3.0 compatible with the USB 2.0 computer USB Ext drive?

Similar Questions

• "Unknown device" USB Barcode scanner, problem with the USB controller driver?

  Hello

  I need assistance with our Barcode Scanners that doesn't work on our newly purchased computers at HP with Windows7 Pro x 64 operating systems.

  The brand and model of the bar code scanner is:

  Datalogic Heron D130 USB.

  When you connect the scanner to a USB port, Windows will try to install this as a HID, but it takes an unusually long time, about 7-8 seconds, to boot the device and install the drivers and appears as an unknown device in windows "devices and printers" and the hand scanner does not work.

  Sometimes when you move the USB back can I sometimes the scanner at hand to be recognized as an HID device or a Datalogic barcode scanner,

  It works fine until you restart the computer.

  After restart the computer cannot detect the scanner Barcode correctly without re - appears as unknown device.

  I suspect that there is a compatibility problem between barcode scanner and card USB controller on the computers.

  I tried to update all the drivers available on the website www.hp.com and same www.Intel.com (chipset drivers) but nothing has helped to solve this problem

  Tried newly bought barcode scanners and "used" barcode scanners earlier who works on other computers, but the problem remains.

  I found a workaround by connection of bar codes in a USB hub, and then plug the USB hub to the computer.  And leave the USB - hub to take care of the communication with the Barcode Scanner.

  in this case, it takes about 2 seconds for the code scanner barcode to mount correctly in windows under the heading "devices and printers" and then works perfectly, even after a reboot.

  I googled after a response after my problem, but it seems I'm the only one who experience this issue. ?!

  Bought more than 40 computers that I have this problem.

  These were bought at different times with two different for suppliers

  Computer model are the following

  HP ProDesk 1 400 P/N5S21EA

  Specifikations:

  http://WWW8.HP.com/emea_africa/en/products/desktops/product-detail.html?OID=6614160#! tab = specifications

  Does anyone have an idea what could be wrong and how to fix it?

  Thanks in advance

  Sincerely

  Robert T

  Hello

  The problem is not power - related.

  We use passive USB hubs that solves the problemon these computers.

  (it also works with the docks, or if you EliteDisplay E241 HP as we thers a usb hub 2 ports inbulit in monitor that works.)

  The problem lies in the incompatibility between the Intel USB controller and the hand scanner, can be connected to USB 3.0

  When you let another usb-controller support in handshakeing (such as a usb hub), it works.

  Datalogic or Intel would like to acknowledge this error.

  Because none of the big companies want to acknowledge the problem or repair, personally chose to switch to an AMD platform / CPU instead of the Intel and now it works fine!

  We get more performance for your money when AMD is usually less expensive to purchase.

  And because of the poor of Datalogic press where they don't even answer e-mail (their only channel for support)

  I chose to stop using their products. I'm going to use another provider / brand of barcodescanners.

• Kodak in a 2150 does not print wireless. compatible with the usb cable. Help

  My printer prints not my lap top. It works already. I uninstalled the program and reinstalled and it still does not print. I turned off the printer for a minute and I turned my router for a minute and they turned back. I don't know what else to do. Help, please.

  See if it helps:

  Lost on printer all-in-one Wi - Fi
  http://support.en.kodak.com/app/answers/detail/A_ID/2741/selected/true

  The guests to answer and follow the troubleshooting.

• When I plug the USB FLASH drive into the PC it does not appear in the computer

  I have a USB Flash driver: Team Fusion more 4 GB

  Like this one:
  
