systematic finder (not responding) &; finder restart
Hello
I have experienced many problems of finder (not answer) and don't leave me no option to restart the computer with a hard reboot.
also when it works fine if I opt to restart it never restarts the machine unless I do a power down by pressing the power switch until it stops.
can someone help me please
Thank you
What is Symantec Finder? If you run a Symantec software on it Mac you should uninstall it because it can cause many problems.
Tags: Mac OS & System Software
Similar Questions
-
Whenever I try to edit anything to move a clip to the evolution of the duration of a song the Windows movie maker stops working or "restarts". Even adding transistions and effects causes this. Why?
Hello
1. don't you make changes to the computer until the problem occurred?
I suggest you to try the steps below and check if it helps.
Method 1:
Set up your computer in a clean boot state, and check to see if the same problem happens.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Method 2:
Error message when you try to start Windows Movie Maker in Windows Vista: "Movie Maker has stopped working" http://support.microsoft.com/kb/923122
Hope this information is useful.
-
How to end a task that is not responding
How to eliminate a process that is not responding without restarting the computer
Hello
Method 1:
Press Ctrl + Alt + Del and the Task Manager window appears, in the list, click the process you want to end, and then click the end task button at the bottom.Method 2:
You can also right click on the taskbar at the bottom of the screen and choose Task Manager. Follow the steps as described in method 1. -
My keyboard and the touchpad are locked, does not respond to what it is.
My keyboard and the touchpad are locked, do not respond to what it is. I activated the screen keyboard on and it works. It is a G71-340US, Windows 7. I think it happened when the battery died while in a Word doc. computer is turned off. Plugged. Turned, password screen appears, could not type anything in the box. The mouse works. My keyboard and the touchpad are locked, do not respond. Restarted, no help. Pulled the battery, no help. At least I can use the keyboard to the screen! Thanks for your help.
Did a restore of the system and all is well! Went back 3 days of the last update of windows. I hope this helps others!
-
Thunderbird doesn't start and gives this message in a message window
Thunderbird is already running but is not responding. To open a new window, you must close the current Thunderbird process, or restart your system.
Any help would be appreciated.
See:
-
Storm knocked out of power; Restart the Mail "not responding". Now what?
The storm knocked out power. When iMac is restarted, Mail App "did not." Similarly, trying to update Apps on OS X El Capitan, iTunes "is not responding." Face w / endless inaction, force them to leave. try again, force them to leave again. How do I return Mail? How do we install the updates?
If you haven't done so already, please try first this simple step .
-
I installed FF on my new computer, Windows 7 Toshiba, I get the message Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. It is NOT open I have only one computer.
I had a computer scientist to try everything, and we cannot on it to open it.Search the firefox process firefox.exe and kill him with for example the Task Manager. It is also worth watching for the plugincontainer.exe.
The problem and the solutions are explained in the articles:
-
I keep having a problem with this error message. Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I tried everything the internet suggested but it continues to wreak havoc... Help, please... John.I cannot give other details that it has become very annoying
See "hang out":
-
Instances of OHS become restarted and not responding
Hello
We have about 8 instances of OSH on Windows 2008 R2 server installed and configured on these 8 cases webgates. We also OAM SSO for all these applications on these 8 cases. But suddenly SST does not meet all user requests. OHS logs, I see that restarting the server every 2 minutes. Even the static files on OSH server is not responding. I commented also include webgate.conf on server OHS and it helped too much.
This is the error we receive the newspaper to opmn.
