Similar Questions

• The night last update (May 11) caused my system to crash after re-booting.

  The night last update (May 11) caused my system to crash after re-booting. There were 4 updates that have been selected.  I've disabled the automatic update (will always to down load) and hidden updates (KB905866, KB890830, KB2509470, KB2536413). Otherwise, someone with this problem and know who is "bad"?

  The OS is Vista Ultimate, and until today, I was downloading/automatic update.

  Hi Mike,.

  Method 1:

  I suggest you to configure your system in clean boot mode and install each update on your computer. You must follow step 7 in the link to restart the computer in normal startup after the problem is resolved.

  Try to perform the update of windows and try to install an update at a time and check

  Restart the computer after the installation of each update.

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Method 2:

  Try to manually install the update, an update at the same time by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  If the problem is not resolved by any of the methods mentioned above, you can check the link for the problems with the installation of updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Database Oracle EPM system

  Hello

  The COnfiguration of Hyperion to oracle database character for Hyperion 11 sets: • AL32UTF8 (encoding UTF-8 to ASCII platforms) • UTF8 (coding for Oracle backward compatible) • UTFE (encoding UTF-8 for the EBCDIC platforms) is required to answer this with the database configuration conditions. Can we have more about considerations when creating database NLS_CHARACTERSET WE8ISO8859P1 NLS_NCHAR_CHARACTERSET AL16UTF16 NLS_NUMERIC_CHARACTERS., when the database was created. is that it creates no problem setting up database. Please notify.

  As long as you follow what is defined in the documentation you will be ok:

  Considerations for creating Oracle database

  The database must be created using Unicode Transformation Format UTF-8 encoding (character set). Oracle supports the following character with the UTF-8 encoding sets:

  • AL32UTF8 (UTF-8 encoding for ASCII platforms)
  • UTF8 (backward compatible coding for Oracle)
  • UTFE (encoding UTF-8 for the EBCDIC platforms)

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• my system kept crashing

  my system kept crashing so I did a system restore and I can not find my my files

  Hello

  System recovery would mean the computer configuration, this would remove all your files and programs installed on your computer.

  I suggest you to contact the respective computer manufacturer to verify the recovery options available.

• Restart causes the 'system thread unhandled exception '.

  Freezes in Windows 8.  Restart causes the 'system thread unhandled exception '. Windows restores successfully to earlier restore point start, but the questions is recurring.

  3 crashes so far because the computer was purchased at the end of February, 2014.

  All 3 minidumps are available at:

  https://onedrive.live.com/redir?RESID=7B6D641161EAE33%211120

  This disturbs my work whenever I need to reactivate my license of office until I can get back to where I was.

  How can I avoid this problem happen again and still be able to fully use my computer?

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
  It is a very common bugcheck.  Usually the PIN address of exception
  the driver/function that caused the problem.  Always note this address
  and the date of the picture link / driver that contains this address.
  Some common problems are the exception code 0 x 80000003.  This means a hard
  coded breakpoint or assertion was hit, but this system has been started
  / /NODEBUG.  It is not supposed to happen as developers should never have
  breakpoints coded hard in retail code, but...
  In this case, make sure a debugger must be connected and the
  system startup/DEBUG.  This will we will see why this breakpoint is
  happening.
  Arguments:
  Arg1: ffffffffc0000005, unhandled exception code
  Arg2: 0000000000000000, the address that the exception occurred at
  Arg3: fffff880031a2938, address of Exception report
  Arg4: fffff880031a2170, address of the context record

  USTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  Nom_processus: System

  CURRENT_IRQL: 0

  Error_code: (NTSTATUS) 0xc0000005 - the instruction at 0 x % lx 08 referenced memory at 0 x % 08 lx. The

  memory could not be %s.

  EXCEPTION_PARAMETER1: 0000000000000008

  EXCEPTION_PARAMETER2: 0000000000000000

  WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800d4fd3168
  Unable to get nt! MmPoolCodeStart
  Unable to get nt! MmPoolCodeEnd
  0000000000000000

  FOLLOWUP_IP:
  nvkflt + 37 c 2
  fffff880'03e187c2?              ???

  FAILED_INSTRUCTION_ADDRESS:
  + 37 c 2
  00000000'00000000?              ???

