sys is port vpccw13fx HDMI does not try to update drivers... .cant find compettible drivers...

Similar Questions

• 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

  Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

  In addition, the HID-Compliant touch screen driver is missing.

  Please help me solve this problem, thank you.

  Hi there @BryanHech,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

  How you did update the drivers?

  You use Windows Update?

  Have you checked to see if the driver has been disabled?

  Have you tried to run the Troubleshooter in Windows?

  Have you tried to do a hard reset?

  Have you tried a update the BIOS and graphics driver?

  Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

  Have you tried to Configure the display key?

  Have you tried to activate the driver in touch screen device manager?

  Please follow these steps to see if you can activate the touch screen:

  • Open the Device Manager
  • Find "Human Interface Devices"
  • Expand "Human Interface Devices"
  • Right-click on "touch screen HD compliant."
  • Click 'Activate' (if available)
  • Restart your laptop.

  If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Choose a restore point
  • Click Next
  • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• Graphics ATI catalyst on Acer aspire timeline 3820 tg - does not work on windows 8 (HDMI does not work)

  I have trouble with my ATI catalyst on win 8 HDMI does not work, and I am not able to download/find the right driver

  The Aspire 3820TG don't figure on our page Windows 8 Upgrade offer.

  Therefore, we do not provide drivers of Windows 8 for this system.

  You can try to find the drivers of Windows 8 on AMD Support site.

  http://support.AMD.com/us/pages/AMDSupportHub.aspx

• Toshiba TL939 - HDMI does not work

  Hello world.

  My name is Matthew, I am a beginner.

  I just bought new TV; Toshiba TL939.
  The problem is that after restarting the default TV system, HDMI does not work.

  Connect me my TV cable HDMI with Satellite NC +.
  It's decoder signals. Yesterday, everything works fine.

  Today - this.
  My mother pushed something in the remote control, then back to the factory settings, you know... Mothers ^^

  Please help me.

  What do you exactly by THAT HDMI does not work?
  Have you chosen the right HDMI channel where your satellite receiver is plugged?

  Please read the user manual:
  http://www.Toshiba-OM.NET/LCD/PDF/English/TL939-4046-English.PDF

  Select the right external input source.
  (page 7)-> button 2

• HDMI does not work after upgrade to Windows 10

  HI. My HDMI does not work with Windows 10.

  Hi, did you have hopefully solve this; I have the same problem?

• My MOMENTUM PS/2 port touchpad touchpad does not work correctly.

  I'm using acer aspire laptop v3. My MOMENTUM PS/2 port touchpad touchpad does not work correctly. It stops working sometimes and automatically return to the action after a while. When he stops working, pointer can be moved but just click, left click, scroll etc. do not work... Help, please...

  Hi Anoop,

  This problem may occur because of incompatible or corrupted touchpad drivers. I suggest you to uninstall and reinstall the drivers and see if it helps.

  To uninstall the device drivers, follow these steps:

  a. drag the mouse down to the left and right click on the Start icon.

  b. Select Device Manager.

  c. right-click on the device driver, and then click Uninstall.

  Check out the link to install the drivers:

  http://www.Acer.co.in/AC/en/in/content/drivers

  It will be useful. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• WinXP Pro 2008 does not recognize my computer drivers & load the standard drivers 2001

  WinXP Pro 2008 does not recognize my computer drivers & load the drivers of standard system of 2001; Impossible to upgrade

  then load systemroot, I don't want systemroot, also charges 3.1 drivers, 95, 98. 2000 & winnt 3, 4, 5 &

  Sometimes it runs under DOS only & sometimes not

  I don't want to network & sharing, because there's someone attached to my system & load malware {pirate just deleted} & takes control so I'm at work & then interupts me online with flash & js causing anomalies onscreen, resumes also connection & homepage.

  Now my Norton is denied access (& other programs) & I can't use it

  Suffered disc & reworked several times, I tried the sharding & partitioning is not on all COMPUTERS

  This pirate has done this for 12 years, 7 computers & 5 operating systems.

  SOMETIMES HE TAKES CONTROL OF MOUSE & KEYBORD. YOU SHOULD SEE MY CDROM CONTROL CD ABNORMALLY.

  This is clearly abuse & I am at my wits end! Help me get rid of this danger, please

  but hidden.
  Try this, go to disk management (Control Panel, administrative tools, computer management).
  They appear here? If so, you may need to reassign a drive letter for them.

  If not, look in Device Manager, they appear in red/yellow or is there any "unknown devices"?

  Windows cannot have the drivers either, so you can download the drivers from the manufacturers Web site.

  1. start the computer.
  2. press F8 repeatedly to display the start menu.
  3. Select safe mode in the start menu.
  4. right - click on "my computer".
  5. Select Properties.
  6 select the Hardware tab.
  7. click on the button "Device Manager."
  8. click on the (+) plus sign next to CD/DVD players.
  9. right click on each component and select uninstall
  10. follow steps 9 to all components under this category.
  11. restart the computer.

