synchronization of multi function HAVE AO

Similar Questions

• How to operate the laboratory discovered multi-function synchronization with multiple devices and change the recording time?

  Hi, I'm new in Labview. I need help for:

  1 change a program multi-function in order to record the data of three cards daq (devices 1-3) and output through the map (1 unit). The current program was created to record and output signal of one of the card (1 unit). I try to choose multiple devices when I run the program, but there is an error 200558 shows "a task cannot contain multiple independent devices. Create a task for each independent device.

  2. change the duration record for a longer period, for example: 0.1 s. Currently, the recording time is s 0.009971.

  I joined the multi - funtion.lld. In this library, "des_v2_Multi-Funtion_Synch I - AO.vi" is the program that I need to change. I've also attached a file of input for runing the program signal.

  Thank you very much!

  Sincerely,

  Jie

  Hello Jshen6,

  You can have different examples of VI if you do not use the same version of LabVIEW. I am currently operating on LabVIEW 2013 SP1. Whatever it is, this article should be useful to you that he describes in detail how to synchronize multiple tasks of series M.

• Using clip markers for synchronization in multi camera CS6 edit

  I am trying to find a way to synchronize video clips to edit in camera multi window. The problem is that I have a clip is the length of the video (1 h). the second continuously camera stopped and started during the filming that he wandered around to take pictures from different angles. I thought I could use the clip marker function to synchronize these. the problem is that I have placed a "comment marker" on each sequence of clip at the right time in each of the two clips and appoints them using the same name. I then open the movie camera to create multiple source.  But the ability to synchronize with the clip markers is grayed out and cannot be selected. I tried to modify the markers to make chapter markers, but it still does not work. I don't see an option to make them numbered or I would have tried that too.

  How do you get the CS6 to allow me to use the trademarks of element, or how to set the clip markers that will be recognized by the camera multi function?

  Thanks for your help

  Add take longer to V1, and then add the shorter clips to V2 and synchronize them manually.  Then nest this sequence in a second, right click and select Activate Multicam.

• MULTI-FUNCTION RUNTIME error

  Hi, experts,

  I am trying to run "RUN the FUNCTION PANEL" on CVI. During the construction of pilot, I checked the multi-function of this command, but it failed with the error message, Interactive runtime error - Unresolved symbol: _Math_Average.

  I do the material to the CVI basic text, and it is a very simple function. And in addition, it ran correctly when I finished the pilot, so I think that programming should be correct.

  So I fight with all editing parameters, but I couldn't find the solution.

  Does anyone have any solution or tip?

  Thank you

  Hello TetsuyaU!

  "' The most obvious solution to this problem would be to activate the Interactive execution environment window options found in Options ' environment ' Interactive window. These options indicate if the project or loaded instrument drivers files are used by the Interactive execution window. Otherwise, if the corresponding option is not enabled, the Interactive execution window fails to connect with your instrument driver symbol and you get an error of unresolved symbol.

  It works for you?

  Best regards!

  -Johannes

• Cannot generate the multi-function in Vista

  We ship an ActiveX control for use by our customers. In our sample code, we created a multi-function for them.

  A customer reported that it cannot create a new function by using the Vista Panel - but he can create one using Windows XP.

  Is there a known issue with the creation of panels to function under Vista?

  Concerning

  John Barton

  Hi John,.

  One thing you need to check on these machines that fail is the File Format of the FP.  This opens a file of .fp to the CVI, then going to the Options menu and then click on the FP File Format.  In this dialog box, make sure that the default new File Format is set to CVI 5.5 and later versions or CVI 8.5 and later versions. Once you put in one of these formats, you should be able to generate your panels to function again.  Please let me know if this does not work, or if you have any questions.

  NickB

  National Instruments

• Behavior "Recall multi-function.

  
  

  Hello Bernd,

  There are a few options for you.  If you do not have one of your windows in the display by tabs, you can go to Options' environment and then uncheck the "Show workspace tabs.  Otherwise, the first time that you open a panel of function and it is shown in actual size you can go to the window menu and select "release all Windows FP".  This will remove the windows control panel function, and each new multi-function open window will remain off-station.  If you want to dock them, you can simply return to the window menu and select "confine all windows of FP.

  NickB
  National Instruments

• My thunderbird (windows 8) essentially has stopped working. More than one minute to open an email - all other functions have similar delays. What should I do?

  For some reason, thunderbird (windows 8) essentially has stopped working. More than one minute to open an email - all other functions have similar delays. I tried to archive, but I get a message that says that a script has stopped working. He does the same in thunderbird safe mode. My old computer (XP) works very well. I can't find my profiles on windows 8 to rebuild the database world.

  Follow-up: McAfee was the problem. I contacted them via chat. Remotely, they took control of my computer and changed the settings. TBird works fine now.

  Thank you for all your help.

• What CRM SKU multi-functionality rental CRM 4.0 support

  CRM 4.0 enterprise edition is already installed in my DEV environment but I'm not able to create several m organization.

  I wanted to know CRM SKU support multi-functionality rental of CRM 4.0.

