My Macbook Pro shows off my HP printer online after the first use (print or digital). I have to turn the printer off and then on again to print or scan for even once.

Similar Questions

• I've upgraded to the new operating system and now my MacBook Pro is in trouble.  Should I uninstall the new system and if so how?

  I have upgraded to the new operating system, El Capitan 10.11.4, and now my MacBook Pro is in trouble.  Should I uninstall the new system and if so how?

  Restore the backup that you did when you replaced the old system

• I can't open microsoft office outlook. It says cannot open the outlook window. I tried to run "outlook.exe/resetnavpane, but it shows and error msg 'make sure you typed the name correctly and then try again.

  I can't open microsoft office outlook. It says cannot open the outlook window. I tried to run "outlook.exe/resetnavpane, but it shows and error msg 'make sure you typed the name correctly and then try again.

  I can't open microsoft office outlook. It says cannot open the outlook window. I tried to run "outlook.exe/resetnavpane, but it shows and error msg 'make sure you typed the name correctly and then try again.

  There is a SPACE between 'exe' and ' / '. You didn't have that. That's why.

  Please copy and paste it in the search box ot Run box... outlook.exe /resetnavpane

  t-4-2

• My iPad does not recognize not my Officejet 6500 has, unless I turn the printer off and then on again. Why?

  I recently changed my router from BT to Technicolor gateway provided by Utility warehouse.

  Previously, my iPad easily recognized my HP Officejet 6500 printer has (ethernet) but now this isn't unless I have turn the printer off then on again.

  Of course, it is a pain. How can I solve this problem?

  Thank you very much

  Hello

  It seems that the new router may not support multicast or was not configured correctly.

  Networking Hello Zero Configuration Apple is the method of communication used by any Apple device and relies on IP multicast.

  Some routers does not support multicast or maybe this option is disabled by default.

  I wouyld recommend contacting the Technicolor gateway serice provider and check if the access point supports multicasting, or it may require updated firmware or the specific support configuration.

  Kind regards

  Shlomi

• Impact of setting the interval partitioning off and then on again

  Hi all

  Have discovered that to split the partitions of a partitioned table Beach-interval, in that we need to define the partitioning interval all issue the command split then on again.

  e, g.

  ALTER TABLE retailer_transaction SET INTERVAL ();

  ALTER TABLE POR2_retailer_transaction

  SPLIT PARTITION PART_400012 AT (TO_DATE (' 2020-09-01 00:00:00 ',' SYYYY-MM-DD HH24:MI:SS ',' NLS_CALENDAR = GREGORIAN '))

  INTO (PARTITION PART_202008,

  PART_400012 PARTITION)

  ALTER TABLE retailer_transaction SET INTERVAL (NUMTOYMINTERVAL(1,'MONTH'))

  Everything we need to pay attention to that?

  Using oracle 11.2.0.3

  Thank you

  You can NOT split the LAST (most HIGH_VALUE) partition of a partitioned table interval interval. You can only separate partitions BEFORE the last. Which converts also all partitions from the bottom (split and below) for the partitions of the RANGE.

  If interval partitioning will only apply to data added above the transition point (the score higher.

  To return to your original question. To split the LAST interval follow the procedure described in your original post

  1. range partitioning

  2 split the partitioning

  3 set the partitioning interval on

  Conclusion with this however when adding data back to a nine month doesn't automatically create the partition again.

  This "new month" MUST BE above the point of passage for a new partition to create. In your code example, this point of transition is for the year 4000.

  This works very well for me:

  ALTER TABLE sales PARTITION RENAME SYS_P1122 to SALE_400012

  ALTER TABLE sale SET INTERVAL ();

  ALTER TABLE SPLIT PARTITION for sale

  SALE_400012 TO (TO_DATE('01/02/2020','DD/MM/YYYY')) IN

  (

  SALE_202001 PARTITION,

  SALE_400012 PARTITION

  );

  ALTER TABLE sale SET INTERVAL (NUMTOYMINTERVAL(1,'MONTH'))

  INSERT INTO sales

  (SALES_DATE, STORE_NUM, QTY_SOLD)

  values (to_date('31/12/4001','DD/,MM/YYYY'), 1, 10);

  This last INSERT statement above creates a NEW partition because the date (31/12/4001) is above the transition point.

