Synchronization of a PCI-5114 with a USB-6229

Similar Questions

• Double counters in Signal Express with a USB-6229

  I have a USB-6229, which I'm running via SignalExpress, and I am trying to simultaneously record two inputs of meter.  However, it seems that he has trouble to add the second channel.  When I add the first string via signals acquire > DAQmx Acquire > counter entry > Position > angular and select ctr0 channel, he (correctly) lists PFI8 and PFI10 as inputs of channels A and B.  However, when I add the ctr1 channel to the same task (via the blue and the button "Add a channel"), he still lists the same PFI8 and PFI10 as input.

  On the other hand, if I first add ctr1 then add ctr0 Secondly, it lists PFI3 and PFI11 as A and channel B for the two entries of meter.

  How can I get the two counters operating independently?

  Thank you

  Josh

  He realized that I can't run two meters of a single task in Signal Express (unlike, say, two analog inputs).  Once I added it as two separate tasks, everything works fine.

  Now I have problems of synchronization.  Looking through these tips and documentation, it seems that I will not be able to fix this via SignalExpress, so I continue in LabView.  I'm having some problems with it, but I'll post in a new thread here.

• Linux drivers for the acquisition of data USB-6229

  I would use a USB-6229 with Linux and support driver selection guide said that this model is not supported.  However, the 6218 and others are supported.  Is it possible to use 3. 5B pilot defined for a USB-6229 with reduced functionality?  Is it possible, with some basic Linux knowledge codification driver of change 3. 5 b drivers to work with a USB-6229?

  Kind regards

  Craig

  Hi Craig,.

  That is right.

  Best,

• PCI cards with USB 3.0 or eSATA for a Mac Pro 2006 (1,1)

  Hello, Apple people!

  I got my hands on a Mac Pro 2006 earlier from a friend. I used it as a BESTIAL Server (seriously, this thing is not so much as breaking a sweat even when I throw it the more difficult task.) I love this machine) since I got it, and I think I want to do the updates. My plan so far is to get multiple mounting OWC to pick up the second drive Bay currently vacant DVD and install two 120 GB Samsung 850 EVO drives in RAID 0, while using the real HARD disk bays for a RAID 10 array (nested RAID: two RAID 1 arrays brought together in a RAID 0 array) of four 2 TB red WD drives and use two 250 GB hard drives currently in the machine in an external case in a matrix RAID 1 for backup. I'm pretty happy on this issue.

  My question concerns what interface to use for external drives of 250 GB. I can use:

  • USB 2.0 currently on the machine
  • FireWire 800 currently on the machine
  • a PCIe USB 3.0 card
  • a PCIe card with eSATA

  That we will get the faster speeds? I know that, theoretically, eSATA would get faster speeds (6 Gbps eSATA vs 5 Gbit/s USB 3.0 vs 800 Mbps, Firewire 800 vs 480 Mbps USB 2.0), however I know also (maybe?) that the Mac Pro I have only has grooves in v PCIe 1.1, with a (supposed) 250 MB/s maximum data transfer rate. would this bottleneck a PCIe USB 3.0 or eSATA card not worth?

  Note: don't worry all "Mac compatibility" with PCIe cards (or the table RAID scheme I mentioned). I am running Ubuntu Server (64 bit) on the machine, and given that the Linux kernel supports much more conductive than Mac OS X, I probably don't need to look at all the other drivers. This issue is specific to the hardware capabilities of the Mac Pro.

  Probably the most simple installation, you can do is to install the eSATA extender cable adapter.

• PCIe-7852R and OR USB-7856R OEM Calibration with Calibration Executive

  Can I calibrate PCIe-7852R and NI USB-7856R OEM with NI Calibration Executive?

  How?

  Our version of National Instruments Calibration Executive Software is 3.5 and it has no procedures to OEM PCIe-7852R and NI USB-7856R products.

  Hello

  There are several ways to calibrate your instruments.

