The backup computer fails with the error "access is denied. (0x80070005) »

Similar Questions

• do not open transcend hard drive, getting the error: "access is denied; parameter is incorrect. "

  When I connect my 1 TB transcend hard drive icon only appears in the Local disk and by double clicking on it says access is denied; parameter is incorrect... What do I do?

  Hi Olivier,.

  I suggest you follow the advice given by Nithyananda J on February 9, 2010 and check if this may help.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/i-cant-access-my-hard-disc-drives/71b6c2a4-4031-4f57-9aef-19d11daa4803

  Registry warning: Back up the registry

  Let us know the results. We will be happy to help you further.

• Windows backup will fail with the error code: 2147942402

  Hello

  I'm trying to run a backup on a Windows SBS Server 2008 using Windows Server Backup to an external 2 TB USB hard drive - I chose the backup once and personalized with "activate System Recovery."

  This fails with an error message "the system cannot find the file specified" after having transferred about 28.23 GB of data.

  The Event Viewer error code: 2147942402

  I tried to run the backup to another device (a disk on a PC on a network) and it successfully without any problem which seems to me some kind of problem with the USB key.

  I came across these links: http://support.microsoft.com/kb/979281 and http://support.microsoft.com/kb/976972 - but the server I use does not have a USB Host Controller NVIDIA - instead, there "Intel(r) ICH9 Family USB Universal Host Controller" - so I'm hesitant to try this fix.

  I'll reformat the USB drive to see if that helps...

  Thank you very much

  Adrian

  Hi Adrien,.

  The question you posted would be better suited in the TechNet Forums since we have dedicated to this support; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Keep us updated on the status of the issue.

• The database recovery/restore failed with unexpected error 509

  Hello

  The database recovery/restore failed with unexpected error 509

  In the Event Viewer, I had this error SEVERAL times every second.  He goes absolutely crazy.

  I don't know what to do with it.

  I'm with Windows 8 Pro running on a very stable computer with 8gig of ram, plenty of hard drive space.  Each single drivers updated Windows Update.  Everything is really clean except this error in Event Viewer

  Svchost SRUJet (1624): database recovery/restore failed with unexpected-509 error.

  Task category: registration/recovery

  Esentutl /p /r tried / everything but nothing wrong was found with those

  Thanks for any help.

  Exactly the same problem, nothing Microsoft recommended was the cause, scannow and DISM commands are returned without error.

  So I went to the event viewer and scrolled down to find, when these errors began to occur. So I found a few entries initially saying things like: an attempt to move the file 'C:\Users\xxxxx\AppData\Local\TileDataLayer\Database\EDB.log' to 'C:\Users\xxxxxxxx\AppData\Local\TileDataLayer\Database\EDB00008.log' failed indicating system 183 (0x000000b7) error: "cannot create a file when that file already exists.

  Then, I went to C:\Users\xxxxx\AppData\Local\TileDataLayer\Database\ and removed the files listed (e.g., EDB00008.log).

  Bingo, the errors will stop immediately.

• connection fails with an error via the Proxy OUD

  Have hit a problem with the Proxy of the OUD. If the recorder file or admin-based access is turned on, the link fails with an error

  Below error

  The result Code simple bind attempt failed: 80 (other) additional information: Worker Thread 44 has encountered an exception uncaught during the processing of operation BindOperation (connID = 97, opID = 0, Protocol = "LDAP 3, dn = cn = oudadmin, authType = Simple"): NullPointer

  Hello

  I think that the conditons of occurrence are more complex than just enabling newspapers, but this looks like a bug.

  Please contact the Oracle Support so that a default is created.

  -Sylvain

  Please mark this answer as correct or helpful, when it is appropriate to make it easier for others to find

• When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied."

  access denied for the creation of a directory

  When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied."  How can I fix this?

  When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied."  How can I fix this?

  Only when you try to install this application?

  What about BullZIP PDF Printer?

  (You can uninstall - trying to figure out if it's a problem of Windows or the question of enforcement.)

