System Restore cannot be started from any level, including the command line.

Similar Questions

• Start an application saved on the command line

  Hello

  first of all that I do not know how I can start my data .exe on the command line, I know that. I need a few more tips.

  My problem is that I start my program and set values in my interface and then I save my interface. You can say that I am creating some options with different parameters (option 1, option 2, option3). Now, I would like to open this option on the command line. So first of all the program begins with option1 when this option is over that option 2 should start (I will also create a handler of signals which gives me a feedback if the option before closing).

  It should be like this:
  Path\Application.exe option1 option2 option3

  But know that I have a problem. When I save my slab (SavePanelState) I can not open such a Panel is saved with the command "LoadPanel". In help, there is also information that you can load only such a panel with the RecallPanelState command, but with this command you only update the interface. Now my question is, how can I savel a panel with its States and call it with the command LoadPanel? Or is the only way to load a group of experts and to recall the values the command of RecallPanelState?

  Best regards

  Unortunately there is no way to directly open a control panel preconfigured with controls other than in their default state. You have already discovered it and I can confirm that this can not be changed. However, if you call LoadPanel and RecallPanelState front showing the Panel, that the user will directly see the Panel custom, which is more or less what you are looking for.

• type it the password of the account, it says the user profile service Service failed the profile logon.user cannot be loaded.on from the system restore, it said: System Restore could not start. What should I do? __

  type it the password of the account, it says the user profile service Service failed the profile logon.user cannot be loaded.on from the system restore, it said: System Restore could not start. What should I do?

  Have a look here:
  http://support.Microsoft.com/kb/947215
  or here:
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

• Error: System Restore cannot create a restore point.

  When you start System Restore, I get the error message from Web page "line: 166; "Error: unspecified error."  When I continue to try to create a new Restore Point, I get the message "System Restore cannot create a files.  Restart the computer, and restart System Restore. "Restart the computer does nothing for me, it simply again creates the same mistakes.

  Hello

  
   

  1. don't you get an error code along with this error message?
  2. have you done any change in software on the computer lately?
  3. have you installed a third-party backup software?
  4. do you have Norton or McAfee installed?

   

   

  Method 1.

  Try the steps listed in the article below and check.

  You cannot create a restore with a HighPoint driver installed
  http://support.Microsoft.com/?kbid=322246&SD=RMVP

  Method 2.
  Temporarily disable the security software installed on the computer and check if the problem persists.
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 3.
  Please check if you are facing the same question when working in safe mode.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows XP Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows XP.
  e. when Windows starts, try using System Restore and verify.
   
  Hopt this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• System Restore does not start.

  I use windows xp media edition.  The system restore does not start.  I lift the box, but when I click next to choose a system restore point, nothing happens.  Help!  I tried to do it in safe mode, but it does not either here.

  Running sfc/scannow won't help you.

  It's nice when sfc/scannow runs silently and can't find anything to do, but if your installed Service Pack does not match the Service Pack of your true XP bootable installation CD, it will complain (much).

  Norton is notorious for interfering with SR, so much that they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  Sometimes the system restore is so distressed that you just need to reinstall the system restore (you don't need to reinstall XP - just the part system restore).  The downside to this is that, in doing so, you will lose all your current Restore Points.

  If only the SR calendar is showing a blank white screen where the calendar should be empty, this means usually the jscript.dll file became somehow unregistered and you can re-record it, but who does not exactly sound like your situation.

  It does not hurt to re-register the DLL files, even if they do not need renewal, you can run these commands and then check your SR:

  Click Start, run, and in the box enter orders following one at a time.  Click the OK button to execute each command one at a time.

  regsvr32 jscript.dll
  regsvr32 vbscript .dll
  regsvr32 /i mshtml.dll (it's a look of slash)

  The last order for mshtml load the DLL but can also contain a harmless warning depending on your environment.

  I guess that Norton is somehow interfere well, but running that SR mode without failure is usually the remedy to this situation.

  If that does not receive your SR going, then maybe some other people have ideas.

• System Restore does not start and the creation of a shadow copy times out

  What should I do if the system restore does not start, when creating a shadow copy times out?

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  1. don't you make changes to the computer before the show?
  2. What is the accurate and complete error message you get?

  I suggest you try the steps suggested by Gokul T on September 8, 2010 and see if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/system-restore-will-not-start/16c201d3-3932-40e4-883C-502f701b077f

• System Restore cannot create restore, point because the "shadow copy provider had an unexpected error." What can I do?

  Have a Dell Inspiron 1545 with Vista.  System Restore cannot create restore, point because the "shadow copy provider had an unexpected error."   What can I do?

  Hi JamesParwulski,

  Method 1
  I suggest you to scan SFC.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.
  http://support.Microsoft.com/kb/929833

  Method 2
  I suggest you perform a checkdisk.

  Check your hard drive for errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

• Did a system restore complete with built-in recovery partition on the hard drive, the recovery went well, but the computer is still slow and freezing.

  Original title: computer always slow and freezing after clean install

  It is a compaq 2007 desktop running windows vista premium, I work on it for a friend, they said he was running slow and freezing up all the time so I just went ahead and did a system restore complete with built-in recovery partition on the hard drive, the recovery went well but still have the same problems with the computer being slow and freezing up. any help would be appreciated thanks.