[2015 10-19 T 08: 11:51 - 07:00] [opmn] [ERROR: 1] [] [libopmnohs] process Ping failed: ohs8 ~ OHS ~ OHS ~ 1 (13:5052) [connection receive timed out]
[2015 10-19 T 08: 11:51 - 07:00] [opmn] [ERROR: 1] [] [libopmnohs] inaccessible process: ohs8 ~ OHS ~ OHS ~ 1 (13:5052)
[2015 10-19 T 08: 11:51 - 07:00] [opmn] [NOTIFICATION: 1] [663] [pm-process] stop: ohs8 ~ OHS ~ OHS ~ 1 (13:5052)
[2015 10-19 T 08: 12:23 - 07:00] [opmn] [NOTIFICATION: 1] [662] [pm-process] departure: ohs8 ~ OHS ~ OHS ~ 1 (0:13)
[2015 10-19 T 08: 12:33 - 07:00] [opmn] [NOTIFICATION: 1] [665] [pm-process] process living: ohs8 ~ OHS ~ OHS ~ 1 (13:20956)
[2015 10-19 T 08: 13:24 - 07:00] [opmn] [ERROR: 1] [] [libopmnohs] process Ping failed: ohs8 ~ OHS ~ OHS ~ 1 (13:20956) [connection receive timed out]
[2015 10-19 T 08: 14:15 - 07:00] [opmn] [ERROR: 1] [] [libopmnohs] process Ping failed: ohs8 ~ OHS ~ OHS ~ 1 (13:20956) [connection receive timed out]
[2015 10-19 T 08: 15:06 - 07:00] [opmn] [ERROR: 1] [] [libopmnohs] process Ping failed: ohs8 ~ OHS ~ OHS ~ 1 (13:20956) [connection receive timed out]
[2015 10-19 T 08: 15:06 - 07:00] [opmn] [ERROR: 1] [] [libopmnohs] inaccessible process: ohs8 ~ OHS ~ OHS ~ 1 (13:20956)
[2015 10-19 T 08: 15:06 - 07:00] [opmn] [NOTIFICATION: 1] [663] [pm-process] stop: ohs8 ~ OHS ~ OHS ~ 1 (13:20956)
[2015 10-19 T 08: 15:38 - 07:00] [opmn] [NOTIFICATION: 1] [662] [pm-process] departure: ohs8 ~ OHS ~ OHS ~ 1 (0:13)
[2015 10-19 T 08: 15:48 - 07:00] [opmn] [NOTIFICATION: 1] [665] [pm-process] process living: ohs8 ~ OHS ~ OHS ~ 1 (13:14576)
[2015 10-19 T 08: 16:40 - 07:00] [opmn] [ERROR: 1] [] [libopmnohs] process Ping failed: ohs8 ~ OHS ~ OHS ~ 1 (13:14576) [connection receive timed out]
[2015 10-19 T 08: 17:31 - 07:00] [opmn] [ERROR: 1] [] [libopmnohs] process Ping failed: ohs8 ~ OHS ~ OHS ~ 1 (13:14576) [connection receive timed out]
[2015 10-19 T 08: 18:22 - 07:00] [opmn] [ERROR: 1] [] [libopmnohs] process Ping failed: ohs8 ~ OHS ~ OHS ~ 1 (13:14576) [connection receive timed out]
[2015 10-19 T 08: 18:22 - 07:00] [opmn] [ERROR: 1] [] [libopmnohs] inaccessible process: ohs8 ~ OHS ~ OHS ~ 1 (13:14576)
Help, please!
Just made a change to webgate profiles and copied to instances of OSH. This solves the problem.
-
Hi all
I couldn't use the vSphere Client to enter in vCenter (from my office).
I could not Remote Desktop on the server vCenter resides on.
I could go on the console of the server vCenter resides on. I couldn't use vSphere Client from there either.
I tried rebooting vCenter and got this error message:
Unable to stop the VMware VirtualCenter Server Service on Local computer.
Error 1053: The service did not respond initially or control in a timely manner.
Any ideas where to look for more clues or ideas on what might be the case?
Thank you.
I could not Remote Desktop on the server vCenter resides on.
This is not vcenter Server.
Check the configuration of Windows.
Have you tried restarting your vCenter Server system?
André
-
After you apply a systematic update on Windows XP, I started having "not responding" to stop and had to cancel the task through the Task Manager. The error "not responding" moved to the selection of items on a screen and had to cancel via the Task Manager. I applied the updates and that did not fix the problem. The last update was 34.0.5 and FireFox would not start up. I noticed several people also had this same problem with Windows 7 (although my Windows 7 works ok - touch wood).
34.0.5 upward in safe mode but would not come otherwise. I did a Reset and FireFox started with Extensions disabled. The first expansion, I have activated was Norton 2014 Toolbar and FireFox did not come to the top. After application of all available newly INDEPENDENT States fixed, FireFox came upward with the NIS active 2014 and seems to operate normally in the present tense.
Some added addons toolbar and anti-virus are known to cause
Firefox issues. Disable all of them.Start Firefox in Safe Mode {web link}
While you are in safe mode;Type of topic: preferences #advanced< enter > in the address bar.
Under Advanced, select General.
Find and stop using hardware acceleration.Search web sites secure. Are there problems?
Then restart.
-
Flash slows down FF hangs with message "not responding".
Shockwave flash is causing crashes giving the message 'firefox is not responding' and slows down my internet experience. I know it's the add-on flash because when I disable it, firefox works much better. I tried all the suggestions concerning problems of flash on this site and nothing worked. I am running win 7 64 bit (Home premium). In addition, Firefox 36.0.1. All the drivers seem to be aware, but I'll check.
My question is... is it possible to easily disable/enable flash without going into the Add-ons Manager? According to what I'm doing, I'm in crashes and Add-ons for him Manager allow either when I need it or disable it when firefox is slow.
