System Configuration utility to troubleshoot advanced configuration in Windows 7 errors

Similar Questions

• Screw system configuration return a code error-2147220608 in LV2013 but not in LV2012 on my system sbRIO

  I worked to deploy a minor correction to an existing system that has worked. Part of this upgrade was to move to LV2013. The configuration of the system live that I used successfully in LV2012 to change the comment and the host name of the error code return now target sbRIO-2147220608 in 2013 when I try to save the changes. By looking at the detailed of the Save Changes (System) .vi result output, I get the message "the IP address and the gateway must be on the same subnet." The problem is twice 1) I'm not change the IP address or gateway on the system and 2) IP address and the gateway are preconfigured by MAX OR 10.0.1.155 and 10.0.0.3 with a subnet mask of 255.255.0.0. Based on my understanding and conversations with my COMPUTER service is a valid combination.

  Help?

  Warrior of wire

  Hello

  R & D work on implementing a fix for this bug. In the meantime, here is a workaround:

  

  If you write the correct IP address and write the host name and the comment, then your backup will be successful. We realize that this is not a very pretty or intuitive solution, but it should work until a fix is implemented.

• status of landmark HP + generic host process for the + serious mistake WMI + system configuration utility + ALG pop-up messages

  I have a desktop computer, with Windows XP. He has a very good performance for 4 years. But in recent days, some of the messages appeared, and suddenly, the computer restarts. and if she did ' t restart directly, she performed very bad (gel + slowly). 6 messages appeared, they are:

  1 - generic host process for win32 services has encountered a problem
  2 - problem WMI
  3 - the system has recovered from a serious error
  4 system configuration utility
  Situation 5 - hp cue has encountered a problem
  6-application Layer Gateway service
  Help, please.

  Hi Alaa' Kabbani,.

  1. did you of recent changes made to your computer?

  2. which antivirus app do you use?

  3. What is the brand and model of your computer?

  I suggest to follow the steps below and we update on the State of the question.

  Method 1: Disconnect any new hardware

  If you have recently installed a new hardware device, the necessary driver so that the material can not be installed or the driver may be damaged or incompatible. To determine if this is true, follow these steps:

  1 unplug the appliance.

  2. restart Windows XP.

  If Windows XP starts successfully, there is a driver problem with the new material. Contact the manufacturer of the device for drivers updated to the device or to learn more about known hardware issues, so that you can reinstall the device.

  For information about how to contact the manufacturer of the device, refer to the Microsoft Web site at the following address:

  http://support.Microsoft.com/GP/vendors

  (http://support.microsoft.com/gp/vendors)

  Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  If this method resolved the issue, you are finished. If this method does not work for you, go to method 3.

  Method 2: Disable automatic reboot in case of system failure

  If the system reboots continuously, do the following:

  1. reboot the computer.

  2. as the computer restarts, press the F8 key repeatedly until you see the Windows Advanced Options screen.

  3. use the arrow keys to select disable automatic system error rebootand press ENTER.

  4. If you receive an error message, follow these steps to search the Microsoft Knowledge Base for useful information about the error message:

  a. copy the text of the error message.

  b. visit the following Microsoft Web site:

  http://support.Microsoft.com

  (http://support.microsoft.com)

  c. type the text of the error message in the Search box, and then type the name of the product you are using, for example "Windows XP".

  d. click on Searchand try to find an article that will help you solve your problem.

  If this method worked, you have resolved the problem of your computer restarts continuously. However, you can continue to troubleshoot driver problems. See the "Symptoms" section again and determine which method to use to solve the problem.

  If this method worked, you are finished. If this method does not work for you, please try Method 3.

  Method 3: Use the known last good Configuration feature

  If you can start the computer successfully, you can use the known last good Configuration feature. This feature uses information that was saved the last time that you shut down the computer before the problems started. This feature allows to restore your registry settings and drivers to the previous information.

  If you are not completely sure what that means, don't worry. None of these reviews will damage your computer. However, you should be aware that if you do this, any changes made to your computer after the date of last known good configuration will be lost.

