synchronization of time of Windows with different servers.

Similar Questions

• Synchronization of time of Windows 7. Tracks update every week. How to change that to 5 min? __

  I was able to install a task to do every 5 minutes but I do not know the location of the program that performs the update.

  Thanks Khaled.  All this you said I already know.  What I don't know, is the name of the program and the location of the server time to update program.  If you have that I'll be able to schedule a task to update more than once a week.  Problem is my system clock is running fast 4-5 dry about an hour and requires that the software that I use the time to be specific to with in seconds so I would update to run every 5 minutes.

  Here is the answer you are looking for RGretz. I give the answer fo Windows7 home premium. After entering administration tools and enter task scheduler, there is a drop down in the lower pane. Use the slider to the right to access. It should be the 3rd window down. Use the slider on this window and go down to "synchronize the time". Double-click the line for that, and it will open a window of three components. Click on "synchronize...". "(this is what will show 'Synchronize Time'). in the right pane, click 'properties '. Click on it and it will open 'SynchronizeTime Properties (Local computer). Click on the tab "triggers." The default value is "Weekly -" every Sunday at 01:00 Emphasise that, then click on the button 'modify' at the bottom of this pane. Will open a new window titled "change the shutter." Select the bubble fill-in "daily" in the "settings" section, and "Repeat task every:" in the "Advanced settings" section Select "5 minutes" in the menu drop-down and click 'OK' on the components that you can close the others. You're Golden then, or should be. I tried to figure this out for a while. Updates to electronic Manufacture\Computer

• How to synchronize the time on windows 7 with a domain controller?

  I have a mixed environment with computers Windows 7 and XP computers. A NET TIME command on the script works fine with the XP computers, time synchronization with that of the domain controller. But it does not work on Windows 7. When you try to run the command mannualy, I get the following error:

  Error system 1314
  User does not have a required privilege.
  How can I synchronize time with domain controller?
  Thank you
  Rafael

  Hi Rafael,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT audience Pro on Microsoft Technet. Please post your question in the Technet forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/winserverDS/threads

• BlackBerry 10 cannot delete the email account (unauthenticated) / cannot authenticate the email account with different servers SMTP and IMAP (a gmail)

  After updating the OS on my last night in 10.1.0.4181 Z10 (software) / 4633 (OS), all my accounts set up asked for credentials must be verified. Looks like now that it uses some sort of mechanism of OAuth - worked well for my Gmail accounts with two-factor auth.

  One of my accounts that I have Gmail as IMAP server (using a regular gmail.com account), but another SMTP server, with the address on a different domain. I use Gmail as my email client, basically.

  After the upgrade, I am prompted to authenticate, but at some point, someone on my domain set up Google Apps. Has never been for nothing. I wonder to enter * that * password via Google. I don't, and this is NOT the account that I'm trying to connect. (I want a server with user name [email protected] gmail.com IMAP and SMTP [email protected]).

  So I'm stuck... can not authenticate.

  Even worse: Also, I can not delete the account! Delete option is not available until after you have again authenticated. Because I can not delete the account, I can't try to add it again separately - I get an error indicating that the account is already configured.

  All options except wait for the next update of OS or do a wipe/restore?

  (Wipe/restore is really not an option for me, it takes several hours, and the last time I was forced to restore, I lost a good amount of data that I then had to enter manually in restoring to my old 9790 and then it tapping on my Z10.) Not to take this risk again).

  Try this:

  Open an e-mail account with the same account information and email address, but as a pop account to synchronize the account. Both accounts now appear in a new sub-account. Now you can remove the two accounts together. It worked for me...

• Can I change the default settings for the latency time Serial Windows with LabVIEW

  I have a wireless data collection device that my business is that I am using for the test one of our other wireless products. The device sends data series to a PC via a USB port. I wrote an automated LabVIEW program to test all the functions of my new product. However, after firing in the data, I realized that the serial data coming very fast and requires me to change latency of Windows by default for the port COM 16ms 2ms Miss not nothing. It's pretty easy for me to do locally on my machine, but much more difficult for me to spec for an off-site CM.

  Is it possible to have my LabVIEW program change the latency time of the COM Windows port of 16 ms to 2 ms automatically?

  Are you talking about the FTDI driver? I know that they allow these changes through registry settings. Thus the approach would probably be to have a small registry script that updates the parameter of function. Most likely, this will have to be run with elevated privileges, as these parameters resident generally in the HKLM or HKCR rather than the HKCU one hive.

• I get an error, "the executable file that this service is configured to run does not implement the service" when I try to synchronize the time in Windows XP.

  After trying to fix the error of time synchronization by typing net start w32time that receipt of the message in the title.  In addition, type net stop w32time responded that the service was not working.

