this shouldn't affect what happens in the virtual machine. It is to determine if the virtual machine, when consumed, does within de VMware Workstation user interface, or if it runs in the background on the host computer.

  For vmrun runProgramInGuest -.

  Interactive: I think that's the problem. When you run a program using vmrun, by default it is started by a service Windows running inside the guest. On Windows Vista and later versions, the services have not access to any office user environment. They exist in some hidden Office. So, no matter what UI start by these applications will be never visible by the user. If you need start a program that must interact with directly (via the console/customer display) then you should use the "-interactive ' option. However, this requires that the user account must be connected to the Windows desktop computer (such as through the screen when Windows starts connection); the easiest way is to activate the automatic connection, so that the account will automatically connect.

  noWait: This makes output vmrun earlier program in housing starts comments, rather than wait for it to come out.

  activeWindow: This makes the program run in the comments, if it is a user interface, start with a non-minimized window.

  Let me know if it helps.

• Satellite A500 / 01 K - Web Camera error: "couldn't start the Application.

  I have a satellite A500 / 01 K running under Windows 7 64-bit. I get an error when I try to use my webcam; "Application has failed to start because the side-by-side configuration is incorrect." I tried updating the driver through the Device Manager, and I tried redownloading and installing the application on the Toshiba site, nothing helps.

  Hi balooneybob,

  You get this error message if you want to use your webcam with webcam application or another program like Skype example?

  The webcam is listed correctly in the Device Manager?

  Before using the webcam with Skype or another messenger I recommend to close the Toshiba webcam software. You can only use the webcam with a program only at the same time.
  ?

• installed the game CD Gears of War on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.

  original title: Gears of War for PC (Vista)

  I installed Gears of War game CD on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.  I've been on the net and does not know what is the problem and why this game will not run.  I've installed, uninstalled, reinstalled tried to run as administrator, got the latest patch, all the things that have said all sites to do - anyone have any ideas?  Any help would be appreciated!  Thank you!

  Hi NoOneSpeciale,

  It is very possible that your CD may be damaged.  Is it possible to get another copy to try on your machine? Or try this copy on another machine to see if it works or not.
  Also check in control panel--> system--> for you Device Manager make sure that there is no yellow/red icon next to the CD player and it's function correctly.

  Let us know the result, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please

  When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please
  use widows xp

  Hello

   
  1. Have you tried to Hibernate for ever in the power settings option?
   
  To resolve this problem, you can follow the steps below.
   
  (a) click and start
  (b) type power Option in the start search bar.
  (c) now select click Change plan for the current plan of the selected power.
  (d) now click on advanced power settings.
  (e) scroll down and click on the sign more next to sleep.
  (f) now click on allow the eve hybrid and turn it off.
  (g) click on the option put into hibernation after and set it to never.
   

• Installed wireless Belkin, unable to see network, get error windows cannot configure this wireless connection and starting the WZC abuse

  Hello

  I have a belkin wireless router that worked on my primary computer and a portable computer for years.

  Recently, I moved my main computer and now it dosnt seem to work. Belkin is installed but when I ask to see available networks, it says that windows cannot configure this wireless connection and starting the WZC abuse. Belkin still works fine on my laptop so I know no there is not a problem here. Can someone help me please? I tried to type in %SystemRoot%\system32\services.mcs\s as with a question of people, but all I get is windows can't find this.

  Any ideas please?

  Thank you

  * original title - Help... problem with belkin wireless *.

  Let's see if I can cut through it.

  You wrote:

  Click the Wireless Networks (see this picture) - I did

  Is the box 'Use Windows to configure my wireless network' checked or unchecked? There is no such box.

  I connect using - he says belkin. another box saying this connection uses the following items. then underneath there are 3 tabs - install, uninstall and properties. If I press on properties it says name provider and in this box, it says windows index.

  It seems that you don't have not clicked the "Wireless networks" tab, after you open the properties of your wireless adapter.  From your description, you look at the 'Général' tab: click HERE to see the "Général" tab Click HERE to see the 'Wireless Networks' tab.

  There are 5 columns: name, description, status, startup type and log as.  The values for the last 3 columns should be started, automatic and Local System - on my screen there are 4 tabs at the top - general, connect you, recovery and dependency.

  You skipped a step... 5 columns are in the 'Services' window initial... you arrive at "4 tabs at the top", AFTER you double-click the Wireless Auto Configuration.

  Status of the service which includes 4 boxes. stop suspend and resume. the button highlighted in the start menu

  Just to the right of the expression "Service status", you should see a Word.  On your system, this word probably is "stopped."  The 4 buttons (boxes) are how to control the service.  Because you said that the highlighted button is 'start' which means that the service is currently stopped, and you will need to click on this button "start" to start.

  I strongly suspect that you had used the Belkin utility to control your adapter - and now, you also started WZC.  As I wrote above, you can have both running at the same time.

  When you click the icon of your "Belkin", do you have a screen that looks like this: http://www.wi-fiplanet.com/img/2006/belkinn1/08.jpg

  If so, you should return to the utility Services and 'Stop' the automatic configuration service.  If you want to use WZC instead of the Belkin utility, see http://en-us-support.belkin.com/app/answers/detail/a_id/40/related/1

  I'm not familiar with the Belkin Wireless networking utility, but many wifi manufacturer utilities can be used to turn your wifi on and off, then maybe your was off (the adapter on your computer - not the router).  If you identify the model of the card you have in your main computer, I'll see if I can find the manual on the Belkin website and maybe give you a little more information.

• Cannot start the application - error code 8

  I'm running one of my own apps and I get this message:

  "Cannot start the application - error code 8.

  What is the error code 8? Where can I find a list of all error codes?

  Thanks in advance

  If you get error 8 or 13, and that everything you did is OK for this:

  -Uninstall all versions of your application

  -Restart the playbook

  -Install and run again