System resource files
Hello
I get the error 'Resource file system' in the device. I use BB 8300 whenever I am to access the file operation in the application. I get the above error. In the Simulator, but his works very well. No error when access to these files in the Simulator. I am also registered COD files.
The mention of the error above refers to using a FileConnection to access the built in memory to a BlackBerry handheld computer or a micro SD card.
What is the exact error and exception that you receive and what measures do you take? If you direct TCP connections, please see this link.
What is - maximum number of simultaneous connections
Article number: DB-00480
Tags: BlackBerry Developers
Similar Questions
-
FileIOException: System resource files
When I read 150 files from an SD card using fileconnection, there FileIOException: System resource files. So, I check if all my connection are closed that they are. So I reduced to 150 cases at 40, and it was no more such errors.
How to read all 150 files instead of reducing the number?
Thank you!
You can close the inputstream after reading the file. in the samples of the rim, they usually use a for this, finally block before I read a large number of files very fast, that should be enough.
-
BlackBerry Smartphones file system resources
System resource files
Dear BBSCF
I tried to open the word.doc.file on here today but kept this message telling me to file system of resources.
I saw it once before and has started to remove a large number of my messages through my BBEmail folder and it seemed to work.
Am currently student and not around a PC or laptop and my BB has done wonders for my life.
Don't know what to do when I'm apparently not as he moves after having erased so many messengers.I can not remove masses of unwanted in one mail, nor is tell a version phone Hardrive cleaner and Defragmenter.
I hope someone can direct me as to what I could do so I can resume my studies
The f
Hey jtv.
I had this happen several times in the past. One of the resolutions below usually works for me.
Resolution 1
- Close all open applications that can access the memory card or device of the media (such as photos, music, videos)
- Test again to see if you can open the file
Resolution 2
- Reset the BlackBerry smartphone by removing the battery for 30 seconds
- Test again to see if you can open the file
-
IOUtilities gives me an exception of the file system resources
I wrote an application to analyze lyric, the premiere, I use IOUtilities.streamToBytes to convert the integer to a byte [] and crawled, but after reviewing some files (7-10), I got an error of 'Resource file system', I don't know why it happens, here is the code.
private void parseFile(FileConnection LRC) throws IOException { byte[] LRC_byte = IOUtilities.streamToBytes(LRC.openInputStream()); LRC.close(); if (LRC_byte.length < 10) { // not valid return; } String encoding = DEFAULT_ENCODING; if ((LRC_byte[0] == -2) && (LRC_byte[1] == -1)) { encoding = "UTF-16LE"; } else if ((LRC_byte[0] == -1) && (LRC_byte[0] == -2)) { encoding = "UTF-16BE"; } else if ((LRC_byte[0] == (byte) 0xEF) && (LRC_byte[1] == (byte) 0xBB) && (LRC_byte[2] == (byte) 0xBF)) { encoding = "UTF-8"; } // // Do someting... // }
But after I change the IOUtilities.streamToBytes of inputstream, below is the code
private void parseFile(FileConnection LRC) throws IOException { InputStream input = LRC.openInputStream(); input.mark(3); byte[] encode = new byte[3]; input.read(encode); input.reset(); String encoding = DEFAULT_ENCODE; if ((encode[0] == -2) && (encode[1] == -1)) { encoding = "UTF-16LE"; } else if ((encode[0] == -1) && (encode[1] == -2)) { encoding = "UTF-16BE"; } else if ((encode[0] == (byte) 0xEF) && (encode[1] == (byte) 0xBB) && (encode[2] == (byte) 0xBF)) { encoding = "UTF-8"; } // // Do someting... // input.close(); LRC.close(); }
Now, everything works fine, I really donnot know why version 1 do not work, but version 2 works fine.
Why? What is the problem with the first version? It takes a day to find it.
It seems that you do not close the input stream in the first version of the code. Maybe it's the reason.
-
NET. RIM. Device.API.IO.file.
