synchronization of photoshop with my macbook screen show so it's 100% / size of the document. tried a few things, but bad!
I tried this... Get glimpses of more specific in Photoshop print size
I have an a4 document set to 300 dpi for example... any document size really...
so I tried what is in this article and its does not work...
I worked on my macbook pro 15.4 inch (no retina) a 93.5 ppi
so I place 93.5 in the section unit and rules of prefference, just as she shows in this article... I did so that the graphics processor status is issued
so, I make the changes and still no effect...
and see by reducing the dpi document as it gets close to the actual size, but I should change the document dpi size of course. more will happen if I don't want to use 300 dpi... I don't know if its clear, but I know what is happening there, I think there must be something else that I need to adjust...
If anyone can please help me! I use illustrator as well. Apparently, with which I have for example put an A4 paper sheet against my screen and at the height of the Board a4 graphic on my screen for the piece of paper and note down the zoom level and custom made it... (sounds like something that should be just a few clicks of a button to synchronize my screen with an adobe product... Yet, it is not...)
If someone could walk me through for both would be great.
Ooooh I've worked on it.
the mistake that I did, well I thought that I had to use the "diagnol' cross measurment screen which was 15.4... so 1440 divided by 15.4 who gave me rounding 93.5.
but in fact, I had to measure horizontally across my screen 13.1 inches and make the sum and it worked!
then follow this link. but measure horizontally across your screen (don't think he says...)
http://www.photoshopessentials.com/Essentials/print-size/
Tags: Photoshop
Similar Questions
-
I received an email with an attachment that I downloaded, when I go to open the windows media center file opens but I can't find file what I do
I was able to open using AbiWord, thanks for the reply
-
Using PhotoShop elements Version 9.3 14?) : I have a file I've flattened and now want to resize now. When I try to resize the size of the document from inches to Pixels. When I choose to change - there is no other choice "Pixel". I'm in., Points, cm, but no Pixel option. I have the following options checked: resampling, constraint proportions, scale of Styles.
The plan was to add a frame of 60 pixels around the 5.56 a picture and then framed 8 x 10 x 7.
Go to Image > resize > canvas size. You should be able to find the scale of the pixel in the menu dropdown.
-
When I try to sign a document, the screen turns off and I do not see the document.
When I try to sign a document, the screen turns off and I do not see the document.
Hey jordic35730386,
Please try to uninstall and reinstall Adobe Reader here:
Adobe Acrobat Reader DC install for all versions
Let me know how it goes.
Kind regards
Ana Maria
-
With EchoSign, is it possible to not send email confirming that the document was "signed and filed?
Hello Neilc96817377,
Support can make the following changes, as shown, and you can contact them directly:
Support | services of Adobe eSign
-Usman
-
I get this message when I turn my macbook pro on "there is no set of application to open the document"stream_000b.strings ". "How can I get rid of him. pls help
Check preferences system/users and groups to see if this item is in your login items. If so, select it and use the sign less to remove.
If she is not there, see if you can find the file by using one of these programs. If you go Finder/display/show bar path, it will show you where it is located. You can then remove it.
-
Help with report VM (name MemoryMB NumCPU, data store, total size of the disk)
I currently have a script (listed below) to the CR of query for each virtual computer and their allocated disks. The problem with the script is that when he meets a VM with disks on several data only stores the first data store is listed in the report. However, the total size of the disk is correct.
Any ideas to fix this?
$datastoreExp = @{N = "Datastore"; E = {($_ | get-datastore | select-object-1 premier).} Name}}
$diskSizeExp = @{N = "Total disk"; E = {($_ | get-harddisk | mesure-objet-propriété CapacityKB-somme).} Sum}}
Get - vm | Select the name MemoryMB NUmCPU, $datastoreExp, $diskSizeExp | Sort - property datastore, "Total disc | Export-Csv C:\Scripts\Reports\chargeback.csv
I thought that was what you wanted, judging by your examples.
In any case, no problem, the following should do the trick.
$dsRegEx = [regex]"\[(\w+)\]" $report = @() get-vm | % { $vm = $_ $vm.HardDisks | %{ $row = "" | Select Name,MemoryMB,NUmCPU, Datastore, "Total Disk (Gb)" $row.Name = $vm.Name $row.MemoryMb = $vm.MemoryMb $row.NumCpu = $vm.NumCpu $row.Datastore = $dsRegEx.Match($_.Filename).Groups[1].Value $row.{Total Disk (Gb)} = "{0:N}" -f ($_.CapacityKB / 1Mb) $report += $row } } $report | sort -property Name, datastore,"Total Disk" |Export-Csv "C:\chargeback.csv" -noTypeInformation
Since there are sometimes problems with the display of the hooks I have attached the script.
