System Restore shows no restore point

Similar Questions

• The system restore points, how can be stored/kept?

  I had problems restore XP on the computer of a friend.  I can't after installing SP3, a question that will be asked in a separate post.

  In an effort to not having to do a full system recovery on the computer in question, with this latest attempt to recover the operating system and install all updates, I started the creation of restore points for the system after each step, I took to get things running and upward.

  And that is, after installing SP3, with installation fails and then going back until the restoration of the system to an earlier configuration, I found none of the points longer existed the system restore.   :-(

  Is there a maximum number of restore points in the system that can be stored in XP and later Windows operating systems?

  Hey, Jose,

  I'm sorry for the late reply to your post, but I removed the weekend baby a bad back that makes me mad.

  I'll try to put your comments in quotes, with my response immediately after, flea.

  The hard drive is 160 GB.  The car had 2 partitions, the recovery partition.  Before reinstalling everything from scratch, I've used Easeus Partition Manager Home Edition to create a 3rd partition to move the original data of C:\ drive to your new partition so my friend can sort files and keep it as he and his family want and discard the rest.  I just copy everything that I can, because I don't know who, what, and where they have stored files.  I actually found a file stored in the recovery partition, but I moved it.

  "Here are some reasons that XP will remove RPs.

  'http://support.microsoft.com/kb/301224 '.

  • Read the KB article.  To make sure that we are on the same page, I get "system drive" means C:\.
  • Lack of free space should not be a problem.  C:\ is 32 GB, 10.1 GB used.  D:\ is 111 GB, GB used 21.2.  E:\ is 5.98 GB, used 5.00.  E: is the recovery Partition.
  • No disk compression
  • Did not display the warnings system restore.
  • I do not turn off System Restore fo any player.
  • This isn't an upgrade of the system to an earlier version, I just turn on the computer the way it came, new out of the box.
  • The system was always restored from the recovery Partition.  I have a set of restore CD, but they have been written about the recorded side with a felt marker.  I have not tried cleaning off the coast, this will be my absolute last resort.   :-)
  • Disk cleanup does not give me tabs and options as mentioned in the article.  I guess that these show upward when you upgrade from a previous version of the operating system.
  • I don't think I'm under low disk space.    :-)
  • Does not not after the age of 90 days, nor have I have reduced the size of the data store.  I didn't know either of these possibilities before you read this KB.  See how the KB has been written, I suppose that these two parameters can be changed.  Can you point me in the right direction for how to do this?  I have a computer multiboot (XP Pro and Vista Ultimate Edition) and I would change the date of age never delete a restore point, because the computer is rarely used nowadays.

  "I don't know that when you install SP3 and it goes well, a single method to uninstall SP3 is to restore the system to the time before SP3 was installed:

  http://support.Microsoft.com/kb/950249

  This would mean that you would still RPs after that installation of SP3 (if things were favorably) and that was my observation. »

  • When I started to have problems, I simply started from scratch with a Destructive Restore process.  When I'm really frustrated after several failures, I started looking for a quicker way to get back to a point just before I installed SP3 and found this KB.  After that, it was the safe boot mode and using the Control Panel Add/Remove programs to remove the SP3.  And I got very, very familiar with the process!   Laughing out loud

  "Other things I can think can remove all restore Points are third party maintenance and system cleaning tools, poorly designed or introducing a third part malfunction anti malware tools, etc..".  Malicious software can disable the system restore (temporarily of course), but I never saw remove Restore Points.  The XP disk cleanup will also delete all but the most recent restore Point. »

  • Other Easeus Partition Manager, I never got far enough along to try any other third party software.  My "modus operandi" is updated completely OS and Internet Explorer before I install any other software and update it.  However, with the idea of the recovery Partition, do not not the software isn't an option.

  "If they are all absent, it always seems that a human element involved somewhere."

  • I learned long ago, the days of 8-bit, unless there is a real hardware failure, almost all computer problems can be tracked to a human being.
  • Not all system restore points were missing, just the first I created which is involved by creating a restore point after you change the system, such as the removal of my friend doesn't use software.  For example the software to connect to an ISP with a modem.  They got the DSL.   :-)
  • All deletions of software would help speed up the computer for his own use.  The rest of the family is like me today, Mac users.   :-)

  "To answer your question:

  The settings default for the accumulation of Restore Points is 12% of the size of the monitored hard drive or 90 days (both values are adjustable of course).  Microsoft seems to draw attention to the way in which the Restore Points "live."   "Then, the oldest Restore Points will start to get deleted to make room for new Restore Points (see also KB950249).

  • 12%, eh?  Is it possible, in fact, I have exceeded this number by 12% by creating too many restore points?  Knowing what I was doing, which seems to be a possiblity says, as restoring all points were never deleted, only the earlier.

  I'll certainly post the info you suggested in the post on the SP3 forum.

