T42 can't see hard drive

Similar Questions

• Re: Equium A200-1VO - Windows XP can't see hard drive

  I just replaced the hard drive on my toshiba satellite A200-1VO and trying to load XP but I get a message saying there is no hard drive.
  Can someone help me?

  Hello

  Have you used the SATA HDD?
  A200 series supports the SATA controller and you need SATA HDD (not the IDE).

  In addition the SATA HDD needs SATA drivers. Win XP does not provide such driver, and therefore you must include this.

  Search here in the forum A200 SATA drivers to get more details and info.

  Good luck

• 2000-2b09WM HP: flashed the BIOS and now cannot see hard drives.

  I was trying to install Win7-64 on this 200-2b09WM. I flashed the bios, and now BIOS can even see hard drives.

  I used the 67259.exe softpaq file

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67259.exe

  Any ideas on how to solve this problem because I can not install andy BONE and can not boot from floppy, cause there's not?

  Have you tried to boot with the Windows disk since the last error? If this laptop comes with Windows 8, it can have Secure Boot enabled to avoid booting from cd/dvd. Check the BIOS.

• my laptop is dying, I can move my hard drive to another computer and still use vista coa?

  my laptop is dying, I can move my hard drive to another computer and still use vista coa?

  Hello

  It depends on the type of license you have, as to whether you can transfer it or not.

  Pre-installed Licenses OEM (HP, Acer, etc.) and the Microsoft System Builder OEM licenses are tied to the first machine that they are installed on and channels of license when this machine dies.

  OEM licenses are not transferable.

  If you have purchased your own license for sale retail of Windows and installed yourself, yes you can transfer it to another computer.

  Retail licenses are transferable.

  Just be sure that you have only installed on one machine at a time.

  A single license means one Installation.

  And if it is retail and transfer you, in all likelihood will have to reinstall the operating system, as this disc hard the 'old' aura card mother drivers installed, which will cause starting problems.

  See you soon.

• How can I see external drives on the sierra?

  How can I see external drives in sierra?

  Menu Finder Preferences... > General

• You can add a hard drive internal on the new 2015 macbook pro

  I would like to know if I can add a hard drive of my macbook pro 15 inch (2015), because I would use the fusion on my hdd and ssd?

  N ° the MBP 15 "has no room for a standard internal drive.

• Can I change hard drive with an SSD in Toshiba NB100?

  Can I change hard drive with an SSD in Toshiba NB100?
  The hard drive in this model is the same size as SSD 2.5 drive "?

  Hello

  As far as I know the laptop supports the disk HARD 2.5 SATA.
  I think you could use a SATA SSD drive. Usually some SSDS require the firmware update but this should be provided by the manufacturers of SSD drives.

• can 2nd hand hard drive, I put vista on it?

  Hi all

  First is the hard drive (Vista) on my wifes laptop packed in so I managed to find a 2nd disc from the hand of the same type that had vista on it too, but it has been cleaned. I have the recovery for the old disk cd hard and im wondering can I put vista on the laptop with the 2nd disc of hand and work there cause it have the product key for this. Make sence?

  You can replace the hard drive of the computer and reinstall Vista. You can't have an install licensed so if the old hard drive still works, you need to remove Vista from it (if the old drive is broken it's OK).

  Insert the recovery disk, and then restart the computer and boot from the drive to start the installation process. If the computer does not start from the disc:

  BIOS - how to enter the BIOS and change Boot Order To Boot from CD/DVD

  The computer might need to be set to boot from the DVD drive.

  Each computer is different, when you turn on the computer, it should tell you what button to push to get into the BIOS. It is usually one of the following options and you have to push it in the first 5 seconds:

  F1 F2 F10 F12 ESC LED

  Once in the BIOS find the menu with the boot sequence and change it if it starts from the CD/DVD drive first. Each computer is a little different for this process as well, so I can't give exact directions.

  If your BIOS settings are correct and if you have a DVD player, when the computer restarts if there is a message "press any key to boot from the disk", you press a key on the keyboard to boot from the DVD.

• HPE h8 - 1360t: the HPE h8 - 1360t can support 2 hard drives of 4 GB

  Hello

  the HPE h8 - 1360t can support 2 hard drives of 4 GB

  Intel Core i7-3770 CPU @ 3.40 GHz

  Product number: B4J27AV #ABA

  Motherboard

  System Board

  Manufacturer PEGATRON CORPORATION

  Product 2AD5

  Chipset Intel PCH Z75

  BIOS

  Seller FRIEND

  Release Date 02/07/2012

  7.15 BIOS Version string

  ROM Size 8.00 MB

  SMBIOS

  Version 2.7

  Currently, I have installed as primary

  Hard drive - WDC WD4001FAEX-00MJRA0

  Supplier from Western Digital

  Model number WDC WD4001FAEX-00MJRA0

  Marketed size 4 TB

  Thanks for all help

  applogies for the late reply.

  everything worked very well

  Thank you very much for your help and support

  Have a nice day

• How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?

  How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?  I have already reinstalled Windows 7 from the CD, but that has not solved my problems.  When I put the factory CD in my CD player, it won't always boot from the CD.  When I put my Windows 7 Ultimate CD in the CD drive, it doesn't always start from the CD.         I realize that the reformatting is not always necessary, but I caught a few viruses (despite anti-virus running) and I need to start with a clean hard drive.