  If you have recently installed a driver and know a configuration problem, this method will probably work for you. Unfortunately, this feature does not solve the problems caused by missing drivers or corrupt or files.

  To use the last good known Configuration, follow these steps:

  a. restart the computer.

  (b) that the computer restarts, press the F8 key repeatedly until you see the Windows Advanced Options screen.

  c. use the arrow keys to select last good Configuration known (your most recent settings that worked), and then press ENTER.

  d. If you are prompted to select an operating system, use the arrow keys to select the operating system and press ENTER.

  If this method worked, your computer is restored to a good working state. You still have to investigate on what caused this problem. To do this, please see the "Next steps" section for troubleshooting resources more.

  Also refer to this link: Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=G1iW6Kb0x5J

  WARNING CHKDSK:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Anti Virus WARNING: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If you have trouble following the suggested steps or if the problem persists, please let us know and we are ready to answer them for you.

• Change 'Start Up' of the elements in the System Configuration utility

  I tried to remove some the startup items in order to speed up my computer. When I run msconfig and I select "Start" and then check the items to delete, after I selected "Apply" I get a message that basically said... "Access error was returned. You may need to log on as an Adminitrator s changes. As far as I know, I am an administrator as ever, I added all the extra accounts and I always connect under the default account titled original HP administrator.

  In addition, what are the elements are indeed necessary on this menu? Some of them I know but there is a number, I have no idea.

  MSConfig has been designed to be a troubleshooting tool, not a "Start Configurator".  Use MSConfig to determine the location of the command who tries to start the program, and then remove it.  To stop the selective startup notifications, either return your settings to the way they were, or permanently remove unwanted programs from your startup configuration.

  In most cases, with 'good manners' applications, it is usually as simple as opening the unwanted program and deselect the "Show icon in the system tray" option or "launch at Windows startup.

  In addition, look in C:\Documents and Settings\All Users\Menu Menu\Programs\Start Up and C:\Documents and Settings\nom_utilisateur\Menu Menu\Programs\Start files and in the system registry, mainly in the HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run and HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Run key.

  How to troubleshoot using the Msconfig utility in Windows XP
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 310560

• System Configuration utility

  I had a hotline to change how windows starts and clear my system for viruses etc.

  I have no w received a message on my pc every time you start by saying that the system utility is in diagnostic or selective startup mode.

  I need to choose normal startup on the general tab mode to start windows normally and undo the changes you made by using the system configuration utility. Help!

  Where is THE general tab and that make the changes I need to do when?

  That's why using msconfig to deal with start-up problems is the wrong way to go.

  To answer your specific question, click Start, then click Run, type msconfig in the box "Open", and then click OK.

  Running msconfig starts the System Configuration utility.  It has several tabs, the leftmost is the general tab you're looking for. Click the general tab and then click on the 'Normal Startup' radio button.  And then click OK.

  When you restart, you'll be in normal mode - but probably some problem has prompted "phone support" to run msconfig first place will return.

  If you want to fix things rather than simply hide them with msconfig, please post describing the problem that comes up when you restart in Normal mode.

• Why does not the "misconfig" system configuration utility

  I am trying to open the System Configuration utility using "misconfig" in the Run dialog box, kbut it does not and I would like to know why? I have to open the re0-boot utility to try to solve a problem I have. If someone can tell me another way to access the UTILITY, I'd appreciate hearing about this.

  You spelled wrong.

  Msconfig

  Steve

• When I try to use msconfig, I get an error message that reads; SYSTEM CONFIGURATION XRX55 100 24956__

  When you try to use the system setup, I get the following error message.
  An access denied error was returned while attempting to change a service.  You may need to log on using an asministrator account to make specific changes.  I am logged in as administrator on the computer.  I used to be able to make these changes up until October or November 2009.  I think that something could change when the automatic updates have been downloaded.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  Could you please answer these money questions?

  (a) do you have the latest changes on your computer?

  (b) error only occurs with the system configuration utility?