  STACK_TEXT:
  fffff880 '031a2b78 fffff880' 03e187c2: fffffa80'0d67d950 fffff880 '031a2e00 fffffa80' 0d67d950

  00000000'00230047: 0 x 0
  fffff880 '031a2b80 fffffa80' 0d67d950: fffff880 '031a2e00 fffffa80' 0d67d950 00000000'00230047

  00000000' 00000000: nvkflt + 0x37c2
  fffff880 '031a2b88 fffff880' 031a2e00: fffffa80'0d67d950 00000000'00230047 00000000'00000000

  00000000 00000001': 0xfffffa80'0d67d950
  fffff880 '031a2b90 fffffa80' 0d67d950: 00000000'00230047 00000000'00000000 00000000'00000001

  00000000' 00000000: 0xfffff880'031a2e00
  fffff880 '031a2b98 00000000' 00230047: 00000000'00000000 00000000'00000001 00000000'00000000

  fffff8a0'05c3b700: 0xfffffa80'0d67d950
  fffff880 '031a2ba0 00000000' 00000000: 00000000'00000001 00000000'00000000 fffff8a0'05c3b700

  fffff880'031a2c78: 0 x 230047

  nvkflt.sys

  Driver Description: Filter driver NVIDIA Graphics

  Driver update site: http://www.nvidia.com/Download/index.aspx

  Make sure all your display drivers are updated and if this does not work, uninstall and perform a clean installation.

  Guide on how to install the NVIDIA Windows 7/Windows Vista display driver (even in windows 8)

  http://NVIDIA.custhelp.com/app/answers/detail/A_ID/2900/~/guide-on-how-to-install-the-NVIDIA-display-driver-under-Windows-7%2Fwindows-Vista

  Good luck

• Problems starting 10.2.0.1 database under Windows (system breaks down)

  Work with a client and that they should start and stop where the database several times. Now, I can start Oracle service but when I try to start the database of the system, it blocks and that's the last thing in the alerts log.
  
  Mount of redo thread 1, with mount id 1863427492
  Thu Jun 28 17:47:20 2012
  Database mounted in exclusive Mode
  Completed: ALTER DATABASE MOUNT
  Thu Jun 28 17:47:21 2012
  ALTER DATABASE OPEN
  Thu Jun 28 17:47:22 2012
  Beginning of thread 1 crash recovery
  
  
  Is there a setting or size of something that is too small? Although it is early crash recovery it blocks the entire system. Is trying to use too many resources, that's why it crashes? If anyone has had experience with this, let me know. Thank you all

  kirkladb wrote:
  Work with a client and that they should start and stop where the database several times. Now, I can start Oracle service but when I try to start the database of the system, it blocks and that's the last thing in the alerts log.

  Mount of redo thread 1, with mount id 1863427492
  Thu Jun 28 17:47:20 2012
  Database mounted in exclusive Mode
  Completed: ALTER DATABASE MOUNT
  Thu Jun 28 17:47:21 2012
  ALTER DATABASE OPEN
  Thu Jun 28 17:47:22 2012
  Beginning of thread 1 crash recovery

  Is there a setting or size of something that is too small? Although it is early crash recovery it blocks the entire system. Is trying to use too many resources, that's why it crashes? If anyone has had experience with this, let me know. Thank you all

  post is 100% devoid of significant details.
  We see no accident.

  Please forgive us play 20 questions with you.

  File a Service request with the support of the Oracle!

• Satellite L655-149 - system keep crashing

  SYSTEM MY PHONE KEEP CRASHING, GOOD THING I CREATED A DISC REPAIR SYSTEM AND HAVE MY BACK-UP... BUT THE THING IS, I RESTORED MY COMPUTER TWICE IN THIS WEEK AND WINDOWS STILL CRASHING... NEED TO KNOW WHAT IS THE PROBLEM WITH THE SYSTEM COMMON CRASHING...

  WHAT SHOULD I DO? I HAD SOME VIRUS IN MY SYSTEM?
  Thank you...

  What exactly happens? Have you installed a software that can be a troublemaker?
  This happens with the own pre-installed recovery (without additional software) image?

• How do I uninstall the product from the Oracle EPM system

  Hi all

  y at - there no way how to uninstall a product of the Oracle EPM system?

  I don't want to uninstall the entire system and install again, I want to just uninstall the specific product.

  BR

  Vladislav

  OK, you can safely remove the service once the components have been uninstalled.

  Let me know which are the components you want to uninstall.

  To check the inventory:

  Go to the directory OPATCH. This gives the entire list.

  lsinventory-detail opatch - oh -jre

  Ex: opatch lsinventory-detail - oh D:/Oracle/Middleware/EPMSystem11R1/jre-D:, Oracle, Middleware, jdk160_45

  If you want to make sure that applications are not anywhere, you can also check in the following locations

  1. connect to the Weblogic administration Console, http://servername:7001 / console. Confirm if the managed server is removed by going to the servers

  2 EMP registry report (usually E:/Oracle/Middleware/userprojects/epmsystem1/bin/epmregistry.bat)

  3. Windows registry

  Thank you

  Anjum

• AMD OpenCL (15,200), causing the first pro crashing!