  Same color and this one exactly.
  and when I put inside my computer I hear the BLOOP sound when I insert it and also when I go out, I hear a noise... but when I go to my computer it does not appear...
  It worked before, I inserted my USB Flash driver inside my computer... then when I right click on a file inside driver flash my computer got stuck and I force restarted my PC with exit it restarts normally and after that it doesn't work any more I just hear sounds when I insert the USB key inside and outside.
  I tried things.
  -Troubleshooting and it didn't help me at all... He didn't show me something when he finished it.
  -Tried restarting the computer and access bios and active in the advanced settings in the number 3 to USB - ZIP
  -J' inserted behind my computer and also in front of the computer USB flash driver.
  -Computer all analysed in depth scan with Advanced System Care Pro 5.4 and did not help even after a reboot.
  -Tried to reinstall the driver for the "Device Manager" USB flash drive
  -IMPORTANT! I tried to plug this USB on another computer and it arises there, but could not access the USB key, I tried to format and it says error and he said that he could not format... I tried to format it in NTFS, fat32, with formats fast and quick, but nothing has worked.
  SO the problem is with the USB FLASH DRIVE! not the computer...
  Help me please :| What should I do?
  Image when my USB driver is inside my computer:
  Open the image in a new tab to see full size image.
  Picture that shows that I reinstalled the driver for my USB Flash drive:
  

  Yes man, he is in disk management. I tried to do a right click on it and clicked on «letter of change of driver and paths...» "and it came up with error... Look man, I fixed that by myself... the flash disk is cool now xD you know what I did? I just went to my dad's pc... I tried to get the DRIVER USB FLASH, but he came up with the error and asked if I want to format it... I clicked format and it didn't work... I tried NTFS, FAT32, format not quick and fast and nothing worked... it was still * place... so what I did? I downloaded "HP USB Disk Storage Format Tool 2.2.3" of http://www.softpedia.com/get/System/Hard-Disk-Utils/HP-USB-Disk-Storage-Format-Tool.shtml here and then I formatted it with success! and then the flash driver disk worked on my dad's computer but when I tried to connect it to my pc, it does not appear lol but it worked on other computers, so it's cool: P I just going to format my PC: P it works now with the USB HP program disk formatting tool. only does not not on my pc, but it's ok... I formate my pc. :)

• Why use my original USB cable charger for more than a year now is startig to show a sign that it is not compatible with the device? o

  I used without problem my USB cable for over a year, it is original Apple and yesterday began to show a sign that it is not compatible with the device. How can not be supported if it's Apple.

  This can occur if the cable is damaged in any way. See: recharge your iPhone, iPad and iPod touch - Apple Support for more information.

• Apple Watch magnetic charging Dock is compatible with the adapter USB 12W power and if so, is the adaptor 12W shorten the charging time?

  Apple Watch magnetic charging Dock is compatible with the adapter USB 12W power and if so, is the adaptor 12W shorten the charging time?

  Yes and no.

• I have a Belkin USB peripheral switch I used with my PC or my wife. I just replaced his PC with a laptop with Windows7. The driver is not compatible with the new op system. You or Belkin have download free fix or pilot?

  Driver is not compatible with the new op system.  You or Belkin have download free fix or pilot?

  www.Belkin.com

• Older versions of the Client/Agent display are compatible with the 3.1 Manager connections?

  Hello

  I want to update my servers VMWare view to version 3.1 support RGS.  However, we have a bunch of thin clients around the area that are already installed and would be a pain to remember and upgrade.  Is the 3.0.1 client and agent compatible with the broker for the 3.1 connections?  Bascially, could I just upgrade the security servers and brokers and install the new client and the agent that we get the opportunity?

  Thank you!

  Kelly B

  The communication protocol is designed to be backward compatible with older versions of the client, I have a version of the VDM 2.1 thinapp client sitting on a USB key that connects with 3.1 brokers.

• El Capital is compatible with the MacBook Pro version 10.10.5? Can anyone help answer this question before I update? Thanks in advance.

  El Capital is compatible with the MacBook Pro version 10.10.5? Can anyone help answer this question before I update? Thanks in advance.

  Why did you start a new post? Post again only after only 8 minutes accomplished nothing.

  There is no general problem going to EL Capitan on your Mac.

  Some applications may require updating.

  Some devices like printer may require the updated drivers. For some readers of devices not being updated are available.

  This is the Office Mac Pro forum. I asked that your post be moved to the El Capitanforum or another appropriate forum.

  Please move to the EL Capitan forum or another appropriate forum. Thank you

• How can I return to a version of Firefox that is compatible with the Norton Toolbar?