  Method 1:

  This issue may also occur if your computer security program blocking the system configuration utility, so disable the security program and check the issue.

  Method 2:

  If the steps provided above don't resolve the issue, and then create a new user profile.

  You must create a new user account and check the question of do you need to follow the steps below.

  Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.

  Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Click on create a new account.

  Type the name you want to assign to the user account, click an account type, and then click on create an account.

  Now search for the question.

  If the problem is resolved, then you can follow the link below to the difficulty of the corrupted user profile.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  For reference:

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/b07c4b83-d0b6-4207-a7aa-6209dd0f9a88

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• How can I open the system configuration

  I am running windows xp (version 2002).  How to find the system configuration?

  There is no 'system configuration' in the Panel (at least on my system).

  There is a System option which open to the System Properties screen.

  If mean you the System Configuration utility, click Start, run, and in the type box:

  Msconfig

  Click OK to open the System Configuration utility.

  If you want to see on your current XP configuration information, click Start, run, and in the type box:

  Msinfo32

  Click OK to open the System Information applet.

  It's the same thing you see if you click on start, programs, accessories, System Tools, system information.

• Windows XP Home Edition does not start: System Configuration Error Code purple?

  I ran recently on my Windows XP Home Edition SP3 computer system recovery and once the recovery is finished I rebooted the system and then this message and I'm stuck here.

  I don't have any disc that came with the computer because it was very long ago already. I tried to download the 'Home Edition Set Up disk for Floppy Boot Installation of Windows XP"Microsoft, but I can't launch the ff:

  Windows XP Home Edition
  Windows XP Home Edition SP1
  Windows XP Home Edition SP2

  I can't create the configuration of disk for home edition, SP1, and SP2 because this computer I use currently is a 64 bit and no floppy drive. That's why I downloaded this instead:

  Windows XP Service Pack 3 - file to Image CD ISO-9660

  From:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=2fcde6ce-b5fb-4488-8c50-fe22559d164e&displaylang=en

  I burned a DVD ROM, but I don't know what to do next. After burning, I reinserted the disc to your computer from the active autorun. Then I inserted the disc for my Windows XP that has "System Configuration Error" and I tried to restart it but theres just no autoplay or anything that the computer always crosses the "System Configuration Error" message and I don't know how to access the set up disc. What should I do? Help please... :(

  Hello

  Try the methods listed in the section below and check.
  How to resolve configuration errors by using the System Configuration utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• How to remove McAfee security scran more my boot of the System Configuration.

  Hi, my laptop is a Windows vista 32-bit, I have a problem to remove McAfee Security scran more my boot of the System Configuration. In fact, I had used the removal tool to remove the antivirus McAfee sofeware eralier. But when I opened my startup Configuration recently, I noticed that the McAfee security plu scran is still there, I have turn off, but couldn't delete it. Help, please. Thank you.

  Gary

  Hello

  1. are you able to uninstall successful McAfee software?
  2. is there an error message or error code while you uninstall McAfee software?

  Try the following and see if it helps.

  Method 1:

  How to uninstall McAfee Security Scan Plus? : http://service.mcafee.com/FAQDocument.aspx?lc=1033&id=TS100783

  See also: http://promos.mcafee.com/LegacyLp/en-us/affiliates/adobe/landingpages/np681.asp

  Method 2:

  Uninstall if you have any program name McAfee Security Scan Plus on your computer.
  Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  See also:

  Solve problems with programs that cannot be installed or uninstalled:http://support.microsoft.com/mats/Program_Install_and_Uninstall

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 3:

  The System Configuration utility displays the items that start with your computer. These items are usually in one of two areas. The registry or during startup.

  If you decide to prevent specific items from start until you can uncheck the in the System Configuration utility. Although this method is very good, it is ultimately preferable to delete them from the source. To access the common locations in the registry of these elements take a look in the following areas:

  Note : open the registry editor by clicking the Start button, type regedit into the search box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunOnce

  Hkey_current_user\\software\\microsoft\\windows\\currentversion\\run

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Runonce

  If you have disabled items in the System Configuration utility and want to remove the registry also they lies in one of the following locations:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SharedTools\MSConfig\startupfolder

  HKEY_LOCAL_MACHINE startupreg

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

• Is there a way to increase the size of aka msconfig window System Configuration?

