Synchronization problems Tungsten E2 - HELP!

Similar Questions

• Problems of synchronization in loops. Help, please!

  In my connection to labview program, I have problems with my timing.  To give a background: I have random numbers generators put out numbers and from time to time, I hit my Boolean button and it collects the numbers of the generator and is the average of the numbers and sends it to a spreadsheet.  But after that first, I press the button, if I press the button within 5 seconds after the first data is collected, it will only collect data until 5 seconds after the last round of data is collected.      But, I press the button sometime after 5 seconds from the last set of data was collected, it will collect numbers as usually, but it also collects data on the right when I press the button and then it collects after 5 seconds.  I don't want these numbers right when I press the button.

  Is there something wrong with my calendar that I have these problems?  Any help would be great!

  Thanks in advance

  Make the mechanical action of the "lock" button by releasing

  In the innermost loop, wire one "equal zero" between the final iteration and the entrance to 'reset' of the time elapsed express VI. This will ensure that the timer resets each time that the loop begins.

  Place a small wait in the case of FAKE fat. There is no need to check the key to millions of times per second. You cannot click that fast anyway.

• iPod connection and synchronization problems classic160GB

  I have a well taken in charge iPod classic 160GB. Worked perfectly until...

  Since the upgrade to the latest OS (iMac), I've been prone to random error when updating of my music. Essentially (1) the device is still connected and there is no apparent way to perform a good ejection process (2) and synchronization fails after many hours and don't care only about 100 songs.

  Thus, it seems that the iPod is ok mechanically. I have reset the device and formatted the HARD drive. This allowed then the synchronization process works correctly. Yesterday I downloaded the songs on the iTunes store and wanted on the iPod - same problems error has occurred.

  Would it not make sense to go back to an earlier version of the operating system? and iTunes? (same iTunes appears unstable now...)

  I see that this timing issue is quite common with this unit holders and it seems to be common, because support was arrested for this camera - I'd be cynical? Why isn't Apple in the face of what it comes to very bad reputation management - total contempt for Affairs of its user base?

  I always use what is apparently a good piece of hardware, but I'm extremely frustrated as a user. Any body found the corrective action? If so, what is it?

  LAST: I left Apple and bought a Sony HD camera. Why? as a result of these frustrations. I'm now evaluate whether to consider other Apple devices that are close to replacement (viz, Ipad, MacBook Pro (17 "), iMAc) with non-Apple devices. This is how frustrated and I'm in a bad mood.

  Please, if you know a solution, I am very willing to try that.

  Problems with synchronization is often caused by a hard drive which becomes unreliable.  Hard drives are mechanical and ends by fail, computers and iPods.  I have much older iPods (4th gen, 3rd generation and iPod mini) that are more than 10 years at this point.  They still work perfectly fine with the latest version of OS X and iTunes.  I replaced the fragile hard drives in three of these iPods with Compact Flash card or an SD card on an adapter.  For the 5th generation and later iPods, you can look here for more information

  https://www.iFlash.xyz/

  I see that this synchronization problem is quite common with this unit-holders...

  It's not just 'common good' considering there are millions of iPods (with storage on hard disk) still serving there.  However, if you see more cases of these days, the reason is obvious.  They age, on average.  The iPod classic model was released back in 2007.  Old things tend to start fault for various reasons, including defective hard drive.

• Problem with the help and support after Windows Update

  Hello

  After downloading some updates from microsoft, I now cannot open the option "help & support". It is said ' sorry Internet Explore cannot download / help.

  Anyone got any ideas how I could restore the option ' support & "?

  concerning
  Dale

  Hello

  It would be useful to tell us what operating system you have and what computer you have. Regarding your problem:

  who help and support option do you mean? Help windows?

  Moreover, already checked the website of microsoft? Would be useful for you since almost all topics around the windows are covered here.

  Visit this link for the support of the MS Web site: http://www.microsoft.com/europe/

  Welcome them

• My wifi cut continuessly and I bought an optus modem and im having the same problems can anyone help?

  what I did to my computer?

  what I did to my computer that makes my wifi cutting continuessly and I bought an optus modem and im having the same problems can anyone help?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  Method 2:

  Try to update the latest drivers for the network adapter and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• Problems with the help of web camera, it shows it programs and on the desktop. But when I double click on it. It will go to the program do not know what to do. Help, please. Thank you.

