SyncToy 2.1 'unknown error. Access is denied. »

Similar Questions

• The backup computer fails with the error "access is denied. (0x80070005) »

  original title: computer backup failure

  My computer will be back up to a point, then will be an error "access is denied. (0x80070005) "at the same time, Microsoft security essentials SAIS it detects a potential threat.

  My question is this: if he stops because it detects a corrupted file?  or is there an error with a certain application that prevents a full backup?

  Hi Cyberwasp35,

  ·         Exactly how are you trying to backup?

  ·         You run the computer as an administrator?

  ·         Have you tried a backup on an external hard drive?

  Try the following steps.

  Step 1

  Perform an online scan to remove the threat detected by the basics of Microsoft security during the backup process

  To make online scan click on the link below:

   

  Online analysis of Microsoft security essentials

  http://OneCare.live.com/site/en-us/default.htm

  Try to disable antivirus software and check if the backup is successful.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2

  This error can also occur because the recovery partition is enabled for the file backup or restore of the system and is almost full. To work around this problem, do not select D:\ as a backup source. In addition, go to the System Protection in Control Panel and make sure that D:\ is not activated for restore points.

  (1) open the backup and restore by clicking on the Start button, clicking Control Panel, clicking system and Maintenance, and then clicking the backup and restore.

  2) click change settings.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (3) clear the partition D drive if it is selected, and then try to backup again

  Check if the service is stopped or started. Change it to start if it is stopped. The service name is windows backup.

  http://Windows.Microsoft.com/en-us/Windows-Vista/manage-services-in-Windows-Vista-from-Windows-Vista-inside-out

  Reply back with the results

• System 5 error access is denied

  I just installed Oracle Database 10 g Express Edition and it seemed to work but when I try to launch it I get the message:
  System 5 error
  Access is denied
  
  How can I fix it?

  The problem is that the process start and end must run as administrator. Change the properties-> shortcut-> Advanced-> run as administrator and you should be ok

• When I try to reduce my main hard drive in disk management, I get an error: "access is denied".

  Separated from this thread.

  I also have the problem of access is denied.  I use an admin account in Vista Home Premium.

  Separated from this thread.

  I also have the problem of access is denied.  I use an admin account in Vista Home Premium.

  Other attempts reveal:

  Despite the informed retractable utility Go 70 was available for this operation, when I tried 65Gb, 60GB etc. the message was 'Access denied'.  However when I asked only 50 GB the process completed successfully!

  If 70 GB information (in a partition which was ~ 200 GB free) was available was false or error message should have been some such more meaningful instead of "Access denied" or "ask too much."

• Windows Vista Home Basic will not update, System 5 error, access is denied.

  My windows will not update. Microsoft fixit tool will not install on my machine. When I try to reset the updates manually I get the error System 5, access is denied.

  Hello!

  This link may be useful
  http://support.Microsoft.com/kb/555644
  Thank you
  Makoi

• Error: Access is denied, cannot delete the printer and also impossible to install programs

  Original title: access is denied cannot remove the device

  my Canon MX340 printer worked fine until the scanner stopped working advises by canon for uninstall programs / drivers and icon / as asked today did nothing working and used to install programs / drivers and can not remove the icon from the Control Panel, access is denied. Clues

  THX

  Hi Tony,.

  Please help me with the following information pricing to this question:

  1 is your computer and the printer connected to a network or domain?

  2 are logged in as an administrator on the computer?

  3. What are the programs that you are not able to install on your computer and provide also us whne exact error that you are trying to install programs?

  I suggest you refer to the suggestion provided by Waseemulla Shariff said on March 17, 2012 in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/i-can-not-delete-a-printer-from-devices-and/c0d72c68-0387-45ff-b47d-38318b2090b5

  Once you remove the printer successfully, you try to install the printer drivers from your printer manufacturer's website and check the functionality. Consult the following link:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx340#DriversAndSoftware

  If you are not able to install any program on your computer, I suggest refer you suggestions provided by Sandeep Dsouza said on June 13, 2012 in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/access-is-denied-unable-to-remove-device-HP/1a45f1dd-ba47-47af-90E7-00310a988fcb

  Please answer us on the State of the question to help you further.