  In windows 95 and 98, it was easy to increase the size of the System Configuration window, and there even a beautiful button "expand".

  It was possible to use the Win9X msconfig in XP, but it doesn't seem to work in Vista Home premium 64. Is it possible to increase the size of the window? Can I change a setting of registry or something in the .exe itself?

  I'm bored of ResEdit on old Macs.

  Hello

  N ° for some reason, the size of the window of the utility was locked in Vista and Win7.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information

  I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information. and that did not help. What to do now? The comment of Bios makes me fear that it could damage my computer forever. What should do? Help, please

  Hi Alan,

  Thanks for posting your query in Microsoft Community.

  I understand that the computer does not restart even after running Startup Repair and I will be happy to answer your query. I appreciate the efforts made to try to make it work. Let me ask you;

  • How do you run the Startup Repair?
  • Do you have Windows 7 repair disc?
  • Remember to no particular change in the computer before the show?
  • Have you plugged an external equipment, except the keyboard and mouse?
  • You are able to start the computer in safe mode?
  • What is the brand and model of the computer?

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  There could be several reasons why he's not leaving including hardware as well. In addition, it could be because the master boot record (MBR) has been damaged. When you try to use the Startup Repair tool to repair the MBR, the Startup Repair tool indicates that no problem was found or it does not work yet.

  If you have any connected USB flash drive or other external devices connected to the computer, if you please, remove them and try to run the Startup Repair tool.

  If you haven't tried using Windows 7 repair disc, you can try the following:

  1. Insert the Windows 7 disc
  2. restart your computer
  3. When asked if you want to boot from your DVD player, do it.
  4. Select your language, click Next.
  5. click on repair your computer
  6. Select the operating system you want to repair.

  You can also perform the system restore by selecting the restore point when you think it worked very well. System Restore, choose advanced options using the disc.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  I also recommend to contact the computer manufacturer to get the done diagnostic equipment.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• The system configuration does not

  I am running windows 7 and decided to try and resolve messages running and (does not) slow programs. I started to perform a clean boot, but when I had made the changes to the configuration window and clicked on OK the said title bar system (not responding) after waiting a considerable amount of time, I have not quit. When I return to the system configuration window, nothing has changed, but now my PC guard just hung in the system configuration window. The computer is now worse than when I started. I had not done something before.

  The first thing I recommend is to restore and filled to half of the changes that have been made with the System Restore utility. First to save open documents and close all programs and then click Start (or press the Windows key) and type s·ymakeUPS·e·Mr r·emakeUPS·o·r·e then select System Restore programs from the list above. When the system restore starts, click Next and choose the most recent restore point that precedes your attempt to create a boot environment. Follow the rest of the procedure described in this article.

  Restore system files and settings

  Once you have recovered your computer to its state before the attempt to establish a clean boot environment, start with an analysis of malware using a free scan like MalwareBytesanti-malware utility.

  It comes as part of the standard offers free and paid-for versions. For standalone scans and malware removal (but not real time analysis), the free version is usually more than enough.

  MalwareBytes.org

• What should I do when it says "Adobe Reader cannot open protected mode due to incompatibility with your system configuration"?

  What should I do when it says "Adobe Reader cannot open protected mode due to incompatibility with your system configuration"?

  Hi sharronw31229175,

  Please visit the below links for the same thing that it would be useful:

  Protected Mode Troubleshooting | Adobe Reader

  Adobe Reader cannot open Protected Mode due to a problem with the configuration of your system.

  Let me know how it goes.

  Kind regards

  Ana Maria

• EPMA Configure Database cause EPM System Configurator Crash

  It is an EMP 11.1.2.2 distributed environment on Windows 2008 R2 system patched to 300 for all installed products. The system worked all fine until the DBA required to change the passwords for security reasons.
  