  "Do or do not. There is no test. »

  • "Luke, the force is with you." :-)

• Failed to create system restore point, the option is grayed out

  Original title: System Restore point

  I can't manually create a system restore point, the box is grayed out. Also it does list not the previous points to restorew, but the so-called whenever I have use windows update it is to create a.

  Hi mandmmiller,

  1. don't you make changes before the show?

  Try these steps and check the result.
  Step 1: Start Windows backup and Volume shadow copy services
  a. Click Start, type services.msc and press to enter.
  b. in the list of issues, double click Windows backup and Volume shadow copy services.
  c. change the startup type to automatic and click on the Start button.
  d. click ok to apply the changes.

  Step 2: Run SFC (System File Checker) scan to find and repair missing or corrupt system files and check the result. To do this, try the following steps:
  a. visit http://support.microsoft.com/kb/929833
  b. run the scan successfully.
  c. restart the computer so that the changes take effect and check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I want to do a "System Restore" at an earlier date than when I did a "System Restore Point"; How can I realize this "System Restore" to a date that is earlier than the "System Restore Point"?

  I am running a version of Microsoft "Vista." I want to do a "System Restore" to a date earlier than the 'Restore Point System' which is steeped in external memory of my terminal (and apparently in memory of boarding school of the terminal).  The terminal shows only the "System Restore Point" that I had introduced manually; How replace this erroneous 'system Resote Date Point' so that I can get rid of things that I wish were not included in the drive of my terminal?  Specifically, the "Ready Boost" option has ruined my terminal memory drive; That's why I want to get rid of with a "restoration of memory", but there is no other precedents "System Restore" options.

  Hello

  You will be able to perform a system restore to a restore point created or present on the system. If you have no restore point created before the questions, then you will not be able to restore it.

  For more information, see the following articles:

  System restore

  System Restore: frequently asked questions

  If you try to uninstall an application, you can read the following article to uninstall the program.

  You can see the following link to uninstall the screensaver.

  Uninstall a program

  You can also try disabling readyboost and check if it helps.

  Turn ReadyBoost on or off for a storage device

• the configuration of system restore point

  Pls show me how to configure the system restore point in Windows 7

  Create a restore point

  • Click the Start button, then select Control Panel > system and Maintenance > system.
  • In the left pane, select the protection system.
  • Select the System Protection tab, and then click Create.
  • In the System Protection dialog box, type a description, and then select Create.
  Back up and restore your PC - Microsoft

   

  https://support.Microsoft.com/en-us/help/17127/windows- backup -restore

• Re: Remove the XP system restore point

  How can I remove an XP system restore point. In Oct 08 my PC date has been incorrectly defined on Nov 08 and System Restore creates different restore points. Now PC date set Oct 08 what will happen in November? Can I remove restore points?

  I think that you can't remove already created restore points ignore them. If your laptop is set correctly now I recommend you to create your own restore point and you will know which is the right one.

• Missing system restore points

  Take a look at my system restore points, I found that it was not. There is no reason I know for it - system restore has been on, but being created no restore points - I turned it off and then new and now that it will create restore again points.

  Something happened to me I was had been looking at some dodgy sites "make money on the web easily" just out of curiosity. Anyone know of any malicious dishes that destroys the restore points. It would be a sneaky way to stop the removal of spyware.

  Also I noticed some automatic update of Microsoft had just completed installation - would this have deleted restore points? From what I read the auto create restore points updates not remove them.

  Any ideas anyone?

  Hello

  I found this info:

  If there is no free disk space on the monitored system drive or on any of the available non-system drives, System Restore purges restore systematically points in all monitored partitions to free disk space. If the free disk space falls below 50 MB on any monitored partition, System Restore will stop watch and suspend.
  Note: Some users have reported that using the Real Player One has been deleted and restore points. Please check your log to the system event viewer for events to restore the system to a volume error event.

  But these are questions of Microsoft and if you want to learn more about these issues with the tool to restore the system you must check this information from Microsoft site:
  http://www.Microsoft.com/technet/prodtechnol/winxppro/plan/faqsrwxp.mspx

  You will find frequently asked Questions (FAQ) about the system restore in Windows XP.

• How to create a system restore point

  Hello. have a new laptop, and I would like to be able to create system restore points before as I have download things, when I go to the system restore, it asks only if I want to go to one and not how to create one.  Thank you.

  Hello

  Here is a link to a video on How to create a restore point In Windows 7 from Microsoft.

  Always ensure that backups and restore points are not placed in the HP_Recovery partition. It is usually the d: drive.

  Best regards
  ERICO

• How would remove old XP system restore points?

  I would like to delete the old system restore points (there should be several) on a Windows XP home edition, 32-bit, Service Pack 3.

  It is one way.