  After that I have updated to the latest version of Firefox, the Norton toolbar is disabled. I would go back to a previous version that is compatible with the Norton toolbar. Can I do this?

  For security reasons, it is preferable not to decline to 40 Firefox. I could refer you to this thread for a more in-depth review and suggestions: screwed up why Firefox NEW Norton Internet Security?

• is this compatible with the Kindle HD?

  Is this compatible with the Kindle HD?

  Firefox will work on my mobile device?

• Old favorites are not compatible with the version 20 + Firefox

  General information:
  I use the old client version 3.6 given that an old utility addon author stopped update and will not work with the new revisions. Despite disabling the update featured on: config and in preferences, the browser refreshes still finished (initially I was using 3.4 and would prefer to use that, but no matter how I try I can is no longer cancel 3.6 to 3.4 even if I reinstall using an Installer 3.4). Accordingly, I had the habit of keeping a copy of my directory of firefox where it updates again without asking, she has. This could help the guy out to meet countless people who have lost their favorites because of the upgrade released this year and I hope that someone to investigate and release a patch/utility to fix the problem.

  Question:
  I checked that the most recent customer since at least version 20 and leave, are not compatible with the old bookmark JSON files. Those who have been upgraded to the latest revision not only lose their favorites, but cannot restore them either, as Firefox only returns the error message: "unable to process the Backup File.

  I confirmed that the files themselves are perfectly intact with no sign of corruption and are as expected. Restore ok old revisions of browser (in my case specifically 3.6), they will not restore the most recent customer reviews. This isn't a fault with bookmark backups, but with new clients (I guess they changed the way they store information in the JSONs at some point. I note in the code for the JSONs GUID has never been used in old revisions, but it is in the most recent revision. Maybe it's causing an incompatibility problem? You just need to adjust the client so that it looks for the GUID and if none can be found to ignore it rather than decide that the file is corrupted.

  Old JSON Code snippet: {"title":"","id":1,"dateAdded":1306666129870000,"lastModified":1306670152435000,"type":"text/x-moz-place-container","root":"placesRoot","children":[{"title":"Bookmarks Menu","id":2,"parent":1,"dateAdded":1306666129870000,"lastModified":1381254048121000,"type":"text/x-moz-place-container","root":"bookmarksMenuFolder","children":[{"title":"Recently Bookmarked","id":6,"parent":2,"annos":[{"name":"Places/SmartBookmark","flags":0,"expires":4,"mimeType":null,"type":3,"value":"RecentlyBookmarked"}],"type":"text/x-moz-place","uri":"place:folder=BOOKMARKS_MENU&folder=UNFILED_BOOKMARKS&folder=TOOLBAR&sort=12&excludeQueries=1&excludeItemIfParentHasAnnotation=livemark%2FfeedURI& maxResults = 10 & queryType = 1 "}, {'index': 1,"title":"Recent Tags", 'id': 7, 'parent': 2,"annos": [{'name':" places/SmartBookmark', 'flags': 0, 'expires': 4, 'mimeType': null, 'type': 3, 'value': 'RecentTags'}], 'type': ' text/x-moz-place', 'uri' ":" place: sort = 14 & type = 6 & maxResults = 10 & queryType = 1 ""}, {'index': 2, 'title': id '',' ': 8, 'parent': 2, 'dateAdded': 1294868015246000, 'lastModified': 1294868015246000, 'type': "text/x-moz-place-separator"}

