System Windows Thread Unhandled Exception (no file name) 8.1

Similar Questions

• Restart causes the 'system thread unhandled exception '.

  Freezes in Windows 8.  Restart causes the 'system thread unhandled exception '. Windows restores successfully to earlier restore point start, but the questions is recurring.

  3 crashes so far because the computer was purchased at the end of February, 2014.

  All 3 minidumps are available at:

  https://onedrive.live.com/redir?RESID=7B6D641161EAE33%211120

  This disturbs my work whenever I need to reactivate my license of office until I can get back to where I was.

  How can I avoid this problem happen again and still be able to fully use my computer?

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
  It is a very common bugcheck.  Usually the PIN address of exception
  the driver/function that caused the problem.  Always note this address
  and the date of the picture link / driver that contains this address.
  Some common problems are the exception code 0 x 80000003.  This means a hard
  coded breakpoint or assertion was hit, but this system has been started
  / /NODEBUG.  It is not supposed to happen as developers should never have
  breakpoints coded hard in retail code, but...
  In this case, make sure a debugger must be connected and the
  system startup/DEBUG.  This will we will see why this breakpoint is
  happening.
  Arguments:
  Arg1: ffffffffc0000005, unhandled exception code
  Arg2: 0000000000000000, the address that the exception occurred at
  Arg3: fffff880031a2938, address of Exception report
  Arg4: fffff880031a2170, address of the context record

  USTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  Nom_processus: System

  CURRENT_IRQL: 0

  Error_code: (NTSTATUS) 0xc0000005 - the instruction at 0 x % lx 08 referenced memory at 0 x % 08 lx. The

  memory could not be %s.

  EXCEPTION_PARAMETER1: 0000000000000008

  EXCEPTION_PARAMETER2: 0000000000000000

  WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800d4fd3168
  Unable to get nt! MmPoolCodeStart
  Unable to get nt! MmPoolCodeEnd
  0000000000000000

  FOLLOWUP_IP:
  nvkflt + 37 c 2
  fffff880'03e187c2?              ???

  FAILED_INSTRUCTION_ADDRESS:
  + 37 c 2
  00000000'00000000?              ???

  STACK_TEXT:
  fffff880 '031a2b78 fffff880' 03e187c2: fffffa80'0d67d950 fffff880 '031a2e00 fffffa80' 0d67d950

  00000000'00230047: 0 x 0
  fffff880 '031a2b80 fffffa80' 0d67d950: fffff880 '031a2e00 fffffa80' 0d67d950 00000000'00230047

  00000000' 00000000: nvkflt + 0x37c2
  fffff880 '031a2b88 fffff880' 031a2e00: fffffa80'0d67d950 00000000'00230047 00000000'00000000

  00000000 00000001': 0xfffffa80'0d67d950
  fffff880 '031a2b90 fffffa80' 0d67d950: 00000000'00230047 00000000'00000000 00000000'00000001

  00000000' 00000000: 0xfffff880'031a2e00
  fffff880 '031a2b98 00000000' 00230047: 00000000'00000000 00000000'00000001 00000000'00000000

  fffff8a0'05c3b700: 0xfffffa80'0d67d950
  fffff880 '031a2ba0 00000000' 00000000: 00000000'00000001 00000000'00000000 fffff8a0'05c3b700

  fffff880'031a2c78: 0 x 230047

  nvkflt.sys

  Driver Description: Filter driver NVIDIA Graphics

  Driver update site: http://www.nvidia.com/Download/index.aspx

  Make sure all your display drivers are updated and if this does not work, uninstall and perform a clean installation.

  Guide on how to install the NVIDIA Windows 7/Windows Vista display driver (even in windows 8)

  http://NVIDIA.custhelp.com/app/answers/detail/A_ID/2900/~/guide-on-how-to-install-the-NVIDIA-display-driver-under-Windows-7%2Fwindows-Vista

  Good luck

• The browser Safari windows:-export Japanese character of file name are not displayed

  I am facing a problem on windows 7 safari browser.

