T61 hot market?

I have a t61 7665-d61 and it works if hot it's sore to touch my father has a t60 and when it is full of breath is always nice and cool why it is that I'll post the top and my warranty went if Lenovo will not solve it will they?

idk how to put picture here is is tinypic

http://Tinypic.com/r/2q08rqa/5

parmardilan wrote:
where can I find thermal past and how to apply it

Here's a guide written by Mark Lenovo and myself, it's on swap of CPU, but if you go down to the bottom, look in the 'pdf guide', it is made especially to replace the thermal paste.

http://forums.Lenovo.com/T5/T61-and-prior-T-series-ThinkPad/T61-CPU-swap-compatibilty-Merom-and-penr...

You want to get is "Artic Silver #5", you can find it on Ebay or Amazon.com. Clean old dough your CPU and GPU, then clean with a soft cloth and a little alcohol, don't use alcohol with essences or oils added, get pure, as hard as you can get.

Apply sparingly, only the size of a grain of rice, then spread it on the chip. When you reinstall the heatsink, you want covered as little as possible. Well stick and you can overheat and little things and you have the same problem. If you are not comfortable, so do not, find someone who is.

On the subject of your time, they are not extremely high, but it is strange that your GPU is higher then your CPU. Now after many hours of use, my CPU is 63C, my GPU is 52c. If I run graphic games/applications, my CPU will reach the 80 low and give the My fan at high speed, the GPU is rarely more than 70, so if your readings are correct, you have a bad contact on your GPU, but I suggest you to uninstall this application of fan and try thinkpad fan (TPfancontrol.com) control. It of freeware and when your temp is high, assign the (7-speed) manual and they have cool fast, if it is not, then your radiator/fan does not work as it should, and if you have a GPU nVidia, your in danger of frying your chip, which means that you will need a new system board.

Good luck

Tags: ThinkPad Notebooks

Similar Questions

  • Mac Pro 2013 become hot, not answer and stop.

    Hello

    I have a 2013 Pro Mac, I bought as used before 5 months and he was well, before 3 days, the weather was warm (approx. 28 °) and under normal conditions, use my Mac Pro start freezing and not answered every 15-30 Minutes and automatically stop or I have to disconnect the power cable.

    I started looking on the problem, I checked the bodies of the Mac Pro and I found it very hot, the fan worked but slow, I searched on Google on a tool or a command I can do the fan faster and I found an application called SMC FanControl, this app showing me that Mac temperature of 48 ° also with this app, I was able to turn the fan to Max speed, I heard the noise of the fan, it worked perfectly with this app. The Mac Pro early to work perfectly also with in normal and hard jobs.

    Yesterday, I decided to clean all of my Mac Pro material, maybe that this solves the problem, it was dirty, and I did as new as you can see in this picture:

    I also used for better CPU and GPU thermal compound I found on the market.

    BUT the problem came with the first video editing, 48 ° c, closing down and not be able to turn it on for 5 Minutes.

    The question is: why my Mac Pro not control the fan automatically? is it a software or a hardware problem? If the material someone we know exactly?

    Best regards

    Which component was 48 c?

    What was the hottest component?

    It's not hot at all.

    From now on my MP 2013 with base CPU, CPU ITPP and CPU sensors 1-4 are about 100 ° C and speed of 84CFan two GPU time 1750

    • Record the time of the next frost. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of freezing. Suspicious message here.

    Search before the journal entry that begins with BOOT_TIME since it is the first line of a startup

    Apple cannot help you because you have disassembled the Mac.

    You already reset the SMC to take part. try resetting NVRAM/MRTP memory

    How to reset the NVRAM on your Mac - Apple Support

  • Equium A210-1AS - it gets hot after BIOS update

    Hey, I was wondering if anyone can help here...

    Currently have a Toshiba Equium A210-1AS with BIOS version 1.80 worm 1.00PARTTBL 08/04/2008.

    Given that BIOS has been updated for a long time in this version 1.80 the computer became hot very quickly and therefore the laptop performance declined.
    I looked on the Toshiba support site and upgrade only version 2.00 was not compatible with this laptop.

    Any help would be greatly appreciated. Short model number is PSAFJE
    Thank you

    Hello

    I checked the site Web of Toshiba and I didn't see any BIOS update for satellite A210 PSAFJE. This means that an update of the BIOS was never marketed for this laptop, normally.

