Synchronize subvis SMU and DAQ

Similar Questions

• synchronize the inputs and outputs on the USB-4431

  Hello

  I have an application that needs to send a signal on the USB-4431 and then capture it with an entry on the same device.

  Aware that I use two tasks to do this, one for input and one for output. I discovered that a trigger (on the RTSI bus) can cycles of sending/capture sychronisé departure operations so that it can be a constant offset between the captured signal and the output signal.

  Unfortunately, the code I found is for Matlab. I can't find an equivalent for it in the C API of NIdaq. The method is described here; http://www.mathworks.in/help/daq/synchronize-analog-input-and-output-using-rtsi.html.

  What I can't understand is how to implement this on the analog input:

  ai.ExternalTriggerDriveLine = 'RTSI0';
  

  Can someone shed light on how to do it?

  The rest of the things described here, seems to be feasible with a normal trigger:

  ao.TriggerType = 'HwDigital';
  ao.HwDigitalTriggerSource = 'RTSI0';
  ao.TriggerCondition = 'PositiveEdge';
  

  Thank you

  Nirvtek

  You can synchronize the HAVE and AO by sharing the start of relaxation between your two tasks.

  Choose one of your tasks as the "master" and the other to be the "slave" (any).

  Set up a trigger to start of digital dashboard on the task of the slave, and set the source of the trigger to be the trigger of the master's departure.

  Assume the following:

  The name of your device is 'Dev1 '.

  I is the main task

  AO is the task of the slave

  Here's what you would do to sync the two:

  (1) create the tasks I and AO in order that you want to

  (2) set up "timing" on the tasks of HAVE it and AO (you choose the sampling rates must be the same or power-of-2 many of the other (for example 100 K, 50 K, 25 K, 12.5 K, etc...))

  (3) configure your slave (the task of AO) task to have a numerical advantage start trigger and make the source is the trigger for the start of the task of the master (the task to HAVE it). In our case, "Dev1, AI, StartTrigger.

  (4) write data (a sine wave, presumably) to your task AO

  (5) start the task from the slave (the task of AO).  The task of the AO is now in the 'Started' State, but given that you've set up a digital trigger early, it won't actually generate data until he sees a numerical advantage of 'Dev1, AI, StartTrigger.

  (6) to start the main task (task to HAVE it).  The task of the AI does not have a trigger digital early, so the software will immediately generate a start trigger, which also causes a numerical advantage on "StartTrigger/AI/Dev1", which causes the task AO start at the same time.

  7) read your job to HAVE.

  You will notice a few 0 at the beginning of your data to HAVE. It's a result of something called "Filter Delay" and it is an inherent characteristic of all DSA devices - see the manual to use DSA and this article for more information on what is and how to cope.

  I hope this helps.

  EDIT: I just noticed that you pointed out an existing C example. It's exactly what you want. I don't know why you have a resource error booked - I tried it myself and (after changing the AO will of +/-10V to +/-3 .5V), it works beautifully.  Try to reset your device to the MAX (or DAQmxResetDevice() of your program)

• How will I know that the synchronization completed successfully and that it is prudent to close the browser?

  I'm working on my desktop PC or on my laptop. The latest Firefox is installed on both computers (FF10.0)

  (1) I don't know if I start synchronization manually (Tools/sync now) or if this is supported automatically on an ongoing basis.

  (2) in any case, how can I know when the synchronization completed successfully, and it is prudent to close the browser.

  I don't want to meet me on the road with my latest password updates or missing bookmarks.

  I do not see in the status information about the synchronization process. It is very disturbing and not exactly which involves trust.

  Your
  John

  Maybe check the synchronization log on the subject: a sync-log page
  
  You can open on: xxxx pages through the bar of addresses as you open a Web site.

• Before you synchronize my iMac and Macbook Pro, in my menu bookmarks, all my favorites were colored icons - now they have disappeared - how to bring them back?