  On Friday, January 9, 2015 14:30:32 + 0000, BlueKodak wrote:

  How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?  I have already reinstalled Windows 7 from the CD, but that has not solved my problems.  When I put the factory CD in my CD player, it won't always boot from the CD.  When I put my Windows 7 Ultimate CD in the CD drive, it doesn't always start from the CD.

  You must go into the BIOS and change the boot on CD order
  first push.

  How to get into your BIOS? It is not dependent on Windows, but on what he
  motherboard/BIOS card that you have. In fact, you need access to the
  BIOS before Windows begins to start. A common method is to press
  the key delete when you turn on first, but this is not necessarily true
  for your computer. Watch the display carefully when you start first;
  There is often a message here to tell you what to do. If this is not the case, check
  your system documentation or check with your provider.

• Can not see the drive letter for Hammer 640 GB external hard drive

  I have an external hammer 640 GB drive (which has a Western Digital WD6400AAKS drive inside) with important data. When I connect to my computer (under Windows XP Pro), I can see the player if I go to my computer-> hardware-> readers but can see any drive letter.

  Even if boot disks using software such as Hirens boot and demarrer start with the BACK, do not see this drive (I tried A - Z).

  There is apparently no physical damage to the disk.

  Hello
  In this case, it seems to me that the drive itself is damaged. For this purpose, it is likely that there is no conventional solution through Windows itself.

  I suggest you seek a professional store of COMPUTING, or computer confidence. If information on this drive is still recoverable, it will probably take advice from specialized professionals and know how to do really.

• How can I reformat hard drive, LaCie Rugged All-Terrain?

  I was using the LaCie Rugged All-Terrain Hard Disk to back up my MacBook Pro.  He has stopped responding to Time machine.  Does not recognize it when I plug it.  I replaced it with a Seagate, but would like to reformat the LaCie and see if it will work.  When I plug the drive into the usb port, the Mac does not meet the LaCie well I can hear the LaCie.  Any help would be appreciated.  Thank you.

  Hi TreeTipsx2,

  I understand that you want to clear your LaCie hard drive. I know it's important to have control over your data, so I am pleased to provide you with information to help with this.

  Although he is not able to see the hard drive in the Finder, you can always delete it if we see it in disk utility. Read this article on the subject:

  Disk utility (El Capitan): delete a volume

  Thank you for using communities of Apple Support, cheers!

• I have a 2009 17 "MB pro 512 GB HD, it begins to run slowly. Is there a reliable program that can wipe the hard drive.

  I have a MB pro 17: with a hard drive, 512, he starts to run a bit slow. All the updates are installed. Is there a reliable program that will wipe the drive. «also it is an advantage to have a replacement disk SSD.»

  Performance issues, too full hard drive, lack of system resources, too old

  are obsolete applications, old parts of system of earlier versions (or is no longer valid)

  all the reasons to be aware of what to do.

  If the hard drive is too full of content, you will need to choose what to keep and what to

  Remove; an archive external and another drive for backup (recover or restore) are

  a few things to invest in and learn how to use Time Machine, OS X Recovery, and

  maybe learn to make, test and use full Clones of the OS X system.

  • Guides to tech - Malware, Adware, Performance - thesafemac

  http://www.thesafemac.com/tech-guides/

  You may obtain and use report generators software that is non-invasive, to see a

  General overview of where system resources are allocated; Etrecheck...

  http://etrecheck.com/#about

  Avoid 'cleanmymac' or 'mackeeper" and other items that are made to rip you off.

  There are a few software uninstaller that can help eliminate some software,

  those who are usually free like AppCleaner, among others that can be used

  with caution. There are a lot of unknown content in a non - casual

  technical users, who must be in the Mac OS X for the computer to operate.

  • Applications can affect the performance of Mac, battery, temperature and fan activity - Apple Support

  How to completely remove applications to OS X with AppCleaner (and maybe mess to the top of your Mac)

  http://osxdaily.com/2012/02/15/delete-applications-Mac-OS-x-AppCleaner/

  Some of the things there can be dangerous; If tread with caution...

• Babylon browser hijacking took my firefox. I deleted all the files I can from my hard drive, I went to about: config, sought to Babylon and reset the settings, but he always comes back. How can I get rid of Babylon?

  I tried malwarebytes, it can't find 'mywebpage' bugs, but I deleted them too. Also, I did a scan of my hard drive and remove five files that all "Babylon" they contain. It still comes back over and over again.

  See:

  • http://KB.mozillazine.org/Preferences_not_saved
  • https://support.Mozilla.org/KB/preferences+are+not+saved

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• Portege M400 - Windows 7 does not see HARD drive

  Hi, I have the problem, I am trying to install Windows 7 on my M400, but he didn't see the hard drive.
  The hard drive is surly ok, ' couse I tested it in the other netbook, I can see it in the BIOS, but any program installation can not.

  (I tried both Ubuntu and XP Tablet Edition)

  Hi Radzik,

  I think that Windows doesn't see the drive HARD due missing RAID drivers Windows needs of these RAID drivers before you can install it because it doesn t contain these drivers for the disk HARD is not recognized. You can download the RAID driver from Toshiba Web site.

  You can then create a new installation disc using nLite with drivers or copy the drivers on an external floppy drive. Start Windows XP after you press F6 to load drivers from floppy drive.

  Check this box!