    To me it sounds like that you have updated the BIOS with one version for another Equium A210. So, you should go to an authorized service provider. Technicians can install the right version of BIOS for you (downgrade).

    Good bye

  • T61 usb3?

    Hi all, I was wondering if anyone can recommend a decent 2 or 3 port USB3 card Express, Ive heard nasty things about cards too hot AKE and just not not not to mention nightmares driver with them.

    Anyone with a decent success with USB3 express card?

    Finally you need to power the device via an existing usb2 port? I'd rather a card that powers itself and not use an increase in 1 of my usb ports existing if possible.

    Anyone with a T61 that can help me with this?

    Thank you.

    Hello

    No specific recommendations, but each card AKE I have seen used the Fresco Logic chipset, so I would say in ensuring that you purchase contains a chipset Renesas Electronics (formerly NEC Electronics).

    Kind regards

    Aryeh Goretsky

  • ThinkPad T61 T61p radiator upgrade.

    Hello

    My Thinkpad gets uncomfortably hot in programs such as Photoshop, Dream Weaver and some games. Update the old heatsink to a T61p radiator would help to reduce the time. I clean the portable regularly (every 2 months or more) and run TPFanControl but he gets up to 80 c time.

    Data sheet: Core 2 duo T8300 2.4 Ghz / RAM 4Gbs and the legendary Nvidia nvs 140 m chip.

    Thank you.

    ~ John

    johneasthamx40 wrote:

    7663. 11 G

    It's the original configuration:

    ThinkPad T61 (7663-11G)
    T7100(1.8GHz), 1GB RAM, 80GB 5400rpm HD, 14.1in 1440x900 LCD, 128MB nVIDIA Quadro NVS 140M, CDRW/DVD, Intel 802.11agn(n-disabled), Bluetooth, Modem, 1Gb Ethernet, UltraNav, Secure chip, Fingerprint reader, 6c Li-Ion, WinVista Business 32
    

    Renewing the thermal paste would be my first recommendation. And it's a case of AS5 ;-)

  • T61 issue of Fan: turns silently to the POST, and then never...

    All,

    Any thoughts on what is happening here?

    I have a T61 with a 15.4 screen "and the Intel video subsystem. After about 10 minutes of operation under Windows, the system shuts down, and after that my wife brought this to my attention, I have observed that there is no flow of air coming out of the vent and the underside of the computer is very very hot. Fan death, right?

    So, I open the T61 upward, leaving the trackpad and keyboard connected and turn on, hoping to check a fan of bad/loud/clogged. Well, the fan starts spinning at the POST and it does so freely and so in silence, and after a few seconds, it turns down, never to go back to the top.

    There is no error message FAN ERROR on the screen at the POSITION either.

    This seems to be more a problem of controller fan than a problem real fan.

    Someone at - it advice or ideas?

    My gut reaction is that simply replace the fan will translate the new fan does exactly the same thing, but maybe someone can put me straight or share their experiences similar here with me.

    Thank you

    Warr

    Turn down the fan after POST is normal, but it should turn on again during or after startup.

    Please check the fan side, if they are blocked by dust. Block the propeller fan with a match or tooth-pick and blow compressed air from the outside through the sides into the heat sink.

    You should also take a look under the radiator and replace the thermal paste on the processor by a new. You can leave the thermal pads if they are not damaged.

  • Where can I buy a replacement of the Thinkpad T61 fan?

    Where can I buy a replacement of the Thinkpad T61 fan?  I looked everywhere in the Lenovo site, and I can only find the referenced part number, not a place to buy it.

    When I opened my Thinkpad, the fan, he said:

    Lenovo-P/N 42W2461

    FRU P/N 42W2460

    Everyone here has already tried other merchants successfully (eBay, etc.)?

    (I am out of warranty and the fan is noisy when it is hot, unlike when it was new, and I sometimes "Fan Error" at startup in the BIOS).

    Parts of IBM in the United States sells these fan parts, many fans on ebay are refurbished or from broken machinery (the fan should work fine).

    I think that IBM sells the fan for about 50 to 80 USD, including delivery by mail.

  • ThinkPad T61 starts slow!