  [Moved from the community centre of Participation]

  Microsoft Dynamics is supported on MSDN. Check the CRM forums to:

  http://social.msdn.Microsoft.com/forums/en-us/home?category=Dynamics

  Don

• entry continued and finished output in 'Multi function AO AI sync.vi ".

  Hi all

  Can I acquire data streaming and output finite number of data with "Multi function AI AO sync.vi '?

  Thanks for your help!

  Hello

  I think that this should be possible.

  Just change the mode to sample your way of samles genearting to "samles finish" and add a constant or a control with the number of samples you want to generate...

  Kind regards

  adigator

  

• Where can I find the definition of 'synchronize' Cloud-creative function in Photoshop

  How access/activate the sync settings to Cloud-creative function in Photoshop?

  I have the Swedish version of membership cloud creative Photoshop CS6 13.1.2 x 64, last update of CC, Windows.

  Instructions (http://helpx.adobe.com/se/photoshop/using/sync-settings.html) States the following:

  -----------------------------

  

  In my version, I can't find the choice of Adobe id under Edit (Redigera). There are no parameters to synchronize nowunder 'my' Edit/Settings .

  -----------------

  

  Then, how should I proceed?

  Thanks a lot for your help in advance.

  Best regards

  Cecilia

  Hi Cecilia,.

  To synchronize your settings, you must use Photoshop CC (aka Photoshop 14). You use Photoshop CS6, which is the previous version of Photoshop (version 13.1.2). You can download Photoshop CC and other applications http://creative.adobe.com/apps cloud creatives

• How do I get the multi-function of labview for data acquisition on my toolbar function for lv2011? It is a reload of your laptop has crashed.

  I had to reload our installation of LV and have lv2011 and NOR-DAQMX 9.9.    I can't get the range of DAQ function to display the toolbar funtioon.   I tried to fix the OR-DAQMX driver.   It showed message "installation lv2012 support" and "facility charge SP1 lv2012".  I have not seen a message of support from lv2011.

  There was a problem downloading of configuration and 2012SP1 was wrong as my group of licenses for the account representative.  This has since been uninstalled before installing 2011 (without SP1).

  Thanks in advance,

  Bill

  Updated the installation of the driver NOR-DAQMx vs repair.    Apparently, he saw the LV2011 and installed support files.   Everything works now.

• Multi-function generation creates code that calls releases the memory it has no allocate

  Generation of a panel based on our ActiveX component generates the code below.

  My problem is that it is free memory that it does not allocate - a bad programming practice. The user must allocate a buffer for testFilePath, but this method releases.

  Problem is known by a side effect of this:

  http://digital.NI.com/public.nsf/allkb/205CA72511BC735C862570F80019660A?OpenDocument

  John Barton

  ----------------------------------

  HRESULT CVIFUNC XJIntegrationOCX__XJIntegrationSetTestSystem (CAObjHandle objectHandle,
  ERRORINFO * errorInfo.
                                                                char * testFilePath,.
  VBOOL * arg2)
  {
  __Result HRESULT = S_OK;
  XJIntegrationOCX__XJIntegration_Interface * __vtblIFacePtr = 0;
  int __didAddRef;
  int __errorInfoPresent = 0;
  BSTR testFilePath__AutoType = 0;
  VBOOL arg2__Temp;

  __caErrChk (CA_CStringToBSTR (* testFilePath, & testFilePath__AutoType));

  __caErrChk (CA_GetInterfaceFromObjHandle (objectHandle,
  & XJIntegrationOCX_IID__XJIntegration,
  0, & __vtblIFacePtr, & __didAddRef));
  __caErrChk (__vtblIFacePtr-> lpVtbl-> SetTestSystem_ (__vtblIFacePtr,
  & testFilePath__AutoType,
  (& arg2__Temp));

  If (testFilePath)
  {
          CA_FreeMemory (* testFilePath);
  * testFilePath = 0;
  }
  If (testFilePath)
  __caErrChk (CA_BSTRGetCString (testFilePath__AutoType, testFilePath));
  If (arg2)
  {
  * arg2 = arg2__Temp;
  }

  Error:
  CA_FreeBSTR (testFilePath__AutoType);
  If (__vtblIFacePtr & __didAddRef)
  __vtblIFacePtr-> lpVtbl-> Release (__vtblIFacePtr);
  If (FAILED (__result))
  {
  If (testFilePath)
  {
  CA_FreeMemory (* testFilePath);
  * testFilePath = 0;
  }
  }
  CA_FillErrorInfoEx (objectHandle, & XJIntegrationOCX_IID__XJIntegration,
  __result, errorInfo, & __errorInfoPresent);
  If (__errorInfoPresent)
  __result = DISP_E_EXCEPTION;
  Return __result;
  }

  Hi John,.

  This parameter is supposed to be an output parameter? If so, so that the code looks right to me. The function expects a string to pass, and then returns a different string via the same parameter. In this case, by the rules of the ActiveX, the method releases the original string after using it, and then allocates a new string. The only difference between a typical ActiveX interface and this wrapper CVI is that with a typical ActiveX interface it would operate the BStr strings instead of the C strings.

