Similar Questions

• Esxi5.5 scripted installation fails on "tools.t00: file not found" during the sequence of tftp

  Hello

  I realize this has arisen before but other that the proposed upgrade to v4 pxelinux.0 solution (which I did), I can't solve my current problems of pxeboot default due to #.

  Tools.T00: file not found on a network of esxi 5.5 installation

  That's what I see in the tftp log:

  Dec 09 17:07 ptc34551.hursley.ibm.com as [14604.1840335168]: /esxi55/tools.t00 to 9.20.170.34:49234 serving

  Dec 09 17:07 ptc34551.hursley.ibm.com as [14604.1840335168]: width option-> 167559911

  Dec 09 17:07 ptc34551.hursley.ibm.com as [14604.1840335168]: blksize option-> 1408

  Dec 09 17:07 ptc34551.hursley.ibm.com as [14604.1840335168]: file asked to increase much, BLKSIZE

  which according to VMware KB: ESXi 5.x fails to install when using PXELINUX is due to running a 32-bit version of pxelinux.0

  rpm of syslinux containing pexboot.0 is syslinux-tftpboot - 4.02 - 7.2.el5

  The other suggestion to avoid tftp to build the vmware host must use nfs in the boot.cfg settings. https://communities.VMware.com/message/2163034#2163034

  It was a post that not solved and the settings, I did to get the system to build via nfs instead of tftp failed

  If anyone has any ideas it would be great

  Concerning

  Paul

  Hi Paul
  Tools.T00 contains the iso files that you will need to install vmware tools.

  An installation without tools.t00 seems to be fully functional - but I'm not 100% sure on this subject.
  My suggestion has been designed for troubleshooting - so if possible to continue your search for the real problem.

  Your tftp can be used not the largest files x MBs - either you hit a timeout - because the package does not arrive fast enough.

  Ulli
  (here I made a testsetup without tools - if I find other missing features I'll let you know...)

• error message again - "file PSD Shell Extension resources < C_PsdRsDll > not found".

  I get an error message that says:

  PSD Shell Extension

  Resource file not found!

  What is this and how do I get rid of him?

  
  

  http://helpdeskgeek.com/how-to/resource-file-c_psdrsdll-not-found/ MS - MVP - Elephant Boy computers - don't panic!

• file not found string in FDM resources

  Hi gurus
  
  IAM getting an error #string resource file not found < font color = "red" > < / police > when I opened the FDM Workbench client.
  
  Please do the needful.
  
  concerning
  Dev

  Hi all

  
  

  Solution:

  To resolve this problem, you should reinstall the component of FDM Workbench using the EPM system on the FDM Server Configurator.
  A note of caution:
  Due to the new bug 13596802, when you reinstall the FDM Workbench, it will cause the option produces FDM to disappear from the EMP system configuration.
  This does not affect the system somehow.

  If you want to avoid this situation, you must apply one of the 2 following workarounds:
  1 re-install all components FDM installed on the server, even if you only need to re - install one component as the FDM Workbench FDM as in this particular case.
  2. a copy of the following file: "EPM_ORACLE_HOME\common\config\11.1.2.0\product\fdm\11.1.2.0\default_fdm_1.xml" before the re-installation. Once the reinstallation is complete, restore the file to the location of the "EPM_ORACLE_HOME\common\config\11.1.2.0\product\fdm\11.1.2.0\".

  The bug that the above concerns only the line of code 11.1.2.0.xxx of FDM.
  Later version are not affected.
  Specific to Windows 2008 64 bit problem

  Concerning

  Dev

• I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear

  I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear. It is one of many files that I should I cancel or continue? I pressed on continue in the past and I could not open properly Oracle. Sql Please HELP!

  63f5a1a9-ECA2-4300-B10f-22cd940a8726 wrote:

  I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear. It is one of many files that I should I cancel or continue? I pressed on continue in the past and I could not open properly Oracle. Sql Please HELP!

  It is a symptom of textbooks classic does not have read and followed the original instructions to prepare the downloaded files.  You should have two files zip files.  They both must be decompressed in the same directory.  If you unzip using Windows graphic interface - in right click on the name of the file and selecting "extract all...". "the default behavior will be to create a directory, the same name as the zip file and extract in it.  Thus, file_1_of_2 pulls in directory_1_of_2 and file_2_of_2 extracted in directory_2_of_2.  You must override this stupid behavior by default and specify the directory yourself.  And specify the SAME directory for both files.

  Or just go to a command prompt, change directories to the directory where the two zip files are located and deliver "unzip " and "unzip ", and they will both be properly unpack to a directory named "database".

• Debug problems using EPCO, zipalign.exe file not found

  Hello

  I am trying to debug an application of CRG using EPCO in an emulator or a device, but an error message in the console:

  free sign:

  [echo] Signature final apk...

  [zipalign] Running zip align the final apk...