  When I export the pdf file, the Japanese characters in the file name are not displayed.

  Hello

  Apple did not support Safari for Windows for years is not surprising that you have problems.

  Use Chrome or Firefox.

• How do you keep Windows automatically passing the entire file name when editing?

  When I copy a file to a folder and rename the file, that I right click once on the file name to select it and again to place the cursor where I want to change the name in the name of the original file.  However, until I'm able to start typing the computer automatically highlights the entire file name, so that when I start typing deletes the original file name and replace it with what I typed.  Is there a way to avoid this and allow me to change the name of original rather than delete it and start from scratch?

  If I press ESC to restore the original name and follow the same steps again, that it allows me to change the name of the original file as you wish.  That is to say, I see only this product the first time I try to change the file name.

  After he highlights the entire name, press any cursor movement: home, end, left arrow, right arrow key.  Who will be development of the United Nations name and allow you to move the cursor in the right place to start to edit. Boulder computer Maven
  Most Microsoft Valuable Professional

• Windows search 7: beach of file names

  Is there a way to find Windows Explorer to search for a range of files?  For example the images from 1 to 99 IMG0001-IMG0099.

  Thanks in advance.

  You can type this as a search term:

  IMG00? and it will find only files that start with the letters IMG00 and then followed by two additional characters (regardless of whether they are, from 01 to 99). Question marks are strict wildcards.

  You can also simply use IMG * to find any file that begins with the letters IMG, then maybe do not have anything after that either.  It is a generic character of openness.

• Is there a way to keep InDesign CC2015 export or save as window to pre-fill a file name?

  I know the obvious answer is to simply delete the pre-filled text, but I was instructed to reach a solution to keep this empty window, to avoid errors. We are on 10.11.5.

  Any comments would be greatly appreciated.

  Thank you

  There is no native way to do this. You could try the script forum to see if anyone can script a solution for you.

• crashing: unhandled exceptions in thread system atikmadg.sys

  Hello!

  Brand new laptop brand (2 weeks) keeps crashing.

  Smiley blue screen tells me the following error, and that he will return to market - which never happens.

  If anyone can point me to a fix for this I would be very happy.  Did some research and found others with the same problem - no solutions.

  system thread unhandled exception atikmadg.sys

  WIN8.1

  AMD a8-7100 r5, calculate the 8 cores

  8g RAM

  64 bit

  has found a solution by contacting the company that made the video card and download of their drivers.  If acer should not have these readily available as part of an update to the new computers?

• Winmail in vista mail export then problem of file name different when imported into windows live mail?

  win mail in export Vista mail then face the different file name problem when importing into windows live mail?

  I have dell laptop and vista 32 - bit os worm and now I change my laptop and have os windows 7, but when I export the name of folder windows vista mail rename (long file name) so when I import in windows 7 in the windows live mail client it is not imported as well as in win mail. folder and sub-folder is not in good
  the path folder and subfolder and subfolder; s subfolder is not to this strucherd only in win mail in vista. so, how to solvedthis problem and I want to win software mail in windows vista then where to download in windows 7. PS please help me I have the database of records of mamy creat inside.

  Hi ChintanThakkar,

  Since you are facing problems with its import to Windows Live mail, you can publish your application in the Windows Live Forum for assistance.

  Windows Live Support

  http://windowslivehelp.com/solution.aspx?SolutionID=0f26bfb0-7799-46a9-A969-dfc8186110f7

  Hope this information is useful.

• Query related looking for an invalid file name or a folder after scanning with shield system

  Original title: how to find a folder or a filename not valid?

  I my says Iolo System Shield 4 cases of invalid file names or records, but does not show me where they are.  How can I find them so I can delete them?  I'm afraid that they might cause my computer to break and restart all of a sudden.  Thank you!

