T530 can support 1 TB SSD?

Hi all

I was wondering if T530 supports the upgrade of 1 TB SSD?

See you soon,.

Stan

Hi the Samsung 840 EVO 1 TB SSD works perfectly in my 530

Tags: ThinkPad Notebooks

Similar Questions

  • Satellite A300-17 - can I go with SSD?

    Can I put a SSD for my computer and size is available?

    Hello

    Yes, you can also install an SSD HARD drive instead this should be no problem because the laptop support already SATA interface. So you need a 2.5 SSD that will adapt to your computer.

    The exchange of HARD drive is described here:
    [Satellite A300 - how to replace the first HARD drive? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=127]

  • Can I add an SSD for my P775 program Satellite?

    CAN I ADD AN SSD TO MY SATELLITE P775 PROGRAM-112 WITH THE HELP OF A KIT OF TOSHIBA?

    What kit do you mean exactly?
    The laptop supports a SATA controller of course you can replace the HARD drive with a new drive SATA SSD 2.5.
    I did it in the past with my laptop.
    I used a Samsung 250 GB SSD 840 series

  • For the installation of the satellite P850-30W system - can I use a SSD

    Hi all!

    Telephone tech support couldn't give me an answear good so I try my luck on this forum instead.
    I just bought a Toshiba Satellite P850 30W and what I understand there is a m-sata port available.

    My question is: is it possible to put for example a CRUCIAL RealSSD M4 SSD 128 GB mSATA in this machine, install W7 on it and use it as a OS disk? and use the 2.5-inch slow for storage disk.

    I don't want to buy a new sata m before I know it is doable, I would also like to know the best and easiest to do this, seen a lot of different approaches in different forums.

    IF I install w7 on the m-sata drive can I use the series key provided with the preinstalled windows or what I call MS?

    Thanks in advance for your help :)

    Hello

    The P850 Satellite supports the common SATA controller.
    You can use a common SSD 2.5 drive, that support the SATA interface.

  • HP Elitebook 9480 m: HP Elitebook 9480 m can support disk HARD 1 TB 9.5 mm (height)?

    Dear support,

    I have just bougth HP Elitebook 9480 m which has 180 GB of SSD. I want to upgrade to HDD 1 TB 9.5 mm (height). I have just replace SSD with my old HARD 80 GB drive.  But he can't close the back cover (disk, back cover). The system can detect my new HARD drive.

    I was wondering, my laptop can support HDD normal 9.5 mm (height).

    Can you give me a suggestion?

    Thank you.

    Hello

    Page #39 his manual, looks ONLY 7 mm HDD suported. In theorey, it can support 9.5 mm HARD drive, BUT as you can see, 9.5 mm HARD drive will not fit.

    Kind regards.

  • SATA 3 Support for one SSD on a HP Mini 210-4120ea

    What SATA is the HP Mini 210-4120ea is supported? the manual talks about generic SATA without any specification?

    Will be a mid-range SSD go has the size or it will use well?

    Finally, it's a record of 2.5 inches that will be replaced or a 1.8?

    Thank you very much!

    N

    You are the very welcome.

    SATA II is a 'bonus' on SATA - in particular with regard to an SSD.

    Yes, your drive SSD SATA III will work very well with the SATA II controller, but you may have been able to save a little money if you can get a SATA II SSD - and I only say that because there is no advantage in having a SATA III SSD in your laptop on a SATA II one.

    However, one day you can transfer your drive controller supports SATA III SSD SATA III on a PC.

    Paul

  • ENVY 15 t-K000 CTO: ENVY 15 t-K000 CTO support M.2 ssd?

    My laptop is ENVY 15 t-K000 CTO, model number is G0T55AV, the material information is as follows:

    • CPU i7-4710HQ
    • 16GB memory
    • HARD DRIVE 1 TB

    I want to add an ssd for my laptop, I wonder if my laptop supports m2 type SSD, and, if the answer is Yes, what the maximum length of M.2 ssd supports? If I add a SSD M.2 and keep the 1 TB HARD drive, is possible to leave the SSD to be the first boot device?

    The service manual says:

    Storage SATA m2 (Port0)

    The manual

    The manual shows not yet how to get in MSSD and I can't believe that this means that you need to remove the motherboard. I think you can see M.2 on page 79 near the RAM slots.

    256 GB MLC (not shown) 766593-001 mSATA SSD drive

    It's the only picture I could find the part:

    This is a package of 42mm. In your model, there would be the possibility to start from the WSSD m2.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • iPhone 5 can support Bluetooth 4.1?

    iPhone 5 can support Bluetooth 4.1?

    New Bluetooth wireless headsets were 4.1 and 5 of the Iphone with iso 9.3.2 can support?

    sure helmets are backward compatible, so if they take care of A2DP and they also support the profile on devices with older bluetooth support bluetooth a2dp profile

  • HP ENVY m6-1232ea: can I add a ssd sata-m and can be larger than 32 GB for my HP ENVY m6-1232ea

    Can I add an ssd sata-m and can be larger than 32 GB for my HP ENVY m6-1232ea there a processor i5 - 3230M

    Thanks in advance...

    It can be larger than 32 GB, but it is not the boot drive and its only real function is as a cache of acceleration for the main mechanical hard drive, for which really impossible to use something bigger.

  • Qosmio F60 - 14K - can't boot from SSD drive

    Hello

    Im trying to install a new SSD, but can't, because I can't boot from SSD disk, "Insert a system startup disk" works great as a USB key, even installed Windows 7 top and tried to boot from it, but with a bit of luck.

    I have not tried to switch between IDE/AHCI, but that, because I don't have this option in BIOS. I think I've tried everything I can test, all the tips/help would be much appreciated!