  BUILD FAILED

  C:\Users\Jampa\workspace\LunaMAF\MAFeclipse\.main.android\bin\build-Android.XML:232: The following error occurred during the execution of this line:

  C:\Program Files (x86)\Android\android-sdk\tools\ant\build.xml:1139: the following error occurred while executing this line):

  C:\Program Files (x86)\Android\android-sdk\tools\ant\build.xml:1156: the following error occurred while executing this line):

  C:\Program Files (x86)\Android\android-sdk\tools\ant\build.xml:335: Execute failed: java.io.IOException: cannot run program "C:\Users\Jampa\workspace\LunaMAF\MAFeclipse\.main.android\bin\${zipalign}": CreateProcess error = 2, El sistema no can find el archivo especificado ("file not found by system"))

  I have installed:

  -Oracle Enterprise Pack for Eclipse

  -Android SDK:

  > Tools, Rev 23.0.26

  > Platform-Tools, version 20

  > Build-Tools, version 20

  > API 19 (4.4.2).

  > API 17 (4.2.2)

  The platform of my system is Windows 7.

  I hope someone can help me!

  Hello

  You can try the following?

  In the repertoire.main.android/bin under your editing project open build - android.xml and make the following changes:

  line 235 Add the--build-dependency of configuration as shown in bold:

  line 228 similar change:

  Note that there is a very preliminary difficulty and that he needs tests because it can have other side effects and may not work with the SDK of 22.6.

  Thank you

  -Raj

• go to a web page, firefox will pass it to a "file not found" but arrow to the left shows the page then goes back to 'file not found' again.

  for example. Google 'bc spca', choose www.spca.bc.ca and go. Firefox gives me this...

  File not found
  Sorry, the page you requested was not found. Please try again.

  Original URI: /assets/tab_advocate_mo.jpg

  But if I hit the arrow to the left, it shows me the page I searched for a fraction of a second, then goes back to the file not found again. This does not happen with Chrome or Internet Explorer. They go to the appropriate page.

  I am running windows 8.1 and uninstalled and reinstalled Firefox. NO GO. Help, please.

  Generally if an image on a page can not be found, Firefox does not redirect the entire page with an error message. the area of the image is just left in white. If this is not normal.

  On the error page, what do you see in the address bar, if anything?

  To check if one of your extensions could be the culprit, could test some pages from Firefox Safe Mode problem? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  Not all add-ons are disabled: Flash and other plugins still works

  After stops in Firefox, a small dialog box should appear. Click on 'Start mode safe' (not reset).

  Any difference?

• all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not helping

  all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not help somehow

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • http://KB.mozillazine.org/Error_loading_websites

  You can try to reset (power off / on) of the router.

• LoadPanel fails with error-94 file not found code unless I am in debug mode

  I've written a dll that has a number of panels in a .uir file.

  When I have it, debug using "debug SeqEdit.exe", everything works fine.

  But, if I just use "run SeqEdit.exe" (without debugging and using the same sequence file, I get the error message:)

  "Error in the call to LoadPanel.

  Handle of parent of Panel: 0,

  The IUR filename: HiPot.uir.

  Resource Panel ID: 4.

  Error code:-94

  File not found. "

  The IUR file is always in the same place, the only difference is that I do not use the debug option.

  It's probably something simple I've forgotten?

  You should not use LoadPanelEx in this case?

• EXEC file not found OCX, virtual, or low memory, connection has expired in Web sites

  Original title: frustrated Surfer

  Get "OCX file not found Exec" and every day I have ASUS virtual memory low or out. Scroll often does not and most of the time 'egg timer' turning, so slow sometimes websites Time out until I'm done. PLEASE HELP, or it's time for the big trash can in the sky? Lap top is more than 10 years old now.

  Hey,.

  It would help if you could answer these questions in order to solve the problem.

  -What version of Windows you are using on the laptop?

  -When exactly you get the error "Exec of OCX file not found '? It is when you start the computer or by accessing any program?

  -How did the laptop connected to the router? Is it wireless or wired?

  -What anti-virus software is installed on the computer? You have scanned the computer?

  -Remember to make changes on the computer? Updates/programs installed?

  Try these steps and let us know if they help.

  a. for the error message "exec OCX file not found", put the computer in start state in minimum mode and know what software is causing this error message.

  http://support.Microsoft.com/kb/331796

  Note: Once done troubleshooting, put the computer to normal mode according to the steps in "how to regain a normal Windows startup mode.

  b. increase the size of the virtual memory according to the steps in http://windows.microsoft.com/en-in/windows7/change-the-size-of-virtual-memory . Restart the computer so that the changes are applied.

  Note: the steps apply to Windows 7 and Windows Vista.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sysdm_advancd_perform_change_vmpagefile.mspx?mfr=true (Windows XP)

  C. follow the steps in http://support.microsoft.com/kb/936211 and check if you have full connectivity when you access Web sites. Also, download and install the latest drivers from the laptop manufacturer's Web site network.

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Whenever I restart my computer, SolutionCenter.msi error - path / file not found

  Something has happened and am now get error message every time I reboot computer:

  "The feature you are trying to use is on a network resource that is unavailable."  It is said to enter the alternative path.

  I don't know how to proceed.

  What should I do to fix?