  New JSON Code Snippet: {"title":"","guid":"5rkFafJ6AnRZ","id":1,"index":0,"dateAdded":1396387525168000,"lastModified":1396387525168000,"type":"text/x-moz-place-container","root":"placesRoot","children":[{"title":"Bookmarks Menu","guid":"m7vLM41-lzQi","id":2,"index":0,"parent":1,"dateAdded":1396387525168000,"lastModified":1396387526173000,"type":"text/x-moz-place-container","root":"bookmarksMenuFolder","children":[{"title":"Recently Bookmarked","guid":"BEffyw6xva93","id":13,"index":0,"parent":2,"dateAdded":1396387526172000,"lastModified":1396387526172000,"annos":[{"name":"Places/SmartBookmark","flags":0,"expires":4 ,"value":"RecentlyBookmarked"}],"type":"text/x-moz-place","uri":"place:folder=BOOKMARKS_MENU&folder=UNFILED_BOOKMARKS&folder=TOOLBAR&queryType=1&sort=12&maxResults=10&excludeQueries=1"},{"title":"Recent Tags","guid":"WmnlbVv38Bjv","id":14,"index":1,"parent":2,"dateAdded":1396387526172000,"lastModified":1396387526172000,"annos":[{"name":"Places/SmartBookmark","flags":0,"expires":4,"value":"RecentTags"}],"type":"text/x-moz-place","uri":"place:type=6&sort=14&maxResults=10"}

  Solution?
  In my case, I had a copy backup of the old directory for review. To restore I opened the copy and export bookmarks as an HTML, that I restored in the most recent client. If you don't have a copy of the former client, the best thing would be to try and re-install an older revision of the customer and either make a copy of the program folder and use another copy of that you can use the new and old customers and you worry about the loss of an older revision, since you'll always have 2 copies of the former client (the one you use the one that you use to restore in the case of at level). Or export bookmarks to an HTML element, and then upgrade the client to the newest and import the HTML instead of JSON files.

  Please review and create a more simple solution to a problem of stupid incompatibility. ^_^

  There are a number of operations in the file places.sqlite which are obsolete.
  For example,.

  setItemGUID (aItemId, aGUID) obsolete since Gecko 14.0 - returns a unique global identifier for the element. This is mainly for use by extensions that synchronize data between different profiles bookmark.
  
  
  
  Former id snippit:
  "title": "','id': 1,"dateAdded": 1306666129870000,"
  New snippit
  {"title": "","guid": "5rkFafJ6AnRZ",""id ": 1, 'index': 0, 'dateAdded': 1396387525168000"}

  There are other identifier here has changed, I think in version 14
  «Note: the importHTMLFromFileToFolder() method has been removed in Gecko 14.0 (14.0 Firefox / Thunderbird 14.0 / SeaMonkey 2.11).»

  But more likely the former is Netscape format: http://msdn.microsoft.com/en-us/libra.../aa753582%28VS.85%29.aspx

  I tried this however: I installed the old version (3.5) and updated to the current version. All my favorites were there. I had to check the updates and could not skip certain steps of 3.5 to 3.6 for example. He then went from 3.6 to 12, then with todays update went straight to 30. They're all here. However nothing is perfect, backup is recommended as well.

  Back to your question, makes it easier for backward compatibility, my hypothesis is that they changed with the updates and ignored some versions. Saved profiles or places.sqlite files may be missing this change because the format changes in the update?

  My suggestion would be filing a bug at this request, providing a few cases where this would be necessary. Currently only the current version of Firefox is supported, which can leave us to the work around that you are currently using.

  Reference documentation for the developer of the places :

• My Itunes does not save my iPhone saying that the backup is damaged or is not compatible with the iPhone.

  I / m trying to backup my iPhone 5, but the iTunes says it is not possible because the backup is damaged or is not compatible with the iPhone... What should I do?

  What version of iTunes you have? The most recent is 12.4.1. Try downloading this version and controlled again.

• Is iphone 4 compatible with the latest itunes app?

  My iphone 4 have still the old itunes icon purple and not the white and blue later.

  My phone says it is aware of the software updates, but I'm not sure if it is.

  What is the latest software operating system for iphone 4 and it is compatible with the latest itunes app?

  1 7.1.2 iOS.

  2. Yes.

  (142664)

• Not compatible with the version26.* Add-on

  LightBeam add-on not compatible with the latest version of android firefox. What should do?

  Hello BudIsland, add-on (currently?) is available for firefox on desktop, not the android version: https://addons.mozilla.org/en-US/firefox/addon/lightbeam/