FileIOException: Systems of resource files what do I do? If I close the connections I don't understand these Codes and where their right... Please help me as soon as possibleOP is not really a developer - I also made him to get an answer to this.
-
LabVIEW: The file is not a resource file. The file is not a valid file for LabVIEW
Hello.
I used labview to make an assignment of the University. As part of the im supposed to transfer the .vi file to my teacher, but all .vi files sent using the e-mail system are corrupt. When I try to open mine it gives this error
LabVIEW: The file is not a resource file. The file is not a valid file for LabVIEW
Unfortunately, I also lost my backup as I was working on a lab computer and didn't upload my files on the storage server.
So I was wondering if someone can help out me. Thank you very much.
The problem is that the email system dealt with the file as a text file. All the
sequences have been replaced as . You can see this opening of VI in a hexeditor. Each VI begins with "RSRC". ". Your VI begins with "RSRC . I replaced the two occurrences of "RSRC"
with "RSRC". "and he opened in LV 8.6. Missing just a few controls and subVIs. I did this on Windows.
-
Why not enough system resources?
I manually copy a file of 15 GB in D: will lead the E: drive
System drive C: has 152 GB of free space
D: drive has 130 GB of free space
E: drive has 58 GB free space
Before you complete the copy process, it pops up a message of not having enough system resources.
Does anyone have any suggestions, what type of system resource is on?
Thanks in advance for your suggestions
Without addressing the question of whether space is available or not, I noticed you seem to be assimilating "system resources" to "disk space", that is, in most cases, a bad supported. For example, in KB967351 , the "resource" that is missing is a fragmentation limit and not a limit of disk space available. As a general rule, if there is a lack of disk space or RAM, an error message will tell you exactly that. The term "system resources" generally refers to some other limitation unassigned file or operating system.
FWIW,
JW -
Hello
I have a laptop Lenovo G550 with processor dual-core Intel, 4 GB RAM, 320 HDD with Windows Vista Home Premium 64-bit works fine yesterday. All of a sudden all processes be losed with strength and i' received e of error messages to send information or the rejection message. And then he suggested e to perform the disk check so I tried to restart to get the following message.Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014CI tried all the boot options like the boot safe mode, last known, good configuration but without success.I tried to fix it by using a Windows Vista DVD,Press any key to boot from the CD/DVD...I see a bar saying Windows is loading files in progress...After that, I get progress bar of Microsoft Corporation followed to a black screen.After 10 minutes or so I get a mobile mouse on the black screen pointer. And that's all, he remains the same for centuries.I am out of resources on how to solve this problem.Any help will be greatly appreciated.Thank you.Hello
That's what you should see when you use a Vista DVD take to do a Startup Repair:
http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/
You have obviously something wrong with it.
See you soon.
-
I had a virus fakespypro. After it has been deleted I can't access my resource file at startup. I need to reinstall windows vista to restore it?
Hello
This message is probably part of the scythe. Is there more information you can give about this?
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAutoruns - free - see what programs are configured to startup automatically when your system boots and you
opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
start the settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Eclipse plugin resource file not found during construction
I just installed the plugin Eclipse of BlackBerry and use it for the first time. I just created a HelloWorld application and the BlackBerry Assistant of the resource file plugin to create localization resource files. They were created in HelloWorld\src\Resources where HelloWorld is the name of the project. The wizard has created the files with names: HelloWorld.rrh and HelloWorld.rrc. I haven't added information for resource files. When I build the project in Eclipse, I get the following error. How can I fix it?
Problems to build the selected resources.
Errors under builder "BlackBerry resources Builder" of the project "HelloWorld".
Could not compile files
java.io.FileNotFoundException: G:\Eclipse\Workspace\HelloWorld\src\HelloW.rrh (the system cannot find the file specified)I tried to change the name of the HR Manager in HelloW.rrh file, but when I build the project, I get the same message but with the name of file as shown below. I know it is a problem of beginner raw, but I'm stuck. Any help will be greatly appreciated.
Problems to build the selected resources.
