syntax used to create the tablespace with autoextend

Similar Questions

• To create the GUI with Adobe CC but which package is better to use?

  I have a subscription (instead of find yet another package to use) and the CC thought that there should be something that I can use to create the necessary icons.  Would like to be pointed in the right direction about what software CC I could use.

  I have attached some examples of GUI that I need to create/edit.  The previous creator (which no longer works with companies) used SolidWorks.

  

  The previous creator (which no longer works with companies) used SolidWorks.

  Yes, and it shows... Really ugly stuff. Anyway, there is nothing there fancy that couldn't be created with the most simplistic in Photoshop layer styles, if the items must be scalable. Otherwise of course you would in Illustrator...

  Mylenium

• Can u create a tablespace with these settings?

  I use 12.1 DB. I need to create a tablespace with 1 data file (say abc.dbf), initial size is 10 MB, but I need grow no more than 1 GB.

  I tried the user guide. You can give the initial size of the DB using SIZE 10 M, but I couldn't find a way to give an upper limit for the tablespace.

  There are 2 settings in the DBA_TABLESPACES view.

  Maximum default MAX_EXTENTS NUMBER of extensions

  Maximum default size of max_size NUMBER of segments (in Oracle block)

  There is no clause in measure Network Management of the TABLESPACE CREATE & segment management of the sous-clauses to give a maximum number.

  Is how Oracle works is like, if you create a tablespace with a data file of 1 G, with autoextend NO, then it will grow to 1 G and then stops?

  If so, what did MAX_EXTENTS & MAX_SIZE really means?

  The physical limitations of the database for 12 c gives this information:

  Blocks of database

  Maximum per data file

  Load platform; generally 222 - 1 blocks

  So, if my block size is 8 k, then the maximum size for the data file is just 8192) /(1024*1024*1024) ((2^22-1) * = 32 GB, which is very low for a single file of data?)

  SQL > create tablespace foo

  2 datafile 'c:\temp\foo.dbf' size 10 m autoextend on maxsize 1 g;

  Created tablespace.

• What consideration we should have have before creating the tablespace

  Hello
  I was asked this question in an interview. I have a large volume of data (for example 80 GB). Now, I have to create a tablespace to contain these data. What consideration we should have have before creating the tablespace.
  In fact, I could not answer after a lot of research, so I post here.
  
  Concerning

  Hello

  In 10g, you must create a locally managed Tablespace (MEASURE of the LOCAL MANAGEMENT) If you know the
  size of your Tables/indexes you can choose the size of the scale with the option of UNIFORM SIZE.
  If you have small and large Tables / Index, then choose the AUTOALLOCATE option.

  It is recommended to use SAMS with the SEGMENT SPACE MANAGEMENT AUTO option and then the PCTUSED
  is auto tune by an internal algorithm and FREELIST are managed by a bitmap. With this option, it is best to
  be with the last group of hotfixes.

  About BIGFILE Tablespace, if you use BIGFILE tablespace, you will have just a data file which can extend up to
  4G block (thus 32 TB if you have db_block_size = 8KB). And SQL syntax allow you to manage the 'big' with data file
  the same command for the Tablespace.

  But you should care the limit of your OS. Imagine that your operating system or the file system does not support very largefiles then,
  you have no advantage over the use of Bigfile tablespace. Also, you might have more than 1 data file.

  Smallfile Tablespace using your data files should not exceed 4M block (so 32 GB for 8 KB / block) but you can have
  up to 1022 datafiles on your Tablespace. So eventually, if you use the 1022 data files, you have the same capacity
  Bigfile Tablespace and you can use several system files.

  To 80 GB with 3 or 4 data files, you can easily manage this volume. But of course from time to time you will have to
  Add a new data file.

  Hope this can help.
  Best regards
  Jean Valentine

• DVD-R discs play only on internal burner/reader of DVD that was used to create the disc?

  Hello

  This is the DVD-R that I created will not play on my Player DVD TV Philips standard or any other DVD player other than the one used to create the floppy disks?  I tried to lower the record speed of Windows DVD Maker, Cyberlink Power Director, and Nero 11 and all have the same issue?  I can only read my disks on HP laptop DVD drive?  The discs I used are:

  Philips DVD - R 4.7 GB 1-16 X
  Memorex DVD - R 4.7 GB 16 X

  My old Windows XP machine has no problems burning these discs and they play back well on Player DVD TV Philips and all players with my friends.

