To create the GUI with Adobe CC but which package is better to use?

Similar Questions

• Hello, if I created a website with adobe muse, I can't create member area. but this is what I can export the site created in wordpress pour it?

  Hello, if I created a website with adobe muse, I can't create member area. but this is what I can export the site created in wordpress pour it?

  If you want a WP site, using Wordpress and see their API and guides for creating themes and customizations. This has absolutely nothing to do with the Muse. You simply cannot just create a site of Muse and hope that it will work with WP.

  Mylenium

• Hello! so I create a character with long hair, but the thing is it attached on the face and body, cannot move/dangle by itself. and the eyebrows can not move

  Hello! so I create a character with long hair, but the thing is it attached on the face and body, cannot move/dangle by itself. and the eyebrows can not move

  For groups or layers Warp independently of their parent group, add a "+" to the beginning of the name of the layer in PS / HAVE. It's the same select group in the Panel of puppets and by checking the Warp option independently in the properties panel.

  Once a group is warping independently, it will be attached to its origin at the origin of the group from its parent by default. You can join a different handful in the parent using the fix to the popup in the properties panel. In Preview 3, if you want to move the origin, you need to do in PS / HAVE. In future releases, you will be able to change the origin directly in the Panel of the puppet.

  If this doesn't solve your problem, you can post a screenshot of the hierarchy of layer here, to see if there is another structural problem.

• I am trying to create a slideshow with Adobe Photoshop 12.  After a few episodes to work on it, some of the slide pictures disappear.  Very frustrating.  Why?  I'm to access photos from the catalogue and folders on my computer.  E

  I am trying to create a slideshow with Adobe Photoshop 12.  After a few episodes to work on it, some of the slide pictures disappear.  Very frustrating.  Why?  I'm to access photos from the catalogue and folders on my computer.  Disappearances seem random.

  Elements Photoshop Elements

• I need to transfer a license for Acrobat Pro XI from one PC to another, but I lost my original disks. I register the product with Adobe but it doe not appear on my identification code Adobe how can I find my product to install it on another PC

  I need to transfer a license for Acrobat Pro XI from one PC to another, but I lost my original disks. I register the product with Adobe but it doe not appear on my identification code Adobe how can I find my product to install it on another PC?

  Hello

  If you have the serial number of Adobe Acrobat pro 11.

  Download the program and activate it using the serial number.

  Download link:- download Acrobat products | Standard, Pro | DC, XI, X

• Hi, I have a problem with a basic movement scroll effect.  I've already looked and read every tutorial out there about it and even tried the cat to adobe support, but the guy at the other end of the line disconnected me..., he probably didn't unde

  Hi, I have a problem with a basic movement scroll effect.

  I've already looked and read every tutorial out there about it and even tried the cat to adobe support, but the guy at the other end of the line disconnected me..., probably he did not understand what I wanted him, because English is not my native language, so one will try to be very clear on this one...

  Please note that I am new to dream, this is my first project ever.

  My idea is as follows:

  When the customer comes to our site of companies, he sees just our logo on a white background. the logo is composed of, say, four elements. When the client makes a scrolling down, the logo begins to transport: first the first part of the logo flies on the left side of the site, then the second part of the logo disappears down, then the third part of the logo flies to the right, then the fourth part of the logo flies upward and out of sight of customers. given what I've seen, it is possible to do...

  so...

  now I have four parts of my logo imported as png files in muse and was assembled in design mode to build our companies logo. I select each of the four parts and go to the effects of scrolling to the left tab next to the tab layers first I get the same values for each of the four parts: first movement: x 0 and x 0 again for the movement of the left and right; key position (t-handle): 0px; final movement: x 0 and x 0 for the value of left and right.

  now, I hit "Preview". : the logo is "pinned" to the correct location, I can scroll but the logo stays where it is. So far so good...

  now, I select all four components again and go to the tab scroll to 'final motion' effecs, I click on the drop down arrow and enter 1 x. I struck an excerpt...

  When I scroll the WHOLE grave logo down... well.

  NOW, I want the first part of the logo down, THEN part II to move left, THEN the third part to go to the top, THEN the fourth part to go right.

  so I select ONLY the first part, go to the request of scroll, to the 'final movement' tab, I click on the left arrow, then I go 1 x. (the value of up-down, I put to 0 again)... I struck an excerpt...

  the first part of the logo is left as soon as I start to scroll, the other three parties still go down at the same time...