• do not open transcend hard drive, getting the error: "access is denied; parameter is incorrect. "

  When I connect my 1 TB transcend hard drive icon only appears in the Local disk and by double clicking on it says access is denied; parameter is incorrect... What do I do?

  Hi Olivier,.

  I suggest you follow the advice given by Nithyananda J on February 9, 2010 and check if this may help.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/i-cant-access-my-hard-disc-drives/71b6c2a4-4031-4f57-9aef-19d11daa4803

  Registry warning: Back up the registry

  Let us know the results. We will be happy to help you further.

• Cannot access the CBS. Error: Access is denied.

  Original title: cannot access the CBS.

  found errors, I can't access the CBS.log file after that sfc/scannow and I tried the commands listed by Microsoft to take ownership of the file but still access denied message. Also I can not get the command that isolates these errors in a text to work file format either - "access denied" message or it takes back me to C:\Windows\System32 > command prompt.

  Hello
   
   
  Try this:
  a. Click Start and type cmd in the search box.
  b. right click on cmd in the above results, and then click Run as administrator.
  c. at the command prompt, type notepad c:\windows\logs\cbs\cbs.log and then press ENTER.
  The article below describes how to analyse the generating log files by the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista. Note: The article is also applicable to Windows 7.
  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I think I am infected by the virus eula.rtf, error: access is denied, if I try to delete the files.

  I think that I have the virus eula.rft... I have about 25 folders with large alpha numberic names and have 27 pieces with 3 file names of the numbers (these are the same names in all 27 files), then the 2 files in each of these files a named EULA and named HotFixInstallerUI.dll, I tried to delete these files and get the "Access denied" response... I downloaded a Trojan Remover of www.simplysup.com that has been proposed for this virus and that did not help and he found no Trojans.  Does anyone have an idea for this old lady who doesn't know too much about what she's doing?  ;)

  Hello
  Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide/
  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
  Brian

• I get error: access is denied during the installation of my adobe photoshop

  Original title: access denied

  Hi all! I would like to ask if what is the significance of this...? and how can I solve this problem... I encounter this when im installing my adobe photoshop and I don't know how to fix this...

  

  You should not install to that folder as it is MORE a temporary folder, it should be installed to your user name

  Why are you trying to install it there?

• Yesterday, I did the Microsoft updates just fine now, today, I get a 403 forbidden error access is denied.

  I am running Windows XP SP3, nothing has changed between yesterday and today, I couldn't get to all computers yesterday.  Any help would be greatly appreciated.  We also have Norton antivirus and it is updated and even once, it has not changed since yesterday when I was able to make updates very well.

  OK, found a fix for this in another Microsoft validation site.  You need to download/install the latest Windows Update agent.  It worked for me:

  These last days, WSUS here is distributes 7.4.7600.226
  x 86: http://download.windowsupdate.com/windowsupdate/redist/standalone/7.4.7600.226/windowsupdateagent30-x86.exe
  x 64: http://download.windowsupdate.com/windowsupdate/redist/standalone/7.4.7600.226/windowsupdateagent30-x64.exe
  Itanium: http://download.windowsupdate.com/windowsupdate/redist/standalone/7.4.7600.226/windowsupdateagent30-ia64.exe

  See if it'll work for you jacqui06

• Error: Access denied... Administrative privileges may be required.

  I am trying to solve a problem with an application (Trend Micro, some files were corrupted), which requires that I have crushed some corrupted files.

  Whenever I do, I get the above error message.  Error: Access is denied.  Cannot create [filename]. Administrative privileges may be required.

  I am the administrator on this computer, and I believe that I have administrator privileges.  I just upgraded to Win 7, I had this problem on Vista.

  So, how can ensure me that I got really full administrative privileges?  Create an administrative user, then delete me?

  
  

  Thank you very much for the help.

  Hi Markb56,
   
  I suggest to create a new administrator account and check if that helps.