  Hello

  You need Contact Lolo support for assistance.

  http://support.iolo.com/ICS/support/splash.asp

  Hope this information helps.

• Assistant Contact sheet print file names display problem

  In Windows XP, I could select a group of images and print a Board-contact via the Photo Printing Wizard.  File names were centered under the picture and WRAPPED when the name of the file has been long.

  In Windows Vista, it works, EXCEPT that file names are centered and TRUNCATED.  This isn't the desired behavior.  Y at - there a fix, or workaround or alternative solution?  (In addition to copying the files back to a XP machine?)

  Thanks in advance!
  BarbaraC Barbara Crane

  Hello BarbaraC,

  Try the following link to see if it will display full of names of files without truncating them.  I don't think that the result you're looking for in Vista is possible.  Everything I read indicates that Microsoft truncates file names to get under the tile.

  http://www.photo-freeware.NET/contact-sheets.php

  See you soon

• Message from Samsung SF - 371P printer - Enter Output File Name

  Against all odds, my printer Samsung SF - 371P do not print and when you are prompted to do so, active a small window in which the "output file name" must be entered. Can you explain what this means and how the problem can be solved. My computer has a new Windows 7 system.

  Greetings - Doug Welsh
   
  From Internet Explorer
  Original title: name of the output file

  Hi Doug Welsh,.

  You can read these articles and check if that helps.

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  Solve printer problems: http://windows.microsoft.com/en-us/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Why can I not print? : http://windows.microsoft.com/en-us/windows7/why-cant-i-print

  Thank you.

• Problems with the "use tiny file names...". "checkbox in the settings of WebHelp box

  Given that the RH 9 is only able to run on Windows, the checkbox "Use tiny file names..." ' (see image below) can cause some unexpected problems when generating output for a unix (or linux) platform. I found this recently when generating output of web for a project that is visualized on a linux platform machine and met hundreds of broken links unexpected help.

  

  If this is the first time you generate your project output, this function works very well - it converts all topics, image files and all what it takes to display help, lower case. However, if for some reason, you had generated previous outputs without this box, and now you have decided that you want all your files output in lower case, just check this box and regenerating the output will not work.

  The reason is simple - the Windows operating system does not distinguish between upper and lower case in file names (e.g., fichier.htm name is the same as the FILE name.) (HTM). UNIX (and linux) are case-sensitive and treat these files are two separate files. Therefore, HR fact not (cannot) change existing file in your folder names with this checked out and gives no message indicating such when generating the output. In this case, the only way to solve this problem is to delete the folder containing your output files and have HR to regenerate your project from scratch.

  I had an additional problem which has made things even worse. In a project for a linux platform, I have unchecked the box during the creation of project by accident (perhaps over a period of days or weeks). Then, due to another problem, I had to restore my project at an earlier stage. At this point, I discovered that my necessary help links of the files using lowercase and uppercase the filenames for all work very well.

  I've seen no mention of this in the HR documentation, so I thought that I must draw the attention of the HR community.

  Yes - just to clarify, I'm taking everything I publish on.

  Reminder - just those who publish in a Unix/Linux warning environment if you need to change the case of file names in your folder you post on and you already have stuff in there with the same name, you will need to delete the files first before you republish.

• Insert "illegal" characters in file name for label printing?

  Hey all (Happy New Year)

  I actually see people here who have helped me with this there is responsible for so many years (Hello 'x'). Sort of, I use this .js file for annotate aerial images before printing, and I know just enough about scripts to make changes to the basic layout as the need arises - so far. A new retentive mgr rather anal don't like the replacements I did for some "illegal" characters that windows does not allow in file names. For example, the file name used for the annotation is:

  001 0003 1in = 660ft CFL 154_074 01-01014 503 - 013.tif

  But Mr. Bishop love not in, the ft and the use of the _ instead of a period (.), so what I need is a change that goes something like (and note that I DO NOT code, so stop laughing).