  This problem is driving me crazy! This is a 1 year HP Pavilion dv9000 with built in DVD/Blue Ray recorder. It runs 64-bit Vista Home Premium computer. All Windows updates are made and there are zero viruses and malware.

  Any help would be appreciated!

  Mark

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Read the info above about the correct format to burn in.

  Burn a disc using the ISO image format

  Choose the size of the ISO image when you need a highly compatible disc that will play in computers with an older version of Windows or in devices such as CD and DVD players that can play video files and music digital. For more information about choosing a disc format, see which CD or DVD format should I use?

  See you soon.

  Mick Murphy - Microsoft partner

• Create the database with a set of characters

  Hello
  
  I need to create a database with the character US8PC437 (platform Linux Redhat 5.4 64-bit, database version 11.2.0.3), but this character set do not appear when I create the database with the database assistant (DBCA).
  
  Any help will be apreciated.
  
  
  Best regards
  
  Antonio Serrano
  
  Published by: albrotar on March 6, 2012 09:14

  While AL32UTF8 is certainly recommended for the Oracle database character set, use only, if your application provider has confirmed that their application will work with a set of characters to multibyte database.

  To create a database US8PC437 (it is rarely a choice, in fact) with DBCA 11.2, select the "character sets" tab, once shown, then select the option 'Choose from the list of character sets' and uncheck 'Show recommended only character sets '. This will add US8PC437 to the "Database character set" drop-down list. Select "US8PC437" from the list and continue the process of creation.

  But first, contact your provider and ask a compatible Unicode version of your application.

  -Sergiusz

• Creating the table with time stamp

  I need to create the table with the data inside buffer
  
  Can you help me pls
  
  If it works today,
  
  create the table test_04NOV2010 in select * from product where product_code = '101'
  
  If executed tmrw,
  
  create the table test_05NOV2010 in select * from product where product_code = '101'
  

  declare
  
  v_date varchar2(25);
  v_sql  varchar2(20);
  
  begin
  
  select to_char(sysdate,'DDMONYYYY') into v_date from dual;
  
   v_sql := ' create table ' ||TEST||'_'||'v_date'|| 
               ' as '
               ' select * from Product where product_code = '101'
            
   EXECUTE IMMEDIATE v_sql;
  
  end;

  can is it you pls let me know how to use it in PL SQL
  
  Can you help me pls
  
  Thank you very much

  declare
  
  v_date varchar2(25);
  v_sql  varchar2(2000); --Noted this. this was also small.
  
  begin
  
  select to_char(sysdate,'DDMONYYYY') into v_date from dual;
  
   v_sql := ' create table TEST_'||v_date||
               ' as select * from Product where product_code = ''101''';
  
   EXECUTE IMMEDIATE v_sql;
  
  end;
  

  You can use the Q operator also.

  DECLARE
  
  v_date varchar2(25);
  v_sql  varchar2(2000);
  
  BEGIN
  
  select to_char(sysdate,'DDMONYYYY') into v_date from dual;
  
   v_sql := ' create table TEST_'||v_date||
              Q'[ as select * from Product where product_code = '101']';
  
   EXECUTE IMMEDIATE v_sql;
  
  END;
  

  Published by: mohamed on November 4, 2010 05:32

• How to create the table with the description of the table

  Hello

  I would like to create the array with the description of the table (such as the creation of package or procedure with comments).

  Is it possible to achieve thanks to the oracle, if possible please help me achieve this goal.

  Thank you and best regards,

  Ibrahim Sayyed.

  > create table test (col1 number);

  > comment table test is "about a comment ';

  > select comments from user_tab_comments where table_name = 'TEST ';

  COMMENTS
  ____________________________________________________________________
  This is a comment

• create the table with the parameters of storage in a locally managed tablespace

  Hello
  Can we create object with the parameters of storage in a locally managed tablespace.
  
  CREATE TABLE my_hash_table_6)
  name VARCHAR2 (30),
  value VARCHAR2 (4000))
  STORAGE)
  INITIAL 1 M
  NEXT 512K
  PCTINCREASE 0
  MINEXTENTS 2
  MAXEXTENTS UNLIMITED)
  
  
  default tablespace users is successful locallly.
  Then extended this table management will be managed according to the tablespace or storage settings which
  has been specified when the table was created.

  Hello

  This means that we don't have to define NEXT, PCTINCREASE, MAXEXTENTS at the object level.
  Then, these settings are applicable to Dictionary managed tablespace or what?

