synchronize with the external hard drive

Similar Questions

• I have a problem with the external hard drive not detected on the computer as a disk.

  I connected an external hard drive toshiba via USB on this victory 8 x 64 computer that is also a toshiba and the computer doesn't show as a reader in fact it shows that he as a device so what gives. This thing have not even a letter such as C: (what internal hard drive) I watch the little arrow to show you, it is prudent to remove it so it appears here, what does I have a drive bad ext or what? Oh yes, I have tried all my ports even

  Hello

  I suggest you to assign a drive letter for the external hard drive and see if it helps.

  To do:

  a. press the Windows key + R and type diskmgmt.msc.

  (b) if the hard drive recognized in disk management and if there is no drive letter assigned, I suggest you do a right click on the drive and assign a drive letter and check if it helps.

  c. right click paths and the drive letter Change.

  Do one of the following:

  ·         To assign a drive letter if it has not already received, click Add, click the letter you want to use and then click onOK.

  ·         To change a drive letter, click change, click on assign the following drive letter, click the letter you want to use and then click on OK.

  d. restart the computer and check.

  Hope that the external hard drive will not be detected after that.

  Please report if you encounter any problems related to Windows and we will be happy to help you.

• Mid 2012 MacBook Pro starts only with the external hard drive

  I have a MacBook 2012 mid Pro and whenever I try to start it only shows the folder with question mark flashing. But, whenever I plug in my external hard drive, it boots. I also tried selecting the boot drive and the interns don't show, but once in the external plug-in, it shows externally as Macintosh HD. I also tried to reinstall OS X but it says I can't you this player.

  Thank you

  While in the drive external hard, that I hope has the same operating system, can you go to utilities utilities disk-file and run a repair of the internal drive and repair permissions? You could also do the same thing in starting mode of recovery-command keys R at startup. Using the recovery disk utilities. If you can't get the internal drive to show everyone, most likely the drive is bad. Then, you will need to replace it.

• The macbook pro is provided with an external hard drive?

  It comes with an external hard drive in the finder, or you buy one?

  It has an internal hard drive, but not an external one.

  (140751)

• Backup HD on the external hard drive with/without Time Machine backup

  I use a drive external iomega hard so that I can save my Mac hard drive. I used the iomega to back up my old computer before and succeeded with just drag / drop the files I needed. I simply slipped fell the Mac HD icon in my iomega DHM and was able to open all the files inside. It made me skeptical however, if I would be able to open the icon Mac HD with all my files so it was on another mac. All information that I looked upwards on a hd on a disk external drive to backup talk using Time Machine, which I've never used, and was not sure if it's even necessary to use.

  Here's what I mean by dragging my HD on the external hard drive.

  It is not at all a backup. This is just a link to the internal drive. Is there a reason why you do not want to use Time Machine?

• How can I change the icon associated with an external hard drive that is displayed in my computer

  When I double click the icon my computer on my Seagate external desktop hard drive does not display the correct icon. It displays a blank page with the upper right handed with a superimposed replica of a small screen.  I really want to show an icon that looks like the real thing as stated in the icons folder.

  Hi PhilipRoebuck,

  (1) do you get an error message when you try to open the external hard drive?
  (2) where there are changes to the computer before the question?
  (3) is confined to a specific icon?
   
  See the following:
  Method 1:
  Icons change incorrectly in Windows
  http://support.Microsoft.com/kb/2396571
  Important Before run you this difficulty, save your data and close the application. After you run the difficulty, your computer will reboot after 10 minutes.
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756
   
  Method 2:
  How to change the default icons for folders in Windows XP
  http://support.Microsoft.com/kb/310192
   
  I hope this helps.

• Synchronize folders with an external hard drive.

  Can anyone help? I want to be able to sync my library and office with an external hard drive (Freecom on USB) files.  The goal is to be able to maintain an up to the minute backup of all my files, so that the next time my hard drive failure I have to absolutely all backed up. I am aware that that is not only the problem of accidental deletion of files so periodically I will also manually save the backup to a different folder on the same hard drive, or is it also possible to get windows to schedule this backup type automatically)? Or y at - it another way to achieve this level of security of the files without a mirror raid arrays (or spend more money on hardware or software)?