  Having problems with the help of web camera program does not work when I click it. don't know what to do. Please help thanks.

  Hello

  Right click on the shortcut tab icon - properties - look on the target line to see where and what type of program
  is supposed to work.

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows 7 problem, I need help missing \Boot\BCD

  HII all,.

  I use Windows 7 is now a month when ago I installed... I use my laptop with no problems... But today, when I turned on, I got a black window with messeg...

  WINDOW BOOT MANAGER

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click Next
  3. click on repair your computer

  If you do not have the disk, contact your computer manufacturer or the system administrator for assistance

  File: \Boot\BCD

  Status: 0 xC0000001

  Info: An error occurred trying to read the boot configuration data.

  So that's what I get when I turn on my lap top

  So I try to put the DVD for windows 7 and install again, but I get this error again

  \Boot\Bcd is corrupt abd unreadable.please, run the Chkdsk utility.

  Average BCD Boot Configuration data

  Then I try my best to make all step of microsoft, I found, but does not not so far and I don't know how I can fix this problem can someone help me please?

  First of all, you have to work to Win 7. My problem was on a desktop, not a laptop. I also assume that you do not have many HD with dual-boot OS partitions. Just reconfigure your hardware & BIOS to the same thing when you installed Win 7 work. If it works, then perform the utility thing.

  I use VistaBootPro to the BCD but try checking on Easy BCD (its free). Start loading changed with Vista. I think that his startup loading posing problem. For a disk bootable for the restoration of files, I use Paragon Hd Mgr, but you can find some freebees with searches on the web.

  Chance.

• Problem with bbwp / HELP! :)

  Hey guys,.

  I'm new to the Blackberry Developer Zone and I am trying to convert my .zip file for the moment I watch the tutorial "develop using the BlackBerry® WebWorks SDK for BlackBerry tablets (1 of 4)»

  Now when I run bbwp it disconnects automatically within a period of a half second or more.

  The top line says: "invalid command line parameters [ERROR]".

  All other lines are just as usual.

  Anyone who knows what is my problem? Please help me!

  Thank you!

  I'm on Mac OS X btw

  EDIT: Got it to work! :$

  Listen to develop using the SDK software BlackBerry® WebWorks for BlackBerry tablets (1 of 4) for how.

  Yes, of course type the following line at your Terminal (Mac OS X). Windows is almost the same:

  / Users/username/bbwp/bbwp /Users/UserName/Coding/Playbook/Test/Test/Test.zip

  And then it's your output:

  [INFO]

  Parsing of the command line options

• Dear Sir, our creative cloud need updating, but always after 70 or 80% update, update stopped creative cloud - (display an error - 184 fetal. How can I solve this problem. Please help me...

  Dear Sir, our creative cloud need updating, but always after 70 or 80% update, update stopped creative cloud - (display an error - 184 fetal. How can I solve this problem. Please help me...

  Please visit get the following message appears when you try to install Illustrator 2015: Exit Code 184

• problem with the help of the conditional formatting on a cell that is defined as the percentage

  Hi all

  I am facing a problem with the help of the conditional formatting on a cell that is defined as the percentage.

  I am using beaches for example:

  is equal to or greater than 10% - green color

  5%-10%-yellow

  less than or equal to 5%-color red

  
  

  the problem is that keeps the value 10% get yellow color when it should get green.

  
  

  i thought that is a rounding issue but when I change the definitions of the cell to learn more decimal places I see this part of the percentage 9.65% and some of them are 10.00% and they are both colored in yellow.

  I also tried to change the way range of 6 to 9%, but values between 9.65% or 5.5% are not colored.

  
  

  I really enjoy your help!

  You know the reason and the solution.

  change the format of the column and go or add a column more with decimal and opt for conditional and hide report.

  Thank you

  http://cool-bi.com

• Does space empty between the video clips a synchronization problem in first?