  -Disk Cleanup Launch the disk cleanup tool, and then select the options tab. On this tab, you will find a section for the restoration of the system. If you press the button Clean Up for this article, Windows will delete all except the most recent restore points.

  HTH

  > WT

• Windows Xp Sp3 System Restore Points in the process of disappearance

  Without warning my system restore points are missing.

  I checked all the obvious reasons (lack of disk space, etc.)

  I can always put a manually restore point, but when I do it disappears the next time and I'm back to a restore point

  Anyone in the community saw this behavior before?

  Y at - it a known solution?

  I need my system restore to function properly as over the years, I've resorted to using it on more than one occasion

  Any help would be appreciated

  Keith

  I just got the 'volume' down on my percentage for RPs to 200 MB space and he killed all of them except the last RP.

  Then (although SR was always open) I did a new PR and there were two in the calendar.  Then I did another and there were three...

  Then I closed SR and began again and only the last one (number 3) was still there and the other two had been killed.

  Did you present your cursor percentage of volume, right?  If this isn't the case, you should at least try.

• How to restore a significant update to Windows 7 I lost after a restart for an earlier version of the system restore point?

  I am running Windows 7 64-bit Service Pack 1 on a desktop HP Pavilion Elite HPE-350 t. Recently, a malfunction of Windows at startup caused my father reboot the system to a previous system restore point. (He says it was one of several options at startup.) Everything seems to work fine now except that I seem to have lost a critical update Windows downloaded after the restore point, Windows Update Agent 7.6.7600.256. Still, there are in my Windows update history and is listed as "installed successfully", but when I check my updates installed, it is absent. Also, when I try to search for updates installed, I get a message indicating that Windows is up-to-date. I can't uninstall the update and re - install because it is missing from my list of installed updates. So I guess that the re-start to a previous system restore point has put this important WIndows update in limbo. How can ensure me that this update is installed correctly and working properly?

  Hello hakimbenzakis,

  Absolutely, because based on that you are running the latest version of the Windows Update Agent and have the last update to it.

• Is it possible to defragment AND keep the system restore points to lose in Win XP?

  Sometimes my system restore points disappear and I have learned to rely on them.  I heard that defragmentation can erase the system - something to do with the Windows shadow copy service restore points.  Is there a safe way to defragment a hard drive (internal or external) WITHOUT losing any system restore points: both those created manually as well as automatically created? I have a lot of disk space and all criticalWindows updates. No malware. CHKDSK not display any errors.

  Joel-

  I really thank you goes out all the time and difficulties that you have not only to explain my problem but at the arrive at a solution that has worked for you.  I already read the CNET critical user of and download Ultimate Defrag, but have not yet installed it because I have a few questions that may be critical to my getting the same wonderful performance you met.  Not wanting to - by my own ignorance - replace one problem with another, can I ask if you know where I can find these answers? :

  (1) my PC has 1 G of RAM an and a Pentium 4 processor, a desktop Dell 8 years.  Have I not enough resources for the programme of work?

  (2) I have two internal HDs - a bunch of 80 G and 40 G Data - with a 1 t external for backups.  Will I be possible to defragment one at a time so that a period of 8 hours at night will give the app some time to run and complete - especially the first time I use it on every HD?

  (3) a review mentions a setting from the default installation for those who have my knowledge minimum tech. Is it choose a wise move in my case? I only will give non-essential options or options I'd understand even when doing this?

  (4) I need to turn off WinPatrol (Start Menu Manager) and install my Avast AV in addition to all the normal precautions for cleaning?

  (5) should I disconnect from the internet before installing (I have a shortcut on the desktop that allows me to turn off my DSL modem)?

  (6) can the program itself or its installer to run in Mode safe and which is preferred? Of course, I would create a prior restore point I have restart mode without failure.

  (7) a critic says that the 50-page help document is of no use to someone with my limited knowledge. Is there a training video or another type of help?

  If I have already imposed on you enough, perhaps some other experienced users could help answer the above?

  Thanks again!

• How to save files on a CD system restore point?

  How to record the system restore point/data files to the remote storage device. for example, CD? Why... I need to run ID or remove malicious software programs on PC. To completely clean, I need to disable System Restore which will remove all the old system restore points. I want malware recovery option, if necessary, in my opinion.  Ask also procedure - how to restore the files to restore the system from the CD for PC?   For a multitude of reasons, I don't want to go through the hassle of the old image restore, reinstall windows XP, etc. to "work around" malware / problems of virus, or remuneration mcafee $90 to 'fix' my PC for 5 days.

  Sorry, but you can't do that. Instead, you can picture the system with a program like Acronis True Image Home and save this image on an external hard drive. After getting the system cleaned (or if you decide to do a clean install), you can use True Image to make an image of your own system and also imagery incremental backup for your restore image is always up to date.