  Try this:

  MS SyncToy

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=C26EFA36-98E0-4EE9-A7C5-98D0592D8C52&displaylang=en

  If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
  My Blog

• Updated the motherboard, processor and RAM and upgraded to Windows 7 Ultimate 64 bit, after upgrade the external hard drive encrypted with bitlocker will not enter the password.

  Original title: bitllocker Windows 7 issue

  Hello

  I recently updated my motherboard, processor and RAM, but I kept my original 500 GB hard drive, and equipped with a hard drive 2 TB extra, after the upgrade, I downloaded windows 7 ultimate 64-bit. After the upgrade I plugged my external hard drive (which has all my stuff important on it, that is to say the photo, video etc.) to realize that I had he encrypted with bitlocker on my old sysem. It allows Me to enter my password, it looks for a USB flash drive key, I did not. My question is:

  Can I replace my old system with the old motherboard, hard drive and the original RAM to remove the external hard drive for bitlocker?

  I still have the file windows.old on my hard drive, I have to restore it and remove the most recent version of windows 7 off the drive. I do this before I rebuild my old PC? I'm stuck here and would not lose all my photos (the wife would kill me!) I would appreciate your help.

  Hello

  Reassembly of the old computer won't help. You will always need the key to open the Bitlocker.

  You can read the articles and check:

  What is the difference between BitLocker Drive encryption and EFS file system?

  Protect your files using BitLocker Drive encryption

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• I have a macbook pro with only 128 GB of hard drive. I installed lightroom and all my photos on an external hard drive. Can I keep my library on the external hard drive also lightroom?

  I have a macbook pro with only 128 GB of hard drive. I installed lightroom and all my photos on an external hard drive. Can I keep my library on the external hard drive also lightroom?

  Yes. Find LR catalog file in Edit/settings/general catalogue. Close LR and go to this place. The catalog file is one that ends by .lrcat - move it where you want. Beside the .lrcat file is a subfolder called Previews.lrdata. You can move, but if you don't not LR will generate new insights. Double-click the .lrcat file in her new home and LR will open with this catalogue. Set preferences in more recent catalogue.

• How to use the book of fonts with fonts that are installed on the external hard drive

  I have all my fonts to a folder on an external hard drive. How can I use font book to manage these fonts? I want to keep on the external hard drive, not book fonts move them to my main hard drive. For some reason, font book does not know where are the fonts and as soon as I show, he sets in motion all the fonts on my hard drive in a folder/library/fonts. NOT what I want! I don't want thousands of fonts clutter up my main hard drive. I just can't understand how the font book. Only option, I can see, it is 'Install' and it is then the copy begins. I read and tests all day and I just can't understand this. Thanks for your suggestions.

  Font book handles only the fonts that are present in one of the folders of fonts on the startup disk. It can disable these fonts, but it won't work as a custodian of the fonts installed also. I would have suggested using a symbolic link to the folder fonts on the external drive to ~/Library/Fonts, but apparently that no longer works: allow to use symlinks in ~/Library/Fonts

• IPhoto migration from an external drive: stuck with hard links to the external hard drive

  I got my IPhoto library on an external drive. To migrate to pictures, I dragged the IPhoto (on the external hard disk) file to the Photos icon.

  Migration went well, but instead of importing data to the external hard drive to my macbook, Photos stored links on the external drive. Now whenever I start the Photos, the system tells me it takes the external drive to view the contents of the library.

  To resolve this problem, I tried to copy my IPhoto library on my macbook and redo the import. It does not work: Photos, said the library has been upsized already (I noticed that the IPhoto library has been renamed 'iPhoto Library.migratedphotolibrary')

  Is it possible to reverse the migration or mark the IPhoto library as not yet migrated? Any other suggestions?

  Thanks for your help!

  Rename the copy of the iPhoto library on your internal drive to 'iPhoto Library.photolibrary '.  Then drag the library renamed on the Photos icon and pictures will create a new photo library on your internal drive.

• When I deleted a picture of my MacBook, why it also remove the external hard drive?