  NOW, I want the second part of the logo to start to move, when the first part left, not at the same time as the first part.

  THEN I SELECT THE SECOND PART AND DRAG ITS HANDLE IN T (KEY ITEM) DOWN, LETS SAY: 200PX. THEN IT STARTS TO MOVE ONLY AFTER THE CUSTOMER HAS REACHED THIS POINT, RIGHT?

  BUT WHEN I SAW THAT *, THE LOGO IS NO LONGER TOGETHER, THE SECOND PART IS FLOATING ANYWHERE, BUT WHERE IT SHOULD BE... WTFF?

  short: when I move the t-handle, the initial position of the object changes. That's what I said to the adobe employee, but he said, this is the expected behavior...

  But if that's the case, how can I have my four parts correctly together, so they form my logo, but with different t treats, so they all start to move at different times?

  Pleeease help me, I will die of frustration here...: () this behavior is not normal, right?

  Thank you very much to everyone who reads this message and tries to help him...

  All the best,

  Niki Lapan

  I'm not good at explaining things that im going to download the file, I did for you. hope this helps you solve your problem

  https://www.mediafire.com/?xiild0yhr5cna7s

• create a form with Adobe Acrobat Standard XI: problem - interactive objects

  try to create a form with Adobe Acrobat Standard XI: problem - interactive objects-> activate: hide the form text field-> work-> first it s didn t hide but if you continue to fulfill other things it shows the field hide; What wrong? answer also in German as possible Thx Sascha

  In the boxes use the "Mouse Up" with the action "run a JavaScript.

  Example for the "Ergebnisvergleich", you can use JavaScript the suite:

  field var = this.getField ("Verdeckung Ergebnisvergleich");

  If (event.target.isBoxChecked (0)) {}

  Field.Display = display.hidden;

  } else {}

  Field.Display = display.visible;

  }

• problem of traffic flow with tunnel created the network with a tunnel to a VPN concentrator

  Hi, I worked with Cisco and the seller for 2 weeks on this.II am hoping that what we are witnessing will ring a Bell with someone.

  Some basic information:

  I work at a seller who needs from one site to the other tunnel.  There are currently 1 site to another with the seller using a Juniper SSG, which works without incident in my system.  I'm transitioning to routers Cisco 2811 and put in place a new tunnel with the seller for the 2800 uses a different public ip address in my address range.  So my network has 2 tunnels with the provider that uses a Cisco VPN concentrator.  The hosts behind the tunnel use 20x.x.x.x public IP addresses.

  My Cisco router will create a tunnel, but I can't not to hosts on the network of the provider through the Cisco 2811, but I can't get through the tunnel of Juniper.  The seller sees my packages and provider host meets them and sends them to the tunnel.  They never reach the external interface on my Cisco router.

  I'm from the external interface so that my endpoint and the peers are the same IP address.  (note, I tried to do a static NAT and have an address of tunnel and my different host to the same result.)  Cisco has confirmed that I do have 2 addresses different and this configuration was a success with the creation of another successful tunnels toa different network.)

  I tested this configuration on a network of transit area before moving the router to the production network and my Cisco 2811 has managed to create the tunnel and ping the inside host.  Once we moved the router at camp, we can no longer ping on the host behind the seller tunnel.   The seller assured me that the tunnel setting is exactly the same, and he sees his host to send traffic to the tunnel.  The seller seems well versed with the VPN concentrator and manages connections for many customers successfully.

  The seller has a second VPN concentrator on a separate network and I can connect to this VPN concentrator with success of the Cisco 2811 who is having problems with the hub, which has also a tunnel with Gin.

  Here is what we have done so far:

  (1) confirm the config with the help of Cisco 2811.  The tunnel is up.  SH cyrpto ipa wristwatch tunnel upward.
  (2) turn on Nat - T side of the tunnel VPN landscapers
  (3) confirm that the traffic flows properly a tunnel on another network (which would indicate that the Cisco config is ok)
  (4) successfully, tunnel and reach a different configuration hosting
  (5) to confirm all the settings of tunnel with the seller
  (6) the seller confirmed that his side host has no way and that it points to the default gateway
  (7) to rebuild the tunnel from scratch
  8) confirm with our ISP that no way divert traffic elsewhere.  My gateway lSP sees my directly connected external address.
  (9) confirm that the ACL matches with the seller
  (10) I can't get the Juniper because he is in production and in constant use

  Is there a known issue with the help of a VPN concentrator to connect to 2 tunnels on the same 28 network range?