  Original title: the executable that this service is configured to run does not implement the service

  After checking the configuration in the registry and check or update if necessary from the link below:

  Then the time errors that I got from the command prompt window:
  Order--> net stop w32time & net start w32time
  Response--> The Windows Time service is not started.

  Order--> net start w32time
  Response--> system error 1083.
  The executable program that this service is configured to run in does not implement the service.

  --> Command w32tm/Resync /rediscover
  Response--> sending command to local computer resync...
  The following error occurred: the RPC server is unavailbale. (0x800706BA)

  Hi Mitchell_G,

  Thank you for keeping us posted.

  The steps of items offered in the previous post?

  We know if you need help. We will be happy to help you.

  Thank you.

• run a window with different active tab

  Hello...
  I want to run window region and language in the third tab to open the 'change keyboard' dialogue so that I can change the page layout. I use

  > %systemroot%\system32\control.exe/name Microsoft.regionandlanguage

  to open through. I want to use auto-raccourcis keyboard to directly open the keyboard and language, better yet the button 'change keyboard' tab in this tab. Can someone guide me how I can give arguments to run the command to do this? Thank you!! :)

  If you use Auto-touche to fast access, simply tell your script to send the letter that is underlined when you press Alt on this screen.  For example, press the button "change settings system...» ", you'd send Alt + C.

• How to install a windows with different runas service account

  Hello
  I would like to ask, how can I change the account to connect to the course, I install the service. The default service account is localsystem. I would like to change in administrator or another account. The service needs to access the reader to share in the other server. If use the localsystem account, the service cannot access the network. someone has some idea for my case. I can't change it when it is installed, because I need to deploy the service of thousands of machines.

  Thank you
  Nicholas

  Hello

  1.) deploy the application on workstations
  2.) develop a batch script to automate the changing of credentials to services
  SC config obj = pass =

  You can use the administrator and the password admiistrator for the batch script.

  Don't forget to vote too useful for others and to accept the proposed response, if it is relevant build it KB in this Forum.

• Any server time I select to synchronize the time with, it is said: ' year error occurred while Windows timed with, (insert.server.here).

  Choose any server to synchronize the time with, it says, "an error occurred while Windows timed (insert.server.here) with," can someone please tell me why this is, or particularly how to solve this problem?  I am trying to connect to NetFlix with Windows Media Center, and as you can probably guess, I'll have no chance.  He told me, INVALID TIME SETTINGS.  Your computer's clock is set for an hour and invalid date or is not correctly adjusted for daylight saving time.  Update the settings of the clock, then try again.  Even when I set the time manually it will not work.  I just don't understand.  Help, please!

  Hello

  How to fix synchronization of time Internet - add your own time server
  http://www.edbott.com/weblog/?p=1779

  Dealing with Windows Vista time sync problems
  http://www.howtogeek.com/HOWTO/Windows-Vista/dealing-with-Windows-Vista-time-sync-problems/

  Synchronize your clock with time servers Internet from the Vista command prompt
  http://www.howtogeek.com/HOWTO/Windows-Vista/sync-your-clock-with-Internet-time-servers-from-the-Vista-command-prompt/

  Time synchronization on Windows XP and Vista with Internet
  http://www.techexams.NET/blogs/jdmurray/synchronizing-the-time-on-Windows-XP-and-Vista-with-the-Internet/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Everything was fine until my Windows 10, lost the start feature, if I ever go back to Windows 7, in this process, I lost my Adobe Reader software, I tried about ten times with different versions and different locations, all with the same download error

  Please forgive me for not knowing how to use this forum, I am an old man and not good at computers, I called Adobe, they said it was my only hope!

  Sorry to repeat

  Everything was fine until my Windows 10, lost the start feature, so I had to go back to Windows 7, in this process, I lost my Adobe Reader software, I tried about ten times with different versions and different locations, all with the same error message that is download "the feature you are trying to use is on an unavailable network resource"... are looking for It seems that it does not find when I search there, and I no longer seem to have the AcroRead.msi... the most difficult file, I try, I get deeper and deeper into things I don't know... I am looking for a simple solution!

  When it gets to this point, it is probably better to start from scratch.

  First of all, download, install and run Adobe Reader cleaning tool to get rid of all remains little. Here is a link to the tool: Download Adobe Reader and Acrobat tool - Adobe Labs

  Then go to the following link to download the full installer for the reader.

  https://get.Adobe.com/reader/Enterprise/

• How can synchronize 2 direct vms with different ip address

  Hello

  I have a question I have 2 virtual machines, their data are exactly even now I want to know is there any wany to synchronize their data?

  I don't want to use VR because vr can't the VMS syn 2 which turn on it just can make a sgadow of the one on the host of othe

  now I want to have 2 virtual machines with different ip address, and in time, they can synchronize data

  Best regards

  Babak

  There are no methods that can be used that will do what you are trying the hypervisor layer.  It will be done in the comments.  I would recommend for your machines two windows RoboCopy, and for your two Linux guests recommend Rsync.,.