    Hey

    I bought at a flea market T61 a couple of weeks. That's why I had a T60. I replaced the bio by an OCZ Vertex 96 GB HARD drive. I put the SSD in the 'new' T61, but it start a bit slower then my T60. I did everything what you need to do to properly use a SSD (ACHI, windows, TRIM, indexation,... etc.)

    I made an update of the BIOS a few days ago, but it has not really helped a lot... Is it worth / worth the risk to update the Beta BIOS that allows speeds of SATA II? (or just "rumors"?)

    Then I got this too:

    http://www.YouTube.com/watch?v=RtuVy-XwXYY

    One of my friends says it's the WIFI card making this "electric" sound, simply because it has been used for years. Replacement he'll fix it he told me... I'm going out for a second and check if the sound lights. But if this is the case, what could be otherwise?

    Thanks in advance!

    Data sheet:

    14.1 "1440 x 900

    T7700

    NVS140M

    3 GB

    OCZ Vertex 96 GB

    7 ultimate x 86

    WIFI

    Bluetooth

    There is no "beta" bios, there is only the official Lenovo bios that disabled your controller hard drive SATA2, forcing them to run in SATA1 mode, or a bios changed when a 3rd party defeated that lenovo has done to turn off the controller. I will not recommend you should use because if you have to ask, then you don't know enough to make an informed decision, but if you want to get sata2 speeds, you will need BIOS of middleton. If you're resourceful, you won't be hard to find.

    Your system should boot fairly quickly with an SSD, if it is not, there may be some settings slow you down. Try resetting the bios default settings (F9) and then save and exit (F10) and see if that helps.

    About your noise, don't really know, but you can have a read here...

    http://www.ThinkWiki.org/wiki/Problem_with_high_pitch_noises

  • T61 model 7662 lack a screw

    Hello

    I bought a new T61 7662 model last week and it came with a screw. The screw under the DVD Rom is missing. I can see the son of brass inside the empty location. But the screw is missing. It is noraml? Or a flop in mfg line? I bought another T61 in April 2008. I checked it now and it also lacks the same screw just right under the DVD Rom.

    ramspc, welcome to the forum,

    correct screw is not mounted at the factory, have a look in the box in which it came. With a small bag with spare TrackPoint CAP there should be a small bag with two screws in there. One is for the optical drive, fat runs, to prevent the reader is hot-swapped. The other is to replace the screw in the hard drive with a hex head instead of a cross-head.

    Hope this helps

  • iPhone 7 - 10.0.2 - would not connect to wifi - got hot - DEATH

    I have an iphone brand new 7 (black) who has not seen a bump, the knock, the drop of water, or frankly anything that could damage it - always used with Chargers apple and cables only. I came home one day and noticed that my wifi woulndt connect. He would not even see the networks. The phone started to get hot and the battery percentage began to collapse, down 80% to 0% in about 15 minutes.

    When I tried to reconnect to the power, it will not even turn on, nothing, no display showing load or anything like that. Just completely dead.

    Ive owned every single iphone (except some S models) and have never had this happen. In fact, I could plug in my iphone 3gs right now and I'd be willing to bet $100 it load up and turn right into. Im just stunned, having given apple credit both for making bulletproof devices for years.

    What's the deal? anyone else having this problem? Ive looked online and I can't find anything. I have a genius appt tomorrow and Im prayer I can get a replacement same day. I have applecare +.

    Thank you

    George

    If there is something wrong with the device, Apple should replace it. However, they have the final call, and no one here can say exactly what they will do. Given the age of the unit, I suspect that you won't have problems getting a replacement. They should have stock for replacements. I wouldn't worry.

  • Since the upgrade to Sierra - my CPU runs hot

    Recently, I used the app store to upgrade my MacBook Pro for OSX Sierra.

    From this point forward - my laptop is very hot and fans constantly run like a Jet engine.

    I see this in the activity monitor:

    I put all my contacts to synchronize hourly, and nothing has changed before the upgrade and after.

    How can I fix it? My life of the battery is to be purged, permanently.

    Any help appreciated.

    Thank you

    Amit

    Director general of Tallyfy - cloud-based process management

    Try restarting in safe mode (hold down the SHIFT key while booting). The problem persists?

  • MacBook Pro 15 "retina run hot.