  Options or ideas are welcome.  I had countless sessions with Cisco webex, but do not have access to the hub of the seller.  I can forward suggestions.

  Here's a code

  crypto ISAKMP policy 1
  BA 3des
  md5 hash
  preshared authentication
  Group 2
  !
  crypto ISAKMP policy 2
  BA 3des
  preshared authentication
  Group 2

  Crypto ipsec transform-set mytrans aes - esp esp-sha-hmac

  Crypto-map dynamic dynmap 30
  Set transform-set RIGHT

  ISAKMP crypto key address No.-xauth

  interface FastEthernet0/0
  Description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FE $ 0/0
  IP 255.255.255.240
  IP access-group 107 to
  IP access-group out 106
  NAT outside IP
  IP virtual-reassembly
  route IP cache flow
  automatic duplex
  automatic speed
  crypto mymap map

  logging of access lists (applied outside to get an idea of what will happen.  No esp traffic happens, he has never hits)

  allowed access list 106 esp host host newspaper
  106 ip access list allow a whole
  allowed access list 107 esp host host Journal
  access-list 107 permit ip host host Journal

  access-list 107 permit ip host host Journal
  107 ip access list allow a whole

  Crypto isa HS her
  IPv4 Crypto ISAKMP Security Association
  status of DST CBC State conn-id slot
    QM_IDLE ASSETS 0 1010

  "Mymap" ipsec-isakmp crypto map 1
  Peer =.
  Extend the 116 IP access list
  access - list 116 permit ip host host (which is a public IP address))
  Current counterpart:
  Life safety association: 4608000 kilobytes / 2800 seconds
  PFS (Y/N): N
  Transform sets = {}
  myTrans,
  }

  OK - so I have messed around the lab for 20 minutes and came up with the below (ip are IP test:-)

  (4) ip nat pool crypto-nat 10.1.1.1 10.1.1.1 prefix length 30 <> it comes to the new address of NAT

  !
  (1) ip nat inside source list 102 interface FastEthernet0/0 overload <> it comes to the interface by default NAT

  !
  IP nat inside source map route overload of crypto-nat of crypto-nat pool <> it is the policy of the NAT function

  !

  (6) access-list 101 permit ip 172.16.1.0 0.0.0.255 172.16.2.0 0.0.0.255 <> defines the IP source and destination traffic

  !

  (2) access-list 102 deny ip 172.16.1.0 0.0.0.255 172.16.2.0 0.0.0.255 <> does not NAT the normal communication

  (3) access-list 102 deny ip 10.1.1.1 host 172.16.2.0 0.0.0.255 <> does not re - NAT NAT

  (1) access-list 102 permit ip 172.16.1.0 0.0.0.255 any <> allows everyone else to use the IP Address of the interface for NAT

  !

  (5) crypto-nat route-map permit 5 <> condition for the specific required NAT
  corresponds to the IP 101 <> game of traffic source and destination IP must be NAT'td

  (7) access list 103 permit ip 10.1.1.1 host 172.16.2.0 0.0.0.255 <> crypto acl

  Then, how the works above, when a package with the what IP 172.16.1.0/24 source wants to leave the router to connect to google, say the source will change to IP interface (1).  When 172.16.1.0/24 wants to talk to172.16.2.0/24, it does not get translated (2).  When the remote end traffic equaled the following clause of NAT - the already NAT'td IP will not be affected again (3) when a host 172.16.1.0/24 wants to communicate with 172.16.2.20/24 we need a NAT NAT specific pool is required (4).  We must define a method of specific traffic to apply the NAT with a roadmap (5) which applies only when the specific traffic (6), then simply define the interesting traffic to the VPN to initiate and enable comms (7) corresponding

• I have problems with creative cloud.  5 times now, I was in the chat with Adobe and they say the problem is solved and so far it has either not been corrected or there 1 night and then I get this message again

  So to continue with my problem.  I could not open CC, or if I sound only for 1 day, then I get this problem again...