  Yes that's right, understand you is correct

  Can we define NEXT, PCTINCREASE, MAXEXTENTS at the level of the object in the dictionary managed tablespace;

  Yes, you can, but go for DMT, is not very good, because you advantages compared to LMT, just think about it before going to the DMT, than I suggest.

  -Pavan Kumar N
  Oracle 9i / 10g - OCP
  http://oracleinternals.blogspot.com/

• Create the table with the environment variables

  Hi all
  When an event occurs, I would create a table by a planning procedure.
  I can create a table with these last or similar syntax:
  
  create table % s_ %t in select acme_ * from a;
  
  I would use this syntax because this event could be spend more time per day and so I can check.
  is this possible?
  
  Thank you very much
  Ciao
  Alberto

  Albertofro wrote:
  Hi all
  When an event occurs, I would create a table by a planning procedure.
  I can create a table with these last or similar syntax:

  create table % s_ %t in select acme_ * from a;

  I would use this syntax because this event could be spend more time per day and so I can check.
  is this possible?

  Thank you very much
  Ciao
  Alberto

  To dynamically create a table, you must use EXECUTE IMMEDIATE. If you want your table to be padded with timestamp name you can do it with the function TO_CHAR and SYSDATE.

  An example

  execute immediate 'create table acme_' || to_char(sysdate, 'DDMMYYYYHH24MISS') || ' as select * from a';
  

• Bug trying to create the link with the Cyrillic characters in URL

  I'm transforming words in my text on the links, but with Cyrillic characters in their URL (such as https://en.wiktionary.org/wiki/ хорошо). The problem is that, depending on how create the link, the page refuses to accept the URL.

  It's my preferred method (which accepts not the Pages):

  1. Write or select the text to be transformed into link;
  2. Press cmd + k;
  3. Paste the URL (https://en.wiktionary.org/wiki/ хорошо) in the field;
  4. Hit enter or click out;
  5. When I check the link, it is www.apple.com.

  The strange is that other methods work very well.

  1 against nature (accepts Pages):

  1. Delete my word;
  2. In its place, paste the URL (https://en.wiktionary.org/wiki/ хорошо);
  3. Hit the space bar (a link is created automatically with the correct URL);
  4. Edit the link that is created and change its text;
  5. When I check the link, he kept correct.

  2 against nature (accepts Pages):

  1. Write or select the text to be transformed into link;
  2. Press cmd + k;
  3. Find a way to build a version with my URL (https://en.wiktionary.org/wiki/%D1%85%D0%BE%D1%80%D0%BE%D1%88%D0%BE) escape sequence;
  4. Paste the URL with escape sequence in link field;
  5. Hit enter or click out;
  6. When I check the link, ironically, is хорошо https://en.wiktionary.org/wiki/.

  To stretch more:

  1. Editing a link created successfully (with any success methods above);
  2. Changed its URL (from хорошо https://en.wiktionary.org/wiki/ to https://en.wiktionary.org/wiki/ плохо)
  3. Hit enter or click out;
  4. When I check the link, it's still хорошо https://en.wiktionary.org/wiki/;
  5. Finally edited and changed its URL still once, now remove the Cyrillic (https://en.wiktionary.org/wiki);
  6. Press enter, click out and he finally accepted the URL.

  Pages seems to be denying the creation of links with the URL that contains Cyrillic characters (only?), but exclusively through his little creation of link popup. I think it's a simple problem, but I'm sure it's very annoying.

  Everyone knows the same?

  Cyrillic characters in the range of table encoding UTF-8 code points u + 0400 - u + 04 FF are represented by two bytes. These people must be encoded as a percentage (read the two paragraphs of the current standard of article), as the Pages v5.6.2 will convert automatically URI to this encoding for you in the link Inspector. It will simply ignore what it considers incorrect URI links, they are Cyrillic, or even English.

  Use what is easier for you, and that Pages v5.6.2 accepts.

• problem of traffic flow with tunnel created the network with a tunnel to a VPN concentrator

  Hi, I worked with Cisco and the seller for 2 weeks on this.II am hoping that what we are witnessing will ring a Bell with someone.

  Some basic information:

  I work at a seller who needs from one site to the other tunnel.  There are currently 1 site to another with the seller using a Juniper SSG, which works without incident in my system.  I'm transitioning to routers Cisco 2811 and put in place a new tunnel with the seller for the 2800 uses a different public ip address in my address range.  So my network has 2 tunnels with the provider that uses a Cisco VPN concentrator.  The hosts behind the tunnel use 20x.x.x.x public IP addresses.