Errors under builder "BlackBerry resources Builder" of the project "HelloWorld".
NLS missing message: PackageUtils_PACKAGE_ID_ERROR_MSG in the: net.rim.eide.internal.util.messages
G:\Eclipse\Workspace\HelloWorld\src\Resources\HelloWorld.RRH (the system cannot find the file specified)Hi Berek,
Try this link http://na.blackberry.com/eng/developers/resources/A12_Localizing_V2.pdf.
You might have missed a step.
Thank you
Sandeep
-
After Effects and Media Encoder do not use system resources!
Hi all.
I have a small problem with the AE and me. None of them use all the resources of my computer.
I have 8 GB (2 * 4 GB) of RAM and an Intel i5 - 2500 K CPU.
When rendering previews, AE takes forever to load the clip (about a second image every 10 seconds). When rendering (encoding) clips inside of ME and AE, everything is extremely slow. This only happens when I'm making large compositions, or using pre-made (and very large) model effects.
Course of the coding, AE / ME use about 50% of the CPU and RAM, instead of the full capacity. Surely they would be better if the use of the full system resources?
I even tried setting the priorities of processes for AE and ME "Very urgent", but this doesn't make much difference.
AE already has 39 GB of space available for the cache, preview is disabled during the encoding in me. I gave them as much RAM in their respective preferences, but this makes no difference. I understand that the programs will be a bit slow when the compositions of work with high calibre, but they do not even use as much capacity is available on the system.
I take a little over an hour to encode 30 seconds a clip.
I hope you can help - much thanks in advance.
-phoenix
PS the two pieces of software is CS5.5
Nothing to correct because nothing is broken. The programs wil ltake what they need and not beyond that, or more specifically, what are their internal infrastructure can be used. Many encoding jobs require a strict linear processing, like many effects in AE, which severely limits the ability to use multiple cores / processors to anything. Moreover, things like access to the linear files in formats based video suite would consist of the issue. And finally, of course, it matters a lot what is happening in your projects. If your film is loading slowly, move it to a faster drive. If it is compressed, decompress / convert. If you use slow effects, replace them with faster commercial third-party plug-ins if you return to clips, speaker of image sequences. The list for the optimisation potential could go on and on, but suffice it to say that none of this implies simply by pushing a magic button or checking a specific option. You must learn these things and refine their experience.
Mylenium
-
Put into hibernation - insufficient system resources exist to complete the API (Tecra M4)
I just thought I'd pass on my experience with this problem.
I recently updated my Tecra M4 2 GB of RAM memory. Everything was fine except everyonce in a while he would not hibernate. However, it would suspend to RAM (standby). It seemed to happen after the antivirus software has managed to (which I had changed at the same time). I studied this way, but it also happened if I had a lot of programs running. So, a quick google search revealed why almost all laptops come with only 512 MB of RAM.
There is a problem with Windows, freeing the memory in a way that allows it to be written to the hard disk, preventing the hibernation and to create the very vague error message "insufficient system resources exist to complete the API".
The solution is to contact Microsoft by phone and ask them for the fix for the #909095 of the Knowledge Base article. The fix is free but the MS site makes it seem as if you have to pay £200 to contact Ms support
This seems to have solved my problem!
Hooray!This is the Knowledge Base article:
http://support.Microsoft.com/?kbid=909095Here's the Blog I found the solution on:
http://www.ntwizards.NET/2004/10/13/Hibernate
Of course, the only problem with contacting MS support is that I received a LOT of phone calls asking me what I thought of their support... it was very good, so I don't really mind, but I find it funny that I continue to have called and asked the same questions!Hi Kelly
Thanks for this useful information.
It of very nice that you posted this tip. I think that it s very useful for users of the forum who might have the same problems on laptops.Concerning
-
Satellite L300-11V - system registry file is missing or damaged
Need help, I have a laptop Toshiba Satellite L300D-11V, which, when turned on gives the message that the system registry file is missing or damaged.