  Before you synchronize my iMac and MacBook Pro, in my Bookmarks Menu dΘroulant, all my favorites were colored icons - now they have disappeared - how to bring them back?

  It seemed to work on my FF 9.0.1 and Lion Mac. When I tried to set this parameter on FF 8.0.1 was ALREADY set to "FALSE". Must be something else?

• Problems of synchronization of calendar and contacts between Outlook 2010 and iPhone 5 s

  I have problems of synchronization of calendar and contacts between Microsoft Outlook 2010 and my iPhone 5 s. I've implemented iCloud and probably, this problem started when I updated the OS 9.2.

  Any guidance would be appreciated.

  Thank you in advance.

  Howdy Kishor,

  Welcome to Apple Support communities.

  As I understand it, there is a problem syncing contacts and calendars between Outlook 2010 on your PC and iPhone 5 s. try to take a look at the article linked below which provides much information about the iCloud application Windows and tips that should help you to solve this problem of general troubleshooting.

  Get help using Outlook with iCloud for Windows - Apple Support

  See you soon.

• I can't download the application for mac windows phone. The message: you are interested in the content is now available in the store. How can I synchronize microsoft limia and macbook?

  I can't download the application for mac windows phone. The message: you are interested in the content is now available in the store. How can I synchronize microsoft limia and macbook?

  Contact Ms and ask them.  Only they dictate where their application is made available.

• Synchronize the video and data - Version tiara?

  What version of DIAdem is required to synchronize playback video and data?  Can I synchronize two videos at the same time with a data source, or does have a video with a data source?

  You need the DIAdem Advanced Edition

  Greetings

  Walter

• Feed Microsoft synchronizer does not and must be closed?

  For some strange reason, after repairing my Compaq Presario 2170 with a disk (SP2), Windows XP Home edition The Feed Synchronizer does not, and he keeps bugging me to this topic.  I wish I could give more details, but I'm bad at typing, and even less to say, these more descriptive things.

  Hi KDC_18,

  ·         You receive the error when executing a specific task?

  ·         What version of Internet Explorer you have?

  Method 1: If this happens when you use Internet Explorer, then check if you have the latest version of the browser (Internet Explorer 8).

  Method 2: If you already have the latest being then, check these settings.

  a. start Internet Explorer 8.

  b. go to tools, Internet Options.

  c. click on content, RSS, then settings.

  d. uncheck all the boxes.

  If you want to start using RSS again, simply check the boxes again.

  Please respond with more information so we can help you best.

• Sony PC Companion - can't synchronize calendar Outlook and Contacts over WiFi

  When my z3 compact new xperia connected to my computer via wifi.

  PC Companion will automatically start the synchronization of contacts and calendar after 10 seconds.

  Everything seems to be ok, but suddenly synchronization fails when it tries to sync contacts.

  When connected with the USB cable everything works correctly.

  but then I have to remember to connect the phone with cable whenever I have add an event calendar with PC or telephone.

  PC Companion software is the latest version and phone is updated.

  Media Go works fine with wifi so it may not be the wifi connection problem.

  Hello and welcome to the community! Since you are new, please make sure that you have checked our Forum.

  For now, it is not possible to use another feature of Media Go and file Explorer, while the phone is connected via Wi - Fi. And I think that's the reason why the synchronization fails

• Data impossible classic BlackBerry PIM synchronization between Outlook and classic

  I have problems to synchronize contacts and calendars between Outlook and my phone. I tried to uninstall and reinstall BB link but it doesn't give any help.

  As you use Microsoft Outlook 2016, I believe that Blackberry link has a compatibility issue with this version on the synchronization of contacts and calendars.

  System requirements: BlackBerry link for Windows

• BlackBerry Smartphones can only synchronize only Contacts and calendar?

  I wanted to replace my Palm Treo with the new BlackBerry 8310.  With the Palm, I could synchronize my calendar and contacts with Lotus Notes 7 through a 3rd party software without going through courier service.  It does not appear that I can install the BlackBerry software without e-mail service because he was unable to access Lotus Notes data.  Any suggestions?