  Because the function redistributes the buffer after the release of whatever you spend, you should not change this buffer memory management in client code. The hope is that you allocate memory initially, then call this function and then free the memory some time after the return of this function. The fact that this function of reallocation of memory at the same time should not affect this process.

  If you use invalid free question, a couple of things to watch are that: 1) when you allocate memory initially, you do not use a different allocater, such as malloc in the C library, for example. If you need to allocate explicit memory, you must use CA_AllocMemory, which is what the ActiveX library and 2) that you don't have multiple references to this pointer that could potentially be released several times.

  Luis

• How to make multi-function devices under linux (composite) in windows

  I was able to compile my Linux machine to a composite widget. (Series + mass storage)

  When I plug the unit on a Linux PC, the operating system was able to detect and use the two functions. But when I plug it into Windows, it is just detected as a "Gadget Composite multifunction" and I can't use it as either a mass storage or a device series.

  How can I do to make this work in Windows. Deploys a really essential custom driver for this task? If so, how this is achieved the way less "painful"?

  Hello

  Thank you for keeping us posted.

  I would have you post here for assistance more.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Let us know if you any query concerning Windows.

• What function have to use

  Dear all,

  I'm working on a query that needs complex condition, could someone can help me what function or statement to have to use in this test?

  This is the query:

  SELECT MAIN_ICODE,

  GROUP_ICODE,

  SUB_ICODE,

  SUB_IDESC,

  UNIT_PRICE,

  NVL (BAL_QTY, 0) BAL_QTY,

  TTYPE

  OF INCH03

  WHERE RTYPE = 'T'

  AND TTYPE =- need to Add Condition here

  AND NOT MAIN_ICODE ('001 ', ' 002')

  Data in my table,

  	MAIN_ICODE	GROUP_ICODE	SUB_ICODE	SUB_IDESC	UNIT_PRICE	BAL_QTY	TTYPE
  1	006	001	18702	ENGINE WITH TECHO FOR CENTRIFUGE SENSOR	43000.00	0	B
  2	013	001	18725	LIGHT STEM TUBE 40 W (GREEN)	180.00	0	M
  3	013	001	18709	SWITCH ON / OFF FOR R.O.PLANT.	650.00	0	M
  4	005	001	18730	BRASSO METAL POLISH	200.00	0
  5	006	003	18677	MEMOGRAPHY UNIT	1400000.00	0	B
  6	006	001	18712	TEETH MICRO FORCEPS	650.00	0	B
  7	006	001	18713	PLAIN OF MICRO FORCEPS	550.00	0	B
  8	013	001	18728	FOR LIGHT FLASHING	1 050,00	0	M
  9	005	002	18642	MAGNESIUM SULFATE POWDER	1800.00	0
  10	005	002	18643	WATER PURIFICATION TABLETS	80,00	0
  11	005	001	18654	FILTER OIL [LF-670] TO 800 KVA	1550,00	0
  12	013	001	18659	CHANGE OVER THE POLE AMP 4 BOX 400	23000.00	0	M
  13	011	001	18731	SERVER DELL POWEREDGE 2950 SAS * 4 MACHINE	115500.00	0	I have
  14	011	001	18732	SERVER DELL POWEREDGE 2950 SAS * 3 MACHINE	99500.00	0	I have
  15	033	001	18656	THE WOODCUT DISCK 8 "	680,00	0
  16	009	001	18631	BLOOD BAG [DOUBLE WITHOUT SET]	320,00	0
  17	005	001	10874	FILTERS FOR WATER [F 10-2]	95.00	0
  18	005	001	10887	[O - RING] WATER FILTER	150.00	0
  19	033	001	11602	SAW BLADE MOUNT	25.00	0
  20	005	001	11657	[M-601-C] WATER FILTER	200.00	0

  Here, I need to add the condition if TTYPE = 'I' return all data 'I' game but if TTYPE is selected else as am ' can it return data of'm ' including NULL values condition also same data for 'B '.

  Please help me in this matter.

  Thank you

  Atif Zafar

  Dear Sir

  Give the following condition

  AND (TTYPE =: TTYPE OR (: TTYPE <> 'I' AND TTYPE IS NULL)). So the total query will be

  SELECT MAIN_ICODE, GROUP_ICODE, SUB_ICODE, SUB_IDESC, UNIT_PRICE, NVL(BAL_QTY, 0) BAL_QTY, TTYPE
  FROM INCH03
  WHERE RTYPE = 'T' AND (TTYPE = :TTYPE OR (:TTYPE <> 'I' AND TTYPE IS NULL)) AND MAIN_ICODE NOT IN ('001', '002')
  

  Manu.

• I have iphone and an ipad.  I need to synchronize the two and have at the same time on this new computer.  How do I do that?

  All the updated IOS iPhone.

  iPad - last update complete AIO

  new computer - laptop HP with Windows 10

  I need to sync my iphone and ipad to this computer - both have different things on them, but are most of the exact time.  Missing a few songs and contact.

  How can I do both appear on my computer without calling to zero one over the other?

  See this - http://www.apple.com/icloud/setup/