    And so the part of the BIOS by joke to call bios all you can change the settings of the clock and the bootorder more or less!
    Anywhy for more options?

    THX

    Henrik

    Hey Buddy,

    I'm a little confused about your ad m... You wrote that you have installed Windows 7 on it, but you can t boot?
    You get an error message during installation or what exactly is going on?

    Have you ever tried to restore the factory settings of the recovery on new SSD disk?

    Hmm I put t know what BIOS options you want but I think Qosmio F60 BIOS has enough options.
    Normally with the BIOS default settings everything works fine.

  • What is more, processor Satellite C660-2LK that can support?

    Hello

    I was wondering if someone would be able to help me get a new processor.
    I was looking at processors intel and made a thread asking if I could get a certain processor, I got a response to which processors intel made port in my laptop but it says I have to ask what the higher than my laptop processor is able to support.

    If someone can tell me what that highest processors my laptop can support thank you.

    The manufacturers of portable don t support the upgrade of the CPU and so there is no information on the possible and compatible processors.

    But the fact is that a CPU upgrade depends on some factors of view: the new processor must be supported by the chipset which is part of the motherboard. Second, the BIOS must support the new processor.
    In the case where one of the parties would not address new CPU, the laptop would not work.

    So first I would recommend you to check the chipsets support.
    The camera seems to support the Mobile Intel HM65 Express Chipset
    On the Intel Ark page http://ark.intel.com/products/52808 under the point-Compatible product, you will find compatible processors and supported.

    But even if you want to use the CPU supported by the chipset, there could be a compatibility issue with the BIOS. I have no idea of which processors are supported by the BIOS because as I said above: this information aren t published by manufacturers of mobile phones.

    That's why these updates of the CPU is always risky.

  • Can I add an SSD to envy 15?

    Can I add an SSD to envy 15 or do I have to replace the original disk?

    Yes assuming that the SSD is large enough to hold all the data that was on the old disk, you can 'clone with resizing' from the old drive to the new. I use Acronis to make, and they offer a fully functional 30 day trial that would work to clone a drive. You will need an adapter usb to SATA to hang the new disk on the computer and access to the cloning procedure. On an SSD, but you are probably going to be cramped for space and you can just do the recovery with just the c: disc / > image drive and install the OS on the SSD using these discs and forget not to have a recovery on the SSD partition. If you do this, you should not buy an adapter usb to sata. You could also just clone the C:\ > will lead the SSD using acronis and keep the old drive to use for recovery if you need to do it later.

  • ENVY 15 t-AE100: Wireless card upgrade - HP envy 15 can support Intel when technology?

    I want to connect my laptop to a docking station.

    The seller sugest me a wireless docking station.  I have faith in him and has no compatibility checked by myself.

    I spent $ 300 on a home wireless network... then I realized that my laptop do not have a compatible card when.

    Currently, my laptop has Intel Dual Band Wireless-AC 3165 NGW 802.11 HQ and according to intel web page, I need a

    Intel Wireless Triband AC 18265.

    I would like to know if my HP envy 15 laptop can support Intel when technology?

    Thanks in advance

    Hello! @PPBog, thanks for the reply.

    No, you can't replace the card wireless when mastering.

    I would like to know if you have any other question!

    Have a great day!

  • Can we add an SSD via Bay adapter on the W510?

    Hi people,

    Can we add an SSD in the W510 ultrabay housing?

    TIA,

    SD

    What operating system do you use?

    If Vista or XP pro, right click on the my computer icon, click on manage, then you must activate the SSD.

    If you use Windows 7, in the search box, type disk management and activate the SSD to use.

  • What is the maximum RAM for each location dimm can support for desktop computers Compaq Presario CQ3541L?

    I have a 32-bit ubuntu 12.04 OS installed on Compaq Presario CQ3541L desktop PC. Now, I want to update higher along 64-bit ubuntu 12.04 OS memory RAM. I want to know what is the maximum size of the main memory that each DIMM DDR3 slot can support. I need at least 8 GB of RAM since the apps I run will consume as much as 6.5 GB and probably more.

    Thank you.

    Yes, that's the conclusion I came to.  You can always try to see what is actually happening.  I had a different motherboard (again a HP) which had similar limitations except his max was total 2 GB, and he saw 4 GB very well.   They make a slightly different version of this Board with 4 memory locations, instead of both yours has, then who knows until you experimant.

Maybe you are looking for

  • start page for Firefox has undesirable video - how can I remove it?

    I installed Firefox yesterday. Everything is OK except the splash screen (home page) has a video on it. I played and I now want to remove it.

  • an av playing on a windows pc

    HI - can someone tell me if this is possible.  I created an Audio/visual presentation to our camera Club, but they have to play on a windows pc.  I tried, but it will not work, is it possible to do this please?  The file has been created using openin

  • I subscribe to iTuness game to use a song on a slideshow?

    Is there another way, where I can buy a song to use on a slide show for private use?  My problem is perhaps simply that I don't know how / where to record the song I bought on iTunes.  In pictures, my pictures that I use 'Create Slideshow' choose and

  • 8 flow accidentally uninstalled HP pilot broadband!

    Hello friends and HP! I have a problem. I fished around with my mobile broadband in the Device Manager and accidentally uninstalled the driver! Now, all that I have left is an adapter to wide band generic Mobile that won't turn on (error code 10 this

  • Multi graph display interface

    Hello everyone ,. I work with 8 analogics signals through aBNC-2110 reprensented as a waveform in my design. The user wants to choose and display up to 4 of them in a box. I am currently implementing a statediagram to choose what graph etc. To displa