  There is not much more that we can really say here, that you excluded the VMware replication as your need to have different IP addresses in the two guests.

• problem with windows 2003 vpn servers. and xp pro clients vpn using bridge nic

  I have installed 2 guests windows 2003 on 2 laptops. both are configured with 1 CC of backend and frontend 1 nat/vpn server that has 2 interfaces, a bridge and one configured for host only.

  I configure nat on both servers windows 2003 rras and vpn services and have them connected to my local network. they are able to access internet, ping between them and other computers on the network, as well as the host systems on which they run.

  the problem is that I am not able to connect to the vpn servers remotely from inside a guest virtual machine. I wanted to try a vpn site-to site between the guests 2 windows 2003, but the operation failed.

  I then tested customer to type of a guest virtual computer pro xp vpn server. It is also a failure.

  but I discovered that if I initiate a VPN from any one of the host computer system laptop or another computer on the physical network I am able to connect to the vpn servers I have set up.

  I wish I could have these laptops to operate normally and

  time to time be able to turn on virtual machines with vpn

  servers and test as dfs things and replication active directory as if

  they were running 2 separate real-world offices. the two laptops have invited Setup for 192.168.0.0 networks with subnet mask 255.255.255.192. each host that it supposed to be running a 1 subnet for the popular virtual machine with the servers vpn/nat connect together the 2 sites.

  laptop computers are running xp pro and vista ultimate as the host systems. I'm only using the windows firewall but also tested with them disabled vpn connections. also launches the service ipsec on laptops to secure internal lan traffic, I have also tested with two guests with disabled ipsec.

  is there something I'm missing here with the installation of the vmware bridge network?

  Oh I forgot to mention, I test using pptp and ms-chap v2

  I managed to do work by unchecking the tcp/ip settings and the microsoft file sharing on the bridged NIC resaeau.

  now it works very well but who explain to me why it cannot work when you are using the same network as the host card. they all have two different ip addresses and mac addresses. but something seems to be in conflict

• Order to internal model with cRIO, synchronization of time loop

  Hello

  I work with control design Simulation & toolkit and I want to implement an internal model control to a real-time target. I want to implement my simulation (as an attachment) to the real target (cRIO-9024 OR cRIO-9112). I removed the transfer function of the process, I broke the line and I added my input/output of the cRIO modules. I put a 1ms, Euler ode solver step size and synchronize the time loop. Unfortunately it does not work properly. The loop decreased the speed a lot and I can't get 1 ms response time and, finally, a good answer for my system. This means that I can not 1ms response for loop? What is the problem of the computer, windows or hardware real-time or software? Simple or I did something wrong? All the advice you will enjoy.

  Kind regards

  Kamil

  
  

• After changing the motherboard in my PC the device software windows 7 cann't be activated. I tried many times to speak with the service the customer but failed.

  After changing the motherboard in my PC the device software windows 7 cann't be activated. I tried many times to speak with customer service through automated phone system, but failed. Now what should I do.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  --------------------

  Windows 7 - version comparisons:

  http://Windows.Microsoft.com/en-us/Windows7/products/compare-editions

  MS Windows 7 store price:

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  --------------------------

• I can not install any application Windows store. incorrect time showing a time 0 * 80080008 another time 0 * 80072efe all time showing like this different type of error.

  I can not install any application Windows store. incorrect time showing a time 0 * 80080008 another time 0 * 80072efe all time showing like this different type of error. first time using windows 8.1 but restore for windows 8. but problem still. How do reslove this problem.

  Hi Anish,

  If you receive the error 80072efe or 80080008 when you use Windows Store, the cause may be an interruption of the connection between your computer and the Windows Update service.

  Here are a few methods you can try to solve this problem.

  Method 1: Run the Windows Update Troubleshooter.

  Open and run the Windows Update Troubleshooter to fix the problem automatically.

  Method 2: Run the troubleshooter for Internet connections.

  Open the network troubleshooter utility by hitting at full speed in the straight edge screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), inbound to identify and repairin the search box, and then tapping or identify and repair network problems.

  Method 3: Restart the Windows update service and check.

  a. press or press the Windows key + R, type services.msc and press ENTER.

  b. If you are prompted for an administrator password or a confirmation, type the password or click continue.

  c. find the Background Intelligent Transfer Service and check the status.

  d. If the status is stopped, click Background Intelligent Transfer Servicesand then click Start menu.

  e. search Windows Update and check the status.

  f. If the status is stopped, click Windows Update, and then click Start menu.

  g. close Services.

  Method 4: T emporarily disable the security software and verify.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  You can also check out the link and check if it makes a difference.

  Solve problems with a soft

  Please an update of the results to help you further.