  "Find and replace by", find ft and replace by "and search for _ and replace by," so the final annotation written in the image is: ""

  001 0003 1 "= 660' CFL 154,074 01-01014 503 - 013.tif"

  My current .js is lower, I'd appreciate any help. Thank you! TLL

  ------------

  CREATE NEW CANVAS W/SPACE ON TOP

  var deltaW = 0; Add a "n" pixels to the width

  deltaH var = 150; Add "n" pixels to the height

  var anchor = AnchorPosition.BOTTOMCENTER; anchor point to resize canvas

  SET the FONT TYPE AND SIZE - use GetFontName.js to get the exact name

  fontName = 'ArialMT '; var

  var fontSize = 18;

  Check if a document is open

  If (documents.length > 0) {}

  var originalRulerUnits = preferences.rulerUnits;

  preferences.rulerUnits = Units.PIXELS;

  try {}

  var docRef = activeDocument;

  docRef.resizeCanvas (docRef.width + deltaW, docRef.height + deltaH, anchor);

  Create a layer of text on the front

  var myLayerRef = docRef.artLayers.add ();

  myLayerRef.kind = LayerKind.TEXT;

  myLayerRef.name = "Filename";

  var myTextRef = myLayerRef.textItem;

  ADD the FILE EXTENSION, change the n y below

  var ShowExtension = "n";

  myTextRef.size = fontSize;

  myTextRef.font = fontName;

  COLOR of the TEXT PUT in RGB values

  newColor var = new SolidColor();

  newColor.rgb.red = 0;

  newColor.rgb.green = 0;

  newColor.rgb.blue = 0;

  myTextRef.color = newColor;

  SET TEXT POSITION - PIXELS left first, then the top.

  myTextRef.position = new Array (30 110);

  Set the blending Mode of the text layer. The name must be in UPPERCASE

  That is to say NORMAL change to the DIFFERENCE.

  myLayerRef.blendMode = BlendMode.NORMAL;

  Select opacity in percent

  myLayerRef.opacity = 100;

  The following code deletes the extension and wrote tha text layer.

  fname = filename only

  Use the extension if the value

  If (ShowExtension == 'y') {}

  fname = docRef.name;

  } else {}

  di = (DocRef.Name). IndexOf(".");

  fname = (docRef.name) .substr (0, di);

  }

  myTextRef.contents = fname;

  docRef.flatten ("n");

  } catch (e) {}

  An error has occurred. Restore units of the rule, and then spread the error return

  to the user

  preferences.rulerUnits = originalRulerUnits;

  throw e;

  }

  Everything went well. Restore units of the rule

  preferences.rulerUnits = originalRulerUnits;

  } else {}

  Alert ("you must have a document open to add the file name! ');

  }

  Here is the replacement code:

  The following code deletes the extension and wrote tha text layer.
  fname = filename only
                 
  fname = docRef.name;
  fname = fname.replace(/in/, ' "') .replace (/ pi /, ' '"); "

  remove the extension if needed
  If (ShowExtension! = 'y') {}
  fname = fname.match (/ [^.] + /) [0];
  }

  fname = fname.replace (/ _ /, '.');

  myTextRef.contents = fname;

  I sent the entire file by PM. This should work if there aren't any typos.

• "Name of file or assembly ' System.Windows.Forms, Version = 2.0.0.0, Culture = neutral, PublicKeyToken = B77A5C561934E089", or one of its dependencies was not found

  Hello

  Im having a problem. I write a program in Visual studio 2008 c# for Windows CE language in a machine of liliput.

  When I run the program in windows 7, I have no problem, but when I try to run my program in Windows CE I get the following exception (the projecto for Windows CE was created to run in this operating system):

  MissingMethodException is unmanaged

  "Name of file or assembly ' System.Windows.Forms, Version = 2.0.0.0, Culture = neutral, PublicKeyToken = B77A5C561934E089", or one of its dependencies was not found.