  Thanks for the quick response!

  Original title: SolutionCenter.msi - path / file not found

  Hello9 Cathy Lind,

  The problem is related to the HP printer software. If you have an HP printer, go to programs and features to uninstall and reinstall.

  Please watch the lower thread for a suggestion help your question:
  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/6d2d77f3-1115-42ef-94cc-aa7d4343a23e

  Let us know if that helps.

  Marilyn

• "File not found: hard (blah blah blah)" error power on VM but file No. Longer specified in. VMX

  The 11 workstation, I receive the following error message, try to start a copied virtual machine:

  File not found: C:\Share\Copy drive\Windows C VM XP Professional XP model 50 GB-000005-cl1-000014 - cl1.vmdk

  This file is required to power on this virtual machine. If this file has been moved, specify the new location

  The. VMX file stated that:

  scsi0:1.present = 'TRUE '.

  scsi0:1.filename = "C:\Share\Copy of the drive\Windows of VM XP C XP Professional model 50 GB-000005-cl1-000014 - cl1.vmdk.

  scsi0:1.mode = "independent-persistent."

  But these lines have been deleted.  I have attached the edited VMX file that causes Workstation generating the error.

  If this VMDK file is specified is no longer in the VMX file, where Workstation becomes the name of the file when it produces the error message?  Why it generates this error message?

  The steps that I've taken to try to resolve this problem:

  1. close and re-open my computer.

  2 reboot the host (Windows Server 2012 R2 Essentials)

  I am answering my own question here.  The problem turned out to be in the virtual machine. VMSD file.  The file apparently contains a 'roadmap' of snapshots and registrations for the drive there, I removed from the. VMX file.  After removing the references to these pictures inside of the. VMSD file, I still met a configuration error because the number of snapshots is always set to '2 '.  This isn't the number of snapshots that you would normally think during a snapshot; on the contrary, it is the number of virtual drives for which there are snapshots.  After making the following change:

  snapshot.numSnapshots = '1 '.

  the virtual machine starts to the right without any problem.

• "File not found" - cannot use Windows

  I was rearranging some files on my Mac, and since I restarted merger, I get the "File not found" error when you try to start Windows. During the conversion of the records, I was still able to use the Fusion and windows, so I don't think that there is no problem. I'm fairly certain that I did not remove the file for Windows & Fusion, but now I can't use Windows and I am in desperate need of it. Here's what I see. Any help would be greatly appreciated.

  

  The default location to store the virtual machines is ~/Documents/VirtualMachines.

  You have moved the file vmwarevm of Windows 7 to another location.

  If you remember to move this file to another location, you must manually navigate to the new location and open the file (Windows 7 vmwarevm). Merger will create a new entry in the library and you will be able to access Windows 7.

  If you don't remember the location, try searching Windows 7 or Windows 7 vmwarevm in the spotlight.

• Beginner question: get the file not found error, when the file exists

  I'm in developer edition Coldfusion9 on Ubuntu 10.10 x 64.  I followed the tutorial found here. So far, I was able to do everything with the exception of the visualization of my pages in the browser.  When I try to view the page, it gives me the error shown below.

  I have been using cfEclipse to build pages and I followed the instructions as much as I can, the difference is that I replaced the paths of Linux for windows those.

  Thanks in advance

  Error occurred while processing request

  File not found: /home/forrest/workspace/Learning/Gallery.cfc

  Resources: Check the ColdFusion documentation to verify that you are using the correct syntax. Search the Knowledge Base to find a solution to your problem.

  Browser Mozilla/5.0 (X 11; U; Linux x86_64; en-US; RV:1.9.2.10) Gecko Remote address 0:0:0:0:0:0:0:1 Referrer Date/time October 11, 10 10:44

  Stack trace

  coldfusion.runtime.TemplateNotFoundException: File not found: /home/forrest/workspace/Learning/Gallery.cfc      at coldfusion.filter.PathFilter.invoke(PathFilter.java:90)      at coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:27)      at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70)      at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:28)      at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)      at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46)      at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)      at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)      at coldfusion.xml.rpc.CFCServlet.invoke(CFCServlet.java:138)      at coldfusion.xml.rpc.CFCServlet.doGet(CFCServlet.java:264)      at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)      at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)      at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)      at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)      at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)      at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42)      at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)      at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)      at jrun.servlet.FilterChain.service(FilterChain.java:101)      at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)      at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)      at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)      at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)      at jrun.servlet.http.WebService.invokeRunnable(WebService.java:172)      at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)      at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)      at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)      at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

  grog says:

  @David thanks of Watts for the help that I tried to change the port to 8300 that does not work.  That makes sense, I think because I have to go to 'http://Mypc:8500 / etc. in order to get to the CF administrator.

  This means that content in the/opt/coldfusion9/wwwroot/directory will be served to the top by the url http://Mypc:8500 /.

  I.e. /opt/coldfusion/wwwroot/myFirstColdFusion.cfm == http://mypc:8500 / myFirstColdFusion.cfm

  Unless you did something to the underscore configeration to change this behavior.