Failed to retrieve the kernel symbols does not have not to initialize the monitoring device can not find valid peer to connect to

Similar Questions

• Updating fact retriever does not find M92p AMT/drivers

  ThinkVantage Update Retriever 5.00.0013 does not find drivers for Intel AMT for our M92p, model 2121, Win7 download on our deposit.  https://download.Lenovo.com/catalog//2121_Win7.XML seems to not contain c8amt19us17 or all the other pilots AMT.

  A release with support from Lenovo.  They said deployment of the AMT/drivers via update of the system was not possible and showed me the driver package for SCCM for all drivers for the M92p.

  Personally, this sounded like BS, and I refused to accept their answer.  Before I left for the day I was able to manually add the c8amt19us17.  My mistake was to have initially this marked as not active test.

  Here is the XML

  
  
  
    
    
  
    
    Lenovo
    c8amt19us17.exe /VERYSILENT /DIR=%PACKAGEPATH% /EXTRACT="YES"
    2015-11-02
    82970000
    
    
      %PACKAGEPATH%\ME_SW\Setup.exe -s
    
    
      %PACKAGEPATH%\ME_SW\Setup.exe
    
    
    
      
        <_FileVersion>
          %ProgramFiles%\Intel\Intel(R) Management Engine Components\LMS\LMS.exe
          8.0.0.1351
        
      
    
    
      
        <_OS>
          WIN7-ENT.*
          WIN7-HOMEBASIC.*
          WIN7-HOMEPREM.*
          WIN7-PRO.*
          WIN7-STARTER.*
          WIN7-ULT.*
        
      
    
    
      
        
          c8amt19us17.exe
          87B3182038D6BC85EDCC10EDAEB6647F5228AD27
          44036920
        
      
      
        
          c8amt19us17.txt
          60C053B078BD2E2B1AB6DDE80D5267DBB6F2EAE1
          4081
        
      
    
  
  

• Could not find a way to connect my Sony headphones to my TV Bravia KDL-32BX310

  My TV Bravia KDL-32BX310 has "Audio In" (red and white) female connectors, but there does appear to be an 'Audio OUT', so I can't find a way to connect my new Sony headphones. (It doesn't seem to have a 'digital output'-looking on the site of the port. Help please!

  Hello Gene,

  What is the model number of Sony headphones? Most Sony headphones can be plugged into the Audio OUTPUT of a TV port. However, your TV Sony is not any Audio port OUT but has an optical Digital Audio OUT port. Only a few select Sony headphones have the possibility to connect to optical Digital OUT port of the TV.

  If your headphones do not have the possibility to connect to the Audio Digital OUT from the TV, then, Alternatively, you can connect the Sony headphones to the Audio OUTPUT of the source device port. For example, if you look at the cable program and the decoder has the Audio OUTPUT port, you can connect the headset to the cable box to listen to the sound.

  If my post answered your question, please mark it as an "accepted Solution".

  Thank you for your message.

• Failed to retrieve the kernel symbols.

  Hello

  I was wondering if anyone else has had it before. For some unknown reason, my VM Win7x64 which I use very good for 2 or 3 years has stopped working. When I try to run it, it comes up with the following error messages; I have to click OK to go to the next message. I uninstalled VMWare and I have restored the virtual machine to start a VM work last week. None of them worked and now I need help.

  Failed to retrieve the kernel symbols.

  Could not initialize the surveillance apparatus.

  Internal error.

  VMWare Pro - 6.0.1 (1331545O

  Help, please

  Hi farbeyond,.

  Please see the post of karthikg2013 here: Re: my Virtual Machine unbootable molten

  See you soon,.

  --

  Darius

• Sync symbol does not appear in the tab header

  In the version of Android, Firefox, I configured my e-mail address of synchronization, but the sync symbol does not appear where it should (except the symbol of private browsing). The desktop version of Firefox is properly set up with my account, so I have no idea what I can do now to make it work? Thank you.

  Hi snoreau, the tabs sync on android have moved into their own group of experts on the home screen (also known as awesomescreen).

• Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Disconnect all USB storage.

  Run this tool by do right click and choose 'run as administrator '.

  Of course, all first extract it:

  http://www.Uwe-Sieber.de/files/drivecleanup.zip

  If your XP is 32 bits, use the Win32 folder.

  Reset.

  If you still can't find the drive, assign it a drive letter in disk management.

• COMBOX less symbol does not...

  COMBOX less symbol does not (does not).

  I've added the photo.

  The sign less translates into a separator. For example, you can use less space (' '-') for a sign less.

• Everytime I try to log in my original admin. Account, it is said that it does not find the profile, then product to load a temporary profile instead, one without personal settings or memory.

  Everytime I try to log in my original admin. Account, it is said that it does not find the profile, then product to load a temporary profile instead, one without personal settings or memory. What is that?... and how can I solve this problem?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
  Safe Mode account has no default password (so unless someone changed
  the password should be available).

  Some programs such as the Google Updater (if you've added the Google toolbar,
  Chrome or Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7
  computer by using a temporary profile: "the user profile Service has no logon.

  Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "the user profile Service has no logon. Could not load user profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have visited
  logged on with a temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  ----------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ----------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ---------------------------------------------------------------------------------------------------------

  If you can't access your old account you can still use an Admin to migrate to one
  new (remember to always leave an account Admin who is not used except)
  to test and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

  This is the error message I get after several days of decline in dropbox, my Norton, saying that he was sure loading! I have read and re read most of what people have written, and I have no idea! I'm not a person irritable and can someone put in easy terms what should I do to solve this problem! I read try it who try and read that nothing works. Does anyone know if something works and can it tell me please. Also if someone from Microsoft is reading this why not have you solved this problem?

  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

  Hello

  You did changes to the computer before the show?

  These problems occur because the folders or libraries that you are trying to back up or restore include a reparse point. Analytical points are similar to shortcuts Windows or Unix symbolic links. A point of analysis can be used to point to a file that is moved temporarily to a different drive.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  http://support.Microsoft.com/kb/973455/en-us

  I hope this helps. Let us know if you have other problems with Windows in the future.

• TNS-12545: Connect failed because target host or object does not exist

  Hi all

  I have two hosts with me. 1 host1 and 2. host2. Host1 have ORCL database. And when I'm doing the tnsping to host2 for database ORCL I get error below.

  [oracle@host2 ~] $ hostname

  host2.example.com

  [oracle@host2 ~] $ tnsping ORCL

  AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on 5 April 2014 20:31:40

  Copyright (c) 1997, 2009, Oracle.  All rights reserved.

  Use settings files:

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORCL)))

  TNS-12545: Connect failed because target host or object does not exist

  Here's my tns annually involves Details:

  on host1:

  [oracle@host1 admin] $ listener.ora more

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = ORCL. WORLD)

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = ORCL)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  [oracle@host1 admin] $ more tnsnames.ora

  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora

  # Generated by Oracle configuration tools.

  ORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = ORCL)

  )

  )

  MYTEST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = MYTEST)

  )

  )

  LSNRCTL > status

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=host1.example.com) (PORT = 1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production

  Start date April 5, 2014 20:09:33

  Uptime 0 days 0 h 25 min 1 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file

  The listener log file /U01/app/Oracle/diag/tnslsnr/host1/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=host1.example.com) (PORT = 1521)))

  Summary of services...

  Service "ORCL" has 1 instance (s).

  Instance "ORCL", State LOAN, has 1 operation for this service...

  Service "ORCL. The WORLD' has 1 instance (s).

  Instance "ORCL", status UNKNOWN, has 1 operation for this service...

  Service 'ORCLXDB' has 1 instance (s).

  Instance "ORCL", State LOAN, has 1 operation for this service...

  The command completed successfully

  On host2:

  [oracle@host2 admin] $ listener.ora more

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = MYTEST. WORLD)

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = MYTEST)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  [oracle@host2 admin] $ tnsname.ora more

  TNSNAME.ora: no such file or directory

  [oracle@host2 admin] $ more tnsnames.ora

  MYTEST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = MYTEST)

  )

  )

  ORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = ORCL)

  )

  )

  Please help me what I do in configuring the listener and tns.