  BTW, I do not recommend disable the system restore first during the cleaning of a machine. Leave it on and then turn it off then clear on the old Restore Points, turning it back on.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  MS - MVP - Elephant Boy computers - don't panic!

• Cannot open program (0 x 80070057 erro) system restore point - details below

  Hi people. I open the program of system restore point can´t, it displays the folow error message: unexpected error. incorrect setting. 0 x 80070057. the restoration of the system will be closed. (or something like that). Someone knows how to fix this? What happened, I have never had any problems with my windows vista before. Very thanks! Pedro Pacheco of the Brazil (and sorry for my bad English)

  There may be several reasons for the restoration of the system do not have to work.

  1. If you are using Norton, disable it before using the system restore.
  Norton will interfere with system restore.

  2. try to use Safe Mode system restore:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3. malware stops at a system restore.
  Try a scan of your system:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  http://www.Spybot.info/en/index.html

  Spybot Search & Destroy 1.6.2 is a very good Anti-Spyware FREE program.

  Download, install, update and immunize your system with it.

  Then ANALYZE with her.

  Update and scan your system once a fortnight

  See you soon.

  Mick Murphy - Microsoft partner

• No System Restore Point, then how to return to a system update before?

  Windows has completed an update and my task bar is back to an older version, changed color and left me with an old start button (grr!), more my Sidebar is now completely opaque, whereas previously it was translucent. For some reason, there is no system restore point to go back to a system update before, and I am not allowed to create a system for yesterday restore point, so, how do I fix these errors?  Obviously these defects are not affecting performance, but given that I'm a bit OCD, they cause some irritation. : O

  Thanks in advance for any help that is to come.

  You need not return to the update to fix that. With the right button of your wallpaper, just go to customize and choose any theme Aero.  Aero is the brand name for the DWM (Desktop Window Manager) technology that powers all the effects of glass and styles.

• All my system restore points are gone, can I get them back? They were here before, I did a restore earlier in the day.

  I have read through many of the issues with my problem similar but found no answers I thought applied to my question.  I use Vista Home Basic and it came on laptop. He began to get a blue screen, the other week that close... I signed on and it allows me to open my Cricket to go online and allows me to open IE and go online - I was for a few hours.  With all the previous still running I went to open AOL and the blue screen appeared again. I started to play and it seems that AOL is the reason.  System Restore fixed.  I could sign and use Cricket, IE and even AOL.  A few weeks later now I am online using IE and I had saved a few sites to my bookmark on the google toolbar.  I kept all the programs like I always do and clicked on AOL and of course, a blue screen and shut down.  I thought I'd make system restore as before... He's fine, but I noticed that when I went to IE my google toolbar was gone and I have several sites needed bookmarks so I played with the tools and disabled my toolbar and it permits etc. nothing helped so I defeated the system restore and signed for IE and google toolbar is back to normal but now AOL is causing the blue screen new.  I decided to try, then uninstall the google toolbar and simply re-install everything when I do a restore to get AOL works or to uninstall AOL and reinstall it again. I opened the system restore and that's when it opened and said there are no restore points on my system and take care to create a manual.  I'm afraid that if I do just that I lose the ability to restore my restore points, if there is a way (which means yes, you can restore the system restore points, but you must do before anything else, as if I created an it would ruin my chance to restore my 'old'?).  In any case, of course, I must have the computer checked as to why the blue screen is arise every few weeks but so far here, I want to do system restore to fix at the moment.  What can I do to get my restore points back?  Thanks in advance!

  Hi Diana,

  Thank you for answering... that's why I'm confused, I know not that restore points deleted as space fills up and also if you turn off your protection system but neither one of these grounds was the case.  I had a lot of space (from the previous use of sys restore, I see how many restore points can accumulate before deletion and it was not nearly that many) and protection of my system is on?  It just happened without reason that's why I was hoping that I could get back them due to abnormal circumstances.  I do not!  I have uninstall AOL completely and when I reinstalled it everything went well up to what he did and he opened up to find my connection type and of course, the blue screen appeared and stop.  Obviously, AOL, but I thought that a new facility would set as I had AOL since I was the new laptop.  I thought that maybe a file was corrupted or something and uninstall and reinstall would work but no luck.  I was going to do a complete reinstallation of my laptop all but before I do, I noticed I never had disks when I bought it, everything was installed (Windows Vista), but they do not include a disc of resettlement.  I don't know if this is how they do it now, or if mine was incomplete, so I guess I'll put hands on MS supports.  Thanks again!

  Hey CinnaBlaze

  you do not have a vista dvd to your computer preinstalled vista laptop has nothing to do with microsoft

  ask the manufacturer of the laptop or send a set of vista recovery discs and also ask them if you have a recovery partition on your hard drive of everything put to the standards of the plant and how to access a partition recovery with a certain combination of keys to start the process

  Walter, the time zone traveller