  The references from my program are:

  mscorlib.dll (Version 2.0.0.0) (length versio 2.0.0.0) - this dll do not exist in the program for Windows 7, appeared when I created the project for windows CE

  NationalInstruments.Vision.dll (Version 11.0.35.102)

  NationInstruments.Vision.Common.dll (Version 11.0.35.102)

  System.dll (Version 2.0.0.0)

  System.Data.dll (Version 2.0.0.0)

  System.Deployment.dll (Version 2.0.0.0)

  (Version 2.0.0.0)-System.Drawing.dll

  System.Windows.Forms.dll (Version 2.0.0.0)

  System.XML.dll (Verision 2.0.0.0)

  Throughout this reference is the Version of the Runtime: v2.0.50727 (it is the versions of Windows CE of liliput machine can run?)

  Can someone help me? I don't know why I get this exception

  Thank you for your help

  Hello UH and thank you for your message.

  I'm sorry I don't really understand what you are doing, you develop applications with Visual Studio 2008 and then deploy it on Windows CE or use directly in windows THIS? (I ask that, because Visual Studio is not supported on Windows CE: http://www.microsoft.com/en-us/download/details.aspx?id=7940)

  In addition, what device OR do you use? What is the fat of your project?

  Thanks for the responses,

• BSOD "driver irql not less or equal" and the "thread of unhandled exception" messages

  Hi all

  Since I got my laptop motherboard replaced I started having BSOD issues with "driver irql not less or equal ' and"unhandled exception thread"messages. They appear very often (about once a week), but it's annoying anyway :) I failed to note any regular pattern in BSOD problem.

  I've read the description of similar problems, so I guess that the problem is a faulty driver. Unfortunately my PC skills are not sufficiently advanced to solve the problem on my own.

  Operating system

  64-bit Windows 8
  CENTRAL PROCESSING UNIT
  Intel Core i5 3210M @ 2.50 GHz 61 ° C
  Ivy Bridge 22nm technology
  RAM
  6,00 GB Dual-Channel DDR3 @ 665 MHz (9-9-9-24)
  Motherboard
  Acer VA50_HC_CR (U3E1)
  Graphics
  Monitor generic PnP (1366x768@60Hz)
  Graphics Intel HD 4000 (Acer incorporated [ALI])
  Storage
  465 GB TOSHIBA MQ01ABD050 (SATA) 39 ° C
  Optical drives
  HL-DT-ST DVDRAM GT70N
  Audio
  Realtek High Definition Audio

  Antivirus: Kaspersky Crystal

  The Minidump files: https://onedrive.live.com/redir?resid=A32073C9ADCE674! 106 & authkey =! AEZQAT-sNxtbU1Y & ithint = the file % 2crar

  Thanks in advance.

  The debugging session: killed Sep 16 01:29:43.916 2014 (UTC - 04:00)
  System Uptime: 0 days 0:30:20.630
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ............................................................
  Loading user symbols
  Loading unloaded module list
  .......

  Use! analyze - v to obtain detailed debugging information.

  BugCheck D1, {b, 0, 0, fffff88005abf4b6}

  Cannot load the image \SystemRoot\system32\DRIVERS\athw8x.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for athw8x.sys
  ERROR: Module load completed but symbols can be loaded for athw8x.sys
  Probably caused by: athw8x.sys (athw8x + 684b 6 )

  Follow-up: MachineOwner

  Atheros Wireless LAN Driver Update.

  Loaded symbol image file: athw8x.sys
  Image path: \SystemRoot\system32\DRIVERS\athw8x.sys
  Image name: athw8x.sys
  Timestamp: Thu Jul 24 11:44 2012 (500EC2C0)

  First try ACER Support.

  http://us.Acer.com/AC/en/us/content/drivers

  Description of the driver: Atheros Wireless LAN driver

  Driver update site: http://www.Atheros.cz/