• The backup has failed. An error has occurred. The following information can help you resolve the error: the request has been aborted. (0x80099704D3)

  Hello, I am running Windows Vista Home Premium and trying to make Windows backup on DVD, I was able to cross 5 DVDs then it asked me to insert the DVD successfully n ° 6 I did and he never finished and I got this error:

  The backup has failed. An error has occurred. The following information can help you resolve the error: the request has been aborted. (0x80099704D3)

  The DVD I have are DVD so I can't rewrite over and over again. Can I somehow he pick up where it left off to complete my backup?

  Help! Thank you

  Lisa

  Hello

  -No, I don't have third-party backup programs installed.

  -J' tried using another disk backup, but it started it count once again as "disk 1" yet I had left off to "drive 6"and I couldn't tell if he has taken over where I left off or starting on even once, I don't want to do because I can't rewrite on my DVD. , because they are disposable.

  Because I needed to achieve this, I advanced and bought more DVD and will continue to backup even if I do not know where she had stopped. I think I can say that it not continue starting above and to the right.

  I think that the problem might have been that DVD #6 was bad, as he had a scratch on her, even if it was new out of the envelope.

  Software AV is not the issue, I am able to do backup, I wanted to just be able to pick up where I left off, as opposed to duty again since the beginning of my documents again. I just wish that Windows backup has been a little easier to use, in particular the fact that it is not "tag" my files to show who we are it is already saved, just like other software, (ex Mozy), which is very useful. And be able to choose what files I need backup rather than being limited to simply choose the 'file type '...

• Cloud to adobe InDesign download fails with shoing error it can not extract the files in the temporary file.  I tried several times and restarted does not.  What can I do about it?

  Cloud to adobe InDesign download fails with shoing error it can not extract the files in the temporary file.  I tried several times and restarted does not.  What can I do about it?

  To refer to EX11 some:

  Creative cloud (WIP) error codes | Error postal codes of Mylenium

  Mylenium

• Backup fails with an error of device 0 x 807812.

  Original title: device error 0 x 807812

  Backup fails with an error of device 0 x 807812. I tried a disk of 1 TB of my book and a Seagate 1 TB Western Digital. Both failed with the same error. The system says that I have the most recent and correct drivers. My computer is Deel Latitude 17r.

  Hi James,

  Thanks for posting your question in the Microsoft Community.

  The error would have occurred if the services associated with Windows backup may have been disabled, you can try to restart the service, follow the steps below:

  1. click on start.

  2 type Services in the start search.

  3. in the search for Windows Services of shadow copy Volume in the list.

  4. right click on the Service.

  5. click on properties.

  6. Select the Startup Type to manual.

  7. click on OK.

  8. repeat the same for the service Windows backup.

  If the problem persists, then I suggest you run the chkdsk command, which fix chkdsk errors, follow these steps:

  i. Click Start.

  II. type cmd in the start search box.

  III. right-click on cmd.exe list programs and then select the run as Administrator option.

  IV. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  v. in the command prompt window, type the following command and press enter Chkdsk /R

  VI. o press when you are prompted to check the drive the next time the system restarts.

  VII. close all applications and restart the computer.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  When you restart, Windows checks the drive for errors, and then Windows starts. Now run the disk check in command prompt, follow the steps below:

  Now, when you try to perform the backup, I recommend that you can try to disable the temporary security on the computer software and perform a backup, be sure to activate security in the computer software.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  If you need further assistance on this topic, let know us and we will be happy to help you.

• Sent to-compressed file works only no error: "cannot complete the operation, access is denied."

  Original title: sent to-compressed file does not
  I'm on my laptop with Windows 7 home.

  Until today, I was able to compress files without problem.  I am the sole owner of the computer and have all the permissions.  I also went the folder I try to compress and checked the permissions it.  It happens on all records.
  When I click on send to - file compressed, I get an error message "Unable to complete the operation, access is denied."
  Thank you
  Holly

  Hello

  You can try the steps by Ramesh Srinivasan April 2. 2009 from the planned similar thread link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/compressedzippedfolder-in-SendTo-missing/bd060bea-5775-4b28-840C-96555f5ed289
   

• I get the error access path/file execution error ' 75 "you try to start a product.

  I get the error access path/file execution error ' 75 "you try to start a product. How will I know which file it is trying to access. Is there a log or something?