    Hello

    I bought my macbook pro ' retina of 15-inch (model 2015) in July and I had to install windows I did of the hollow windows, but when I'm coding stuff like C++ it turns really hot and the fans will too, even when I am just watching youtube or netflix on windows. " On macOS, it only runs warm while playing games (which is obvious no?) I hope someone can answer to my problem!

    Thank you already!

    -Lars

    What temperature?

    Install a temperature/fanspeed control application.  Maybe you use resources intensive applications but you can still be found within the limits of acceptable temperature.

    Ciao.

  • 7 iPhone gets really hot

    I bought a new Iphone 7 a week ago and I noticed that the device gets really hot when I use snapchat or there are 10 applications running on the background, I really don't understand this problem on my 6 s Iphone I hope someone will fix this as soon as possible, I am very worried. your

    I am also having the same problem. Run ridiculously hot and battery only for half a day, if I'm lucky. I've had the phone for 2 weeks now. My IPhone 6 never had these problems, and the battery should last the whole day without incident.

    I tried to disable the notifications push and push mail in hope, this may solve the problem, but using the phone this morning the phone become very hot and went down to 10% in charge while checking a few emails. It's certainly not right. I posted a complaint on the Apple Support page. If all goes well, they will be able to do something on this issue, because there is clearly a problem across many users. I've just updated my phone to 10.0.2 in the hope that this can help. Fingers crossed!

  • Hot corner Windows Application

    Hello
    Just got my iMac after a few repairs.
    They set up the Sierra for me.
    Now, when I was in El Capitan hot corners for windows Application would display all of the windows open for all open applications. I find when I do now, in the Sierra, he shows that the active window before?

    This seems useless, as I am already with that. How can I do be defined to display all open windows?

    Thanks in advance

    Hello Rob Snow.

    Thank you for reaching out to the Community Support from Apple. I understand that you are trying to implement your active corners, and I'd love to help. You can customize what your active corners show by going to System Preferences > desktop and screensaver. Click the screen saver tab, and then click the corners at the bottom right. Here, you can select another function for each corner (or leave the field blank). To view all your open applications, you can select 'Mission Control' on any angle you like.

    If the behaviour continues or if you encounter difficulties, the entire community is here to help.

    Best regards

  • MacBook Pro mid-2012 running hot (MacOS Sierra)

    Hello

    I have a MBP mid-2012 13 inch with 16 GB. of ram and a 500 GB. SSD

    I had it set up with boot camp and dualboot El Capitan and MS-Windows-10

    Everything is working, all the features and functions in the two operating systems.

    I was very pleased with this MBP.

    Recently, I put a new battery in it and upgraded to Mac OS Sierra.

    Since then the MBP runs hot.

    It heats up very quickly.

    Is this a common problem with macOS Sierra?

    Or do you think that the NEW battery maybe causing the MBP get HOT?

    I use an adapter to power 85 watts OEM.

    The battery seems to work fine.

    Several demons as mdworker are running to set up the Sierra which CPU load until adjustment ended.

    You can check with activity monitor.

Maybe you are looking for

  • Why my 'new' Menu button looks like this?

    http://IC.pics.livejournal.com/trickykitty/5924549/50028/50028_600.PNG I can get to General gripes about it being on the right AFTER I understand why he is messed up in the first place.

  • strange usb performance disparity

    I was using a USB - 6221 BNC to control experience. Control, written in C++, software runs as a process from command line in Windows and is quite simple in its basic approach. It uses a polling loop to constantly query a single channel of analog inpu

  • G6-2330sw Pavilion: not detect the total amount of RAM

    Hello! Today, I decided to change my RAM from 4 GB to 8 GB. And when I planted 8GB, bios, System everythink he would read only 4 GB. This RAM its good because its Impact HyperX H316LS9IB/4 and on my laptop Asus mother his job very well. I'm trying to

  • the administrator account deleted, andf the network path is missing

    locks of administrator that it is everywhere in the things of files I can access and I can't have any idea how, also when I click on the drive c system32 he says correctly entered network path or its lack

  • WAP371 SSH (disabled by default) and explanatory TAC...

    Chaps, I just bought yesterday WAP371 and I really want to have my AP under SSH control. Can someone tell me how I could enable future on my WAP without losing my 'guarantee' that claims of TAC only L2 of TAC may have this access no person nor for th