  First of all, the help file for the calibration of R Series devices to the Calibration Executive can be found by navigating using the Executive of Calibration > calibration device > data acquisition (DAQ) devices > NI dynamic signal Acquisition > NI R series calibration procedure

  You can also follow the instructions in the following document.

  http://www.NI.com/PDF/manuals/372004d.PDF

  Finally, you can also calibrate your software for the R Series devices using the calibration installed with the drivers. You can get "calibrate the device 78xxr" and run the executable file to calibrate your devices.

  Thank you.

  Kind regards

  Nigel

• BlackBerry smartphones can not synchronize with the USB cable plugged into charge pod

  Hello

  I read on the web site of shopblackberry.com, in the details of charge pod ( http://www.shopblackberry.com/_blackberryaccessories/cgi-bin/pd.cgi?frompage=category&page=product_d... ) that the pod can handset with charger travel or data cable for charge and/or sync with a BlackBerry smartphone. So, my question is related on a problem or a misunderstanding of me to this description.

  I want to know if we could recharge and synchronize the BlackBerry via USB cable or is only responsible for the BlackBerry when connected that way. My second question is, is it possible to synchronize the BlackBerry with the USB cable plugged into the pod or not?

  Because I got a request from one of my users about the fact that his BlackBerry 9000 can not synchronize when it is on his group.

  Thank you very much!

  Hello

  It's a loading dock. It is useful, because just drag you your "BOLD" in there and it will load (just like the 8300 Curve).
  If you want to synchronize, you can plug a usb on the side of the appliance cord. This can be done while the machine is in its dock, where the description.

  I have the same crib, but for the 8300. It's really worth buying. I'm happy with it every day.

• Question - the upgrade with 3 USB card and esata

  I have an early 2008 Mac Pro Quad core 2.67 going to have maxed out RAM soon and are planning to get a couple of 2 TB seagates Macgurus. I'm a little embarrassed by my lack of knowledge, but I'll put my questions over there anyway. Last year, I bought a 120 GB ssd card Accelsior PCIe mercury OWC - not being aware of the s and outs of things, but I knew it wasn't a port multiplier with two external esata ports. so my question is this: since I have to live with this card can I connect the esata ports to discs in separate outdoor pens and then through disk utility make a raid 0 set, and what size of disc must be effective for the cost the least?  I intend to get a USB 3.0 also so that I can use this speed also.  My other plans must be a drive of fusion with the ssd 120 on the map of Accelsior with a disk of 1td existing in my drive for the system Bay and replace all small readers of seagate more big HARD drive and I'm wondering if the 2 TB is the largest capacity I can use internally. I am on a very limited budget so that's the reason why I'm thinking hdd and if there is someone with advice on a card USB 3 I would appreciate your comments - in fact, I would be happy to comment on everything I mentioned, I'm a little out of the loop on the evolution in recent years. It is possible to configure a raid with two disks of two PPI crd esata ports would there be an advantage with drives of 2 TB or 1 TB disks would work as well for raid 0. Do I intend to put in storage for Time Machine with the USB 3 map, and what size disc would be appropriate for Time Machine? I'm not lazy and waiting for someone to find out - I did weeks of research to get to this point and I just need a little advice. I'm just going through what I know and what I can afford, but maybe I'm missing another solution to try to get a little more speed and back up storage for my photoshop files.

  I do only cc2015 Photoshop, Lightroom and On1software version 10.1 using OS X El Capitan and a cg 276 Eizo monitors more a second older Eizo. My usb ports 2 are all used and I rarely use a firewire port. Thanks in advance to all those who have advice. This is the first time that I have not posted anything on this forum

  Time machine is a USB 2 connection. No real reason for a USB 3 connection.

  There is no RAID in disk utility in El Capitan. Apple dropped the disc utility in El Capitan. However, you can still the Terminal commands to configure RAID.

  https://www.reddit.com/r/OSX/comments/3d7aw2/does_el_capitan_disk_utility_suppor t_raid.