  1. click on the Start button and select Control Panel.
  2. click on user accounts.
  3. click on user accounts. Now click on manage user accounts.
  4. click on create a user account. Now, type the account name and select administrator.
  5. click on create account.

  For more information, visit the links below:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
  http://Windows.Microsoft.com/en-us/Windows7/what-is-an-administrator-account

  Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.
   
  I suggest contact you its manufacturer for better help.

  http://us.trendmicro.com/us/about/contact/
  http://community.trendmicro.com/
  http://eSupport.trendmicro.com/default.aspx
   
  Hope this information is useful.
   
  Umesh P - Microsoft Support

• Error access denied when I tried to restore my files saved on the computer after reinstalling Windows 7

  Hi all

  I had to re install my windows 7, so I copied all my desktop files to my external HARD drive and from the new facility, I could not backup or even open most files file (most of them are PDF and JPG files) with annoying error access is denied. I have changed the ownership of these files on my user account and grant me full control over files and the same error still there.
  Also, I enabled the administrator account and tried to open the files with it and without change, also tried in safe mode.
  Any help?
  Thanks and greetings
  Nour
  
  Original title: access Denies

  Nour,

  Try here:

  http://support.Microsoft.com/kb/2623670>

  `~`

  The current time and the date now in Baja California, Mexico

  18:39

  Thursday, August 8, 2013
  DST - 0700 UTC

  UTC/GMT is 01:39 Friday, August 9, 2013

  Current weather conditions in San Felipe

  Sunny106 ° C / 41 ° C

• Problems installing printer Officejet 4620: error "access denied."

  Hello! I'm trying to connect my HP Officejet 4620 via the USB port on my computer Windows Vista x 64. The computer is already installed the HP Officejet 3320. When I installed the driver (version of basic pilot without additional software), installation is 'successful', but after finishing installation a message shows by reading that the computer could not connect to the printer. When I try to print a test page, a message appears saying: 'access denied '. In addition, the other printer which has worked before is no longer works and comes up with the same error "Access is denied.". Have clues on how to solve this problem? Thank you!

  PS:

  I tried to disable firewall and antivirus, I tried to reinstall several times, including in selective startup mode

  Hello electronicreprr,

  If two printers are connected to the computer via USB?

  This article deals with the error you receive, however expressly mentions networked printers.

  "Windows cannot connect to the printer. Access is denied' s ' Please help.

• Connection status: unknown, the dependency service or group could be started. __Windows could not start the DHCP Client service on Local computer. Error 5:Access is denied.

  Good evening!

  About 2 days ago my laptop not able to connect to the internet with wireless on, a brand of red x on the computer icon in the bottom right. When I hover the mouse over this icon, it shows ' connection status: unknown, the dependency service or group could be started. " I check services and found DHCP stopped running, I tried to start it manually, it shows "Windows didn't start the DHCP Client service on Local computer." Error 5:Access is denied. "I did ' sfc/scannow' and found no errors.
  I use a laptop from my friend and it works great! So there is nothing wrong with the router but my own laptop. My laptop runs windows Vista editions Home Premium with Service Pack 2.

  Need help! Please, need to connect to the internet to go to school online. Thanks in advance for any help!

  Very respectfully,.
  Jay2010

  Hello
  Failed to start the Service on the local computer's DHCP Client (applies as well to Vista)
  http://WindowsXP.MVPs.org/DHCP.htm

  ----------------------------------------

  Start - type in the search box-> find CMD top - right on - click RUN AS ADMIN

  You can copy and paste this command, and then press enter

  netsh winsock reset catalog

  ======================

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ----------------------------------------

  Try setting all Windows services on their default values.

  Start - type in the search box-> find Services at top - right click - RUN AS ADMIN

  Vista default services
  http://www.blackviper.com/WinVista/servicecfg.htm

  ---------------------------------------

  Actually try updating your driver: (use a wire or download on another computer and transfer via)
  removable media)

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------

  You can get more help in these forums.
  http://social.technet.Microsoft.com/forums/en/category/windowsvistaitpro

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.