  Kind regards

  Michel

  fb767351-A660-4b18-9a9f-73bc141f6a0c wrote:

  Hi all

  I have two hosts with me. 1 host1 and 2. host2. Host1 have ORCL database. And when I'm doing the tnsping to host2 for database ORCL I get error below.

  [oracle@host2 ~] $ hostname

  host2.example.com

  [oracle@host2 ~] $ tnsping ORCL

  AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on 5 April 2014 20:31:40

  Copyright (c) 1997, 2009, Oracle.  All rights reserved.

  Use settings files:

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORCL)))

  TNS-12545: Connect failed because target host or object does not exist

  If your entry for "ORCL" tnsnames decided to 'contact' indicated info.  He tried to send a ping packet to the server identified by "(HOST = host1.example.com)". "  Oracle tns transmitted the request to the network stack of BONES for the resolution and routing.  Here, 'host1.example.com' host name could not be resolved to an IP address, or if it was, it was an IP address that is a dead-end.

  Here's my tns annually involves Details:

  We see the details necessary out of your tnsping tns.  Since the application never had the host (as is obvious in the error message), nothing about the questions of the listener - he never got.

  on host1:

  As your example tnsping host2, and says that the error message obvious host1 is nowhere to be found, like the listener, none of the files of configuration on host1 question - demand ever on host1.

  [oracle@host1 admin] $ listener.ora more

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = ORCL. WORLD)

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = ORCL)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  [oracle@host1 admin] $ more tnsnames.ora

  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora

  # Generated by Oracle configuration tools.

  ORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = ORCL)

  )

  )

  MYTEST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = MYTEST)

  )

  )

  LSNRCTL > status

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=host1.example.com) (PORT = 1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production

  Start date April 5, 2014 20:09:33

  Uptime 0 days 0 h 25 min 1 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file

  The listener log file /U01/app/Oracle/diag/tnslsnr/host1/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=host1.example.com) (PORT = 1521)))

  Summary of services...

  Service "ORCL" has 1 instance (s).

  Instance "ORCL", State LOAN, has 1 operation for this service...

  Service "ORCL. The WORLD' has 1 instance (s).

  Instance "ORCL", status UNKNOWN, has 1 operation for this service...

  Service 'ORCLXDB' has 1 instance (s).

  Instance "ORCL", State LOAN, has 1 operation for this service...

  The command completed successfully

  On host2:

  Okay, the problem being that a client on host2 couldn't solve a connection to hos1, these could be revealing.

  [oracle@host2 admin] $ listener.ora more

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = MYTEST. WORLD)

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = MYTEST)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  Except that in the example, we work with, host2 is the customer, trying to reach a database on host1.  Any listener on host2 is totally irrelevant.

  [oracle@host2 admin] $ tnsname.ora more

  TNSNAME.ora: no such file or directory

  [oracle@host2 admin] $ more tnsnames.ora

  MYTEST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = MYTEST)

  )

  )

  ORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = ORCL)

  )

  )

  It's the only tns configuration file that is important for the problem at hand.  And we already knew what he said, since the output of your command of tnsping.

  Please help me what I do in configuring the listener and tns.

  Kind regards

  Michel

  Is "host1.exampl.com" the real hostname of your machine "host1"?  Or you made that blur in your ad - thing quite legitimate to do this for security reasons.

  Whatever, this is not really a matter of tns, unless of course 'host1.example.com' is really what you put in the tnsnames file, but your server "host1" became really something else.