  You should be able to create a set with eSata RAID

  Here is a map of the BSE 3 compatible with El Capitan.

  http://www.sonnettech.com/product/allegrousb3pcie4port.html

  USB 3.0 Mac Pro 2008 El Capitan

  Make sure that the card said it works with El Capitan. Some cards USB 3 is no longer with El Capitan as the CalDiget of first generation card.

  Internally the Mac can also use large HD depending on availability. However, there is a bug that first appeared in 10.8.4 and has not yet been set. To format a plu 2.2 to internal HD:

  -Use a disk utility of all Mac OS X older, including the 10.6 DVD (if your Mac can boot from it) or any of the installation DVD player or boost saved work.

  -Another solution is to move this drive in an external case and delete it there (assuming your case is modern enough to deal with readers more than 2.2 to.

  In addition,

  To sled mounting internal:

  The penetration of the screw depth for 'down-screw mount adjacent to the platters' on some readers from over 3 TB have been shortened. This may mean that the live sled down until they adjust and begin to compress the washers on the sled. If this is the case, your drive will not rest flat on the sled and do not breed with the connector backplane without additional adjustment.

• PCI-5114 clicks when the trigger is changed - is that bad?

  Hello world

  I work with a PCI-5114, using several triggers in a LabVIEW program that loops each second.  At the program, I first trigger off channel 0, then reset the trigger to collect different information, this time this release out of the channel of relaxation and reading of channel 1.  It works, and I get the data I want (hooray!), but whenever the trigger changes (once per second), I hear a loud click of the PCI-5114.  Is this bad?  Switching like that ends up hurting my scanner?

  If this is not evil, I am happy to endure the clicks.  If it is bad, so I need to figure out a new way to read my card.

  Thanks in advance!

  Hello Karl,.

  Some maps of range, such as the PCI-5114, have active switches in them.  The noise you hear is the switching whenever you change your analog trigger from one channel to the other.  These switches go bad eventually after prolonged use, so I highly recommend that you stop the analog trigger behind switching, each iteration of the loop.  Once the switch has to be bad, your card will be sent repair.  Instead, you can look into using one of the PFI lines as trigger instead.

  Kind regards

• Agilent E3640A PSU with GPIB-USB-HS

  Hello all, I created an Agilent E3640A power control software standard interface GPIB. It works very well. Now, I want to replace the standard GPIB interface (with GPIB card) with GPIB-USB-HS adapter cable, so that I can send commands via USB connection, eliminating the need for GPIB card. How can I use my existing application to work with GPIB-USB-HS adapter cable? Is this a change? or I completely rewrite the code, and if so, are the drivers available for GPIB-USB-HS adapter cable? Thanks Jeet

  More information please.

  Have you removed the PCI interface before you try the USB interface? If this is not the case, your program may still try to access the E3640A on the PCI card.

  What is the USB HS recognized in Explorer measurement and automation as GPIB0?

  The E3640A knows if scan you for Instruments to MAX?

  What (number) error is raised during the execution of your program with USB HS?

  It would also help if you could show us NI SPY logs saved when executing your program with PCI and USB-Interface Card

  Usually you don't need to install different drivers, because the package NOR-488. 2 installs drivers for all variants of the NI GPIB hardware.

• Synchronization of 4474 and 6733 with RTSI

  Hello

  I have some problems with the synchronization of 4474card PCI and one PCI-6733 map with (RTSI cable above). I use 4474 as HAVE and 6733 as generator of AO, and AO are interconnected and RTSI cable is plugged (and also adjusted in MAX and maps are added).

  Card PCI-4474 as a master and as slave 6733, I used the example of synchronization series M with LabVIEW and OR-DAQmx (Fig.5) - and I removed property for timing DAQmx nodes because they produce an error.