  Adobe Creative Cloud is necessary to solve this problem. However, it is missing or damaged.  Please download and install a new copy of the creative from cloud

  ' http://www.Adobe.com/go/adobecreativecloudapp '.

  I was in the chat with Adobe 5 times now for hours in a row and had to re download my times apps and use my data allowance and I'm sick of it! After every time Adobe says: the problem is corrected and I will have no more problems, and that's not true.  The last time I was in the chat was last night and it reassures me, the problem has been solved once more and it worked today and tonight it's the same thing.  I am a student online and am so far behind that I have not been able to use my apps, Illustrator and Indesign as CC keeps having this problem.  I am very frustrated and I don't know what to do. If I go again being discussed, I know they will do the same thing and I am not convinced that they will never fix this problem.  They assure me this is not my computor but it is a corrupt file or something on it.  I pay a monthly subscription for the products that I can't even use

  Please, try the following steps:

  • Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Reboot the computer.
  • Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

• I bought the upgrade of Adobe DC, but I don't have the serial number of the previous versions. What are my options?

  I bought the upgrade of Adobe DC, but I don't have the serial number of the previous versions. What are my options?

  Note that if you fully and properly recorded your earlier version of Acrobat from Adobe, you can retrieve the serial number on the Adobe site by logging in with your Adobe ID

  In addition, be aware that reduced to Acrobat CC upgrades apply only to users of Acrobat 10 and 11. Earlier versions of Acrobat are not eligible for reduced upgrade prices.

  -Dov

• Create the database with a set of characters

  Hello
  
  I need to create a database with the character US8PC437 (platform Linux Redhat 5.4 64-bit, database version 11.2.0.3), but this character set do not appear when I create the database with the database assistant (DBCA).
  
  Any help will be apreciated.
  
  
  Best regards
  
  Antonio Serrano
  
  Published by: albrotar on March 6, 2012 09:14

  While AL32UTF8 is certainly recommended for the Oracle database character set, use only, if your application provider has confirmed that their application will work with a set of characters to multibyte database.

  To create a database US8PC437 (it is rarely a choice, in fact) with DBCA 11.2, select the "character sets" tab, once shown, then select the option 'Choose from the list of character sets' and uncheck 'Show recommended only character sets '. This will add US8PC437 to the "Database character set" drop-down list. Select "US8PC437" from the list and continue the process of creation.

  But first, contact your provider and ask a compatible Unicode version of your application.

  -Sergiusz

• I bought a computer that has been renovated and the owner said that he has updated the computer with Windows 7, but the computer is now ask for an activation code.

  I need help to activate my computer but I don't have the code. I bought a computer that has been renovated and the owner said that he has updated the computer with Windows 7, but the computer is now ask for an activation code. I tried to contact the guy but he won't answer. Is it possible to check the activation without the code? I need help and do not want to pay a hundred dollars more.

  Is there a COA sticker that is attached to the machine?

  If so, check to see what edition and version of Windows machine is licensed to:

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  Also:

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• I bought the DC license adobe Acrobat but I'm unable to edit PDF files. Whenever I try to edit a file, it shows me the payment option.

  I bought the DC license adobe Acrobat but I'm unable to edit PDF files. Whenever I try to edit a file, it shows me the payment option.

  Install and use Adobe Acrobat. Do not use Acrobat Reader.

• I can't open the PDF with Adobe Reader XI... get an error that "Adobe has stopped working" then it closes.  Any suggestions?

  I can't open the PDF with Adobe Reader XI... get an error that "Adobe has stopped working" then it closes.  Is it a question of Adobe, Microsoft problem or security issue?

  Since you talk about Microsoft, I guess you're on Windows.

  Can you open Reader by itself?  If so, try to disable the Protected Mode [Edit |] Preferences | (Improved) security].

• How to create the table with the description of the table

  Hello

  I would like to create the array with the description of the table (such as the creation of package or procedure with comments).

  Is it possible to achieve thanks to the oracle, if possible please help me achieve this goal.

  Thank you and best regards,

  Ibrahim Sayyed.

  > create table test (col1 number);

  > comment table test is "about a comment ';

  > select comments from user_tab_comments where table_name = 'TEST ';

  COMMENTS
  ____________________________________________________________________
  This is a comment