My problem is that when the first installation program, I did not back up files of recovery on DVD in the event of such problems like this, my questions are, is there any way around this without the recovery disk to reinstall Vista from hardrive?
I can't find a way to do this or Toshiba will provide a recovery disk or a software download (for free or to buy) and it is the only option that is available to solve my problem?
The laptop is still under warranty for another 11 months am I covered for the hardware/software in this situation he has taken over the shop I bought that they said they couldn't do anything without the recovery disk.
Help, thanks in advance.
Hello!
You can reinstall Vista without the recovery disks. If want to repair your computer by restoring it to the original factory State, you can do so directly from the hard disk (press F8 when you start your computer, choose "Repair your computer"
"and follow the instructions in the menu).Normally you had recommended to burn the recovery disk when you first start. There is a reminder that pop ups from time to time to burn the disc.
Toshiba does not provide a software download, it is all preinstalled on your laptop.After the reinstallation, please create the recovery disk. If you need it and didn't burn this, you have to pay.
Good bye
-
Tecra M5: "insufficient system resources exist to complete the API"
Symptom:
When you try to Hibernate new notebooks Tecra M5 with-online 1 GB of RAM, the error message "Windows - system error. "Insufficient system resources exist to complete the API" appears and laptop crashes hibernate until you restart XP. This problem may be present on the other model with-online 1 GB of RAM.Difficulty: http://support.microsoft.com/?kbid=909095
PS. you need to call Microsoft to get the fix.
Hello
I studied on the Toshiba site and found this one.
Please check this useful Toshiba FAQ document:
http://support.toshiba-tro.de/KB0/FAQ6201CE000SR01.htmGood bye
-
Add 9188 Chassis to the system definition file (sdf)
I want to measure the basic in Veristand 2011 without a custom device channels. In the system definition file, how can I add a 9188 chassis? And how do I add a thermocouple on channel 0 on a series c 9213 module? Thank you!
Hello
You work with a Windows or device in real time?
If you use VeriStand able to work with a Windows-based system, the addition of a cDAQ-9188 should not be a problem; the equipment Discovery Wizard he will come if it's in the same network as the Windows computer. Having problems with this?
If you have a real-time like a Pharlap ETS PXI controller running target, you will not be able to use the cDAQ-9188 at all because it is not supported in real-time operating systems. If you work with a target in real time and you need the CompactDAQ you either move to Windows or we a USB CompactDAQ instead, like a cDAQ-9178.
Please refer to this topic. The second post made by a Product Support Engineer and I was able to confirm that the information is still valid even for the latest versions of NOR-DAQmx and VeriStand. You can also check the compatibility in real-time in the Readme of NOR-DAQmx 15.5.
Kind regards
Maybe you are looking for
-
Pavilion G6 - 2163sr: Max RAM computer laptop HP Pavilion G6 - 2163sr
Hello I want to improve my laptop for 2 * 8 GB RAM. Motherboard supports this amount of memory? So understand, my motherboard model is HP 183rd (U3E1) but I didn't find its specification in the web. Thanks in advance.
-
My Apple ID has been locked for security reasons. I have all the details to recover my account that the account was created by a child of 6 years. How to unlock my account to use the same? < email published by host >
-
I use the tools of protection on Windows XP with encrypted drive. XP was suspended so I ran the check disk etc. - still suspended So I edited services / system / boot.ini I spent off too of and windows says "the system cannot log you» How to reset ac
-
Sound on Qosmio X 550 problems
I have a Toshiba Qosmio X 550, I7 Quad core 1.73 Ghz, 8 GB of RAM, NVIDIA GT360M, 1 TB of hard drive and windows 7 64-bit. I have a question: my main speakers, I guess use contextnat high definition audio driver. But since I have the Nvidia graphics
-
I installed Windows 8 on an HP dv6-6096 nr, I bought in May 2011. I did an upgrade to Windows 7 Home Premium. Every time I hightlight Control Panel, the machine returns to the desktop. How can I fix it? I thave updated my video drivers. I say what ot