  Assuming that 'host1.example.com' is the correct value, debugging starts with the following:

  [oracle@host2 admin] $ ping host1.example.com

  [oracle@host2 admin] $ tracerout host1.example.com

• ORA-12545: Connect failed because target host or object does not exist

  Hi all

  I am not able to connect database remotely. I have two servers with the name U.S. and localhost. Here are my coordinates tns:

  Details of the host server we:

  [oracle@US admin] $ more tnsnames.ora

  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora

  # Generated by Oracle configuration tools.

  PROD =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = EN)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = prod. WORLD)

  )

  )

  PROD_STBY =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = prod. WORLD)

  )

  )

  
  

  [oracle@US admin] $ more sysconfig

  Networking = yes

  NETWORKING_IPV6 = yes

  HOSTNAME = US.localdomain

  
  

  [oracle@US admin] $ more/etc/hosts

  # Do not remove the next line, or various programs

  # requiring a network functionality will fail.

  127.0.0.1 localhost.localdomain localhost

  : US.localdomain6 1 U.S.

  Remote Ping US server location:

  [oracle@US admin] $ ping 192.168.188.131

  PING 192.168.188.131 (192.168.188.131) 56 (84) bytes of data.

  64 bytes from 192.168.188.131: icmp_seq = 1 ttl = 64 time = 0,662 ms

  64 bytes from 192.168.188.131: icmp_seq = 2 ttl = 64 time = 0,558 ms

  64 bytes from 192.168.188.131: icmp_seq = 3 ttl = 64 time = 0,566 ms

  64 bytes from 192.168.188.131: icmp_seq = 4 ttl = 64 time = 0,603 ms

  64 bytes from 192.168.188.131: icmp_seq = 5 ttl = 64 time = 0.575 ms

  ^ C

  -192.168.188.131 - ping statistics

  5 packets transmitted, 5 received, 0% packet loss, time 4002ms

  RTT min/avg/max/leg = 0.558/0.592/0.662/0.048 ms

  Details of the server remote localhost:

  [oracle@localhost admin] $ more tnsnames.ora

  PROD =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = EN)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = prod. WORLD)

  )

  )

  PROD_STBY =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = prod. WORLD)

  )

  )

  
  

  [oracle@localhost admin] $ cat/etc/hosts

  # Do not remove the next line, or various programs

  # requiring a network functionality will fail.

  127.0.0.1 localhost.localdomain localhost

  : 1 localhost6.localdomain6 localhost6

  
  

  [oracle@localhost admin] $ cat sysconfig

  Networking = yes

  NETWORKING_IPV6 = yes

  HOSTNAME = localhost.localdomain

  [oracle@localhost admin] $ listener.ora more

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = prod. WORLD)

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = prod)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain) (PORT = 1521))

  )

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  [oracle@localhost admin] $ lsnrctl status

  
  

  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 4 February 2014 16:49:36

  Copyright (c) 1991, 2009, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production

  Start date February 4, 2014 16:42:09

  Uptime 0 days 0 h 7 min 26 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file

  The listener log file /U01/app/Oracle/diag/tnslsnr/localhost/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=localhost.localdomain) (PORT = 1521)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))

  Summary of services...

  Service "prod. The WORLD' has 1 instance (s).

  Instance "prod", status UNKNOWN, has 1 operation for this service...

  The command completed successfully

  Location of ping to the server hosting remote localhost:

  [oracle@localhost admin] $ ping 192.168.188.130

  PING 192.168.188.130 (192.168.188.130) 56 (84) bytes of data.

  64 bytes from 192.168.188.130: icmp_seq = 1 ttl = 64 time = 1.57 ms

  64 bytes from 192.168.188.130: icmp_seq = 2 ttl = 64 time = 0,223 ms

  64 bytes from 192.168.188.130: icmp_seq = 3 ttl = 64 time = 0,577 ms

  64 bytes from 192.168.188.130: icmp_seq = 4 ttl = 64 time = 0,571 ms

  64 bytes from 192.168.188.130: icmp_seq = 5 ttl = 64 time = 0,568 ms

  ^ C

  -192.168.188.130 - ping statistics

  5 packets transmitted, 5 received, 0% packet loss, time 4006ms

  RTT min/avg/max/leg = 0.223/0.703/1.578/0.458 ms

  Connection database target mode ensures via RMAN:

  [oracle@localhost admin] $ rman target sys/oracle_4U@PROD auxiliary sys/oracle_4U@PROD_STBY

  
  

  Recovery Manager: release 11.2.0.1.0 - Production on Tue Feb 4 16:56:45 2014

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-00554: initialization of the package manager internal collection failed

  RMAN-04005: target database error:

  ORA-12545: Connect failed because target host or object does not exist

  Please let me know the cause of this error and it please help me how can I solve it.