  The new version of OpenCL on the new AMD drivers is the cause Premiere pro to crash when it tries to load in a sequence videos!

  I know because I tried to uninstall the drivers who forced them to work of mercury which was very good however it uses my graphics CPU (which suck) and cause my PC hole trolling. If anyone knows how to disable OpenCL for CCPP or how to make it work with the latest version please tell me immediately!

  Thank you ~ Alex Williams!

  Yes I have and it is disabled. I managed to fix it by disabling the OpenCL mode in my first pro!

• J K L shuttle keys causing Premiere Pro to crash and stop. Someone having this same problem?

  J K L shuttle keys causing Premiere Pro to crash and stop. Someone having this same problem?

  Hi Abraham,.

  Sorry for this question.

  Changing the audio channel seems to be the cause of my problems. I have change audio channels on the video for my project it to appear on my preview window use J K L to Polish thru and it hangs and stop.

  This looks like a problem that we know. You can avoid collisions by turning off 2 Audio Preferences:

  • Maintain the pitch audio when the shuttle
  • Outputs multi-channel sum to Mono in the Source monitor

  See if your situation improves after the deactivation of these preferences.

  Thank you
  Kevin

• Start the EPM system

  I work in 11.1.2.1 in a distributed environment. When I click on the 'Start EPM System' shortcut in the menu programs, it starts only local services and not the services on the other two servers. I have some other problems with the environment, and I wonder if something prevents all services in the distributed environment to start.
  
  So I guess the question is: is this shortcut to start all services in a distributed environment? In other environments for the same customer, seems to be the case.
  
  Thanks for your time.

  He will begin the EPM service on the machine, it runs, if you want to start the services on multiple computers, you can develop your own scripts.

  Documentation
  "Running the unique on a computer startup script in your system deployment EPM starts all EPM system services installed on this computer."

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Work with EPM system Workspace

  Hello
  
  I would use the EPM system to its full potential, while I was trying to see if it was possible to open Excel and Access files within a content window / tab.
  
  I tried to import an Access file and he told me that I needed to create a new MIME type. I have skiped who moved to Excel to test. I imported the excel file into a folder where start with content.htm sample is no problem, added to Favorites and tried to open it but turned excel does not and it did not open within the area of the workspace.
  
  Anyway is there a documentation / blog that you can recommend me to explore the workspace, options and create a portal for end-users to collaborate?
  
  Thank you
  
  Published by: Icebergue on March 22, 2012 04:04 - typos

  Hello

  You can have a look here where all official documentation Suite EPM is: http://www.oracle.com/technetwork/middleware/performance-management/documentation/index.html

  Good luck!

  Published by: Ringo on March 22, 2012 13:09

• How can I know because of what table in database, causing the chaining line

  Hello
  
  
  Please help me that how can I know because of what table in database, causing the chaining line?

  Hello

  hope that you have already created the table utlchain. Or otherwise create as below.

  SQL > @?/rdbms/admin/utlchain.sql

  And try to run the script again.

  I tried with the following example in the following link.

  http://psoug.org/reference/chained_rows.html

  His works very well and it will list the tables.

  Or try the row chaining and Migration of line [ID 122020.1]

  It has all the necessary steps to do so.

  Thank you
  Rognard

• Break the effect of causes After Effects to crash

  Hoping someone can help me understand this problem. I created this rotation of the Earth in After Effects...

  .

  and I try to add a glow effect, but whenever I do, it causes After Effects to crash. I am trying to add the glow effect

  to the layer of Earth which has a CC sphere effect already added to it. I even tried to precompose that layer first, but it did not help.

  My computer has 9.0 GB of RAM so I don't think that's the problem.  I have CS4 v 9.0.3.8 any help would be appreciated.

  

  Make sure that you moved all attributes into the new composition all early component.

• 11.1.1.1 with WebLogic Server 10.3 EPM system

  I'm installing 11.1.1.1 EPM system and that you have already installed WebLogic Server 10.3, which seems to be the Oracle AS 10gR 3 GPE 11.1.1.1-compatible server.
  
  However, I get the following error:
  The specified location is a directory of Oracle AS 10 g 3 invalid. Specify a valid location.
  
  11.1.1.1 EPM system is compatible with WebLogic Server 10.3?
  Y at - it a 10gR 3 Oracle AS different I should use? If Yes, where can I get it?
  
  Thank you
  Mark

  Hello

  I don't think that it is officially supported for 11.1.1.1.
  Take a look on:-http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install_start_here_11111/ch04s03s01.html
  It lists the supported web application servers.

  See you soon

  John
  http://John-Goodwin.blogspot.com/