  The passwords for the Weblogic administrator, the repository of databases has changed. We went through the system configurations and changed all the passwords in all the right places and everything works, except for the Dimension EMP architect server. All other product launch and we can identify you and use them.
  
  For the server architect EMP Dimension, we are unable to update the password for the database. In the EPM system configurator, when we choose to "Set up the data base" for EMP architect, we enter the connection information and click Next and the utility workers indicating an application error.
  
  The only mistake anywhere is in the configtool.log file which simply says:
  
  [2013 01-30 T 11: 34:00.420 - 05:00] [EPMCFG] [TRACE] [EPMCFG-01758] [oracle. EPMCFG] [tid: 16] [ecid: 0000JmCJgspEwGIFmrADS31H2KhK000003, 0] [SRC_CLASS: com.hyperion.config.wizard.impl.DBConnectionForm] is of type DB Oracle
  [2013 01-30 T 11: 34:00.420 - 05:00] [EPMCFG] [ERROR] [EPMCFG-01020] [oracle. EPMCFG] [tid: 16] [ecid: 0000JmCJgspEwGIFmrADS31H2KhK000003, 0] [SRC_CLASS: com.hyperion.cis.config.Configurator] error: []
  java.lang.NoClassDefFoundError: com, hyperion, cis, ISMPWizardServices
  at java.lang.Class.forName0 (Native Method)
  at java.lang.Class.forName(Class.java:247)
  at com.hyperion.cis.config.Configurator.loadClass(Configurator.java:172)
  at com.hyperion.cis.config.Configurator.loadProductDBConfigurators(Configurator.java:201)
  to com.hyperion.config.wizard.impl.DBWizardState$ 1.validate(DBWizardState.java:348)
  to com.hyperion.hit.wizard.Wizard$ NextClass.run (Wizard.java:531)
  at java.lang.Thread.run(Thread.java:662)
  Caused by: java.lang.ClassNotFoundException: com.hyperion.cis.ISMPWizardServices
  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
  ... 7 more
  
  ]]
  [2013 01-30 T 11: 34:00.420 - 05:00] [EPMCFG] [TRACE] [EPMCFG-01173] [oracle. EPMCFG] [tid: 16] [ecid: 0000JmCJgspEwGIFmrADS31H2KhK000003, 0] [SRC_CLASS: com.hyperion.config.wizard.impl.DBWizardState] default cluster was found in the registry: Performance Management architect
  [2013 01-30 T 11: 34:00.451 - 05:00] [EPMINS] [ERROR] [EPMINS-00001] [oracle. EPMINS] [tid: 16] [ecid: 0000JmCJgspEwGIFmrADS31H2KhK000003, 0] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] trace: unexpected error: []
  java.lang.NullPointerException
  to com.hyperion.config.wizard.impl.DBWizardState$ 1.validate(DBWizardState.java:360)
  to com.hyperion.hit.wizard.Wizard$ NextClass.run (Wizard.java:531)
  at java.lang.Thread.run(Thread.java:662)
  
  ]]
  
  We the ODAC uninstalled and reinstalled, but it has not made a difference. The user schema is not locked (confirmed through sql, as well as on the same machine as EPMA).
  Not updated in the product of the EMP password, because if we try to start the server of EPMA, it fails stating that the name of username/password is not valid.
  
  Guidance will be helpful, because at this point, the EPM architect is unusable.
  
  Thank you

  The reason is that the Oracle patch broke the jar AWBConfig.jar located
  d:\oracle\Middleware\EPMSystem11R1\products\Foundation\BPMA\Common

  There are missing classes in the patched version, latest of this pot

  To correct the configuration tool, you can make a copy of that existing pot and replace the old version uncorrected. To find the old version research
  \oracle\Middleware\EPMSystem11R1\.patch_storage\ to AwbConfig.jar

  To confirm this, look at the size of the current pot and the oldest pot - the news is 158 k and the former was 317 k - obviously a new miss some classes.

  Once you are done with the config tool put a "newer" back

  Nick