  Kind regards

  Michel

  OK, so you have a software firewall (IPTables) running.  By default, it will not be configured to accept connections on port 1521.  You have two options...

  (1) disable the firewall completely.  Run these commands to do this...

  stop /etc/init.d/iptables

  chkconfig iptables off

  The first command stops the service.  The second command prevents revived at every restart of the OS.

  (2) add an exception to the firewall for port 1521.  I'm not a Linux expert, but it should be something like this...

  Change the configuration of IPTables with vi...

  VI/etc/sysconfig/iptables

  Add a new rule as follows...

  -A of ENTRY m state - state NEW-m tcp tcp - dport 1521-j ACCEPT Pei

  Save and close, and then restart the IPTables service...

  /etc/init.d/iptables restart

  NOTE: you must always change the name of this server to something other than "localhost".

• How to duplicate a document with Acrobat DC on Android?  Symbol does not work.

  How to duplicate a document with Acrobat DC on Android?  Symbol does not work.

  This feature is accessible not leave within the Adobe Acrobat DC application. We actively strive to bring the same thing. In the meantime, you can try to do the same thing by using a third-party file manager application to work around the problem.

  Thank you.

• Failed to retrieve the configuration of database file when installing EBS on 2 nodes

  I try to install EBS 12.1.1 on two different nodes on Redhat Linux 5. After properly installing the database on node1 (ebsdb), I started rapidwiz on node2 (ebsapps) to install the application technology. When I get to the screen where it asks "Do you want to create a new configuration or load a saved?", I chose to load a saved configuration, typied in the database connection information (ebsdb.sparkdb.com:PROD:1521) and get the following error. Anyone know what I am doing wrong? I am able to ssh to ebsdb to ebsapps and vice versa, and the database and listener is in place.
  
  Failed to retrieve the database configuration file.

  user564785 wrote:
  What file must be copied from DB node to the node of Apps and what place?

  conf_.txt - http://docs.oracle.com/cd/E18727_01/doc.121/e12842/T422699g54568.htm

  You can copy the file to any place on the application-level nodes.

  Thank you
  Hussein

• When I click on my desktop shortcut icons in the new firefox 4 I get a dialog box that indicates that windows does not find that the website

  I have improved the previous version of firefox to the new firefox v.4 and now all the shortcut icons I used with the previous version display a pop-up dialog box that says that windows does not find this website, check the spelling - address - etc. But immediately after this window opens the Web site loads. I tried to load the original site, delete the old shortcut and drag the new shortcut to my desktop, but Firefox always gives me the same message.

  See:

  • http://KB.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

• I can't access firefox, everytime I try I get that windows does not find the file, I tried it redownloading but he still gave me the same message?

  I can't access firefox, everytime I try I get that windows does not find the file, I tried to download again, but he still gave me the same message. the problem has nothing to do with my internet because it freaks on the internet explore and everythign is fine, just my computer can not access firefox for some reason any. I tried uninstallign it and then install again, but that did not work, I tried to install a different version and it still doesn't work.

  yesterday

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; MSDigitalLocker; FunWebProducts; GTB6; .NET CLR 2.0.50727; InfoPath.2; .NET CLR 1.1.4322; OfficeLiveConnector.1.3; OfficeLivePatch.0.0 .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

  I'm sorry, but you have not answered my questions.

  (1) on the last stage Setup lets you start Firefox, if you keep all of the checkbox "Launch Firefox now", turns on Firefox when you click on "Finish"?

  (2) how did you launch Firefox when you receive the error message? How do you 'by clicking on the freshly installed target Firefox.exe?

  (3) what is the exact error message? (Post a screenshot if you cannot re-type precisely). Text you have posted it lacks an ending quotation mark and does not resemble any message I know.