  Thanks for the help of glasses bifocals!  I used Palm products so far and with this being my first BlackBerry device, I'm a novice user.  Your advice was helpful.  I did download the latest version of the Desktop Manager (4.6).  The LNOptions.dll with the 4.6 ends by works very well.  I found that I needed to open Desktop Manager then plug my 8310.  It's not as long as the phone is connected, I could set up my syncroization correctly.  Strange little sequence there, but you sent me down the correct path.

  Thanks again,

  Doug

• How can I synchronize my catalog and photos stored on my PC with my new MacBook Pro?

  How can I synchronize my catalog and photos created on my PC with my new MacBook Pro?  I can't find a tutorial on how to do it.  I have the CC of photographers and Lightroom loaded on my MacBook.

  The easiest way to configure things so that you can use the same catalog on both systems is to put the catalog and the files of photos on a single external drive, which then you exchange between systems as needed. If you configure things properly, you can even avoid having to "link" the picture whenever you pass. You do only through pictures stored in the same folder as the catalog and at the same level, for example say you have "yourname Catalog.lrcat" located at the root of a folder called "Lightroom Sync", then you would need to have all your photos in the same folder "Lightroom Sync", once again to the root, so that the photos to sit at the same level as the catalog (paste all files under a single parent at the level folder of) catalog is easier). Installation like this, Lightroom can use the relative path of the catalog of photos and avoid any need to worry about the convention of naming/lettering of the operating system. Obviously, the hard drive must be formatted such as Windows and OSX have permissions of read/write on the disc, for example FAT32.

  There are other more complex methods, (for example using something like Dropbox), but the method 'all on one disc"is by far the simplest (and probably).

• HOW TO SYNCHRONIZE THE MONSTER AND THE CAMERA?

  I'M TRYING TO WORK WITH CHARACTER ANIMATION. I CHOSE THE MONSTER. I SEE MYSELF ON HER CANERA, I PUT RESET POSE AND THE MONSTER DO NOT MOVE WITH MY MOVEMENTS. HOW TO SYNCHRONIZE THE MONSTER AND THE CAMERA? Thank you

  Hi Luz... You have the track selected in the timeline panel puppet? You need to target the puppet that is controlled by the webcam/microphone/keyboard/mouse by selecting its track. That it arms for registration.

• Major problem. Synchronization of files and fonts does not!

  We are in the middle of a production of big book of 250 pages and files are not in the CC Panel.

  I deleted the content of OOBE and downloaded the latest CC app on my iMac.

  Problem just started yesterday. (I think)

  I found a solution to my problem of synchronization in the iMac

  In the Library/Preferences/com.adobe.accmac.plist, rename or delete this file.

  I got an instant response and synchronization of files and fonts works. But there is no checkmark in the synchronized files folder, but I can live with that.

  Best regards

  Lasse Martinell

• Ask the synchronization of Contacts and calendar via USB while using VersaMail with Exchange ActiveSync push email

  East of the request to add a new feature in VersaMail in a future version. A Palm support Rep suggested I post this here.

  I came across Palm Article ID: 42600 which States "once you set up an Exchange ActiveSync account in VersaMail, you will be able to synchronize the calendar, Contacts or by e-mail via the USB HotSync cable. Would be nice if this was not the case when the synchronization of Contacts and calendar are turned off. A call to technical support confirmed there is no way to do it with the current version of the product.

  I found a competing product, RoadSync from DataViz allows me to synchronize ONLY e-mail with ActiveSync, so it would appear to be technically possible.  The problem with RoadSync is is not a true push email on the Treo 680 and it seems a bit expensive with less features than VersaMail.

  Please consider publishes a new version or a patch to allow synchronization of Contacts and calendar via USB when you use Exchange ActiveSync push email.

  I can certainly present this as a feature request.

  Message relates to: None