  In the past, when I wanted a second or two of black space between video clips, I just leave the empty space, which fell to black on each side of the gap.

  Can only cause audio/video sync issues? Can I actually save some black frames and fill these gaps?

  I just loaded a video on Youtube, and it gives me an error message I could have synchronization problems.

  Thank you

  Leonardo

  From my experience, empty spaces will not cause any problem whatsoever.  Done it for more than a decade in every version of Premiere Pro.

• Printing a document in indesign that contains an eps logo. Part of the logo is not printing, but shows a white circle instead of a ball with a gradient. I think that it is an overlay problem - can anyone help please

  Printing a document in indesign that contains an eps logo. Part of the logo is not printing, but shows a white circle instead of a ball with a gradient. I think that it is an overlay problem - can anyone help please

  Try to resave the EPS to the native .ai or .psd format (depending on whether it's raster or vector) and use it.

• Does anyone know an Adobe phone number to call us? We meet a wide range of problems and need help.

  Does anyone know an Adobe phone number to call us? We meet a wide range of problems and need help.

  800-833-6687 (the only one from 05:00 - 19:00 PST, Monday to Friday day US).

  Phone support | Orders, returns, exchanges
  http://helpx.Adobe.com/x-productkb/global/phone-support-orders.html

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Problem with the help of oraext: query-database in the transformation (XSLT 2.0)

  Hello!
  I m facing a problem with the help of oraext: query-database.
  
  In my transformation im try the following (Simplified):
  

  <xsl:template match="*">
    <xsl:variable sqlQuery="select ....."/>
    <xsl:variable name="storeSec" select="oraext:query-database($sqlQuery,true(),true(),'jdbc/xref')/>               
      <xsl:choose>
       <xsl:when test="string-length($storeSec/ROWSET/ROW[1]/STORE_PART_SECTION) > 0">
            <xsl:value-of select="$storeSec/ROWSET/ROW[1]/STORE_PART_SECTION"/>
       </xsl:when>
         <xsl:otherwise>
              <xsl:value-of select"some other val"/>
         </xsl:otherwise>
      </xsl:choose>
  </xsl:template>
  {code}
  
  This always results in +some+ +other+ +val+ !!
  I´v checked the output from oraext:query-database by using getcontentAsString and if I instead test putting the expected output from oraext:queryDatabase in my variable it gives me A100 which is what i expected.
  
  {code}
  <xsl:template match="*">
    <xsl:variable sqlQuery=select ....."/>
    <xsl:variable name="storeSec">
      <ROWSET>
       <ROW num="1">
         <STORE_PART_SECTION>A100</STORE_PART_SECTION>
       </ROW>
       <ROW num="2">
         <STORE_PART_SECTION>XXm</STORE_PART_SECTION>
       </ROW>
      </ROWSET>
    </xsl:variable>               
      <xsl:choose>
       <xsl:when test="string-length($storeSec/ROWSET/ROW[1]/STORE_PART_SECTION) > 0">
            <xsl:value-of select="$storeSec/ROWSET/ROW[1]/STORE_PART_SECTION"/>
       </xsl:when>
         <xsl:otherwise>
              <xsl:value-of select"some other val"/>
         </xsl:otherwise>
      </xsl:choose>
  </xsl:template>

  How to get the correct value when you use oraext:query - database?

  How should you exit? Several item ID with each having a value of the result set?
  If Yes, then you can try following:

• Pinch and Zoom - synchronization problem

  Hello

  Since v25, iPad Apps have a pinch and Zoom synchronization problem. If hitting swipe to a page, you cannot directly Pinch & zoom, using the two finger gestures. Firstly, it must wait 1 to 2 seconds (whats darn long) until you can zoom. Even if the PDF page is fully loaded (already sharp/readable).

  On some pages that do not have something different than the other pages, you must first zoom out, before zooming in works.

  Very strange problem. Someone at alse noticed the same thing?

  I'm using the latest tools of InDesign CS5.5 v25.

  Kind regards

  Yves

  We have seen problems with pinch and zoom on v25. It is not so much a timing problem that the gesture is very sensitive to how far your fingers are when you start pinching. We turn to her with a fix in v26.

  Neil