  Looks like you want to move the transition point downwards. That is - you were using this year there date of 4000 as a 'catch all '.

  1. set the partitioning interval

  2 split that last partition into two NEW partitions (new names) by using a VALUE that is high enough to contain ALL the data you have in this last partition.

  3. remove the last partition - it should now be empty

  4. turn on range partitioning

  Now, any data that you insert above this NEW point of transition (the limit that you used for the new partition) it will create a new partition of the interval. Make sure the border is really an end of month, if that's what you want.

  If your data sample had this

  INSERT INTO sales

  (SALES_DATE, STORE_NUM, QTY_SOLD)

  values (to_date('05/10/2016','DD/,MM/YYYY'), 1, 10);

  INSERT INTO sales

  (SALES_DATE, STORE_NUM, QTY_SOLD)

  values (to_date('31/12/4000','DD/,MM/YYYY'), 1, 10);

  So for the step #2 above use split date 06/2016 so that the line above for 10/05/2106 goes to the new partition and 12/31/4000 stays in the old.

  Then, drag this old and lines in it (31/12/4000).

  You can NOT split the last partition if interval is always on because it is the last partition interval.

  And as long as you have given for 12/31/4000, you will get no new partitions unless you insert was more TOP than this.

  So if you want partitioning interval to activate again 06/2016 that higher data would be deleted and the score he falls.

  You have discovered only among "traps" with the help of partitioning of the interval. Oracle will happily create new partition needed to keep the data. If ANYONE, even accidentally, between a date as 12/31/4000 that nobody would ever know until the new data seem to DISAPPEAR for some use cases.

  This is because all data will start to enter this new partition ACCIDENTALLY created instead of a partition for the month, it's part.

  And, and you have discovered, you cannot split this partition directly.

  Delayed segment creation can allow you to pre-create the partitions ahead without actually affecting the segment for them until the first row is inserted.

  Interval partitioning will create the appropriate partitions but not if someone accidentally or intentionally, data will be a valuable capitalized in the table.

• HP Officejet Pro 8500 A909g: B87126D0 - turn the power off and then on again - Officejet Pro 8500 A909g

  Printer displays this error.  When I turn it off it automatically re - start, head cleaning cycles and system then, checking everything as you think it is all new sorted, it goes back into the error.

  I tried without clogging and the location also.  I tried to turn off the wireless cable connection but the loop continues.

  I've seen other posts on this error of 2013 and 2014 but don't know if the answer is the same today?  Can you please suggest a solution?  Thank you

  Welcome to the HP Forums @MrsNoName2013

  I came across your post about the problem of error code you encounter and I wanted to respond to help with my suggestions. I have some links to share with you, because the error code could be coming during a network installation, or it could be a type of system or the cartridge of the problem. I wanted to cover all the bases to try everything and nothing. If you do not connect the printer to a network, you can ignore the first link and go the other links.

  If the problem persists after troubleshooting, please try to call the hotline to discuss replacing the printer or the rating of. I will include HP contact info below to reach them directly.

  1. The "Bxxxxxxx" Error Message appears on the product during the installation of network
  2. A message 'Replace the ink cartridge empty next' on the all-in-one after I installed a new cartridge
  3. A "alignment failed" Error Message appears on the printer control panel
  4. "The following printhead appears to be missing or corrupt" or "the following printhead has a problem.

  Please click the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• HP Photosmart premium c310, Windows 7 (64 bit) series will not work afterit is turned off and then on again

  I have photosmart all-in-one c310 printer and whenever we have a power outage, the printer will not print at startup power upward. I have spend hours trying to download drivers or updates and check the printer that says it's fine and the computer that says it can't find the driver. The last 2 times I finally got running again, but I did something different every time and I don't remember what it was. I just spent 2 hours on a hamster wheel keeps back me for a download, after you download it twice, I finally understood was the SAME download (the 3rd time I was directed here) and the printer STILL does not work. I'm pulling my hair out and I'm about to throw this worthless piece of scrap metal by the window. Help!

  Are you connected wireless? If so, you will need to reconnect the printer to the network of the SCW wireless on the printer itself. When you have power, he can hit just the printer off of the network from the router and just reconnect.

• Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is restless))

  Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is agitated and it is not difficult to work with him because I like and what I should I do?))

  Serial number C02FD2CPDF8V

• I have a MacBook Pro.  Is there a way to implement a rarely used keyboard key that - WHENEVER - it is pressed the computer will insert the string, predetermined character at the cursor position?

  I have a MacBook Pro.  Is there a way to implement a rarely used keyboard key that - WHENEVER - it is pressed the computer will insert the string, predetermined character at the cursor position?

  Yes. You can add in system preferences > keyboard > text.

• Should I upgrade my macbook pro at el capitan 2015? How is the performance on elcapitan? give your opinion! Thank you :D

  Should I upgrade my macbook pro at el capitan 2015? How is the performance on elcapitan? give your opinion! Thank you

  My iMac with 8 GB or RAM 2011 works very well with the 10.11.2 was last updated. It is up to you to decide. It should work perfectly on almost any new machine of 2015.

• I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility.

  I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility. However, the next time you start, the startup process is blocked to halfway to new (on the screen with the toolbar and the status of apple). I want a more permanent solution to reinstall the operating system every time. Would appreciate someone's suggestions and thanks in advance.

  Replace your hard drive.

  You have a backup of trust? If not, buy a disc of exterrnal for that as well.

  The progress bar from the left end at the beginning of the commissioning indicates that your drive has been so damaged, it could not be mounted. Five minutes of progress bar is shown as it does the equivalent of disk utility (ERD [Directory]). If you have reinstalled several times and the problem is not fixed, your drive is in solid form.

• I installed CC on my desk. I installed CC on my MacBook Pro. MacBook Pro is crushed, borrowed friends PC to finish the job. Bought a new laptop Mac, downloaded CC and guest has asked since I already had two installs woud I want to Deauthorize all computer

  I installed CC on my desk. I installed CC on my MacBook Pro. MacBook Pro is crushed, borrowed friends PC to finish the job. Bought a new laptop Mac, downloaded CC and guest has asked since I already had two installs woud I would remove all of the other computers to download on the new Mac laptop, so I said yes. Downloaded CC to new laptop Mac and now it says I have a 30 day trial which has expired, then no. CC new lappy. How can I fix it?

  Try to connect and then insert it again.

  Sign out, sign in | Creative office cloud app

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

• I have Lightroom 4 purchased in disc download format. I'm considering buying a MacBook Pro, but it's not a CDRom. Can I use the serial code for download on MacBook via the internet? I've only used once disks for my iMac.

  I have Lightroom 4 purchased in disc download format. I'm considering buying a MacBook Pro, but it's not a CDRom. Can I use the serial code for download on MacBook via the internet? I've only used once disks for my iMac.

  you need a serial number for mac lr.  the serial number for pc and mac are different.

  Lightroom serial number is unique because it is cross-platform: works on PC and Mac.

  Same serial number for both.

• I need help! I try to open my PDF but I get this message on my Macbook Pro! "Before you display PDF documents in the browser, you must launch Adobe Reader and accept the end user license agreement, and then quit and relaunch the browser."

  I need help! I try to open my PDF but I get this message on my Macbook Pro! "Before you display PDF documents in the browser, you must launch Adobe Reader and accept the end user license agreement, and then quit and relaunch the browser." What should I do?

  Do exactly what the message says, and it will go away.

• Hello! I've got CS3 Design Standard - real records and certificate of software license. It was installed on my laptop that crashed and could not be uninstalled. I have now installed on my new MacBook Pro, but can't get it registered with the

  Hello! I've got CS3 Design Standard - real records and certificate of software license. It was installed on my laptop that crashed and could not be uninstalled. I have now installed it on my new MacBook Pro, but can't get it registered with the serial number. Is it because it has not been uninstalled on the previous laptop? What should I do now? THX!

  Maybe this can help someone else...  I had to simply properly uninstall CS3 and reinstall again after that.  I think what he sort!  I also remember having a similar problem with the Mac at work a couple of years back.  Not sure if it is the same for CS5/CS6.  Here is a link on how to properly uninstall CS3 on Windows XP, Windows Vista and Mac OS.  I'm on OS X 10.9.2 but it works beautifully.  Remove from Creative Suite 3 and CS3 products