Synchronization fails when you start MotoCast USB

Similar Questions

• Progress bar hangs, also when you start in safe mode

  My MacBookPro (2008 with SSD Samsung built in by me) showed no problems when upgrading to El Capitan. But now I can not start (OS10.11.4). The progress bar freezes, also when you start in safe mode or you try to start in recovery mode or trying to boot from a USB stick with OS 10.11.4.

  Who can help?

  Start - computer stops or delays

  Resolve startup problems-

  Resolve startup problems - (2)

  Resolve startup problems - (3)

• Satellite M30X powers off the power when you touch the USB port

  Hello everyone, just registered and it is the first problem:
  As there is no general hardware forum, I post my problem here.

  I got it twice, my laptop
  (Product: Satellite M30X, Version: PSA72E - 008010GR) just went completely off.

  Motherboard:

  NorthBridge: Intel i855GME
  SouthBridge: (ICH4-M) of 82801DBM LPC Interface Bridge
  Motherboard model: Toshiba EAL20

  USB:

  82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI controller #1-3
  Version: 1.0
  Interface: UHCI
  Frequency: 48 MHz

  82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI controller
  Version: 2.0
  Interface: EHCI

  I have the latest Intel Chipset drivers installed and Windows XP Home SP3 with all updates.

  Once when I hit just the back USB ports with a USB plug, the other time when I unplugged my bluetooth key (climbing din't remove it).
  There was no blue screen or message of any kind, not even in the registry after you start the system again or this fatal system error box when you start after a system error.

  Just a total failure. But it works fine the rest of the time. I also tried to remake the script, but it didn't work.
  I have cleaned with a vacuum cleaner to remove dust and has taken a good look, but saw no difference to the side track.
  Maybe the clamps of the wand to shield a little more out to the contact pins on the rear.

  What bothers me a bit, it's some time ago, I had the laptop one computer my knees and I forgot that a memory stick has been connected to the rear. The stick was pushed up and was slightly damaged.
  Still works well. Now for me, that I broke the USB port Insider somehing.
  I could not determine also the loose parts or unfirm at all.

  Y at - it there, diagnostic software that measures the motto of the port or power problems?
  I have a multimeter, fetch short-circuits with it?

  I saw a package of drivers Intel for USB 2.0 over there, but I can't find it on their page, advice?

  Thank you very much for your help, I just wanted to update my RAM and now I am not so shure if my laptop will last the next week.

  Fabian

  Hello

  I put t know any diagnostic software that could analyze this question, I think that a technician of the ASP may be able to provide exactly this question results

  > What bothers me a little is that some time ago, I had the laptop and my knees and I forgot that a memory stick has been connected to the rear. The stick was pushed up and was slightly damaged.

  I think this might be the reason why the laptop stopped while you touch the USB port eventually ports were damaged by using the memory stick, this could cause the laptop off

  However, what we can do is to provide some suggestions and assumptions
  It you want to know why this is happening exactly, then you need to contact a technician laptop for a control.

• Error loading C:windows\mstapox.dll, when you start Windows XP

  Originsal title: error loading

  When starting, I get the following message: error loading C:windows\mstapox.dll

  Does anyone have a solution?

  There is no file with this name in XP.

  In addition, there very few dll that must be load in the c:\windows folder and is not one of them.

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  If that's really what you see, then your system is now or was hit by malware.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Can I save to file or print the global contacts in Thunderbird. Not only the contacts but all contacts that indicate when you start to fill out an address to send to.

  There must be a file somewhere in Thunderbird for all of your communications by e-mail that stores the e-mail addresses of everyone. When you start typing an address you will display a list of people with whom you communicated with in the past. Many of these people are not in your contact/address file. I want to somehow extract this file to Thunderbird.

  You have two default address books. The personal book where you add contacts and the collected book which keeps information for messages that you send.
  So you're looking for the collected address book.
  When you open the address book window, you should have your books listed as folders on the left margin in the directory pane. If the pane is not displayed, select View-Layout and click on.

• Firefox build 17.0a2 when you start to customize, FF crashes

  17.0a2 build Firefox hangs when you start to customize

  It's the build directly from

  http://Mozilla.debian.NET/ experimental iceweasel-aurora, I'm doing a daily distribution update, when there is a change in the pension, I get it.

  I went into safe mode and the problem was not there. I returned in mode normal and disabled all my Add ons. I restarted each one (with FF) and seemed to have eliminated the problem.

  I can't have his failure...

  Thanks for your help

• How can I get rid of the box that appears when you start Firefox 'Restore previous Session'?

  How can I get rid of the box that appears when you start Firefox 'Restore previous Session'?

  Subject: House is the default in Firefox 4 home page - look at the address bar containing the addresses of web page - it is the container for Google search, with a 'extract container' and below these elements is the Previous Session Restore button. It's not the same homepage that previous versions of Firefox used (although it is similar in appearance), it is a 'local' page that won't load the Internet.