-
something is wrong with my macbook screen
As I was closing my computer quite quickly, I closed it while a notebook was between it. When I went to go check on it the screen was messed up. A little less than half of the screen is black with weird colors. I did some searching online and read something about LCD.. I also read that I have to connect it to TV, I did and the image from the TV is perfect but the computer itself still has the black with colorful lines. I really need help on how I can personally fix, since the computer is not mine and I will be in huge trouble if the owner finds out.the LCD screen is broken and must be replaced if it is a retina display, it will cost a lot of money
It may be cheaper to buy a new laptop if it displays a retina, so she the older kind, it will be a little cheaper
-
My Macbook Pro running El Capitan 10.11.6 shows my printer HP (envy 110) as offline after a print or scan session. I have to restart the printer each time I use it, and then the Mac it falls again after printing or scanning session.
I loaded the latest drivers on the Apple site without success. The two are on a wireless home network.
Help!
-
Error with a blue screen in windows 8 64-bit because of the file "cnnctfy3.sys".
I m sending u link of this error minidump files since there were 5 error files I downloaded on OneDrive
Link: https://onedrive.live.com/redir?resid=620CE0EA1DD716E9%21356
CrashFileUpdate folder_name
Please help me... my laptop running very low, because of this. and the start-up stop n is tedious because of this...
Thanks and greetings
Ravi Mehta
HI Ravi,
This problem can occur because the cnnctfy3.sys file on the computer.
All files dump reports show:
9F error checking, {4, 12 c, fffffa8004a5ab00, fffff880009c2810}
WARNING: Unable to verify timestamp for cnnctfy3.sys
ERROR: Module load completed but symbols can be loaded for cnnctfy3.sys
Failed to retrieve the thread context, Win32 error 0n30
WARNING: Unable to verify timestamp for win32k.sys
ERROR: Module load completed but symbols can be loaded for win32k.sys
Probably caused by: usbccgp.sys
cnnctfy3.sys is the driver of Connectify light package Filter Kit. If you have installed the package, I suggest to uninstall and check if this solves the problem.
Please keep us informed.
-
Just upgraded to Mac OS 10.11 and cannot reduce a document. A message from Acrobat Pro says that I don't have permissions. I think it has to do with SIP, but how this problem is corrected?
Zapped the PRAM and Acrobat Pro works now.
===================================
-
Internet connections
Hello Daton,
Thank you for your message. Please ensure that the following setting is correct:Click 'Start' > right click on 'My computer' > select 'manage '.Select Device Manager.Double-click "network adapters."Less you should see your network adapters, double-click on each of them and ensure that they are ready to "Enable".Please let us know if this solves your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
When connected to an HDTV, I can turn off my MacBook screen (end 2011)?
With a Windows laptop, you can switch between the laptop screen and external displays. One or the other or both on. Can I do this with my MacBook end 2011?
When I have my MacBook connected to my HDTV, I just want to see the display on my HD TV. Can I turn off the MacBook screen?
What happens if you close the Mac?
-
MacBook OSX 10.10,3
Trying to figure out which takes up more space on my computer, someone showed me somewhere with a colored bar that shows how much space is taken by the documents, pictures, music, etc. However, I didn't write that information down and now I can't find it. I'd appreciate any help.
Apple menu > about this Mac, and then click storage at the top of this window.
However, I can't find this information useful stuff. You can try the search for large files, as described in http://osxdaily.com/2012/04/17/find-large-files-in-mac-os-x-search/
-
I have create a TIFF in Photoshop with a transparent background.
Then I open Illustrator and the place of the tiff on a color background.
Looks like a lot on the screen, but when I print the TIFF is no longer with a transparent background.
The background is not white, it is always transparent, but he changes the color that I put it on.
So when I print the green background becomes a little darker Green where the transparent background is.
Photoshop and illustrator that I have are the latest versions.
I did not have this problem in older versions of photoshop and illustrator.
You have spot colors, try to check "convert all spot colors to process.
Or try to use the .psd format that was loss of compression
Maybe you are looking for
-
Satellite L300D - 13 X: Vista crashes everytime during the installation of updates
Hello! I have a Satellite L300D Vista HB. It started with the machine crashing, thought it would be OK after reinstalling operating system.But it hangs whenever he has installed updates. Anyone experienced the same problem? I know, I can just ignore
-
Qosmio X 300 - 13W - 32 bit or 64 bit OS?
I ordered my Qosmio today (X 300 - 13W) I think it will be 32 bit vista Home premium. I didn't want that 64-bit because I was afraid that it doesn't recognize my old games. After seeing the blue button wire s I wonder if there is a problem with the o
-
How to check the model number of my Z3?
Hello I just bought a Xperia Z3, but the frequency of the LTE does not seem to work. I took the phone to Sonymobile.com, but the software version changes every time I enter the site. For example, yesterday the asociated to my phone software version w
-
Greetings, I had problems with the sudden appearance of BSOD. They occur every week or so. I checked on the BSOD search wiki article and resolve, but I don't have the knowledge of how to say with certainty what is causing my problems. For this reason
-
What I can or cannot save video cassettes in stereo, transfer mp3 files, in Windows 7
I want to transfer old tapes into mp3 files, but my os is Windows 7, the Audacity is not compatible with. In addition, the Realtek audio driver does not provide for a 'line' of entry for the 3.5 jack, I have the Platinum to cassettes. My hardware onl