  It must reload the drivers for the CD/DVD drive.
  or

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00619385&LC=en&cc=us

  check on this site how to connect dvd cd players

  I tried the following to help resolve the problem:
  1 attached Mouse, provided power but does not recognize the device. Assistant add hardware does not yet come upward.
  2. 3 readers USB flash, in every port and they were not recognized or attached.
  3 uninstall all devices of USB root hub and rebooted. No change.
  4 uninstalled all the USB controllers and restarted. No change.
  5 install a logitech mouse driver that is the same as the mouse installed. The mouse has not always recognized.
  6 re-flashed the BIOS. No change
  7. utility of diagnosis of Dell Ran and no problem found with the controllers or the USB ports

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  This may be caused by the Tab Mix Plus extension

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to install the latest Dev version of Tab Mix more if you use this extension.

  See the sticky on the forum of Tab Mix Plus:

  • http://tmp.garyr.NET/forum/viewforum.php?f=3
  • http://tmp.garyr.NET/forum/viewtopic.php?f=3 & t = 15740

• I tried to run the IE8 downloaded from Microsoft and I got this message: "the version of IE you have installed does not match the update you are trying to install." error no. KB2618444

  I just got my SP3 for my XP machine, I tried to start the download of Microsoft ie8 and I got this message:

  "The version of IE you have installed does not match the update you are trying to install." error no. KB2618444

  I'd appreciate any help that I couldn't solve this problem!

  Thank you!

  E-mail address is removed from the privacy *.

  Original title: error KB2618444setup

  I do not understand your question. Download IE8? Do you mean the installer for IE8? It's here.

  You try to install KB2618444? They make 3. For IE6, IE7, and IE8. You probably download one from a different version of Internet Explorer you have...
  I'm going to guess you really want that for IE8.
  That's it: IE8-WindowsXP-KB2618444 - x 86 - ENU.exe

• MP3 player does not appear. Where can I find?

  I have music in my Media Player I want to download to an MP3 player. I plug it, and nothing happens. My computer does not recognize that something new is here. I can't find it when I search. Help!

  Hello

  1. What is the brand and model of your computer and the MP3 player?

  2 did you change on your computer before this problem?

  3. MP3 player recognized in the Device Manager?

  Open the Device Manager

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-sound/MP3-player-does-not-show-up-where-do-i-find-it/a9b93480-01F6-45c9-8fc9-09c44def623b

  Run the fix of the article and see if it helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  You can also connect the MP3 player to a different USB Port and see if it works.

  You can also connect MP3 player on another computer and see if it helps.

• Windows Update does not check for updates

  my windows update does not check for updates, and tells me it cannot check it trys but has not worked for almost a year now!

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Gyro does not work after update 6 Android on z3 D6633 double

  Gyro does not work after update of the marshmallow on Xperia Z3duos D6633

  Issue edited by Rickard

  @dipuvellara

  Could you try to restart in safe mode and test again?

• 8 window does not accept windows updates!

  I recently downloaded windows 8 and does not receive windows updates.  This does not prevent my installation things like itunes!  I've tried everything I can think of, but nothing seems to work.  Anyone know why?  I disabled the firewall, I tried windows update diagnosis, research on windows update for updates and does not display anything, I tried virus checking.  I am at a loss and is about to throw the computer and get a woman in the place!

  Hello

  Thanks for posting your question on the Microsoft Community.

  As you've already tried several troubleshooting steps, I suggest that you try to reset the Windows Update components. This clears the cache to update and will allow windows to check for each update is available on our server. If an update is found is not installed, which will appear under available updates.

  I suggest that you follow the steps below and try to reset the Windows Update components:

  1. Press Windows + X key.
  2. Click on (Admin) command prompt.
  3. Disable Windows Update services. Type the following commands and press on enter after each line
     1. net stop bits
     2. net stop wuauserv
     3. net stop appidsvc
     4. net stop cryptsvc
  4. Reset update components. Copy the following text and paste the same in the command line window.
     1. Ren %systemroot%\SoftwareDistribution SoftwareDistribution.bak
     2. Ren %systemroot%\system32\catroot2 catroot2.bak
  5. (Note: shortcut keys do not work in the Windows command prompt, please use right click to paste these codes.)
  6. Restart the Services. Type the following commands and press on enter after each line:
     1. net start bits
     2. net start wuauserv
     3. net start appidsvc
     4. net start cryptsvc

  Try to check the updates now, let us know if you encounter error messages.

  Hope this information is useful. Just reply with the results and if you need help or have any other questions about Windows, we're here to help.

• Overview of the LR5 does not. Just updated iMac 2010 with ssd, 32 GB of ram and El captain and all imports new previews are gray. The images are there, can work on them and then they appear in the preview. All records older still work fine just new downlo

  Overview of the LR5 does not. Just updated iMac 2010 with ssd, 32 GB of ram and El captain and all imports new previews are gray. The images are there, can work on them and then they appear in the preview. All records older still work fine just new download does not work. Help, please!

  Please try and delete preview Cache.

  It is located in the same folder as the catalog in Lightroom. The name of the cache an extract ends with Previews.LRDATA and should be deleted. Not to be confused with *. LRCAT, which should not be deleted

  Default location should folder of the image.

  Kind regards

  ~ Mohit