  So I tried to help my wife to free up space on his MacBook Pro by putting all of his photos on an external hard drive. After iPhoto slide the hard disk and wait 40 minutes so that he could transfer, I wanted to make sure it worked. I ejected the disk and then plugged in. Of course, all iphotos were still there. Just to be sure, I deleted one file in the folder on the computer's iphoto. I went to my shock and horror, the external hard drive, that it has been deleted it too! How is that possible? I've been scouring the Internet trying to retrieve this file with no luck. It was not in the trash. There is a tab "recently deleted". Time machine was not turned on. iCloud shows nothing. I can't download any software, because the computer is completely filled. How is it possible that by deleting this folder on the computer he did also leave the hard drive? AND it has not been saved in the trash? I have used PC, and whenever I need something in return, he was ALWAYS in the trash. And if I deleted something on the computer with an external hard drive connected, it would NEVER be removed from the external hard drive at the same time. I'm so frustrated and feeling SO bad that I deleted a folder with important pictures of our kids. Is that what I can do to recover the pictures? Any help is greatly appreciated.

  You used Time Machine at all? I see you say it was not on, but it never on and is at - it a backup Time Machine on the Macbook Pro?

• Cannot transfer pictures to the external hard drive (refused)

  Hey!

  I can't transfer jpg on my computer to my external hard drive all of a sudden. He's worked a lot of years and now when I try to drag the photos on it gives me a stop sign, that white circle with the diagonal line through it. What gives? Any help would be great appreciated! I have a lot of work there.

  Additional information:

  -J' have permission to read and write on the jpg photos, but the disk that he said that I can read only, and there is no way to change this, when I click on the little triangle down.

  -I can drag photos that already exist ON the disk hard ON my desk, but not vice versa

  -All files are jpg files, and they are in a separate folder on my desktop, not from my iphoto library or whatever it is

  -J' also tried to delete the "com.apple.recentitems.plist" of the finder, and nothing has changed

  -The disc model is a "Slim Seagate laptop drive"

  -Here is a photo of the hardrive info:

  

  Thank you

  The external HARD drive is formatted NTFS, which allows you to write on it unless you have a third party app like Paragon or Tuxera.

  You had these software installed by Seafgate in the drive, but it is now obsolete and should be updated.

  Ciao.

• Performance issue with an external HARD drive

  Hi all

  I wish you all a happy new year and good luck for 2008

  I have a performance problem with a HARD drive: 3.5 inch USB 2.0 HDD with Alu - case. (320 GB of capacity)
  The average copy files is about 470 KB/Sec.

  When I connect the external HARD drive to my laptop (for any USB port), I have a ToolTip message: "this device can perform faster - this USB device can be faster if you connect it to a USB 2.0 port. I can assure you, my computer laptop USB USB 2.0 port.

  I conneted my drive external HARD to both PC and I have the same ToolTip message: "this device can perform faster - this USB device can be faster if you connect it to a USB 2.0 port.

  Is this problem known to you?
  I think the problem is in the firmware of the external HARD drive.

  + Other ++ information: +.

  + OS: Windows XP Pro SP2 +.
  + USB port all tested are USB 2.0 +.
  + HARD drive divided on 4 logical drives.
  + Antivirus: Symantec. I had test with and without my antivirus. +
  + I have had this problem for 3 weeks and before that I had no problem. +

  Thanks in advance & best regards,
  Marouane

  Hello

  I got the same info after the connection of a digital camera.
  The same message appears in the taskbar. I simply disbled this message;
  In Device Manager, click the USB host controller, click the Advanced tab, and then check the box at the bottom of the window that says don't tell me about USB errors.

  You must do this for each USB controller listed under USB in Device Manager, so that the error message no no matter which controller is used.

  I goggled for this + this device can perform faster + and got many successes. It seems that this is not a hardware problem, but simply a problem of operating system software

  That s all I can suggest

• My Satellite phone does not recognize the external hard drive

  I recently bought a Toshiba Satellite with Windows 7 Home Premium 32 bit. I connected an external hard drive (brand is seagate) that still works on my previous laptop (Dell), but the system does not overlay the external hard drive. It does not recognize there is an 'external Hard Drive FreeAgent' but when the AutoPlay window appears & I choose "Open folder to view files" it gives me the following message is displayed:

  "G / is not accessible.
  Access is denied. "

  I called the manufacturer of the external hard drive (Seagate) & they told me that it is a windows problem.

  can someone help me? ... Thank you

  Can you please tell us which model of laptop you have exactly?
  Do you use an original preinstalled operating system?
  Are you using USB ports?
  Have you noticed the same problem using all available ports?