  Set this page as your home page, which is what Firefox 3.6 and earlier versions had for the default home page. He has Previous Session Restore button/link.
  
  http://www.Google.com/Firefox

• Satellite Pro M70: disable the touchpad when you use a USB wireless mouse

  I want to disable the touchpad when you use a USB wireless mouse. Can someone tell me how to do what you please?

  Hello

  Open the control panel-> mouse. There should be an option to disable the touchpad.

  Good bye

• Satellite A60: Sound quality poor microphone when you use the USB phone

  I have problems with the microphone/recording quality on my A60 including but not limited to situations when you use a USB phone. Talk to the USB phone produces a lot of static when it is used with the A60, which is not the case when I use another laptop.
  The two laptops have the same VOIP software and "simplyphone.

  Any ideas what could be the problem? Drivers?

  Toshiba support suggests to see if a system restore will improve things, but I am reluctant to go there for a questionable result.

  Hello

  I don t think that the driver update will help you. The operating system uses the simple common Microsoft USB drivers. I think we should get the problem somewhere else.

  You can try to disable the power save option in-USB hub-> properties > Device Manager. I noticed that if energy saving is enabled on ports USB some external devices could not work with maximum efficiency.
  In addition, you should disconnect other USB devices during the test the USB microphone.
  I think that it of not impossible that some external USB devices might have a negative influence on the use of a USB microphone.

  PS: I found a site interesting on tests of micro USB
  http://www.voicerecognition.com.au/dragon_microphone_review.htm

• are there ways to make winXP auto detect and pair up headset/bluetooth headset when you start?

  are there ways to make winXP auto detect and pair up headset/bluetooth headset when you start?

  Hi tang kok Wee,

  ·         What is the service pack installed on the computer?

  You can see the below mentioned Microsoft Knowledge Base artcle and follow the steps. The next time you connect the device to bluetooth headset, it will be found automaticlly.

   

  How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/883258

  Let us know if that helps.

• e-mail does not appear when you start outlook express/is accessible only when iI click on Inbox in the folder list.

  I use Windows XPO professional and Outlook Express 6.

  Otherwise, how do you mean "emails should display"?  I don't understand the problem then.  What do you expect when you start OE?

  If it is not directly in the Inbox, you can have corruption and you can go to file | Identities and setup a new identity.  Then see if it works.

  Steve

• Computer stops responding with a black screen when you start Windows XP. Cannot select anything advanced startup options

  Original title: can't open Windows
  I can't open my laptop at all... block when I select anything in the mode without failure or screen black normal mode :(
  What should I do? Thank you!!!

  Hi Mihou,

  1 have. what changes you made before the question?

  2. What are the options you see in the advanced startup options?

  You can follow the methods in the article in order to solve the problem.

  Computer stops responding with a black screen when you start Windows XP
  http://support.Microsoft.com/?kbid=314503

  Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Computer stops responding with a black screen when you start Windows Vista

  Computer ceases to respond with a black screen when I run Vista, this happen right after the installation of updates. original title: computer stops responding with a black screen when you start Windows XP__

  If you think that Windows updates are loaded:

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  MS - MVP - Elephant Boy computers - don't panic!

• How do access you the list of programs that start when you start your computer?

  How do access you the list of programs that start when you start your computer?

  Saturday, January 19, 2013 19:48:16 + 0000, Psylly wrote:

  How do access you the list of programs that start when you start your computer?

  First of all, note that you should be concerned all the programs
  starts automatically, not only those who enter in the system tray.
  Not all the programs auto-start manifesting by an icon in the
  Status bar.

  On each program, you don't want to automatically start, check its
  Options to see if he has the choice of not start (make sure you)
  Indeed choose not to run, not just a "don't show icon.
  Optional). Many can easily and better be arrested like that. If that is not
  work, run MSCONFIG from the start. Run the line, and then click the Startup tab.
  Uncheck the programs that you do not want to automatically start.

  However, if I were you, I wouldn't do it just for the application of
  the minimum number of running programs. Despite what many people say
  You should be concerned, not with the way that a lot of these programs
  you run, but who. Some of them can degrade performance severely, but
  others have no effect on performance.

  Don't stop all programs to run willy-nilly. What you need to do
  is to determine what each program is, what its value is up to you which
  the performance cost is its running all the time. You can try
  Internet search and ask questions about the details here.

  Once you have this information, you can make a smart informed
  decision on what you want to keep and what you want to get rid of.
  Ken Blake, Microsoft MVP

• Screen go to the desktop when you start typing.

  Several times when you type in Windows 7, when you start typing an email or starting to fill in a field of research, the screen goes to my office.  As soon as I move the mouse it go back to the form I was typing.  This happens on both computers I have with Windows 7.  Any suggestions as to why this is happening?

  You can try to disable the preview of the arrow,

  Right-click the taskbar and select properties and uncheck the box at the bottom to aero peek, save.

  See if she always does.