  Hello

  1. when exactly you get this error message?

  2 have you made any changes to the computer before the show?

  Please provide more information on the issue so that we can better help you.

  In the meantime, make the boot minimum troubleshooting and check if the problem persists.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note:

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfig and click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer.

• "The backup did not complete successfully. Access is denied. (0x80070005)

  IV got a new pc a few months ago, im (del vostro 220) by getting only round to back up all my stuff now. I've run the wizard, insert a dvdr and follow the instructions. A few minutes later, I get the message...

  "The backup did not complete successfully. Access is denied. (0x80070005)

  You can also view this page.
  Quote:
  "This error occurs because the recovery partition is enabled for the file backup or restore of the system and is almost full. To work around this problem, do not select D:\ as a backup source. Also, go to the System Protection in Control Panel and make sure that D:\ is not activated for restore points. »

• Installation fails with "internal error 2502.

  I have a client that is running Windows Vista Home Premium (32 bit) and my application setup CVI-built fails with "internal error 2502.

  This installation kit has been deployed successfully on hundreds of computers with different versions of Windows, and I never saw it. No device drivers or advanced libraries - just standard execution. I use CVI 9.0.1.

  Some old problems with the Office installation, date/time settings etc. of research show very little - but I still found nothing which indicates what means this error.

  Ideas or ideas very welcome.

  Thank you

  Ian

  Thank you love. It seems that the problems #2 (permissions) were part of it and possibly other problems linked to the virus. It will re - open this computer from scratch. Detective Conan.

• Windows Update KB979482 always fails with 8007065E error code

  KB979482 fails with 8007065E error code. All other updates are successful.

  Running Windows Vista Edition Home Premium SP2.

  Here are a few excerpts from C:\windows\windowsupdate.log:

  ... ~ snip ~

  DnldMgr * updates to download = 1
  Agent * title = update security for Windows Vista for x 64-based systems (KB979482)
  Agent * UpdateId = {8D253BCE-EB56-47C2-AA58-E5D3F7173CC9}.103
  Agent * bundles 1 updates:
  Agent * {BD1DEFF4-A43A-455A-8174-6050A6010AE4}.103
  ... ~ snip ~

  Automatic update fails...

  ... ~ snip ~

  Manager of FATAL: UH: 0x8007065e: CreatePackage failed in CCbs::CreatePackage
  Manager of FATAL: UH: 0x8007065e: StartStagePackage failed in CUHCbsHandler::StageCbsPackage
  Generation of FATAL Manager: request for CBS full update with hr = 0x8007065e and pfResetSandbox = 0
  Manager of FATAL: Source of error is 106.
  FATAL DnldMgr: DM:CAgentDownloadManager:GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x8007065e.
  DnldMgr error 0x8007065e occurred when downloading update; notification of dependent calls.
  ... ~ snip ~

  So I tried to download KB979482 here:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9622 and run it standalone.

  However, when I try this, Windows Update Standalone install displays the message"this update does apply to your system."

  I can live with that (if the message is actually true). But if if this patch does not apply to my system, then why Windows Update keep trying to install it as an update 'important '? How can I get off the list so that the Windows Update log is not cluttered with all of the failed attempts?   Finally, I ran Windows Update Fixit tool available.  He fixed a couple of things (default location, another minor config) but not this problem.

  P.S. running BitDefender 2012 if it matters...

  To answer my own question, you can reset the status of the following method KB2509997 8 download and rename the folder C:\Windows\SoftwareDistribution. It would be nice if there was a less force brute to do this, because she loses all your update story and settings, but at least it works.

• Failed with unknown error 80070490 Windows Update

  Update Windows guard fails with unknown error 80070490 when trying to install to install the important updates made automatically by Windows Update. Having this problem since February 10

  http://support.Microsoft.com/kb/958044

  'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

  Method 1: run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information on how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
     947821 (http://support.microsoft.com/kb/947821/) Description of the system update tool for Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2

     http://support.Microsoft.com/kb/947821/

     Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  2. Try to install updates again.

  Method 2: perform a Windows repair installation

  If method 1 does not resolve this problem, you must perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  See you soon.

  Mick Murphy - Microsoft partner