  I want to use the same clock, start the trigger and the trigger of these two cards, synchronize them as much as possible, to have a few stabile deterministic phase between them (a few small or none). But I have a problem, the acquisition with 4474 begins too late so it catches some data of the previous iteration and they don t look synchronized...

  I find a lot of messages, but there is always something different, they use the PXI, matlab... map maps...

  Please find attached the Panel front and code of program experience.

  Thank you!

  Additional information:

  -windows XP

  -labview 2011

  -latest drivers and Toolbox

  -dell PC (so the 6733 really work )

  OMNIA IN MENSURA AND NUMBER

  
  

• Problem with 2 USB flash drive in Windows XP sp3.

  I have a USB 2 pci card - USB 2 card, with the hub 7 ports (powered) USB. Sometimes, everything works fine. Most of the time I can't access flash USB dirve. Printer, scanner, camera, photo, mouse, all connected work very well. Plug the flash drive and errors occur. The flash player works fine in laptop (Win xp sp3). Difference between the two machines, the laptop has only 2 USB ports. Have tried to uninstall the USB controllers and re-setup. Flash drive works fine in the desktop integrated USB 1.1. Have checked with Kingston USB drive flash technical support without success.

  When dirve flash does not, Device Manager displays the flash player at the top of the page section of controllers USB bus, as well as generic USB (USB 2?) hub. When the flash works do not drive, hub Generic USB appears in the second USB bus controllers.
  Someone help? Please, I beg you.

  Hello

  Tried your suggestions, without success.

  Have now connected powered hub USB 2 on my edge USB 1.1, with all devices USB works fine.

  Probability of problems seems to be my pci - USB 2 card.

  Being disabled, it is very convenient for me to have the hub USB 2 powered on my work surface to facilitate the connection of my devices.

  Thanks for your help anyway.

• Error blackBerry software - synchronization failed, impossible to deal with organizing data

  I had a Q10 Blackberry last week.  I downloaded and installed the PC of Blackberry link 1.2.2.13 version.  Two-way sync USB worked fine.  Now, all of a sudden, I get the error message "synchronization failed, impossible to deal with organizing data."   I tried to reset the synchronization options, but not joy.  Also tried to uninstall and reinstall the software Link 1.2.2.13, once again no joy.  Any suggestions?

  UPDATE: I spent 4 hours on the phone and the remote session with the help of Blackberry last night.  After doing some troubleshooting to isolate the problem, determined that something on the device caused the problem of Outlook synchronization. One thing I've learned, it's that it can take a long time to synchronize and even though the progress of the screen may appear frozen, let it go until the end - sometimes it took 20-25 minutes, but eventually completed. Here's the process we went through - I would recommend appellant help BB and work with them to make sure you have not accidentally delete Outlook contacts and calendar of important information of your PC or BB device!.

  (1) we tried an uninstall/reinstall the PC Link BB software and that did not fix the problem.

  (2) to isolate the problem of synchronization.  We first did a synchronization of 2 channels 'contacts' and 'calendar' and who was a failure.  Then did a synchronization of only 2 channels 'contacts' and managed.  Then did a synchronization of only 2-way 'calendar' and that was a failure - so the problem was linked to calendar data and something on the device has been the cause of the problem or corrupted.

  (3) link BB allowing us to make a backup complete unit.

  4) then decided to do a 'Wipe security' on the device of BB Q10 to erase all the data and settings and return to a clean boot device configuration.  I was nervous about it - make double sure that Outlook all contacts and calendar data on the device and the PC are completely backed up in case something bad happens.  Nothing serious happened, but I was gald, we made the backup!

  (5) has the 'Security Wipe' feature (on the device, the settings > Security and privacy > wipe security) and phone rebooted without problems (takes a while to do).
  

  (6) then used link BB to do a sync test 1 channel 'contacts and calendar' from PC to device.  It worked without problem.

  (7) we then used BB link do a "restore" full backup of device, as we did in step 3 above.  It takes a while to make and was a success.