  My Cisco router will create a tunnel, but I can't not to hosts on the network of the provider through the Cisco 2811, but I can't get through the tunnel of Juniper.  The seller sees my packages and provider host meets them and sends them to the tunnel.  They never reach the external interface on my Cisco router.

  I'm from the external interface so that my endpoint and the peers are the same IP address.  (note, I tried to do a static NAT and have an address of tunnel and my different host to the same result.)  Cisco has confirmed that I do have 2 addresses different and this configuration was a success with the creation of another successful tunnels toa different network.)

  I tested this configuration on a network of transit area before moving the router to the production network and my Cisco 2811 has managed to create the tunnel and ping the inside host.  Once we moved the router at camp, we can no longer ping on the host behind the seller tunnel.   The seller assured me that the tunnel setting is exactly the same, and he sees his host to send traffic to the tunnel.  The seller seems well versed with the VPN concentrator and manages connections for many customers successfully.

  The seller has a second VPN concentrator on a separate network and I can connect to this VPN concentrator with success of the Cisco 2811 who is having problems with the hub, which has also a tunnel with Gin.

  Here is what we have done so far:

  (1) confirm the config with the help of Cisco 2811.  The tunnel is up.  SH cyrpto ipa wristwatch tunnel upward.
  (2) turn on Nat - T side of the tunnel VPN landscapers
  (3) confirm that the traffic flows properly a tunnel on another network (which would indicate that the Cisco config is ok)
  (4) successfully, tunnel and reach a different configuration hosting
  (5) to confirm all the settings of tunnel with the seller
  (6) the seller confirmed that his side host has no way and that it points to the default gateway
  (7) to rebuild the tunnel from scratch
  8) confirm with our ISP that no way divert traffic elsewhere.  My gateway lSP sees my directly connected external address.
  (9) confirm that the ACL matches with the seller
  (10) I can't get the Juniper because he is in production and in constant use

  Is there a known issue with the help of a VPN concentrator to connect to 2 tunnels on the same 28 network range?

  Options or ideas are welcome.  I had countless sessions with Cisco webex, but do not have access to the hub of the seller.  I can forward suggestions.

  Here's a code

  crypto ISAKMP policy 1
  BA 3des
  md5 hash
  preshared authentication
  Group 2
  !
  crypto ISAKMP policy 2
  BA 3des
  preshared authentication
  Group 2

  Crypto ipsec transform-set mytrans aes - esp esp-sha-hmac

  Crypto-map dynamic dynmap 30
  Set transform-set RIGHT

  ISAKMP crypto key address No.-xauth

  interface FastEthernet0/0
  Description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FE $ 0/0
  IP 255.255.255.240
  IP access-group 107 to
  IP access-group out 106
  NAT outside IP
  IP virtual-reassembly
  route IP cache flow
  automatic duplex
  automatic speed
  crypto mymap map

  logging of access lists (applied outside to get an idea of what will happen.  No esp traffic happens, he has never hits)

  allowed access list 106 esp host host newspaper
  106 ip access list allow a whole
  allowed access list 107 esp host host Journal
  access-list 107 permit ip host host Journal

  access-list 107 permit ip host host Journal
  107 ip access list allow a whole

  Crypto isa HS her
  IPv4 Crypto ISAKMP Security Association
  status of DST CBC State conn-id slot
    QM_IDLE ASSETS 0 1010

  "Mymap" ipsec-isakmp crypto map 1
  Peer =.
  Extend the 116 IP access list
  access - list 116 permit ip host host (which is a public IP address))
  Current counterpart:
  Life safety association: 4608000 kilobytes / 2800 seconds
  PFS (Y/N): N
  Transform sets = {}
  myTrans,
  }

  OK - so I have messed around the lab for 20 minutes and came up with the below (ip are IP test:-)

  (4) ip nat pool crypto-nat 10.1.1.1 10.1.1.1 prefix length 30 <> it comes to the new address of NAT

  !
  (1) ip nat inside source list 102 interface FastEthernet0/0 overload <> it comes to the interface by default NAT

  !
  IP nat inside source map route overload of crypto-nat of crypto-nat pool <> it is the policy of the NAT function

  !

  (6) access-list 101 permit ip 172.16.1.0 0.0.0.255 172.16.2.0 0.0.0.255 <> defines the IP source and destination traffic

  !