  Hello

  
  Step 1: I suggest you try the steps in the Sub articles to solve the problem of vista performance.
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-computer-speed-and-performance-information
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-maximum-performance-from-Windows-Vista-from-Windows-Vista-inside-out
  Step 2: You can also check if the problem persists in the clean boot state.
  
  Put your boot system helps determine if third-party applications or startup items are causing the problem.
   
  Try the steps in step 1 in the article to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How to customize my mozilla like gmail. (connection from any PC in the browser to get all my saved favorites)

  I NEED TO ACCESS MY BRPWSER ON DESKTOP FROM ANYWHERE IN THE WORLD... LIKE GMAIL...

  How to customize my mozilla like gmail. (connection from any PC in the browser to get all my saved favorites)

  (Personal information removed by the moderator. Please read the Forum rules and guidelines - m)

  Sorry, that Mozilla does not offer a feature like that.

  Check out Xmarks. http://www.Xmarks.com/about/features/overview

• Software Distribution Service 3.0. my wallpaper, all my documents, my videos, my photos, my desktop shortcuts, etc. all gone. has had to do a system restore. How can I avoid this in the future?

  XP Professional 5.1.2600 Pack 3. Automatic updates are on. After that an automatic update on Mei and June 2012 identified as Software Distribution Service 3.0 my wallpaper, all my documents, my videos, my photos, my desktop shortcuts, etc. all gone. has had to do a system restore. How can I avoid this in the future?

  Software distribution service 3.0 is a system restore point, not an update.

  When an update is installed a SDS is created.

  To check the name of the update, go to the Microsoft Update Web site and check your update history, search for the date, that the error occurred.

  Also make sure that your system is clean:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  I guess 'Mei' is your abbreviation of Microsoft Security Essentials under your antivirus protection, is this correct?

  After return with answers to the questions and the results of the analyses.

• How to pass variables by using the command line when starting from a native application ActionScript

  How to pass in variables or arguments to start using the command line when starting a native ActionScript application? For example, I have my app MySweetWidget call and it was compiled with Adobe AIR runtime in captivity so now I have MySweetWidget.exe.

  In the command line, I call MySweetWidget.exe and would like to pass in variables or properties of the application. I guess that these variables are read from the loaderInfo.parameters object.

  Please let me know if the Adobe AIR runtime supports passing the parameters to native execution. If so, I would like to help determine the correct format of how pass variables. So would you want to read those loaderinfo.parameters object?

  Thank you

  Jeff

  I found the answer to my own question:

  Yes, it's a feature supported. It is documented on the following page:

  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/Flash/desktop/NativeApp lication.html #event:invoke

  When you subscribe to the event from the NativeApplication invoke it will subsequently send the event and you read the table of e.arguments object to get the start in the native application arguments.

• Need the command line to restore the system to the Task Scheduler in Windows 7

  The task in the Task Scheduler to run the regular restore points has been removed. I need to re-create the task.

  I know that all settings other than the delivery of the program and options. That's what I need.

  It comes a host of Windows 7 Ultimate 64-bit.

  Thank you.

  For the record, I found the answer myself. It is within an article that lists as scheduled tasks in Vista. The KB is:

  http://support.microsoft.com/kb/939039 , "Description of the scheduled tasks in Windows Vista". The command line that I needed is:

  %windir%\System32\rundll32.exe c:\windows\system32\srrstr.dll, ExecuteScheduledSPPCreation

• "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:

  "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" -how can I solve this problem? I have Windows 7.

  Hello

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: we will install Microsoft Visual C++ for your computer package.

  Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).

  If you use the 64-bit operating system, download and install edition(X64) 64-bit.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Method 2: Run the fixit available at the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also, check the event log using Event Viewer.

  Please see the link below for more information on how to use Event Viewer to check the error message or information,

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  If you have additional problems, please reply to this post and we will be happy to help you further.

• WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  «WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.»

  This cams almost for all the applications that I try to open. I read all kinds of things to solve problems, but I can't install anything because it is constantly on the screen.

  I think it's like that because my computer shuts off when I was doing the system restore, because he has not started.

  I don't know what to do.

  Hello

   
  You can view the event log by using Event Viewer. See the link below for more information about how to use Event Viewer to check the error message or information,
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Please check the information in Event Viewer and let us know the problem more briefly for a better solution.
   
  
  Method 1:
  However, try the SFC (System File Checker) scan on the computer. Check out the following link to do the same thing:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 2:
  You try to run the fixit given in the following link and check if it works:
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

   

  Method 3:

  You have recently updated with Microsoft Visual C++?

  http://social.technet.Microsoft.com/forums/en/itprovistaact/thread/5491a46a-57f4-444D-a1fd-2600fa6d587e

  I hope this helps!

• How can I enter in the start page of the command line "firefox.exe"?

  I want to write a script to use firefox to download information about a series of addresses on a street. For example: 101 State St, 102, 103 State St State St,... etc. The script will travel addresses and streets, on interest. Firefox.exe accepts command line parameters that define a web page specific and data to be filled in this page?

  You can start Firefox to open a specific web page or a local file by adding the url to the command line, but you cannot specify the data to display, unless these data does not appear in the page source.

  • https://developer.Mozilla.org/en/Command_Line_Options