  (8) once the restoration of the aircraft was complete, BB link configured to perform a synchronization of 2 channels of the two 'contacts' and 'calendar '.  Does the synchronization and was a success.  Did a test by adding the new entry of the calendar on PC and did another 2-way sync - all worked very well.  Seems that the problem has been corrected, but will follow in the coming days.

  Lessons learned:

  (1) If you have a lot of Outlook contacts and calendar entries, the synchronization may take a long time.  Be patient and let it run - even if it seems stuck, etc!

  (2) save all Outlook data on the device and the PC to make sure that you have a backup something bad happened during troubleshooting.  We had not something bad happens, but I was gald we made a backup anyway.

  (2) call BB help - support person, I worked with was fabulous, even if it took some time to work through a patch.

   

• e9280t cannot start with the USB 3.0 card (tried several providers) new version of BIOS e9280t necessary

  Hello...

  I bought a new e9280t year last on the HP site complete with 9 GB of memory (now 16), Blu-ray/DVD writer & reader, tuner TV digital Hauppauge, ATI Radeon 4850 video card bi-ecrans, etc... Since then, I've added more memory and a Firewire 400/800 3 card. His running Win 7 Pro (sp1) and the BIOS is v5.29.

  I bought an external drive to USB 3.0 WD (3 TB) and a StarTech USB 3.0 card (Amazon.com). After installing a USB 3.0 card, the system would be powered on for a second then die and then do it again a few seconds later and the cycle continues until the power cord was pulled. Then, I pulled the USB 2.0 card and tried again only to have the same results. The only cards that remained in the system during the trial was the ATI card and the TV Hauppuage card.

  Thinking that the problem was with the USB 3.0 card, I bought another provider (Rocketfish of BestBuy) and installed. The same problem as with the other card USB 3.0, the system does not start.

  No software driver or other changes have been made to the system before installation tent (according to the vendor's installation instructions).

  Given that all failures occur during the power first sequence and cards have been tried with and without power tied to them, that the problem cannot be fixed with an upgrade of the BIOS for the motherboard of TRUCKEE. I could be wrong, but I'm going on 30 years of experience of material as my framework for this review.

  If anyone else has this same problem, it would be good to rally them around and see if HP notice us.

  Thank you

  Norm

  I upgraded my power supply 650w (thermal take) and it all works - USB 3 controller (Koutech Dual Channel SuperSpeed USB 3.0 PCI Express Card (2 x internal) model IO-PEU232) - he also has a SATA power connector, but it works very well with just a power bus.
  -also updates card reader (put it in the 2nd DVD Bay): internal Koutech IO-RCM630 Multi-in-1 USB 3.0 SuperSpeed Front Panel card reader with a USB 3.0 Port (3.5 ")

• I can't synchronize my new iphone 7 with itunes on my mac (OSX)

  I have an old MAC, which synced fine with my iphone 5, but my new 7 used to synchronize itunes - when I connect with cord, computer tells me phone will not allow connection - phone to ask if trust peripheral, I say trust, but failed to get the two to cooperate!

  This is why you cannot synchronize now.

  • Sync with iTunes on a Mac or a PC requires:
  • Mac: OS X v10.9 or later
  • PC: Windows 7 or later
  • iTunes 12.5 or later (free download from www.itunes.com/download)

  http://www.Apple.com/iPhone-7/specs/

• 3.0 compatible with the USB 2.0 computer USB Ext drive?

  I have been using an external drive G-Tech USB (2.0) with my old computer

  which is also USB 2.0. New as 3.0 USB drives, I would like to know

  If a new USB key which is 3.0 will be compatible. The current drive works fine

  but I want to get a second as a backup. I thought about buying a used 2.0 drive but

  I prefer to get a new. I don't mind if the 3.0 is a little slow with my USB 2.0 as

  as long as it works.

  Yes.

  (142727)