I've gotten to the point where I just open add-on Manager in a tab and the leave it open because I know I'll probably be in there turn flash on or off depending on the way in which its make my machine.
Also, I tried flash running in mode 'request to activate', but you must reload the page so that it can find the add-on.
This problem has been ongoing for a few months now; Performance of Firefox was so much better, but this problem does not appear to be resolved. I love firefox, I really want to go to a different browser.
Thank you
DukePlease ignore the above answer!
One of the reasons frequent slow script errors are the feature of mode of the Flash player plugin. The Protected Mode feature has safety benefits, but there seem to be some compatibility issues on some systems. You can turn it off by creating or modifying a parameter file. The following/post pages which provide different approaches:
- Adobe technical support under the heading of 'Last resort' article: Adobe Forums: how to fix protected Flash Player for Firefox mode?
- Batch file to automate the manual steps: https://support.mozilla.org/questions/982093#answer-518078 (alternative version of file batch of Carm with some modifications by me: https://onedrive.live.com/?cid=f7d304d92388737d & id = F7D304D9238...)
To download the Flash completely (closing and restarting Firefox could help) until it takes effect.
Any improvement?
-
Does not respond when deleting the Messages caused by ginormous basket
After a clean install on Windows 8.1, Thunderbird sometimes says "Not responding" after trying to delete e-mails. After a few minutes, he responds, removes the e-mail message, and life is good. This happens not all the time, but often enough to ask why this happens. Y at - it an incompatibility with Windows 8.1? I find it extremely odd that happen all the time, and that it is in fact instead of crashing.
Re: I didn't plan on messing with Safe Mode, because it is usually have to disable something within the system so that it can work.
Is a debugging feature and it is simple and fast, but it offers very specific information that can be used to identify problems or refute these questions.
Test Windows 8.1
http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode
Choose to start in "Safe Mode with network.
If Thunderbird works ok, then there is a problem with an external program that does not work in Windows safe mode.If no there is always a problem
Test Thunderbird safe mode:
In thunderbird:
'Help' > 'restart with disabled addons.
If the problem goes away then the question is an addon.Other reasons for a temporary delay in any process could be for example: regular background updates or Thunderbird opening / the use of files large mbox among the many possibilities.
Here is a link that you could use to help identify what is the cause or deny what does not, cause the issue. -
When starting FF program (shows not responding is not in the title) stall for 10 seconds, then continues.
Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.
(If you use it, switch to the default theme).
- Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
- On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
- Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
- Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.
Once you get the pop-up, simply select "" boot mode safe. "
If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
When find you what is causing your problems, please let us know. It might help others who have the same problem.
Thank you.
-
Now, he opens with "not responding". I can open it in safe mode but nothing works. The button "restore" & "start new session" does not work. It does not connect to any web site. I had a lot of tabs open when it crashed. There is no crash report (latest is 6 weeks ago).
If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.
- Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
- Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')
See also:
- http://KB.mozillazine.org/Error_loading_websites
- https://support.Mozilla.com/kb/error+loading+Web+sites
Create a new profile as a test to see if your profile is the source of the problems.
See "basic troubleshooting: a new profile:
There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.
If this new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.
See:
-
Firefox does not open. I get firefox is already running but not responding no window... I tried to restart without help. I tried to put an end to the process via Ctrl + Shift + Esc and nothing firefox is registered to complete. I tried to find the application via the icon data run in the start window, I have no icon running on this system (Acer with windows vista (?)
This has happened
Each time Firefox opened
The computer was hard to close and made an incorrect scan stop when it has restarted
User Agent
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; FunWebProducts; GTB6.5; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729)
Uninstall and re - install Firefox does not affect your personal data and settings in your Firefox profile folder, unless specifically, you select this option when Firefox un0installing - but which removes "all your personal data and customizations.
Have you tried to create a new profile after a cold start?
http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
Maybe you are looking for
-
How to get rid of add-on compatibility check window initially to the top of the browser
I have no further details
-
I have uninstalled version 8 and tried to revert to a previous version, but the browser still not open.
-
Keyboard does not work on my laptop Satellite
When I press some of the buttons on the keyboard, the button next to them is enabled. for example, I press a button and it turns on the caps lock. This happens to the other buttons as well.What is the cause? How should I do?
-
Where is the Hp company, why they don't give us a Drivrs for our laptop, our work on the windows 2008 R2 server. What we will do in this case, where Hp Companyyyyyyyyy!
-
Choose what data to track in real time
Hello, I was wondering if anyone knows how or if there is a Subvi so you can alternate between what data will go on a waveform graph, while the program is running. I have three forces entered in table of vs. time waveform. I can see everything on the