  (2) access-list 102 deny ip 172.16.1.0 0.0.0.255 172.16.2.0 0.0.0.255 <> does not NAT the normal communication

  (3) access-list 102 deny ip 10.1.1.1 host 172.16.2.0 0.0.0.255 <> does not re - NAT NAT

  (1) access-list 102 permit ip 172.16.1.0 0.0.0.255 any <> allows everyone else to use the IP Address of the interface for NAT

  !

  (5) crypto-nat route-map permit 5 <> condition for the specific required NAT
  corresponds to the IP 101 <> game of traffic source and destination IP must be NAT'td

  (7) access list 103 permit ip 10.1.1.1 host 172.16.2.0 0.0.0.255 <> crypto acl

  Then, how the works above, when a package with the what IP 172.16.1.0/24 source wants to leave the router to connect to google, say the source will change to IP interface (1).  When 172.16.1.0/24 wants to talk to172.16.2.0/24, it does not get translated (2).  When the remote end traffic equaled the following clause of NAT - the already NAT'td IP will not be affected again (3) when a host 172.16.1.0/24 wants to communicate with 172.16.2.20/24 we need a NAT NAT specific pool is required (4).  We must define a method of specific traffic to apply the NAT with a roadmap (5) which applies only when the specific traffic (6), then simply define the interesting traffic to the VPN to initiate and enable comms (7) corresponding

• Create the user with privileges only data entry.

  Hello guys,.

  A very basic question. I created the request of APEX, well obviously the user with whom I created this application has developer access, now I want to create a user who is able to see the developed application, I tried to find the user options, but could not.  Someone can help me to find the option, I need to follow, so that the newly created user is only able to enter data into forms and run reports and should not be able to make changes in the application developed.

  Concerning

  Faisal Niazi says:

  A very basic question. I created the request of APEX, well obviously the user with whom I created this application has developer access, now I want to create a user who is able to see the developed application, I tried to find the user options, but could not.  Someone can help me to find the option, I need to follow, so that the newly created user is only able to enter data into forms and run reports and should not be able to make changes in the application developed.

  Create 'end users' by selecting No for the user is an administrator of the workspace and the user is a developer account privilege options create new user accounts. These users connect to the APEX Application Builder. It can be given direct access to a request by specifying the ID of the application or alias to the URL:

  apex.oracle.com/pls/apex/f?p=

  or

  apex.oracle.com/pls/apex/f?p=

  Using an alias for the application is recommended.

  To restrict user access to pages, components and specific applications, create authorisation schemes and the apply to the application level.

• XLS-models with BI Publisher using and download the reports with APEX

  Hello

  I already create PDF reports with RTF Templates. In the APEX, I create a button and a process of "Download" to get the PDF-reports the BI Publisher. ". We use version 11.1.7.

  Now I try the same thing with XLS-Templates. I create the XLS model in the editor of BI and where it works very well. Now I need also an APEX-"Download" - Process to download the XLS reports to the client. The method already used doesn't work for RTF models.

  Kind regards

  Mark

  Hello

  I found here, the format has value "excel", not "xls"!

  http://docs.Oracle.com/CD/E28280_01/doc.1111/e26693/ibr_config.htm#WCCAA2062

  Now it works like a charm!

  Kind regards

  Mark

• create the database with Oracle Client link

  Hello together,

  on my machine Windows 7 with Oracle Client installed 12.0.1.0, I'm trying to create a database link to a database server, which runs on Oracle Standard Edition1 11.2.0.2.

  When I connect to sqlplus on the client with "sqlplus/nolog" and type the command:

  SQL > create SID of the database link

  connect to the user identified by passwd

  using "tnsnames.ora connection."

  I have a SP2-0640: not connected. OK, it is clear, because I use sqlplus with option/nolog. But client-side normally I have no database, where I can connect. So I think, there is no user, or?

  The database to which I want to connect is located in tnsnames.ora.

  Generally: Is it possible to use the Oracle Client to create a database link? Maybe there's another way to do this?

  A big thank you and best regards,

  David

  You don't seem to understand the concept of a database link.

  A database link connects two databases. Not a client and a database.

  You need to link up in a data source to a target database.

  The only thing you need is a client of sqlplus in sqlplus client, you need to connect to the source database.

  If you can't connect to the source database, you must present the statement to someone.

  Sybrand Bakker

  Senior Oracle DBA